Barcode printing using dot matrix printer

Hi,
Can anyone let me know what all DOT Matrix printers support barcode printing (PDF 147 type), The barcode is printed in invoice when printout is taken using laser jet but when using dot matrix (Panasonic kx-p3696), the invoice gets printed without barcode.
Thanks in advance.
Sachin

closing thread

Similar Messages

Printing using dot matrix printer,problem with landscape printing

Hi all,
We are planning to use Dot matrix printers for printing through SAP.We do front end printing using Windows OS. I am able to get prints properly if it is a script form. In case of list outputs, printer is printing the text outside the paper.Only half of the text is printing on the continuous stationary. Actually document is to be printed in Landscape format. So printer should print data vertically on the paper,but it's printing horizontally. I have created sparate output device for this printer.My printer is TVS Electronics HD745 24 Pin heavy duty printer. I have assigned OKI341 as device type for this device.Any more settings I need to do to get printing in landscape mode?

closing thread

Check printing using dot matrix printing?

HI all,
I have developed check printing using smartform for laser printer now the my client requirment has changed they are now using a dot matrix printer for check printing, so what parameter should i consider for developing a check printing for dot matrix printing

the same smartform and driver program will work for all kind of printer.

Right side Text not printing in Dot Matrix Print

Hi Gurus,
When i take print of the smartform with Laser Jet Printer its comming fine , but when i print using Dot Matrix Printer the text at right side is not printing.
Printer model : Epson DFX-5000+
Can any one tell me how to resolve this..
Thanks
Ganesh

hi ,
SAPWIN Drivers which support those Epson printers check in SAP (windows support )
These will solve your Problem .
Regards
Deepak.

Problem in Smartform Table/window Line Using Dot Matrix Printer

Dear Experts,
I faced issue in printing smartform using dot matrix printer. In the print result, the table line (horizontal and vertical) is not printed. I already search the forum but none can solve my issue. I already changed the table line width into 30 or 40 TW but still not work. Everything is OK in the print result, except the table line.
If i manually print/write '__' (underscore), it appear in the print result, but to write horizontal line and vertical line manually in the smartform will be huge effort.
I used device type EPESCP9 for the output device.
Can you tell me what i need to do?
your help will be appreciated.
Thanks

Hi,
Check your device type.
http://forums.sdn.sap.com/thread.jspa?threadID=2016838
Jshree

Printing form using dot matrix printer

Dear experts,
I have a PO form and when printed using laser printer it works just fine, when use dot matrix printer with continuos form , the form's content started to be printed a bit lower compared to the laser printer, should i adjust the paper size in the se71 ?

Hi Johannes,
We have been know to go directly into the printer defintion and adjust the Horizontal and Veritical Shift. This can be found on the Output Attributes in the Additional SAPScript and Smart Form Information area. We give our A4 printers a slight Negative Horizontal and Positive Vertical shift to better center the output on the different paper size.
Regards,
Raj

Draft / fast Printing on Dot Matrix Printer(s) from Windows

Dear all,
we need to print all documents in Draft / fast Printing on Dot Matrix Printer(s). how we can print quick draft mode. we are using SAP PL43. from where we can download draft 10cpi fonts.
Regds,
samapth

Draft mode is not by font. It is a specific printer mode. If you can not manually setup the mode, B1 may not have any abilities to print in this mode.
Thanks,
Gordon

Printing on Dot Matrix Printer

Hi
I am using JPS for printing, but to print on dot matrix printer, conventionally you print character at perticular row & col. Using Java Print Services how can I print a report to Dot Matrix Printer.
Thanks in Advance

Anybody knows I am also facing same Problem.
Thanx

Crystal reports printing in dot matrix printer

I'm using Crystal Reports 2008 with Visual Basic.Net 2008. The problem is that when i print the report in a laser printer, everything is good, but when i used dot matrix printer (like Epson LX 300+), reports is printed smaller than original, doesn't matter if i see good in preview. This is an Asp.Net web form.
How can i fix this problem

1) Make sure you have the latest CR Service Pack:
SP4 https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
SP4 MSI https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
SP4 MSM https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
2) Make sure you have the latest updates for the printer driver
3) Make sure the printer driver is Unicode compliant
4) Experiment with the "No Printer" option and Dissociate Formatting Page Size and Printer Paper Size option
5) Compare print from the CR designer to the app print. Do you see the same issue with both?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Printing in Dot Matrix Printer

Hi to all,
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
Aditya
Consultant Business solutions.

Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline
, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
   1. Run SAP Business One.
   2. Click the upper menu 'File' and select 'Page Setup'.
   3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
   4. Click OK to confirm your selection.
   5. On your desktop, click Start => Settings => Printers.
   6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
   7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
   8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
   1. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
After you do the stepwise, I am sure there will no problem any more. The slowly printing mostly caused by printer type and your hardware specifications for example your LAN, etc..
good luck...
Rgds,
null

Horizontal Vertical and logo is not printed in dot matrix printer

Hi All
i am printing a smartform in dot matrix printer
the form has horizontal vertical line
table lines , and logo
but when i print in Dot matrix printer
the line and logo is not display
Please say me how i design for it
wheather It is printer or smartform design problem?
Regard
Riten

Hi riten,
The Printer settings is not supporting the horizontal and vertical line ..check with the basis team for the printer settings.
Regards,
Sravanthi

Need to Take Fast Printing on Dot Matrix Printer Using Report 10g

Dear ,
I need to take a fast output of Oracle 10g reports on Dot Matrix printer
Client runs the report and open in PDF but when he takes hard copy on his/her local printer, then printer works very slow and take huge time to print a single page.
Kindly help me, how can client get the output directly on his locally attached Dot Matrix Printer and fast.
Reports desinged and compile in Report10g R2 and
Middle teir using =Application Server 10 R2.
Thanks and regards.
Priya

Draft mode is not by font. It is a specific printer mode. If you can not manually setup the mode, B1 may not have any abilities to print in this mode.
Thanks,
Gordon

Printing to dot matrix printer using continuous sheets

Hi;
Can anybody help me;
We have a web-based application.We have developed it with java and jsp. We want to print out several bills to continuous sheet.We are doing printing out with internet explorer and getting first page arranged but the following pages are sliding down.
Is there any way to print out to continuos sheet with dot matrix printer through java

You mean you want the browser to do that? Frankly I don't think you are likely to succeed, but possibly using CSS (with an "@media print" section) might work. Specify fonts, font sizes, try to control everything that can be controlled through CSS. Note that this has nothing to do with Java.

Print to Dot-Matrix-Printer

Hi,
My actual job is to create an Report in Oracle Reports 10, running on an IBM AIX Unix Server and direct the output to an Dot-Matrix Printer.
The Report is ready for Preview.
What Parameter should be set as Report_DesFormat for that Dot-Matrix Printer?
I found only the list HTML, HTMLCSS, PDF, RTF, POSTSCRIPT, XML but the Printer can not unterstand any of these formats.
Thanks for any help
Rolf Mamat

Hi.
Using one of graphical destination format can lead to unexpected results. What you should do is to configure your printer at the system OS level. Then you should include that printer into $ORACLE_HOME/guicommon/tk/admin/uiprint.txt file. The line you add to this file should be read as printer_name_you_specified_at_os_level:ASCII:1:some_comment:: For example :
my_dot_printer:ASCII:Testing printer::
Be aware of two colons at the end of the line.
For a destination format you should use one of predefined formats (dflt, wide, ...) or you can make your own format file which should be stored in $ORACLE_HOME/reports/printers directory. And dont forget to define your report design in character units.
Hope this answers your question.
Best regards.

Problem with countinuous paper printing in dot matrix printer

Hi All,
I have problem with dot matrix printer (Devise Type EPESCP) while printing continuos printing. If i am printing 2 or more than that prints at a time, 2nd page is printing 5 lines up.
I have developed one smartform for this and i have used A4 size page format.
I have tried to change the Printer initialization code to 86 lines for DINA4. Still no change in continuous printing.
     Printer initialization
     Reset after exit
     Cover page
     First Page
     Start of even page
     Start of odd page
     Start of page
     End of first page
     End of even page
     End of odd page
     End of page
     Start of line on an even page
     Start of line on an odd page
     Start of line
     End of line on an even page
     End of line on odd page
     End of line
Printer initialization
# reset
\e\0x40
# select character table 3 -> PC 437 character set
\e\0x74\0x03
# set line spacing 6 LPI
\e\0x32
# set page length 86 lines
\e\0x43\0x46
# cancel bottom margin
\e\0x4F
# set left margin to 0
\e\0x6C\0x00
# select LQ quality
\e\0x78\0x01
# select non-proportional spacing
\e\0x70\0x00
Can any one help me.
Thanks,
Vishnu

Hi Vishnu,
Above you have the following commands:
set line spacing 6 LPI
\e\0x32
set page length 86 lines
\e\0x43\0x46
46 HEX = 70
So the above settings mean 70 lines at 6 LPI = 11.66 inches.
So is the paper length 11.66 inches? If not, you should adjust the settings accordingly.
Regards,
Aidan

Barcode printing using dot matrix printer

Similar Messages

Maybe you are looking for