Barcode requirement
Dear all,
How can i maintain bar code for import as well as domestic purchase through SAP MM STO/GR/Sales price.
I want to maintain 1) Identification of material 2)Determination of selling price 3)Goods receipt date for tracking for waranty period.
regards,
Nitin Patil.
hi
check following
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/frameset.htm
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
if u need printing process then let meknow
regards
kunal
Similar Messages
-
Is it possible to import data values to be used in barcode creation?
I have a list of UPCs in an xml file, and would like to import the data to be converted into barcodes by Designer. Is this possible? Could anyone lead me to documentation? Thanks.
AlYou can import data from an XML file by creating a new data connection and you'll need to use the Paper Forms barcode. Be aware that use of the paper forms barcode requires LiveCycle Barcoded Forms (separate license required, according to the pop up when I place the field in a form). Once you set the data connection it's just a matter of writing a script to sift through the XML values one at a time to get the barcode.
-
HP OJ Pro 8500A not printing barcodes on boarding passes accurately
Recently upgraded to this model. I travel weekly and have never had this problem. Have tried adjusting settings to 'best'quality with no luck. The rest of the print quality is perfect but the barcodes required for scanning have some grey bars / sections in them. Very frustrating as this is such a simple print task.
Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Backup job state pending resource availability Deferred because a required device is not available
Hi
I had OSB 10.4.0.1.0
my backup job were running successfully for more than 3 months
last week I started getting : backup job state: pending resource availability
deferred because a required device is not available
Job created.
Dispatching job to run on administrative server.
Drive or volume on which mount attempted is unusable.
My obtool -ldev -g is :
tape01-lib:
Device type: library
Model: [none]
Serial number: [none]
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: 252d62dc-d8ec-102b-bceb-001d092aeca1
Attachment 1:
Host: server1
Raw device: /dev/sg3
Connection type: [unknown]
Inquiry data:
Vendor: IBM
Product: 3573-TL
Firmware: C.30
Serial number: 00X2U78G7865_LL0
opening handler: device is busy
tape01-tape:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Library: tape01-lib
DTE: 1
Automount: yes
Error rate: [disabled]
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: 4
Use list: 1-20
Drive usage: 7 months, 3 weeks
Cleaning required: yes
UUID: 2dfadcfa-d8ec-102b-bceb-001d092aeca1
Attachment 1:
Host: server1
Raw device: /dev/sg2
Connection type: [unknown]
Inquiry data:
Vendor: IBM
Product: ULT3580-TD4
Firmware: C7QH
Serial number: 1310113272
Hardware compression: not available
Hardware encryption: not available
please I need help
ThanksWhat does an lsvol on the library show? What about an lsj -l on the job ? We need to be able to see what tapes are available and what the job is looking for .
Thanks
Rich. -
Drive not found in library database
Greetings.
I'm new to OSB and am having tape drive, volume problems.
File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
Please advise.
Transcript:
2014/04/23.11:44:01 ______________________________________________________________________
2014/04/23.11:44:01
2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:44:01
2014/04/23.11:44:01 ---
2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.11:44:01 drive not found in library database (library manager)
2014/04/23.11:45:01 ______________________________________________________________________
2014/04/23.11:45:01
2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:45:01
2014/04/23.11:45:01 ---
2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.11:45:01 drive not found in library database (library manager)
2014/04/23.11:46:01 ______________________________________________________________________
2014/04/23.11:46:01
2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:46:01
2014/04/23.11:46:01 ---
2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.11:46:01 drive not found in library database (library manager)
2014/04/23.11:48:01 ______________________________________________________________________
2014/04/23.11:48:01
2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:48:01
2014/04/23.11:48:01 ---
2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.11:48:01 drive not found in library database (library manager)
2014/04/23.11:49:01 ______________________________________________________________________
2014/04/23.11:49:01
2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:49:01
2014/04/23.11:49:01 ---
2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.11:49:01 drive not found in library database (library manager)
2014/04/23.11:50:01 ______________________________________________________________________
2014/04/23.11:50:01
2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:50:01
2014/04/23.11:50:01 ---
2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
2014/04/23.11:50:01 drive not found in library database (library manager)
2014/04/23.12:00:01 ______________________________________________________________________
2014/04/23.12:00:01
2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:00:01
2014/04/23.12:00:01 ---
2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.12:00:01 drive not found in library database (library manager)
2014/04/23.12:01:01 ______________________________________________________________________
2014/04/23.12:01:01
2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:01
2014/04/23.12:01:01 ---
2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.12:01:01 drive not found in library database (library manager)
2014/04/23.12:01:24 ______________________________________________________________________
2014/04/23.12:01:24
2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:24
2014/04/23.12:01:25 ---
2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.12:01:25 drive not found in library database (library manager)
2014/04/23.12:04:01 ______________________________________________________________________
2014/04/23.12:04:01
2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:04:01
2014/04/23.12:04:01 ---
2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.12:04:01 drive not found in library database (library manager)
2014/04/23.12:05:01 ______________________________________________________________________
2014/04/23.12:05:01
2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:01
2014/04/23.12:05:01 ---
2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.12:05:01 drive not found in library database (library manager)
2014/04/23.12:05:21 ______________________________________________________________________
2014/04/23.12:05:21
2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:21
Backup started on Wed Apr 23 2014 at 12:05:51
Volume label:
Volume tag: LEV018
Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Volume ID: mf_2min-000025
Volume sequence: 1
Volume set owner: root
Volume set created: Wed Apr 23 12:05:51 2014
Volume set expires: Wed Apr 23 12:07:51 2014
Media family: mf_2min
Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Archive label:
File number: 1
File section: 1
Owner: root
Client host: x4440a
Backup level: 0
S/w compression: no
Archive created: Wed Apr 23 12:05:51 2014
Encryption: off
Dumping all files in /etc
Backup complete on Wed Apr 23 2014 at 12:06:03
Backup statistics:
status 0
devices IBM4_0_0_1_1
devices 1
volumes mf_2min-000025
voltags LEV018
file 1
host x4440a
encryption off
start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
entries_scanned 3373
kbytes_scanned 40556
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 2047
directories 315
hardlinks 0
symlinks 1011
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 39264
dev_kbytes 35977
dev_iosecs 2
dev_iorate 18.4 MB/S
wrt_iosecs 15
wrt_iorate 2.5 MB/S
physical_blks_written 1102
write_errors 0
physical_blks_read 2
read_errors 0
error_rate 0%
path /etc completed, status 0
[root@x4440a backup]# obtool lsdev -lvg
SL500:
Device type: library (ACSLS)
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: e0b58224-a1a4-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
ACSLS server: v215f
ACSLS port: 0
ACS id: 0
ACSLS access id: acsss
Reservation 1:
Component: obacslibd
Host: x4440a
Process: 32195
Element counts / addresses:
10 mte: 1 - 10
281 se : 1 - 281
1 iee: 1
1 dte: 1
Moves:
From mte, to: mte 0 se 0 iee 0 dte 0
From se, to: mte 0 se 0 iee 1 dte 1
From iee, to: mte 0 se 0 iee 0 dte 0
From dte, to: mte 0 se 1 iee 0 dte 0
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
State of barcode reader: enabled
IBM4_0_0_1_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: 14 minutes, 58 seconds
UUID: 179eb954-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg18
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD4
Firmware: C7Q0
Serial number: 1310127325
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_2_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 7498ff66-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg16
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1168002114
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP6_0_0_3_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 3
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: cd20d3fc-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg21
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 6-SCSI
Firmware: J39S
Serial number: HU1233PPNN
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_1_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 5b6cf420-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg15
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1068002447
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP4_0_0_2_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 8bd3659a-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg13
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 4-SCSI
Firmware: H64S
Serial number: HU1803168E
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_3:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 3
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 9ee7dbd4-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg23
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NFE
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_4:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 4
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: b45b889e-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg24
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NBF
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
[root@x4440a backup]#
[root@x4440a backup]# obtool lsvol -L SL500 -l
Inventory of library SL500:
in 1: barcode F50216, oid 100
in 2: barcode I50116, oid 101
in 3: barcode LEV008, oid 102, mediainfo hw encryptable
in 4: barcode LEV010, oid 103, mediainfo hw encryptable
in 5: barcode LEV017, oid 104, mediainfo hw encryptable
in 6: volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
in 7: barcode LEV049, oid 106
in 8: barcode LEV058, oid 107
in 9: barcode PQ4196, oid 108
in 10: barcode PQ4883, oid 109
in 11: barcode S50282, oid 110
in 12: barcode S50290, oid 111
in 13: barcode S50291, oid 112
in 14: barcode S50292, oid 113
in 15: barcode S50300, oid 114
in 16: barcode S60111, oid 115
in 17: barcode S60113, oid 116
in 18: barcode SF6410, oid 117
in 19: barcode SF6411, oid 118
in 20: barcode SF6412, oid 119
in 21: barcode SF6413, oid 120
in 22: barcode SF6414, oid 121
in 23: barcode SF6416, oid 122
in 24: barcode SF6417, oid 123
in 25: barcode SF6418, oid 124
in 26: barcode SF6419, oid 125
in 27: vacant
in 28: vacant
in 29: vacant
in 30: vacant
in 31: vacant
in 274: vacant
in 275: vacant
in 276: vacant
in 277: vacant
in 278: vacant
in 279: vacant
in 280: vacant
in 281: vacant
in iee: vacant
in dte: vacant
[root@x4440a backup]#Rich
Thanks for your response.
ACSLS is part of the configuration requirements I need to have in this OBS environment.
I'm going to re install OBS just to see if anything changes.
Thanks again.
Update:
When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
After the daemon was restarted I was able to use the attached tape drives. -
Oracle secure backup "lsbackup " not showing in obtool
hi!
i am using oracle secure backup with virtual tape drive....
lsdev -lvlib:
Device type: library (virtual)
Model: [none]
Serial number: 82206a7c
In service: yes
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Ejection type: auto
Min writable volumes: 0
UUID: d9916f34-cdec-102c-a9cf-000c2912137c
Attachment 1:
Host: osb
Raw device: /vlib
vt:
Device type: tape (virtual)
Model: [none]
Serial number: 96627110
In service: yes
Library: vlib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: 1 minute, 9 seconds
Cleaning required: no
UUID: f2efc426-cdec-102c-a9cf-000c2912137c
Attachment 1:
Host: osb
Raw device: /vt
its working fine i use rman and took two backups....but i dont know where are they....on os i have two directory vlib(library) and one more was created 'vt'(tape drive).i know backups are in vlib but how to check them..through obtool ...it shows nothing..
please help.......
BACKUP 1:
RMAN> run
2> {
3> allocate channel ch1 device type sbt;
4> backup datafile 4;
5> release channel ch1;
6> }
using target database control file instead of recovery catalog
allocated channel: ch1
channel ch1: sid=130 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00004 name=/u01/app/oracle/product/10.2.0/oradata/orcl/users01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0nl1h7ao_1_1 tag=TAG20091222T061656 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:25
Finished backup at 22-DEC-09
released channel: ch1
BACKUP 2 .......
RMAN> run
2> {
3> allocate channel ch1 device type 'SBT_TAPE';
4> backup datafile 3;
5> backup datafile 2;
6> release channel ch1;
7> }
allocated channel: ch1
channel ch1: sid=130 devtype=SBT_TAPE
channel ch1: Oracle Secure Backup
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00003 name=/u01/app/oracle/product/10.2.0/oradata/orcl/sysaux01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0ol1h7nq_1_1 tag=TAG20091222T062354 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:45
Finished backup at 22-DEC-09
Starting backup at 22-DEC-09
channel ch1: starting full datafile backupset
channel ch1: specifying datafile(s) in backupset
input datafile fno=00002 name=/u01/app/oracle/product/10.2.0/oradata/orcl/undotbs01.dbf
channel ch1: starting piece 1 at 22-DEC-09
channel ch1: finished piece 1 at 22-DEC-09
piece handle=0pl1h7p7_1_1 tag=TAG20091222T062439 comment=API Version 2.0,MMS Version 10.3.0.1
channel ch1: backup set complete, elapsed time: 00:00:25
Finished backup at 22-DEC-09
released channel: ch1
Edited by: Muhammad.Usman on Dec 22, 2009 8:51 PMThe configuration you have described is not supported. If you want to use a VTL you will need to purchase one from a supported VTL supplier.
OSB does not provide its own VTL.
Rich -
HI ALL,
whether the configuration for the BAR CODE is whether
has to do by the BASIC guys or the FUNC., guys
pls tell me . as my exploring its the part of the BASIC guy
i think.,
pls tell me which part func. guy has to take carte and which parts basic and abap guys take care
clearify me
vbakyaraj
Edited by: raj on Sep 18, 2008 7:20 AMHi,
Functional consultant will do the detailed study about the material movements in the plant. if the industry need the barcode requirement,
Functional consultant is the person who needs implement the barcoding process. he need to all the configuration and if there is any gap then he need to prepare a functional specification and ABAPPER will do the required developement.
Basis intervention is there to have the SAP GUI in barcode reader(GUN).
Regards,
Bala -
What happen no volume could be found
install osb on t4-2(solaris) and sl150
2013/09/04.12:23:51 ______________________________________________________________________
2013/09/04.12:23:51
2013/09/04.12:23:51 Transcript for job admin/1.1 running on t4-2
2013/09/04.12:23:51
2013/09/04.12:23:51 (amh) qdv__automount_in_mh entered
2013/09/04.12:23:51 (amh) qdv__automount_in_mh slt150-lto5 at 2013/09/04.12:23:51, flags 0x100
2013/09/04.12:23:51 (amh) mount volume options list contains:
2013/09/04.12:23:51 (amh) vtype 3 (app), vid (null), vs_create 0, family (null), retain (null), size 0, mediainfo 2, scratch 0
2013/09/04.12:23:51 (amh) don't preserve previous mh automount state
2013/09/04.12:23:52 (gep) getting reservation for element 0x1 (dte)
2013/09/04.12:23:52 (una) unload_anywhere entered
2013/09/04.12:23:52 (amh) beginning pass 1, mediainfo pass 1
2013/09/04.12:23:52 (gep) getting reservation for element 0x1 (se)
2013/09/04.12:23:52 (amh) 1 no vid
2013/09/04.12:23:52 (gep) getting reservation for element 0x2 (se)
2013/09/04.12:23:52 (amh) 2 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x3 (se)
2013/09/04.12:23:52 (amh) 3 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x4 (se)
2013/09/04.12:23:52 (amh) 4 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x5 (se)
2013/09/04.12:23:52 (amh) 5 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x6 (se)
2013/09/04.12:23:52 (amh) 6 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x7 (se)
2013/09/04.12:23:52 (amh) 7 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x8 (se)
2013/09/04.12:23:52 (amh) 8 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x9 (se)
2013/09/04.12:23:52 (amh) 9 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xa (se)
2013/09/04.12:23:52 (amh) 10 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xb (se)
2013/09/04.12:23:52 (amh) 11 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xc (se)
2013/09/04.12:23:52 (amh) 12 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xd (se)
2013/09/04.12:23:52 (amh) 13 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xe (se)
2013/09/04.12:23:52 (amh) 14 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xf (se)
2013/09/04.12:23:52 (amh) 15 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x10 (se)
2013/09/04.12:23:52 (amh) 16 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x11 (se)
2013/09/04.12:23:52 (amh) 17 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x12 (se)
2013/09/04.12:23:52 (amh) 18 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x13 (se)
2013/09/04.12:23:52 (amh) 19 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x14 (se)
2013/09/04.12:23:52 (amh) 20 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x15 (se)
2013/09/04.12:23:52 (amh) 21 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x16 (se)
2013/09/04.12:23:52 (amh) 22 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x17 (se)
2013/09/04.12:23:52 (amh) 23 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x18 (se)
2013/09/04.12:23:52 (amh) 24 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x19 (se)
2013/09/04.12:23:52 (amh) 25 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1a (se)
2013/09/04.12:23:52 (amh) 26 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1b (se)
2013/09/04.12:23:52 (amh) 27 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1c (se)
2013/09/04.12:23:52 (amh) 28 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1d (se)
2013/09/04.12:23:52 (amh) 29 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1e (se)
2013/09/04.12:23:52 (amh) 30 vacant
2013/09/04.12:23:52 (amh) end of pass 1 at 2013/09/04.12:23:52
2013/09/04.12:23:52 (amh) beginning pass 2, mediainfo pass 1
2013/09/04.12:23:52 (gep) getting reservation for element 0x1 (se)
2013/09/04.12:23:52 (amh) 1 oid 100 doesn't meet mount requirements - unlabeled
2013/09/04.12:23:52 (gep) getting reservation for element 0x2 (se)
2013/09/04.12:23:52 (amh) 2 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x3 (se)
2013/09/04.12:23:52 (amh) 3 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x4 (se)
2013/09/04.12:23:52 (amh) 4 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x5 (se)
2013/09/04.12:23:52 (amh) 5 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x6 (se)
2013/09/04.12:23:52 (amh) 6 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x7 (se)
2013/09/04.12:23:52 (amh) 7 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x8 (se)
2013/09/04.12:23:52 (amh) 8 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x9 (se)
2013/09/04.12:23:52 (amh) 9 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xa (se)
2013/09/04.12:23:52 (amh) 10 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xb (se)
2013/09/04.12:23:52 (amh) 11 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xc (se)
2013/09/04.12:23:52 (amh) 12 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xd (se)
2013/09/04.12:23:52 (amh) 13 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xe (se)
2013/09/04.12:23:52 (amh) 14 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0xf (se)
2013/09/04.12:23:52 (amh) 15 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x10 (se)
2013/09/04.12:23:52 (amh) 16 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x11 (se)
2013/09/04.12:23:52 (amh) 17 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x12 (se)
2013/09/04.12:23:52 (amh) 18 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x13 (se)
2013/09/04.12:23:52 (amh) 19 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x14 (se)
2013/09/04.12:23:52 (amh) 20 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x15 (se)
2013/09/04.12:23:52 (amh) 21 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x16 (se)
2013/09/04.12:23:52 (amh) 22 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x17 (se)
2013/09/04.12:23:52 (amh) 23 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x18 (se)
2013/09/04.12:23:52 (amh) 24 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x19 (se)
2013/09/04.12:23:52 (amh) 25 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1a (se)
2013/09/04.12:23:52 (amh) 26 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1b (se)
2013/09/04.12:23:52 (amh) 27 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1c (se)
2013/09/04.12:23:52 (amh) 28 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1d (se)
2013/09/04.12:23:52 (amh) 29 vacant
2013/09/04.12:23:52 (gep) getting reservation for element 0x1e (se)
2013/09/04.12:23:52 (amh) 30 vacant
2013/09/04.12:23:52 (amh) end of pass 2 at 2013/09/04.12:23:52
2013/09/04.12:23:52 (amh) beginning pass 3, mediainfo pass 1
2013/09/04.12:23:52 (gep) getting reservation for element 0x1 (se)
2013/09/04.12:23:52 (amh) 1 loading
2013/09/04.12:25:07 (atv) qdv__automount_this_vol entered
2013/09/04.12:25:08 (atv) state check failed - volume is write protected (OB device mgr)
2013/09/04.12:25:08 (atv) qdv__automount_this_vol exited
2013/09/04.12:25:08 (amh) 1 automount failed - volume is write protected (OB device mgr)
2013/09/04.12:25:08 (amh) 1 dropping this volume from uselist after unload
2013/09/04.12:25:08 (una) unload_anywhere entered
2013/09/04.12:26:08 (gep) getting reservation for element 0x2 (se)
2013/09/04.12:26:08 (amh) 2 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x3 (se)
2013/09/04.12:26:08 (amh) 3 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x4 (se)
2013/09/04.12:26:08 (amh) 4 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x5 (se)
2013/09/04.12:26:08 (amh) 5 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x6 (se)
2013/09/04.12:26:08 (amh) 6 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x7 (se)
2013/09/04.12:26:08 (amh) 7 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x8 (se)
2013/09/04.12:26:08 (amh) 8 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x9 (se)
2013/09/04.12:26:08 (amh) 9 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0xa (se)
2013/09/04.12:26:08 (amh) 10 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0xb (se)
2013/09/04.12:26:08 (amh) 11 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0xc (se)
2013/09/04.12:26:08 (amh) 12 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0xd (se)
2013/09/04.12:26:08 (amh) 13 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0xe (se)
2013/09/04.12:26:08 (amh) 14 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0xf (se)
2013/09/04.12:26:08 (amh) 15 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x10 (se)
2013/09/04.12:26:08 (amh) 16 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x11 (se)
2013/09/04.12:26:08 (amh) 17 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x12 (se)
2013/09/04.12:26:08 (amh) 18 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x13 (se)
2013/09/04.12:26:08 (amh) 19 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x14 (se)
2013/09/04.12:26:08 (amh) 20 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x15 (se)
2013/09/04.12:26:08 (amh) 21 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x16 (se)
2013/09/04.12:26:08 (amh) 22 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x17 (se)
2013/09/04.12:26:08 (amh) 23 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x18 (se)
2013/09/04.12:26:08 (amh) 24 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x19 (se)
2013/09/04.12:26:08 (amh) 25 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x1a (se)
2013/09/04.12:26:08 (amh) 26 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x1b (se)
2013/09/04.12:26:08 (amh) 27 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x1c (se)
2013/09/04.12:26:08 (amh) 28 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x1d (se)
2013/09/04.12:26:08 (amh) 29 vacant
2013/09/04.12:26:08 (gep) getting reservation for element 0x1e (se)
2013/09/04.12:26:08 (amh) 30 vacant
2013/09/04.12:26:08 (amh) end of pass 3 at 2013/09/04.12:26:08
2013/09/04.12:26:08 (amh) reporting no match in library
2013/09/04.12:26:08 (amh) end of automount at 2013/09/04.12:26:08 (0x20009624)
2013/09/04.12:26:08 (amh) returning from qdv__automount_in_mh
2013/09/04.12:26:08 ---
2013/09/04.12:26:08 No volume could be found in sl150-lib (for drive slt150-lto5) to use for job admin/1.1.
2013/09/04.12:26:08 A volume is needed to perform a backup.
obtool lsvol -L sl150-lib -l
Inventory of library sl150-lib:
in 1: barcode L30016, oid 100, mediainfo not hw encryptable
in 2: barcode DG 002, oid 101, mediainfo not hw encryptable
in 3: vacant
in 4: vacant
in 5: vacant
in 6: vacant
in 7: vacant
in 8: vacant
in 9: vacant
in 10: vacant
in 11: vacant
in 12: vacant
in 13: vacant
in 14: vacant
in 15: vacant
in 16: vacant
in 17: vacant
in 18: vacant
in 19: vacant
in 20: vacant
in 21: vacant
in 22: vacant
in 23: vacant
in 24: vacant
in 25: vacant
in 26: vacant
in 27: vacant
in 28: vacant
in 29: vacant
in 30: vacant
in iee1: vacant
in iee2: vacant
in iee3: vacant
in iee4: vacant
in dte: vacant
root@t4-2 # obtool lsdev -lvg
sl150-lib:
Device type: library
Model: [none]
Serial number: 464970G+1229SY0031
In service: yes
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Ejection type: auto
Min writable volumes: 0
UUID: 98284cc4-f6fc-1030-a847-9d3f4983392d
Attachment 1:
Host: t4-2
Raw device: /dev/obl0
Connection type: SCSI
Inquiry data:
Vendor: STK
Product: SL150
Firmware: 0182
Serial number: 464970G+1229SY0031
*** th0__warning: number of storage elements default (42) differs from current (30)
*** th0__warning: number of import export elements default (5) differs from current (4)
*** th0__warning: number of data transfer elements default (2) differs from current (1)
Element counts / addresses:
1 mte: 0
30 se : 1000 - 1029
4 iee: 10 - 13
1 dte: 500
Moves:
From mte, to: mte 0 se 0 iee 0 dte 0
From se, to: mte 0 se 1 iee 1 dte 1
From iee, to: mte 0 se 1 iee 1 dte 1
From dte, to: mte 0 se 1 iee 1 dte 1
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=1, unload_any=1, sense_dev_range=1
Device characteristics: two_d=0, is_120=0, fake_mte=1, fake_iee=0, one_target=0
State of barcode reader: present
Display: none
Dte 1: target * lun * name slt150-lto5 (raw device name /dev/obt0)
Warning: bus info unknown or drive not installed
slt150-lto5:
Device type: tape
Model: [none]
Serial number: HU1215N1TE
In service: yes
Library: sl150-lib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: 3-30
Drive usage: none
Cleaning required: no
UUID: 9ec1db04-f6fc-1030-a847-9d3f4983392d
Attachment 1:
Host: t4-2
Raw device: /dev/obt0
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: Y5BS
Serial number: HU1215N1TE
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152Is your inventory up to date on the library? Do an "obtool inventory -L sl150-lib" and then check your lsvol then try running the job again.
You should not have tapes write protected in the library. OSB manages if tapes are writeable/expired and so on, so that is not necessary if your setup is proper.
Thanks
Rich -
How to mount drive or library on OSB 10.2.0.3.0
how to mount drive or library on OSB 10.2.0.3.0. My Tape library is DELL TL-2000 with windows 2003 (but the windows identify it as IBM TotalStorage 3575 library and IBM ULT3580-TD3 drive).
The Library and drive are detected by windows and no red or yellow mark on the device manager.
I try to read the user guide but still cannot make them work.
And how to add OSB menu on EM? I already add osb_enabled=true on DRIVE:\oracle\product\10.2.0\db_1\<instance name>\sysman\config\emom.properties but the OSB menu does not appear.
here is some test that i do
ob> lsdev -lvg
TL-2000:
Device type: library
Model: //./obl0
Serial number: 00X2U78B5752_LL0
In service: yes
World Wide Name: TL-2000
Debug mode: no
Barcode reader: no
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: 70ba329b-f55a-463b-b269-a40941327e6c
Attachment 1:
Host: EIS-DATA
Raw device: //./obl0
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: 3573-TL
Firmware: 0.80
Serial number: 00X2U78B5752_LL0
Element counts / addresses:
1 mte: 1
23 se : 4096 - 4118
1 iee: 16
1 dte: 256
Moves:
From mte, to: mte 0 se 1 iee 1 dte 1
From se, to: mte 0 se 1 iee 1 dte 1
From iee, to: mte 0 se 1 iee 0 dte 1
From dte, to: mte 0 se 1 iee 1 dte 0
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=1, unload_any=1, sense_dev_
range=1
Device characteristics: two_d=0, is_120=0, fake_mte=1, fake_iee=0, one_targe
t=0
State of barcode reader: present
Display: none
Dte 1: target 4 lun * no drive configured in dte
Warning: bus info unknown or drive not installed
ULT3580:
Device type: tape
Model: IDM
Serial number: [none]
In service: yes
World Wide Name: IDM
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
UUID: 8df27857-7920-4e3c-9476-38799f1bb7d3
Attachment 1:
Host: EIS-DATA
Raw device: //./obt0
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULT3580-TD3
Firmware: 6BA1
Serial number: 1210245771
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Maximum block size: 262144
ob> catxcr -fl0 1.1
2008/11/03.09:33:26 ____________________________________________________________
2008/11/03.09:33:26
2008/11/03.09:33:26 Transcript for job 1.1 running on EIS-DATA
2008/11/03.09:33:26
2008/11/03.09:33:27 (atv) wait_ready failed - device offline (OB scsi device dr
iver)
2008/11/03.09:33:27 ---
2008/11/03.09:33:27 The volume in ULT3580 is not usable for job 1.1.
2008/11/03.09:33:27 The problem using ULT3580 and the volume it contains, if any, is
2008/11/03.09:33:27 device offline (OB scsi device driver)
ob> pingdev TL-2000
Info: library TL-2000 accessible.
ob> pingdev ULT3580
Info: drive ULT3580 accessible.
TIAWe need to increase the debug to see more output. Set the operations/backupoptions to -JJJJv and then re-run the backup and paste the transcript from that. Hopefully that will show more of the problem.
-
Hi
I have a HP MSL2024 library with two tape drives. When I submit two jobs in the OSB home page I see that backups run concurrently:
library MSL2024 in use by obrobotd on rubxyz, process 21569
drive (1) dte1 in use by obrobotd on rubxyz, process 21569
drive (2) dte2 in use by obrobotd on rubxyz, process 21569
but when I login to HP storage msl2024 tape library webpages I see on the system status that always one of the drives is writing. Never both. For example. For a few seconds drive 1 has status writing, the second drive status is idle, for the next few seconds both drives are idle and for the next few seconds first drive is idle and the second is writing. So backups don't run concurrently but in turn and very slow.
What could be the reason of such behavior?? Is a problem with configuration of the OSB or the HP tape library or somthing else??
thanks for help
JanStill the same problem
MSL2024:
Device type: library
Model: [none]
Serial number: [none]
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: no
Auto clean: no
Clean interval: (not set)
Clean using emptiest: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: b1cad8e6-af07-102b-b80f-001438b8cffc
Attachment 1:
Host: rubryk-pl
Raw device: /dev/sg1
Connection type: [unknown]
Reservation 1:
Component: obrobotd
Host: rubryk-pl
Process: 25450
Inquiry data:
Vendor: HP
Product: MSL G3 Series
Firmware: 4.20
Serial number: DEC06220KE
Element counts / addresses:
1 mte: 0
23 se : 1001 - 1023
1 iee: 101
2 dte: 1 - 2
Moves:
From mte, to: mte 0 se 1 iee 1 dte 1
From se, to: mte 0 se 1 iee 1 dte 1
From iee, to: mte 0 se 1 iee 0 dte 1
From dte, to: mte 0 se 1 iee 1 dte 1
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=1, unload_any=1, sense_dev_range=1
Device characteristics: two_d=0, is_120=0, fake_mte=0, fake_iee=0, one_target=0
State of barcode reader: present
Display: none
Dte 1: target 4 lun * name dte1 (raw device name /dev/sg0)
warning: dte 1 may be misconfigured; (on bus 0) is at target 0, lun 5,
which doesn't match the information provided by the library.
Dte 2: target 5 lun * name dte2 (raw device name /dev/sg2)
warning: dte 2 may be misconfigured; (on bus 0) is at target 0, lun 5,
which doesn't match the information provided by the library.
Warning: bus info unknown or drive not installed
dte1:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Library: MSL2024
DTE: 1
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: 2
Use list: all
Drive usage: 4 hours, 41 minutes
Cleaning required: no
UUID: aa02df66-af0f-102b-b80f-001438b8cffc
Attachment 1:
Host: rubryk-pl
Raw device: /dev/sg0
Connection type: [unknown]
Reservation 1:
Component: obrobotd
Host: rubryk-pl
Process: 25450
Reservation 2:
Component: obtar
Host: rubryk-pl
Process: 25560
Reservation 3:
Component: observiced
Host: rubryk-pl
Process: 6374
Inquiry data:
Vendor: HP
Product: Ultrium 3-SCSI
Firmware: D22W
Serial number: HU10823PAR
Hardware compression: not available
dte2:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Library: MSL2024
DTE: 2
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: 4
Use list: all
Drive usage: 4 hours, 38 minutes
Cleaning required: no
UUID: e7e9ec0c-af0f-102b-b80f-001438b8cffc
Attachment 1:
Host: rubryk-pl
Raw device: /dev/sg2
Connection type: [unknown]
Reservation 1:
Component: obrobotd
Host: rubryk-pl
Process: 25450
Reservation 2:
Component: obtar
Host: rubryk-pl
Process: 25636
Reservation 3:
Component: observiced
Host: rubryk-pl
Process: 6374
Inquiry data:
Vendor: HP
Product: Ultrium 3-SCSI
Firmware: D22W
Serial number: HU10823P9R
Hardware compression: not available
sg_map -x -i
/dev/sg0 0 0 4 0 1 /dev/nst0 HP Ultrium 3-SCSI D22W
/dev/sg1 0 0 4 1 8 HP MSL G3 Series 4.20
/dev/sg2 0 0 5 0 1 /dev/nst1 HP Ultrium 3-SCSI D22W -
OSB error Pending resource availability
In Oracle Secure backup getting error Pending resource availability while starting the backup.
but restoration is working fine with the same tape..
Please help me ASAP.
Thanks & Regards,
Maruthi.G,
*** phone number removed by moderator - this is not an official support channel and personal contact details should not be included ***Hi.
When I try to start a backup schedule, the catxcr command show the message : "No volume could be found in lib1 (for drive tape1) to use for job admin/7.1."
I don´t know the reason, because I insert a volume.
Please help.
root@bgtd T4# lsvol -L SL150 -l
bash: lsvol: command not found
root@bgtd T4# obtool lsvol -L SL150 -l
Oracle Secure Backup 10.4.0.3.0
Warning: auto-login failed - login token has expired
login: admin
Password:
Inventory of library SL150:
in 1: volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
in 2: volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
in 3: volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
in 4: volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
in 5: vacant
in
dte:
vacant
ob> lsdev --long SL150
SL150:
Device type:
library
Model:
[none]
Serial number:
[none]
In service:
yes
Debug mode:
no
Barcode reader:
default (hardware-selected)
Barcodes required:
no
Auto clean:
no
Clean interval:
(not set)
Clean using emptiest: no
Ejection type:
auto
Min writable volumes: 0
UUID:
3d467542-9944-1032-9254-c8c374159d95
Attachment 1:
Host:
bgtd
Raw device:
/dev/scsi/changer/c4t500104F000D7B072d1
tape1:
Device type:
tape
Model:
[none]
Serial number:
[none]
In service:
yes
Library:
SL150
DTE:
1
Automount:
yes
Error rate:
8
Query frequency:
[undetermined]
Debug mode:
no
Blocking factor:
(default)
Max blocking factor:
(default)
Current tape:
[unknown]
Use list:
all
Drive usage:
23 seconds
Cleaning required:
no
UUID:
71373288-9944-1032-9254-c8c374159d95
Attachment 1:
Host:
bgtd
Raw device:
/dev/scsi/sequential/c4t500104F000D7B072d0
ob> -
When I create the library and ping it,webtool display the erro.
Error: library stk-l180 is in use by obrobotd on host grandrole, process 6900
Library:Sepaton Vtl Library.Virtual:stk l180.driver:lto2
Following it's properties:
Warning: no hardware info is available for library stk-l180 - resource in use
Device Properties
Warning no hardware info is available for library stk-l180 - resource in use
stk-l180
Device type library
Model [none]
Serial number [none]
In service yes
Debug mode no
Barcode reader yes
Barcodes required no
Auto clean no
Clean interval (not set)
Clean using emptiest no
Unload required yes
UUID 656a5e48-5aba-1029-99d0-00115bcd72c8
Attachment 1
Host grandrole
Raw device /dev/obl0
Connection type [unknown]
[root@grandrole scsi]# more scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: STK Model: L180 Rev: R138
Type: Medium Changer ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 00 Lun: 01
Vendor: IBM Model: ULTRIUM-TD2 Rev: R138
Type: Sequential-Access ANSI SCSI revision: 03
Please describe each tape library by answering the following questions.
Oracle Secure Backup logical unit number [0]:
Host SCSI adapter number 0-15 [0]:
SCSI bus address [0]:
SCSI target ID [3]: 0
SCSI lun 0-7 [0]:
Please describe each tape drive by answering the following questions.
Oracle Secure Backup logical unit number [0]:
Host SCSI adapter number 0-15 [0]:
SCSI bus address [0]:
SCSI target ID [4]: 0
SCSI lun 0-7 [0]: 1Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613 -
The lsvol command shows that there is a tape mounted in drive1 When I issue unloadvol command to unload the tape, the command hangs.
2009/11/18.12:59:33 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:34 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:34 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:34 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:34 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:34 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:34 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:34 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:34 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:35 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:35 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:35 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:35 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:35 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:35 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:35 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:35 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:36 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:36 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:36 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:36 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:36 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:36 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:36 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:36 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:37 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:37 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:37 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:37 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:37 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:37 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:37 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:37 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:38 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:38 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:38 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:38 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:38 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:38 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:38 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:38 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:39 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:39 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:39 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:39 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:39 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:39 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:39 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:39 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:40 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:40 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:40 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:40 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:40 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:40 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:40 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:40 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:41 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:41 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:41 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:41 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:41 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:41 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:41 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:41 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:42 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:42 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:42 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:42 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:42 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:42 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:42 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:42 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:43 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:43 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:43 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:43 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:43 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:43 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:43 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:43 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:44 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:44 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:44 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:44 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:44 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:44 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:44 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:44 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:45 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:45 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:45 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:45 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:45 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:45 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:45 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:45 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:46 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:46 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:46 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:46 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:46 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:46 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:46 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:46 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:47 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:47 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:47 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:47 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:47 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:47 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:47 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:47 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:48 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:48 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:48 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:48 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:48 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:48 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:48 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:48 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:49 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:49 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:49 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:49 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:49 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:49 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:49 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:49 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:50 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:50 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:50 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:50 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:50 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:50 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:50 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:50 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:51 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:51 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:51 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:51 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:51 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:51 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:51 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:51 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:52 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:52 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:52 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:52 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:52 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:52 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:52 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:52 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:53 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:53 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:53 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:53 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:53 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:53 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:53 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:53 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:54 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:54 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:54 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:54 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:54 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:54 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:54 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:54 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:55 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:55 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:55 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:55 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:55 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:55 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:55 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:55 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:56 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:56 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:56 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:56 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:56 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:56 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:56 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:56 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:57 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:57 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:57 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:57 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:57 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:57 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:57 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:57 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:58 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:58 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:58 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:58 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:58 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:58 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:58 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:58 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.12:59:59 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.12:59:59 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.12:59:59 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.12:59:59 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.12:59:59 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.12:59:59 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.12:59:59 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.12:59:59 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
2009/11/18.13:00:00 ***1 wst__exec: op=8 (rewind), buf=0x0, count=0 (0x0), parm=0x0
2009/11/18.13:00:00 ioctl_op=0x3, to=1800, datalen=0x0, buf=0x0, cdb: 01 00 00 00 00 00 rewind
2009/11/18.13:00:00 ***1 wst__exec: op=2 (sense), buf=0x54e3a8, count=24 (0x18), parm=0x0
2009/11/18.13:00:00 ioctl_op=0x5, to=30, datalen=0x18, buf=0x54e3a8, cdb: 03 00 00 00 18 00 sense, cnt=24
2009/11/18.13:00:00 ***1 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
2009/11/18.13:00:00 ***1 wst__get_sense(int) cmd = 1, sense data:
2009/11/18.13:00:00 70 00 02 00 00 00 00 10 00 00 00 00 3A 04 00 00
00 00 00 00 00 00 00 00
ec=0, sk=not ready, asc=3A, ascq=4
error is: device is coming ready (OB scsi device driver)
flags: (none)
2009/11/18.13:00:00 ***1 wst__exec: rval=-1, status.code/resid/checks=0x2000811d/0x0/0x0
[root@prsabkp01m-ebsd lib0]#I matched the serial numbers of the tape drive from the control panel. They are correct.
ob> unloadvol -D tape1
Error: can't execute command - Interrupted system call
lib0:
Device type: library
Model: [none]
Serial number: USX615009K
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Auto clean: yes
Clean interval: 1 week
Clean using emptiest: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: b28c8fd2-b6bc-102c-816e-0014384cd52a
Attachment 1:
Host: prsabkp01m-ebsd
Raw device: /dev/sg0
Attachment 2:
Host: prsatdw01m-ebsd
Raw device: /dev/sg0
Attachment 3:
Host: prsatdw02m-ebsd
Raw device: /dev/sg0
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: MSL6000 Series
Firmware: 0520
Serial number: USX615009K
Element counts / addresses:
1 mte: 0
58 se : 32 - 89
2 iee: 448 - 449
2 dte: 480 - 481
Moves:
From mte, to: mte 0 se 0 iee 0 dte 0
From se, to: mte 0 se 1 iee 1 dte 1
From iee, to: mte 0 se 1 iee 1 dte 1
From dte, to: mte 0 se 1 iee 1 dte 1
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=1, unload_any=1, sense_dev_range=1
Device characteristics: two_d=0, is_120=0, fake_mte=0, fake_iee=0, one_target=0
State of barcode reader: present
Display: none
Dte 1: target 1 lun 0 name tape1 (raw device name /dev/sg1)
warning: dte 1 may be misconfigured; (on bus 0) is at target 0, lun 5,
which doesn't match the information provided by the library.
Dte 2: target 2 lun 0 name tape2 (raw device name /dev/sg2)
warning: dte 2 may be misconfigured; (on bus 0) is at target 0, lun 5,
which doesn't match the information provided by the library.
tape1:
Device type: tape
Model: [none]
Serial number: HU10609T4R
In service: yes
Library: lib0
DTE: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: 15
Use list: all
Drive usage: none
Cleaning required: no
UUID: cb9e8dea-b6bc-102c-816e-0014384cd52a
Attachment 1:
Host: prsabkp01m-ebsd
Raw device: /dev/sg1
Attachment 2:
Host: prsatdw01m-ebsd
Raw device: /dev/sg1
Attachment 3:
Host: prsatdw02m-ebsd
Raw device: /dev/sg1
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 3-SCSI
Firmware: G65W
Serial number: HU10609T4R
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
tape2:
Device type: tape
Model: [none]
Serial number: HU10609T6K
In service: yes
Library: lib0
DTE: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: none
Cleaning required: no
UUID: bba0568c-b6bf-102c-b0b9-0014384cd52a
Attachment 1:
Host: prsabkp01m-ebsd
Raw device: /dev/sg2
Attachment 2:
Host: prsatdw01m-ebsd
Raw device: /dev/sg2
Attachment 3:
Host: prsatdw02m-ebsd
Raw device: /dev/sg2
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 3-SCSI
Firmware: G65W
Serial number: HU10609T6K
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
Edited by: user12199230 on Nov 19, 2009 7:15 AM -
Hello to everybody!!!
I have a IBM TS3100 tape library with the OSB 10.2.0.2.
This library has 23 slots for tape midia. So I putty five midias lto 3 ( slot 1 to 5).
So when I trie to start a backup schedule the OSB web interface show the following messange : " No volume could be found in tc-lib (for drive tc-tape) to use for job 23."
I don´t know more what to do...
Please help me!!!Hello!!!
First, thanks the fast answer!
So, let´s go: - The SO is LInux Redhat ES 5.
FIRST -----------------------------------------------------------
- obtool catxcr -fl0 31.1
2008/07/03.08:39:53 ____________________________________________________________ __________
2008/07/03.08:39:53
2008/07/03.08:39:53 Transcript for job 31.1 running on netuno
2008/07/03.08:39:53
2008/07/03.08:39:53 (amh) qdv__automount_in_mh tc-tape at 2008/07/03.08:39:53, flags 0x100
2008/07/03.08:39:53 (amh) mount volume options list contains:
2008/07/03.08:39:53 (amh) vtype 3, vid (null), vs_create 0, family semanal, retain (null), size 0, scratch 0
2008/07/03.08:39:53 (amh) don't preserve previous mh automount state
2008/07/03.08:39:54 (amh) beginning pass 1
2008/07/03.08:39:54 (amh) 1 vacant
2008/07/03.08:39:54 (amh) 2 vacant
2008/07/03.08:39:54 (amh) 3 vacant
2008/07/03.08:39:54 (amh) 4 vacant
2008/07/03.08:39:54 (amh) 5 vacant
2008/07/03.08:39:54 (amh) 6 vacant
2008/07/03.08:39:54 (amh) 7 vacant
2008/07/03.08:39:54 (amh) 8 vacant
2008/07/03.08:39:54 (amh) 9 vacant
2008/07/03.08:39:54 (amh) 10 vacant
2008/07/03.08:39:54 (amh) 11 vacant
2008/07/03.08:39:54 (amh) 12 vacant
2008/07/03.08:39:54 (amh) 13 vacant
2008/07/03.08:39:54 (amh) 14 vacant
2008/07/03.08:39:54 (amh) 15 vacant
2008/07/03.08:39:54 (amh) 16 vacant
2008/07/03.08:39:54 (amh) 17 vacant
2008/07/03.08:39:54 (amh) 18 vacant
2008/07/03.08:39:54 (amh) 19 vacant
2008/07/03.08:39:54 (amh) 20 vacant
2008/07/03.08:39:54 (amh) 21 vacant
2008/07/03.08:39:54 (amh) 22 vacant
2008/07/03.08:39:54 (amh) 23 vacant
2008/07/03.08:39:54 (amh) end of pass 1 at 2008/07/03.08:39:54
2008/07/03.08:39:54 (amh) beginning pass 2
2008/07/03.08:39:54 (amh) 1 vacant
2008/07/03.08:39:54 (amh) 2 vacant
2008/07/03.08:39:54 (amh) 3 vacant
2008/07/03.08:39:54 (amh) 4 vacant
2008/07/03.08:39:54 (amh) 5 vacant
2008/07/03.08:39:54 (amh) 6 vacant
2008/07/03.08:39:54 (amh) 7 vacant
2008/07/03.08:39:54 (amh) 8 vacant
2008/07/03.08:39:54 (amh) 9 vacant
2008/07/03.08:39:54 (amh) 10 vacant
2008/07/03.08:39:54 (amh) 11 vacant
2008/07/03.08:39:54 (amh) 12 vacant
2008/07/03.08:39:54 (amh) 13 vacant
2008/07/03.08:39:54 (amh) 14 vacant
2008/07/03.08:39:54 (amh) 15 vacant
2008/07/03.08:39:54 (amh) 16 vacant
2008/07/03.08:39:54 (amh) 17 vacant
2008/07/03.08:39:54 (amh) 18 vacant
2008/07/03.08:39:54 (amh) 19 vacant
2008/07/03.08:39:54 (amh) 20 vacant
2008/07/03.08:39:54 (amh) 21 vacant
2008/07/03.08:39:54 (amh) 22 vacant
2008/07/03.08:39:54 (amh) 23 vacant
2008/07/03.08:39:54 (amh) end of pass 2 at 2008/07/03.08:39:54
2008/07/03.08:39:54 (amh) beginning pass 3
2008/07/03.08:39:54 (amh) 1 vacant
2008/07/03.08:39:54 (amh) 2 vacant
2008/07/03.08:39:54 (amh) 3 vacant
2008/07/03.08:39:54 (amh) 4 vacant
2008/07/03.08:39:54 (amh) 5 vacant
2008/07/03.08:39:54 (amh) 6 vacant
2008/07/03.08:39:54 (amh) 7 vacant
2008/07/03.08:39:54 (amh) 8 vacant
2008/07/03.08:39:54 (amh) 9 vacant
2008/07/03.08:39:54 (amh) 10 vacant
2008/07/03.08:39:54 (amh) 11 vacant
2008/07/03.08:39:54 (amh) 12 vacant
2008/07/03.08:39:54 (amh) 13 vacant
2008/07/03.08:39:54 (amh) 14 vacant
2008/07/03.08:39:54 (amh) 15 vacant
2008/07/03.08:39:54 (amh) 16 vacant
2008/07/03.08:39:54 (amh) 17 vacant
2008/07/03.08:39:54 (amh) 18 vacant
2008/07/03.08:39:54 (amh) 19 vacant
2008/07/03.08:39:54 (amh) 20 vacant
2008/07/03.08:39:54 (amh) 21 vacant
2008/07/03.08:39:54 (amh) 22 vacant
2008/07/03.08:39:54 (amh) 23 vacant
2008/07/03.08:39:54 (amh) end of pass 3 at 2008/07/03.08:39:54
2008/07/03.08:39:54 (amh) beginning pass 4
2008/07/03.08:39:54 (amh) 1 vacant
2008/07/03.08:39:54 (amh) 2 vacant
2008/07/03.08:39:54 (amh) 3 vacant
2008/07/03.08:39:54 (amh) 4 vacant
2008/07/03.08:39:54 (amh) 5 vacant
2008/07/03.08:39:54 (amh) 6 vacant
2008/07/03.08:39:54 (amh) 7 vacant
2008/07/03.08:39:54 (amh) 8 vacant
2008/07/03.08:39:54 (amh) 9 vacant
2008/07/03.08:39:54 (amh) 10 vacant
2008/07/03.08:39:54 (amh) 11 vacant
2008/07/03.08:39:54 (amh) 12 vacant
2008/07/03.08:39:54 (amh) 13 vacant
2008/07/03.08:39:54 (amh) 14 vacant
2008/07/03.08:39:54 (amh) 15 vacant
2008/07/03.08:39:54 (amh) 16 vacant
2008/07/03.08:39:54 (amh) 17 vacant
2008/07/03.08:39:54 (amh) 18 vacant
2008/07/03.08:39:54 (amh) 19 vacant
2008/07/03.08:39:54 (amh) 20 vacant
2008/07/03.08:39:54 (amh) 21 vacant
2008/07/03.08:39:54 (amh) 22 vacant
2008/07/03.08:39:54 (amh) 23 vacant
2008/07/03.08:39:54 (amh) end of pass 4 at 2008/07/03.08:39:54
2008/07/03.08:39:54 (amh) reporting no match in library
2008/07/03.08:39:54 (amh) end of automount at 2008/07/03.08:39:54 (0x20009624)
2008/07/03.08:39:54 ---
2008/07/03.08:39:54 No volume could be found in tc-lib (for drive tc-tape) to us e for job 31.1.
2008/07/03.08:39:54 A volume usable for media family semanal is needed to perfor m a backup.
obtool lsdev -lbvg
tc-lib:
Device type: library
Model: [none]
Serial number: [none]
In service: yes
Debug mode: no
Barcode reader: default (hardware-selected)
Barcodes required: no
Auto clean: yes
Clean interval: (not set)
Clean using emptiest: no
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: ef7546e4-25ce-102b-af39-00145ef8bb5a
Attachment 1:
Host: netuno
Raw device: /dev/obl1
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: 3573-TL
Firmware: 4.40
Serial number: 00L2U78D8948_LL0
Element counts / addresses:
1 mte: 1
23 se : 4096 - 4118
1 iee: 16
1 dte: 256
Moves:
From mte, to: mte 0 se 1 iee 1 dte 1
From se, to: mte 0 se 1 iee 1 dte 1
From iee, to: mte 0 se 1 iee 0 dte 1
From dte, to: mte 0 se 1 iee 1 dte 0
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=1, unload_any=1, sense_dev_ range=1
Device characteristics: two_d=0, is_120=0, fake_mte=1, fake_iee=0, one_targe t=0
State of barcode reader: present
Display: none
Dte 1: target 4 lun * name tc-tape (raw device name /dev/obt0)
Warning: bus info unknown or drive not installed
tc-tape:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Library: tc-lib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: 1 hour, 32 minutes
Cleaning required: no
UUID: 20af8fb2-25cf-102b-af39-00145ef8bb5a
Attachment 1:
Host: netuno
Raw device: /dev/obt0
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULT3580-TD3
Firmware: 73P5
Serial number: 1210333914
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Maximum block size: 524288
obtool lsvol -L tc-lib
Inventory of library tc-lib:
in 1: getting state: mechanical positioning error
in 2: getting state: mechanical positioning error
in 3: getting state: mechanical positioning error
in 4: getting state: mechanical positioning error
in 5: getting state: mechanical positioning error
in 6: getting state: mechanical positioning error
in 23: getting state: cleaning cartridge installed
Thanks the reply!!!!! -
Trying to setup drive and library
Hello everyone,
I am trying to get OSB running on a Dell server running RedHat 4. The drive we have connected is a Dell 124T. I have managed to get the linux tar command to succesfully read and write to the tape using /dev/st0. I followed the installation document to the letter (making the obvious changes in settings as needed). When I finally get to the point where using the obtool I can attempt to inventory the library I get the following error message:
unable to open qlm connection - device not found in external table
I have no idea what this means or how to fix it. Any help would be appreciated. ThanksThanks for the response. I have already reinstalled OSB twice and each time the devices several times. Here is the output of the lsdev -l command:
asp-lib:
Device type: library
Model: [none]
Serial number: [none]
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Auto clean: no
Clean interval: (not set)
Clean using emptiest: no
Unload required: yes
UUID: e67e879a-e38a-1028-aec5-000423a943c0
Attachment 1:
Host: mifune
Raw device: /dev/obl0
asp-tape:
Device type: tape
Model: [none]
Serial number: [none]
In service: yes
Library: asp-lib
DTE: 1
Automount: yes
Error rate: 8
Query frequency: [positioning unsupported]
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Use list: all
Drive usage: none
Cleaning required: [unknown]
UUID: 0af07c0a-e38b-1028-aec5-000423a943c0
Attachment 1:
Host: mifune
Raw device: /dev/obt0
And here is what I get in the web interface when I click the Show Properties button without selecting a device:
asp-lib
Device type library
Model [none]
Serial number [none]
In service yes
Debug mode no
Barcode reader yes
Barcodes required yes
Auto clean no
Clean interval (not set)
Clean using emptiest no
Unload required yes
UUID e67e879a-e38a-1028-aec5-000423a943c0
Attachment 1
Host mifune
Raw device /dev/obl0
Connection type SCSI
Inquiry data
Vendor DELL
Product PV-124T
Firmware 0031
Serial number CF5MC25109
opening handler device not found in external table
asp-tape
Device type tape
Model [none]
Serial number [none]
In service yes
Library asp-lib
DTE 1
Automount yes
Error rate 8
Query frequency 131072KB (134217728 bytes) (from driver)
Debug mode no
Blocking factor (default)
Max blocking factor (default)
Current tape [unknown]
Use list all
Drive usage none
Cleaning required [unknown]
UUID 0af07c0a-e38b-1028-aec5-000423a943c0
Attachment 1
Host mifune
Raw device /dev/obt0
Connection type SCSI
Inquiry data
Vendor CERTANCE
Product ULTRIUM 2
Firmware 1826
Serial number JK016G6
Tape state online, at BOT
Hardware compression on
Last read was uncompressed
Maximum block size 1048576
Remaining tape 213688320 (uncompressed) blocks (218.82GB)
Maybe you are looking for
-
How to use multiple search conditions in the where clause
Hi, Below is my query /****** Script for SelectTopNRows command from SSMS ******/ SELECT distinct ctacct,sum(GLMN02) FROM [ODS].[Staging].[tODS_INF_GLPCT] inner join [ODS].[Staging].[tODS_INF_GLPGL] ON tODS_INF_GLPCT.CTPAGE = tODS_INF_GLPGL.
-
Address book has same entries multiple times how can I go back to original cesium
Address book has same entries multiple times how can I go back to original cesium
-
Hi. I wonder if someone can help me? I used to have an android phone which i used for business. I have clients linked into dropbox files privately and these are ongoing works, needing updated frequently. Last week i changed to this Nokia lumia 625. I
-
Overflow in SAP Interactive Forms by Adobe - Scripting problem
Dear Colleagues, in SAP Interactive Forms by Adobe i have to avoid or do a page break. How can i get the overflow information to use this in a script written in java script or form calc? Can somebody help me. Kind Regards Christian Peters
-
Help please, Today I started shooting in Raw files as suggested by many professional photographers only to find out .. I have no way to open the photo... I own a copy of Adobe Photoshop cs5... and everywhere it tells me it has a plugin called camera