Barcode Printing in Pick List

Hi,
The issue is I am not able to print barcode in Pick list (LK01) belongs to Plant 'B' whereas I am able to print barcode in Picklist belong to Plant'A'. I am using the same HP printer which supports barcode printing for both the above instances.
I am not able to figure out the reason for this.
Thanks & Regards,
UK

Hi Vivek,
Thanks for your kind response.
The barcode box is ticked for the said combination.
The Printer CT3FM is located in Plant 'A', so the user who sits in Plant 'A' want to print the Pick List of a Process Order belongs to Plant 'B' (Testing Purpose).
The barcode facility currently being used in Plant 'A', the client wants to implement barcode printng in Plant'B' as well. So before setting up a printer with SIMM card in Plant 'B' they want to test whether it works fine with the existing CT3FM printer in Plant 'A'.
Thanks,
UK

Similar Messages

Printing the Pick List at operation level

Hi all,
Is it possible to Print the Pick List at operation level.
Components are assigned to each operations and release of production order takes place at operational level. Once operation is released then only relavent component assigned to that particular operation should come in pick list.
Thanks in advance for your time and efforts.
Regards,
Siva
Edited by: Siva Kumar M on May 19, 2008 3:40 PM

Hi ,
System will not select the Opertaion which has status CRTD by default.
For further selection please try with below settings. ,
Profile = std profile
Production Order Number,
Selection at Operation level
System status = CRTD and Actiavte Excl .check box.
Now system will display the pick list for released operation and it`s component only
Please check, Reward if it is useful.
Pradeep
Edited by: Pradeep Kumar on May 19, 2008 3:45 PM

Print the pick list

Hi,
how can I print a pick list in WM.
thanks

I have created a delivery and the message for pick list must be printed.
The message ist EK00 but it doesn't work. How can it customize it to print my pick list.
Thanks

Print Delivery Pick list.

Hello,
As per my business process, I would like to print delivery pick list by transaction VL70. We did created new output type YM00 same as EK00, and assigned YM00 to form (New pick list program).
As of now, we do not have TO created. We just have open Delivery ready for picking. Now i do want to print delivery pick list, so based on Pick list i can start my picking and create a TO, with reference to what i have picked.
Issue - I do not know configuration setup from WM side. What needs to be configured and how to print pick list. I do want my pick list to be printed at storage type level.
I have done setup with NACE in past, But i guess as of now we can not do setup in NACE dues to SAP upgrade. (As i was told)
Can any one help me?
Smit.

Hi Smit
if you want setting for EK00 then please follow the below mentioned steps
However looking at your thread it seems you want a picklist which should have the storage type / storage bin detail from where you can pick the stock.if my understanding is correct then you have to create Transfer order against the deliver and look to print the Transfer order detail using T-code LT31
Necessary configuration detail for the same is under node
T-Code : LT31, enter the warehouse, TO number , Print code, Printer and Put a check mark on TO document and press Print button from menu bar (Transfer order option) this will give you the detail of Transfer order (storage type , bin material qty based on which you can do the physical picking from the warehouse) if standard SAP form is not meeting your requirement you can always look for custom form and assign to the above print code

Printing the pick list from the delivery automatically

Hi All,
Please let me know how to do the : Printing the pick list from the delivery automatically ?
Thanks in advance.
Regards,
Nagaraju.

hi,
execute VL70.
balajia

Printer for Pick List

Hi,
Just want to know if there's a way I can set a certain printer for Pick List for a certain Distribution Channel.
if useful.
points will re rewarded.
else.
do nothing
endif.
Thanks.

Hi,
The Pick List is printed from the Pick and Pack Manager.
goto Inventory > Pick and Pack > Pick List and then Open the Pick List and Print from there.
If this is what you are doing then if your FMS are set to Auto Refresh then as soon as your Pull the Pick list the FMS should fire and the mode should change to UPDATE.
Also, u can try this.
You can print the pick list from the Sales Order by selecting Pick List as your default report. Everything works fine from there. I don't have to do anything else then the sales order to get the Pick List right. I only have to select which file I want to print.
hope this works 4 u.
cheers,
Hema.

Configuring printer for pick list

Hi All,
please let me know how and where do we configure the printer for a pick list.
thanks in advance for your help.

Hi Friend,
The printer configration will be done not only for Pick list, it will be for PACK LIST, invoices, ORDER CONFIRMATIONS, DELIVERY NOTE,
For any activity we need to configure the printer in Spool Administration via the transaction code
SPAD.
Please revert back if u need any further clarification,
santosh

Re-printing of Pick List

Hi Guruz
Can you please tell me how do I re-print the pick slip. Is it possible to print pick slip second time?
I am using T.code VL02N
Many thanks

Hi,
Re-Print you can do even from the PRINT PREVIEW of the Delivery document
Goto the VL02N and enter the Delivery document---ISSUE OUTPUT -> print preview
Now click on Print and you can get the print
If you are doing Automatically by bath job, then Re-Trigger the OUTPUT and the Job will process and send this to Printer.
In the CONDITION RECORDS put the Number of messages as 3 ( if u need 3 prints)
Please check those options and let me know if u need further details
thanks,
santosh

Error printing pick list from IW32

Hi all,
When trying to print pick list from transaction IW32, I get this error message:
Express document "Update was terminated" received from author ...
When I checked out this error message in SM13, I found this:
Transaction code: IW32
Module name (function): PM_ORDER_PRINT_CONTROL
Status: Update was terminated
Raise exception: KEY_NOT_FULLY_SPECIFIED (Complete key not entered)
The shop paper (pick list) is customer defined (Z*) under application area O (Maintenance orders). This shop paper is set up to print to a certain printer, P1, and printing other PLM documents on this output device works fine.
Does anyone have an idea what can be causing this error?
All helpful answers will be rewarded.
Best regards,
MV

Hi,
I have tried to print the pick list several times, in development, test, and production systems. It fails with the same error each time.
Do you have any ideas why this error occurs, is there any special IMG activity or PLM configuration that I could check to see if some printer settings are wrong?
Regards,
MV

Printing problem for picking list

Hi friends,
Whenever we print the picking list of material with batch number. the printing job will bring a extra page with basic form information . it's kind of wasting the paper since the extra page doen not contain any specific picking informations. This issue only happen to picking list with batch number applied material . The extra page won't be printed out once the material is not subjected to batch management.The form style should be script form.
Please kindly advise if you have any suggestions.
Thanks,
LG

Hi,
Assuming printing job is batch job. Normally batch job executes a program (you assign program to the batch job when you configure it) while you create batch jobwhile it is running. If you want the system to check the particular information (take the information if the so and so prerequisits matches if not ignore kind of) during the program execution you can do it with the hlep of a deverloper.
If you want to avoid unnecessary basic ifnormation it can very well be done with the layout changes in SAP script form and the program if necessary. Make sure you dont need those information as some times it is like a legal information like we see in the company signatures which seems like basic information.

Print Picking list for late operation in WO

Hello Experts,
I am not an expert in PP module, however i have a requirement to be able to generate a picking list automatically in a Work order for the components which are assigned to an operation that will happen in futur.
Let say we have a WO with 8 operations, and the operation 8 will begin 3 months after the release of the WO.
Does SAP manage in standard a printing of pick list for component that will be usd in WO at the last operation?
Thanks for your help
Regards

Hi,
Thanks for feedback,
As i understand, it is possible to release operation by operation in the work Order ? can you please indicate me how to perform that?
And if it is the case, does it mean after each release the picking list is printed?
As i know there is only one release flag (green) to release all the work order.

Pick list- Re-print

hi-
I have already printed a pick list for delivery.
Accidently the Document got shredded.
I want to print the Pick list again.
Any suggestions.
Steps: I did go to VL02n and try to use the functionality Picking out at header level, but the area is greyed out and does not give me the option to type EK00 to printout the Pick list again.
Any suggestions / recommendations!!!

Hi,
Also If you have configured LL01 report in your system you can take print out of pick list for the unconfirmed transfer orders again. In report you have to set up layout to take bin details.
Hope this meet your requirment.
Regards,
Prashant

Printing immedietely of Putaway list or Pick list in SAP WM

Hi
We have one requirement in WMS rollout is:
For automatic background printing of Putaway list or Pick list in SAP WM, System doesnt recognize Printer name as LOCL (settings in T code- OMLV). In OMLV we must have a network printer name for automatic printing the Putaway List after MIGO transaction and also for automatic printing the Pick List in Background with WMTA out put type - which triggers during delivery creation.
If we configure LOCL in OMLV screen the spool gets generated but it doesnt execute automatically and that needs to be triggered manually using T code SP02 or SP01.
We want to print these putaway or pick list automatically(either thru LOCL or network printer) immediate after generating a spool(without any user interaction).
Regards,
MM

Hi MM,
Inorder to get automatic put away list after GR you need to define the printer in OMLV settings.
Step 1:
If you are using Ricoh printer (Paper print out of TO) and Zebra Printer (Label printer for printing labels), you need define this combination under the icon "Printer pool/Labels".
Warehouse - Ricoh printer name - Zebra printer name (Pre-condition : Both the Ricoh and Zebra printers needs to be configured in SAP by your Basis team).
Step 2:
Under icon "Warehouse Movement" in the Assignment section, you need to define the condition for printing.
For example
Warehouse no: Source str type Destination str. type Printername
AB1 902 *** Ricoh printer name1
AB1 Q01 *** Ricoh printer name2
The above situation prints all put away list for receiving area to Ricoh printer name 1 & all put away list cleared by QA people to Ricoh printer name 2.
Step 3:
Analyze the condition set under the icon "Analyze" (print control tables).
You can re-check the conditions set by you in the above section. specify the warehouse number, source str type, dest. str type and execute you should be getting the printer name correctly assigned in the earlier section.
Hope the above explanation helps. Pls award points if you feel appropriate.

Trx for printing picking list and from this printing delivery note.

Hi,
1) what is the trx for printing the picking list?
2) what is the trx for printing the delivery note starting from a picking list?
Best regards

Hi,
T. code for Output for Picking list is VL70
T. Code for outputs for Deliveries is VL71.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen

Printing Picking List in WM

Hello,
I am facing issue with Printing of Pick list based on WM storage type.
- I am creating the O/Delivery then creating the 'WM ref group' and then Creates the TO against the Group. System create the TOs based on each Storage type (TO split function) but does not Prints anything automatically (I can print the individual TO manually using LT31)
But If I creating the O/Delivery and Creates the TO against Delivery then System create & prints the TOs based on each Storage type (TO split function).
-Even it is not printing the Pick list based on Storage type while using LT44.
Please suggest...
Regards,
JPS

Hi Greetings
Please check the following configuration settings.
Transaction : OMLV --> Spool code --> For the combination of Warehouse number and Spool control ensure the "Print immediately" check box is checked.
Gobinathan G

Barcode Printing in Pick List

Similar Messages

Maybe you are looking for