Barcode printing sapcript available in preview but not in print

We are trying to print Barcode from ECC 6.0 system but unable to make it ,
though we can view the same in Print preview , still we are unable to get the same
in the hard copy.Barcode is not present in hard copy
Below are settings
Device type: SAPWIN
Device class: stardard printer
Host spool access method : F
Host printer : Default
physical Printer : RICOH AFICIO 2018D
Do we need to keep barcode.DLL in desktop from where we are printing ?
Is my printer is compatible for barcode printing. ?
What could be the reason
Best Regards,
AjitR

In saplpd screen i am getting below mentioned error
12:59:26 PM)
(12:59:26 PM) Barcode DLL Version 3.7.1 (32 Bit)(Seriennummer 12006)
Defaults read from "barcode.ini"
*** Licence expires 23.11.2007 (day,month,year)***
All Linear Barcodes,PDF 417,Maxicode,Code 16K,Code 49,Datamatrix,QRCode
(C) 1994-2005 e-bizco.com GmbH, Grosshansdorf, Germany
http://www.e-bizco.com
Licenced to: Free Trial:hi
(12:59:26 PM) Icon DLL loaded.
(12:59:26 PM)
(12:59:26 PM) Network Communication via SAP-NiLib
(12:59:26 PM) Hostname: P057ITSP06C2360
(12:59:26 PM) IP Address: 12515096.2089886680.32.1223880
(12:59:26 PM)
(12:59:26 PM) SAPLPD Version 6.28 for Windows/NT (OPT) is listening
(12:59:26 PM) OS-Info: version = 5.1, build = 0/2600, text = Service Pack 2
(12:59:26 PM) Copyright © 1992-2001 SAP AG
(12:59:26 PM)
(12:59:33 PM)
(12:59:33 PM) Receive job for printer __DEFAULT (Berkeley LPD protocol / RFC1179)
(12:59:33 PM) send_status called
(12:59:33 PM) send_status called
(12:59:33 PM) send_status called
(12:59:33 PM) send_status called
(12:59:33 PM) send_status called
(12:59:33 PM) Job 000TxmPy.TST for user ABAP1 queued.
(12:59:33 PM) Start printing job 000TxmPy.TST on printer RICOH AFICIO 2018D PCL 6
12:59:34 PM) Error from BARCODE.DLL: -9: Bar Code Generation error (Invalid char for this Barcode?)(12:59:34 PM) Print-job 000TxmPy.TST, 1 pages finished.(12:59:34 PM) Elapsed time 0.188 sec (0.000 sec. used by windows)

Similar Messages

  • Standard text displayed correctly in print preview but not in print

    Hi,
    I have a script in which a standard text has to be printed in the output.
    The standard text contains some german characters.
    These characters are displayed correctly in print preview but not in print.
    The text is maintained in 3 languages DE,EN and Russian.
    The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
    Please suggest something.
    Regards,
    Richa Aggarwal

    Hi Richa,
    Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
    It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters.  If a character does not display then that means it does not exist in the font that you are using.
    Regards,
    Ryan Crosby

  • Chinese characters appear OK in preview but not when printed

    I am working on sap script .
    In which I am facing problem in printing Chinese character.
    In the spool(print preview) I am able to see Chinese characters printed but while printing on a paper it is appearing as '#' Characters.
    I am using Font Family as COURIER in basic settings and If I try changing Font to CHSONG(Chinese character font), alignment getting distorted.
    I have tried several options available in SDN, but not able to find exact solution on the issue.
    Please help me with proper solution.

    HI friend,
    Try changing the device type which suits the Chinese font. There are many device types which support device types.
    Example : CNSAPWIN.
    Just try this friend. If you face queries please revert back to me i will help you.
    Thanks,
    Sri Hari

  • Logo appearing in print preview but not in print for Xerox Workcentre M118

    Hello experts,
    I am not able to print logo(in .bmp) format in Xerox Workcentre M118 PCL 6 printer. It is displaying accurately in print preview. While taking print out only grey background is coming, no trace of logo. Can anyone suggest, what are the print related settings needed in SPAD or any other transaction needed to print graphics. The logo is coming accurately if it is stored in pdf and then printed.
    Regards,
    Debopriyo

    hi,
    To print logos using the SMARTFORMS, we need to first upload that logo onto the application server. The steps to upload the logo onto the application server are as follows:
    1. Go to transaction SE78
    2. Select the desired graphic in the tree (for example, BMAP)
    3. Choose GRAPHIC --> IMPORT
    4. Enter the name of the graph and the description
    5. Select the type of the image (black/white or color)
    Now the logo is uploaded onto the application server. To print this logo using the SMARTFORM, create a graphic node in the window and enter the name of the image you had just uploaded. Your logo should now print.
    Refer the following links.
    http://www.sapmaterial.com/smartform_example.html
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1255081,00.html
    Below is the link for print related problems.
    http://www.geocities.com/SiliconValley/Grid/4858/sap/Basis/printprobs_solutions.htm

  • Can't get airport express to print.  Music transfers wirelessly but not the print.  How do I fix this

    I cant get the airport express to connect to computer for printing.  It does connect for music but not printing.  How do I correct this

    Don't know, how did you hook it up (what kind of cable)? You can send audio through an HDMI connection provided a MacBook Pro is (I believe) from 2009 or newer.
    Converting to VGA or DVI will not send audio - if you're using that kind of connection, you'll need to add an audio cable from the headphones port.
    Also check the Sound Out setting in the Sounds panel of System Preferences.
    Matt

  • How do I get the print button to operate ? The print to file is litup  but not the print button

    The print button on 5.6 is darken out the print to file is not in either case they don't work.  I have a new Epson R 3000 that works fine with the Photo program on my iMac pro just upgraded to yosemite but do not think that is the problem.  Likely something did or did not do!
    len

    In your Print Job panel is a pulldown (near the top) called Print to:  Set it to Printer instead of JPEG file.

  • BARCODE PREVIEWING BUT NOT PRINTING

    Hi GURUS / EXPERTS;
    I have created a SAP SCRIPT FORM and Driver program for BARCODE Printing. Now my problem is that the
    BARCODE is appearing on screen (Preview), but when print system print numbers instead of BARCODE.
    Steps carried out: IN SE73: Create a SYSTEM BARCODE WITH NEW TECHNOLOGY, check the preview, it is OK.
    IN SE73: SAP SCRIPT FONT MAINTENANCE: Defined the prefix & Suffix (SBP26 & SBS02) for that BARCODE & DEVICE.
    IN SE71: created a character (BC) reich check the check box (Selection) and select the barcode.
    Use that character in script as    <BC> &T_BAR-CHARG&</>
    in SE38: use the driver program to call the script form: IT DISPLAY THE BARCODE, BUT WHEN GIVE THE PRINT- PRINTING THE NUMBER. 123456 - Where 123456 is the value of T_BAR-CHARG.
    Please help. or suggest where I am wrong.
    Thanks in advance.
    DSC.

    Hi,
    It is correvt that the new barcode technology is only supported via smartforms, see SAP Note #645158.
    With sapscript, your printer must have barocde fonts installed.(see SAP note 45643)
    Another solution is to print via a Windows system with a windows device type like SAPWIN or SWINCF and a barcode.dll.(see SAP note #14561)
    Regards,
    Aidan

  • Logo Visible in Print Preview, but not in pdf and hard copy

    Hi,
    We have uploaded a logo to be shown in the footer. We are able to see the logo in the print preview, but when we print the invoice (SAP Script),  it is not seen in the hard copy. We tried by saving it as a pdf, even in the pdf, it is not displayed.
    We are on SAP 4.7
    Please help.
    Thanks in advance.
    Mick

    hi,
    Am not sure what the exact issue could be, but i am expecting there may not be sufficient space to fit the logo. I suggest you to check the output by placing the logo in header whether its coming or not in hardcopy, that may help you.
    regards
    harris

  • Charactersvisible in preview but not printed from Reader

    Hi,
    System: Mini Mac, Canon MX870, Adobe Reader 11 (up to date)
    When downloading pdf from our uni web site (exam candidate lists etc) the document prints faithfully from OS Preview but printing directly from Reader causes character loss (such letters as y, and others). I know the work round with print as image, and Preview works as well, but just wondered what I have to tweak in Reader to get documents to print  (AR is up to date).
    Many thanks
    Mevado

    Hi,
    Sorry, would like me to send a link? Or is this some arcane function I should try? Sorry to be faecitious, unfortunately the file is covered by German confidentiality laws, as it is a list harvested from our internal internet site with names of candidtaes for an exam. I can try to modify it a little to remove potentially sensitive information. We have very strcit laws on privacy and personal data in Germany, at least as far as public institutions are concerned.

  • Getting values in preview but not on paper

    hi gurus,
                 the variables on a window is showing values in preview but not on paper the window is above a top-left  portion of other window..
    i need to display those variables on paper at print time...as alignment is perfect ..suggest me how to do?
    thnx in advance!!

    DEAR SEE THE POSITIONING OF WINDOWS,
    FOR THE BOTH WINDOWS WHICH ARE COLLIDING,
    GO TO OUTPUT OPTIONS AND MAKE UPPERMARGIN AND HEIGHT IN SUCH A MANNER THAT THEY NO LONGER COLLIDE.
    SEE THE OUTPUT.
    I THINK THEY ARE COMING NOW.
    REWARD IF USEFUL.
    aMIT sINGLA

  • Printer just started feeding a blank page after some, but not all printed documents

    Printer just started feeding a blank page after some, but not all printed documents

    Hi @cam21 ,
    I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    What application are you printing from?
    It may be a setting in the application.
    Does this happen from all applications?
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
    How is the printer connected? (USB/Ethernet/Wireless)
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If there is anything else I can help you with, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How can I buy an IOS app available in UK but not in Australia

    How can I buy an IOS app available in UK but not in Australia.
    The App is  " Weber'c on the Grill"

    That will not work.
    Please test your advice before posting it.

  • Artwork doesn't print when printing cd insert, it shows on the preview but doesn't print?

    Hi, after downloading the latest version of Itunes, the artwork no longer prints on the cd insert? It shows on the preview, but doesn't print on the insert? It worked fine before and the printer is working fine, it prints color photos and artwork, no problem?

    Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
    iCloud: Locate your device

  • Flash work in preview but not in the browser!?

    Hi there:)
    I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
    Thanks!
    V

    Hi John!
    Yes, sorry about that.. here it is.
    http://farmingtonfarm.com/appraisal.html
    Thanks for your help!!
    v
    Date: Thu, 8 Apr 2010 18:52:05 -0600
    From: [email protected]
    To: [email protected]
    Subject: flash work in preview but not in the browser!?
    Can't really help without a link to the site. Can you provide one?
    >

  • Button hyperlinks work in project preview but not in published .swf

    Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
    Any ideas?
    Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
    Using Captivate 6 on WIndows 7

    Hello,
    Welcome to Adobe Forums.
    Once your project published, add the .swf file in Flash Global Setting :
    1) Right Click on the content (Published .swf file) and click on Global Settings
    2) Go to Advanced Tab and Click on Trusted Location Settings  (Scrool down to see this button)
    3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
    4) Launch the .htm file again (Location where Captivate publish your project)
    Hope this helps !!
    Thanks,
    Vikram

Maybe you are looking for