Barcode scanner and signature capture device for BB

If anyone is looking for a great barcode scanning and signature capture device for the BlackBerry, let me know.  The EnterMoCase is a ruggedized enclosure for the BB that incorporates barcode scanning and signature capture in a single-handed device.  It also has advanced power management features that allow the case to charge the BB when it gets below 40% of power. 

Can you contact me directly about this application? I would like to discuss our requirements and understand if they will match with system capabilities.
Michael Czopka
[email protected]
Synergex Logistics
+1.905.565.1212

Similar Messages

  • How can i use an barcode scanner and a keyboard at the same time on Ipad

    HI I am looking to find a way to use a barcode scanner and the on screen key bard at the same time, so far i cant seem to find a way to do it.
    Does any one know how this can be done.
    thanks

    It is possible, I use multiple versions, however Firefox official policy is that you use firefox3.6 or 5 ; not firefox 4 which is not secure and not supported.
    The easiest solution may be to use firefox portable http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 although firefox 3.6 will itself not be supported for much longer.

  • Epson scanner and image capture: blank white image

    I've been trying to make an epson perfection 1670 scanner work on an iMac running 10.6.4
    Since epson no longer specifically supports this model I am going to Image Capture and the epson drivers supplied by Apple. I have downloaded/installed the updated drivers twice (once via software update and once manually from apple support).
    I can get image capture to recognize the scanner and perform preview and full scans.
    The frustrating thing is that the image generated is completely blank; a white page. I have tried using the scanner and image capture on two other mac's (macBook pro, macBook) both running 10.6.4 and both of these produce the same white page (although they do recognize the scanner).
    I thought the scanner may have finally broken so i tested it on another (old) iMac G3 running os x 10.4.11 and epson's scanning utility; it worked fine and made a nice scan.
    I have tried to get epson's scanning utility to work under 10.6.4 by reinstalling it; I can get it to startup and run the scanner but it too produces a blank white image!
    I conclude there is some basic software incompatibility between the drivers and os x 10.6.4. Its odd that the drivers and image capture can run the scanner but cannot send an image to the computer.
    The epson driver in the latest apple update is version 5.2.5 (Copyright 2003 ???) while the latest driver on the epson site (for image capture) is 5.3. Tried to download the epson driver and got file not found (*!%#?&).
    done what I can; any suggestions?

    I had the same problem with my Epson 1260 scanner. The "updated" drivers provided by both Apple and Epson produced the exact same result - blank white pages, or if anything showed up at all, it would be all chopped up and skewed, like it had gone through a shredder. Trying to adjust the brightness and other slider settings made no difference.
    After wrestling with it for a week, I finally found a solution. First make sure Rosetta is installed. Use the old PowerPC Epson TWAIN driver from 2003; with the filename EPSON TWAIN 5.ds. Put it in the folder /Library/Image Capture/TWAIN Data Sources/.
    Then, don't use Image Capture. Download Graphic Converter. Set it to open in Rosetta mode. Then you can use Graphic Converter's File -> Acquire -> TWAIN Acquire... menu command to scan using the old EPSON TWAIN driver.

  • Scanner And Image Capture Problem

    Hello All,
    I thought I would start a new thread since my first one was answered.  The old thread is at:  https://discussions.apple.com/message/17757734#17757734
    Well, I went a couple weeks ok with the Scanner and Image Capture.  And then kaput, it doesn't work.  I thought about it some and it seemed to stop working after I did Software Update on March 17th, 2012.  In that update was a "Digital Camera Raw 3.1.0" update.  Which makes me very suspicious.
    Here is the error I get when I open Image Capture:
    So, it recognizes the scanner but can't do anything in Image Capture or the with the scanner buttons.
    I ran Software Update again, just to see if there was a new updated scanner driver but nothing came up.
    Any ideas?  I really want to avoid using the manufacturer's SW drivers etc.
    Thanks in advance for the help!

    PAHU,
    I feel like a complete idiot.  It was exactly the lock button.  The last time I finished using it, I locked it.  I totally forgot about it and I never thought of that being the problem to check.
    I really appreciate your help and thanks to you, I'm back and scanning!
    DMerz

  • Looking for RCA capture device for streaming

    My newspaper does some random video streaming of some events...however, we generally use a Windows PC Laptop (which is less powerful than the MacBook Pro I'm wanting to use, for several reasons such as convinience and well, the better performance).
    We have a RCA capture device that takes video and audio in from a basic Canon video camera and then feed that into Livestream.
    I know Blackmagic Design has a video capture device for Apple, but it's $149. Is there something cheaper out there for Macs? Our RCA capture device we use on Windows will not work on Mac.
    It just takes the RCAs and we plug it into the USB port. A firewire port would be fine too.

    I have read through some more forums and I only found one mention of the Media Manager 'Recomress' function.
    It said:
    "Transcoding with MM (recompress). It preserves timecode/reel name, file names, etc... Except the clip ID, which is used along with reel name and timecode to batch capture from source files (at least for P2)."
    Clip ID is the metadata relyable for the work of batch capture. It seems without it it is impossible to batch capture.
    I wonder why they designed Recompress like that, if it is true?

  • Capture Device for PE 4

    Hi everyone, I have Premiere Elements 4 and have currently been using Turtle Beach VideoAdvantage PCI to capture my videos, however, I am planning to upgrade to Windows 7 soon, and my capture device won't work on Win 7.  Can anyone here suggest a decent-quality capture device, that I could buy that would be compatible with Premiere Elements 4 & Windows 7?  I don't mind spending a bit more for quality, but I MUST HAVE s-video and RCA connections for capture as my current setup doesn't have firewire.  Please suggest only devices that will be Premiere elements friendly & Win 7 compatible.
    Thanks all
    ...bert

    Thank you for the clarification. Actually, after I re-read, and pondered some more, I went up to the studio to check out my Turtle Beach Advantage, and saw that it even added a FW connection, and I checked its specs. to see that it did have a controller chip, to take the stress off the MoBo's FW chips. Then, I thought of a third meaning - the one that you just verified.
    Now, back to your request: either the 110, or the 300 should work fine for you. I will be adding the 300, for those mentioned timebase corrections, etc. Though my Turtle Beach has done well, with few complaints, it will soon be legacy hardware, like my SyJet discs and drive...
    I'm sure that there are some good competitors, but I have yet to find them.
    Good luck,
    Hunt

  • Signature capture solution for HP Elitepad 900 G1

    Hi, Without the harness of docking station, is there a solution to integrate signature capture function for retail business with the stand-alone ElitePad 900 G1 ( compatible with Microsoft RMS 2.0)   Thanks very much for your help! Howard Chen 

    I think i've solved this problem. (Sorry for my English, but i'm Italian).
    The solution is very simple, i tried it more time and in my opinion, it work.
    We need only to disable "Fast Startup" options in Windows 8 / 8.1
    -WIN + X keys, then go to "Power Options"
    -"Choose what the power button do"  (click on it)
    -"Change settings that are currently unavaiable" (click)
    -In "Shoutdown settings" UNCHECK "Turn on fast startup (recommended)"
    Please tell me if it works also for you.

  • Hii all, I just bought an used iphone 5c from an user and only after a few weeks realised that it got activation locked. He might be unaware of that. Is it possible to get back to him and unlock the device for me as i have not contacts with him presently.

    Hii all, I just bought an used iphone 5c from an user and only after a few weeks realised that it got activation locked. He might be unaware of that. Is it possible to get back to him and unlock the device for me as i have not contacts with him presently.

    Well first you need to sync your iPhone 4 with your Mac/PC so that it will transfer all your music, apps, podcasts, etc. Then sync your iPod Touch and the media you selected during the sync should be there on your iPhone. If you have difficulty in transferring media from iPhone to your computer, try softwares like TransCopy. They will help in transferring data from your iphone to your computer. Dont forget to check that all the transferred data is in the iTunes media folder so that the iTunes can locate the files. Link to Transcopy software :
    http://www.copytrans.net/copytrans.php

  • I need a video capture device for downloading Band and family video tapes.

    Hi,  I need to download some old video tapes before they turn to dust.  Are there any fairly inexpensive video capture devices that work well with the Imac?
    Thanks

    Are they VHS video cassettes or something like 8MM camcorder tapes?
    If they're camcorder tapes, usually it's best to try to buy an old video camera (MUST have FIREWIRE port).
    Then you can play the tape in the camera and capture from the Firewire. Also important, if you have a 2010 (maybe 2009?) or newer iMac, you'll need a cable that is Firewire 400 to fit the camera at one end and Firewire 800 at the other end to connect to the iMac.

  • HDMI capture devices for IMac

    I noticed that blackmagic design are moving on to less expensive USB 3.0 in their HD video capture devices so I did a bit of lookin around to see weather the Imac or mac book pro could somehow be outfitted with usb 3.0 connections. It turns out that the mac book pro will work with a usb 3.0 card. Unfortunately though, black magic still does not doesn't show any signs of addressing support issues for apple and the usb 3.0 device compatibility issue. Does anyone know which way apple is leaning on the whole usb 3.0 thing. I'm pretty sure it offers exceptional increases in speed over even fw800. Or at least the potential for those increases as a matter of spec. And why not jump on the blueray-r while were at it.

    No, there is not. HDMI options on capture cards didn't arrive until after MacPros were released and G5s were discontinued. The only capture cards that work on G5's do not offer HDMI inputs. The Intensity series are PCIe only...AJA Kona line with HDMI are PCIe only....Matrox MXO2 line are PCIe and Express34 only. And your G5 has PCI-X slots.
    The AJA Kona 2, Kona LH, Decklink HD cards...things you can only find second hand...do not offer HDMI inputs. You are on a machine that was discontinued 4 years ago, HDMI support was not invented yet.
    Shane

  • Opinions on low cost USB video capture devices for FMLE?

    I have already tried a few such devices.  I would at least like to achieve reasonable SD at 720 X 480.  HD would be a plus, but not necessary.  My camera has HDMI, SDI, and Component and composit out.  I have already tried a couple of capture devices, and the results were as follows. 
    SIIG USB 2.0 Video Capture Device - JU-AV0012-S1
    Pretty clear as to why this was so cheap.  It claims full NTSC support, but that is only on the input.  Output is 320 X 240 only. 
    DIAMOND USB 2.0 HD Game Console Video Capture Device GC500 USB 2.0 Interface
    Again, this unit claims "HD" but that is only on the input.  Output is 640 x 480.  The image quality was terrible with the supplied software, or with Adobe FMLE.  Noisy, and well below full NTSC quality.  Even when fed with the component out of a Sony NX5.  Unacceptable.  Even for the bargain price at Frys. 
    Hauppauge HD PVR 2 Gaming Edition
    Seems I bought a dud.  I went back and forth with Hauppauge support, and never could get this to be detected by FMLE, or the included software.  On doing a search online for the error message I received, I discovered many similar trouble reports on various forums.  I bought this one at a discounted price.  Perhaps this is the reason why. 
    The notebook I have is a Windows unit, with no expresscard slot, or 1394 input (unfortunately).  I did look briefly at the Blackmagic Intesity Shuttle, but it needs USB 3.0.
    Curious to hear of any sucess with USB capture and FMLE, and with a device under (hopefully well under?)$200.

    I've been streaming with the ION Video2PC capture device...it works flawlessly with no problem. The machine I've been testing it on can only pump out 480p or 540p at the most. But, I'm sure if I used it on a faster machine I would get way better results. You can find them used under $30 bucks online and unlike most cheap capture/input devices, you can access the video and audio in FMLE. Just thought, I'd share they info.

  • Barcode Scanner and Calendar entries

    If you go to http://zxing.appspot.com/generator/ there is a QRCode barcode creator which works with the barcode scanner on various Nokia mobiles. However, there are a few type in there that don't seem to work with the E71 and N95. For instance the Calendar event and the SMS one. The scanner will read them in, but there doesn't seem to be any way of saving them in your calendar or sending the SMS. Does anyone know if there will be an update to the Barcode software to implement this as it would be very handy to use.
    Thanks

    Have a try of Nokias at http://mobilecodes.nokia.com/scan.htm
    N96-1 + 8G SD~Software Version 30.033~Software Version Date 18-06-09~Type RM-247~P/C 0543713~T Mobile UK

  • G555. Need drivers for SM Bus and another Unknown device for Windows XP.

    I try to install Windows XP on my G555. I got all other drivers, but cannot find drivers for SM Bus and an Unknown device. And what's this device?
    The second problem is that after I installed all the drivers, the card reader disappeared. It was there after I installed Windows XP, before I install drivers.
    Thanks a lot.
    A Simpleguy
    Solved!
    Go to Solution.

    Hi Simpleguy,
    Welcome to the forum!
    In thinkpads, it's usually intel chipset driver. For AMD based G555, I wouldn't be surprised if this is the driver you need:- http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_2476.html
    As for other unknown device, find it's PCI ID with any other known information and paste here.
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • TV Tuner or Video capture device for MBP

    I'm wondering if there is a device usb or expresscard34 that can allow me to watch cable TV or just a composite video input device that can be used with a cable box. I know there must be lots of devices for PPC Macs but which ones actually work on MBP and which one do you guys recommend? I'm looking for something below $150. Thanks in advance!
    MacBook Pro 1.83Ghz 1GB RAM   Mac OS X (10.4.6)  

    I have been using an Elgato eyeTV DTT on an Intel Mac mini and it has been working really well using version 2.1 of the eyeTV software.
    The eyeTV software comes with all Elgato eyeTV devices and works fine on Intel macs.
    I am very impressed with the Elgato devices and can recommend them.
    iFelix

  • Car Charger, Radio Transmitter and hands free device for IPHONE

    Is there a device that I can purchase that will allow me to charge my IPHONE, listen to music stored on my IPHONE thru the car radio and also all me to use the phone feature hands free? If so, where can I purchase it?

    I wish I had a product to point you to (and am still a little baffled that Apple didn't include voice activiation) but I think your best bet is to look at various audio systems, zero in on the best candidates, and make a check list of specific connectivity features you're looking for.
    There are many after market audio systems which have MP3 input capability or an iPod adapter that you can use to play tunes off of your iPhone. These units usually do not allow much iPod playlist navigation (i.e., you need to find what you want to listen to on your iPod/iPhone before you start driving).
    These after market systems also have Bluetooth hands-free integration. To an extent, they will work with any Bluetooth enabled phone, but the extent of how well they work is mixed bag unless the iPhone is specifically listed as one of the phones it supports. For example, with your iPhone paired to a third car audio unit, when your iPhone receives an incoming call, the music will fade down and you will hear your phone ringing through the car. You will then be able to answer the phone and hear the caller. Whether or not they will be able to hear you is anyone's guess with the audio unit's generic Bluetooth phone driver. With a third party audio unit which lists the iPhone as one of the phone it supports for hands-fee use, you will be able to speak to and hear an incoming caller. You may be able to program some of your most frequently dialed numbers into your audio system and dial out via your audio system, but you may not be able to upload all of your contacts; and even if you can, you need to make sure that you can dial those entries with speach recognition in your audio unit because it is not available in the iPhone.
    Check out JVC. I think they have an in-dash navigation unit that supports the iPhone. Again, you need to specifically find out from JVC the extend you can dial with speech recognition or with uploaded contacts.
    If anyone knows of any systems which are fully integrated (i.e, will upload contacts and provide speech recognition for dialing), please post it.

Maybe you are looking for