Barcode(Smartform)Printing through Intermec Printers

Hello All,
Is it possible to print Barcodes through Intermec Printers, I am using smartforms for the layout development.Pleaswe guide me with the procedure.
Thanks & Regards,
Vanita M.

In SE73 create a barcode of new technology. After this go to TA: smartstyles and create a characterformat with your created barcode inside. Then enter your smartform and add the style to it. Now if you create a textnode you can assign the character format "barcode" to your text or number. In preview and printout the barcode should be shown. In smartform you will only see the numbers or characters.

Similar Messages

  • Smartform printing on different printers

    Dear Experts,
    We have a PO form which is supposed to be printed on different printers across NA, Europe and Asia locations. The printer types are different with different device types too. While printing on these forms, the border in main window and footer is not visible in some of the printers. We have resolved this problem by doing adjustment in margin in SPAD. But users do not want this solution as this may require to change many printers in SPAD. They use these printers for other SAP document printing too, hence they are reluctant with this idea.
    Do we have any standard solution?

    Hi,
    Thanks for the information.
    But we have to change the device type for each printer. They are already using these old device types since long.
    Even with SAPWIN, we have to change vertical and horizontal shift in SPAD transaction.
    Do we have any other solution?
    Regards,
    Raja

  • Smartform Printing through Batch Job

    Hi
    Please help in the following issue :
    We have a report thourgh which say 10 pages needs to be printed.
    On eachpage we have page numbers like 1 of 10, 2 of 10 etc. and on the last page 10 of 10 will be printed.
    when the report is executed in foreground, the rints are perfect s expected. But when the same report is executed through Batch Job, the pages are being printed as 1 of &&, 2 of && etc, when it come to last page the print is 10 of 10.
    So, thr Batch job the last page of the print is OK, except all other pages, the issue is only printing this page nos.
    Please advise.
    Regards
    Shankar

    hi ,
    make sure that u declared that page no printing window as final window.try it.
    Regards,
    karthikeyan k s,

  • Printing through Wirless Network

    Dear All,
    i have the following problem ...
    we have printers on local network 192.168.100.XXX ....<-- DHCP is disables
    our Cisco Wirless LAN Controller is on different network 192.168.105.XXX .... <-- DHCP enabled
    the wirless device is connected to the local network switch 192.168.100.2 so its having the same gateway as the local network.
    How can I enable printing through wireless.
    awaiting your prompt feedback guys.

    i hope this is clear ...
    so can what configuration i have to enable any wirless user to print through local printers.
    Printer doesn't have wireless !!
    i am not trying to give you a hard time but i really need your help in this.

  • Using Intermec printers to print through LabVIEW

    Hi! I would like to call my Intermec label printer to print through LabVIEW over the serial connection (RS-232 port) but I have no idea on how to start. Anyone has any suggestions or examples that I can refer to ?
    Thanks!
    Regards,
    YuanGe

    Hi Smercurio,
    Thanks for the reply. I only have some example programs which were written using Visual Basic 6.0 as reference. I do have the Intermec Programming Language(IPL) Guide also.
    I had tried to do some callings to the printer using the commands from the IPL Guide, but it seems that the printer doesn't respond to anything at all. I am using the  basic_serial_write_and_read.vi to do some serial programming with the printer and LabVIEW but to no avail. Every command that I tried to input, the read control returns exactly what I had input, which probably shows that it is not working as I hope it is.
    I had used LabVIEW for my final year project during my university days, but it had nothing to do with serial connection/communication, so you can say I am a greenhorn in this area.
    Attached is the VI that I used to do the calling and the IPL Guide.
    Many thanks!
    Regards,
    YuanGe
    Attachments:
    basic_serial_write_and_read1.vi ‏31 KB
    IPL Intermec Printer Language 066396.pdf ‏1522 KB

  • Smartform - Printing differently on different printers

    Hi Guru's,
    I've a problem in printing the smartform to 2 different printers.
    1. LOCL - we don't have any problems in printing to the Local Printer.
    2.HP Printer (HIITPRT21) - when we print the document using this printer , Header is printing in one page and the Remaining contents (Main Window) is printing in different pages.
    I don't think there is a problem with the smartform, because it should print the same way on LOCL as HP Printer Does.
    Could you please let me know where the problem is and how to resolve it???
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=190743231
    The above blog is talking about the problems, it is mentioning about the problems with the print controls..how to know which one is causing the problems??
    Thanks,
    Adi.

    Moderator message -
    When closing old threads, there is no need to add a comment. Adding a pasted answer like "Resolved myself " only brings old threads to the top of the forum list and pushes current ones down. If you do add a comment, please indicate just how the problem was resolved.
    Note to potential responders to this post - I just rejected about 40 of your posts today. I didn't see that you had assigned a single point to any of the helpful answers or even a "thank you".
    Rob

  • BarTender for Zebra Barcode Label printing using Smartform

    HI Experts,
    Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
    I have to include a jpg Logo into the Label using BarTender.
    But when I test using the Zebra printer - the logo/picture won't print out.
    Any idea?
    Thank You.
    Best Regards,
    CW

    Hi There,
    I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software,  they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap.  See if they can help you. :~)
    Good luck.
    Dave.

  • Smartform printer issue LOCL/SAP PRINTER NAME

    Hi All,
    I have this smartform and driver program which i print through an output type from
    VF03.
    When i print with printer as LOCAL, it prints right.
    However when i use the same printer, this time specifiying the printer name
    the shadings and colors get distorted. The greys are printed as jet black.
    This is the same printer, only the way i reference it has changed.
    What must i do. Can i fix this without basis help?
    John

    Hi John,
    Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
    Color: Grey
    Saturation: 100%
    this can be the problem.
    I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
    The reason it works with LOCL and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
    If you wnat a gray background to a window, change the shading for window -> tab 'Output Options' to:
    Color: Black
    Saturation: 20%
    and this should resolve the problem.
    Then create a new spool and check if the problem is resolved. See SAP Note #400050.
    Regards,
    Aidan

  • Im on my schools wifi and I can usually print through wifi using my laptop. Can i do the same through iPad? Im not sure if its an air printer or not but everything is through wifi.

    I can usually print through the schools wifi using my laptop. Can i do the same using the iPad air? and if so how? Ive tried using the airprinter but it wouldnt load any printers. Usually I need to setup the printer through settings in my macbook. Can anyone help me how to do the same for my iPad?

    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • Print to different printers by page size

    Hi, i have a problem,  i need to print documents that have inside a lot of  different size pages(a4,A3,a1,A2,A0, a4x3 e.t.c.). Is it possible automaticly somehow to redirect a4,A3 pages to one printer and a1,A2,A0, a4x3 e.t.c. to other while printing whole file. I think this function will be useful in next acrobat version.
    something like this,dewading A3 to two A4 not needed
    to acrobat team:
    Did you thought about function that can make templates to printer like it made in AUTOCAD ? (*.pc3 files). It will be usefull when printer driver is not possible to save alot of page size formats. Autodesk fix this problem by making templates(like virtual printers) through that is possible to print, and in that is possible to save alot of page size formats that don't have original printer driver. It will be great if acrobat could use AUTOCAD *.pc3 templates to print through.

    Hi,
    Normally Outlook rules only print via the default printer, selecting the printers is beyond the control of Outlook build-in rules.
    If you have a rule written via a script, I suggest you post the question and the script to MSDN forum, in which you can get script specific support:
    http://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Melon Chen
    TechNet Community Support

  • Connecting printer through wireless Print Server

    Wireless Dlink DPR-1260, hooked up to network. ( using Linksys wireless router and Windows XP Home)
    Two usb printer ports. Loaded HP laserjet 2300 series using the print server software wizard.. works fine...prints remotely.
    The P.S. created the tcp/ip ports and loaded the drivers after requesting the HP driver disk.
    But, when loading the HP color laserJet 2550 series, it asks for the disk, but says the driver inf files not available. I downloaded from the HP web site the XP drivers, and when I pointed to the unzipped files, said the same thing.
    I used the XP driver... should I have used the Universal Print Driver?
    On the P.S. screen the HP 2300 shows up as HP LaserJet 2300 series, and the LPR Queque name is : LaserJet 2300
    But when I manually loaded the 2550, The name shows up as HP color LaserJet 2550 ser and the Queque name is color LaserJet 25.
    Both printers work fine connected directly to the printer, but the 2550 will not print through the P.S.
    Since the drivers for the 2550 are loaded and it prints when hard wired, tell me how to find the drivers installed on the computer, so I can point to them there.
    Thanks

    Printing with the built-in network protocols (Windows Printing, IP printing) requires a CUPS print driver. HP doesn't provide CUPS drivers (yet) - their drivers are written to only use USB. You can try the HP Photosmart P1100 Gimp-Print driver included in OS X.
    There is no CUPS driver for your specific model, that I can find.

  • HP Photosmart Plus e-All-in-One Printer B210e Does Not Print Through Wireless

    I am using Mac OS X 10.7.3 on a wireless connection. I went to print, HP Utility gave me the following error message:
    The printer may not exist or is unavailable at this time
    It was not being used by anything else at the time. Then 2-3 minutes after I got that first error message HP Utility gave me another error message:
    The printer is not responding
    Then on the printer touch screen display I touched the wireless icon, chose Run Wireless Network Test, and got an error message:
    Load paper into Main Tray.
    The tray had plain white paper (10-15 sheets) in a nice neat stack as far back as it would go. I took the stack just to be sure it was still in a neat stack and put it in as far as it would go and pressed OK on the touch screen display and I still got the same message. Then I decide to turn the printer off using the power button, waited about a minute, and then pressed the power button to turn it on. When I did I got another error message:
    Improper Shutdown
    To avoid damage, use On button to shut down. Do not unplug the power cord or turn off the power outlet to shut down the device.
    How is that an improper shutdown when I did use the power button to turn it off.  Why is it telling me that I need to use the power button to turn it off then back on when I did use the power button to do that.  What is the issue and how do I fix it.  I did not have this issue with Mac OS X 10.7.2, but I do now agter the 10.7.3 update.  As of right now the only way I can print from Mac OS X is using a USB connection.  I can print through a wireless connection using my Windows 7 partition on the same MacBook.  I am starting to think that this printer is not Mac OS X 10.7 Lion compatible.
    I have a Time Capsule (3rd Generation) with the current firmware for it and the current the current AirPort Utility for Mac OS X installed.

    SthrnDixieCowgirl wrote:
    I don't know how to remove and add printers unless I had to format my hard drive for a completely different reason and reinstalled the printer that way.
    To remove the printer, open System Preferences > Print & Scan. You will see the HP in the Printers list. Click on it once to select it and then press the minus button under the Printers list to remove it.
    With this done, click the plus button under the Printers list to add the printer. With the Add Printer window open and the Default view selected, the HP should appear in this view. Select it and the Print Using menu should change to the supporting printer driver. When this happens, click the Add button to complete the creation of the printer queue.
    SthrnDixieCowgirl wrote:
    I have heard other people have issues with 10.7.3 for other reasons and I should have waited until 10.7.4 came out before updating and I didn't and now there is nothing I can do to go back to 10.7.2
    You cannot believe everything you read. For every person that had a problem after installing the .3 update, a hundred more had no problem.
    But if you wanted to go back to 10.7.2, then you can use Time Machine to do this. If you are not using Time Machine then you need to start doing so. At least the update only stopped you from network printing. What if it had stopped you from using the Mac?

  • Finally able to print through Wireless Router!! (USR MaxG)

    So, after a full week of trying to get my printer to print wirelessly, I finally got it to work... but only after I had begun to write this post on the Apple Forums. So, since I felt like this post was extremely clear in the process, I'm posting it, in case anyone else has the same problem. I hope this helps someone, since it was impossible for me to find a post that really offered a clear explanation for how to print wirelessly...
    Here's my post:
    No matter what I do, I can't seem to print to my wireless router! Unless, that is, when I use my girlfriend's Windows computer. I'm able to print through the router to my printer via WinXP, but not OS X 1.4. Whenever I try to print in OS X, I get the error messages "Unable to find host..." or "Jobs Stopped."
    Here's my hardware:
    Router:
    U.S. Robotics Wireless MAXg Router (USR5461)
    Firmware: 3.93.35.0.6 (Jan 5 2006)
    Printer status: Ready
    Printer location: http://192.168.2.1:1631/printers/My_Printer
    Printer:
    Samsung ML-2510
    Computer:
    MacBook Pro
    OS X 10.4
    Here's what I've tried to do most recently:
    1) Applications> Utilities> Print Set Up Utility.
    2) Click "Add Printer" in Printer List
    3) Click "More Printers..." in print browser while holding down alt/option key
    4) Select "Advanced in Pull down menu
    5) Under Device, select Internet Printing Protocol using HTTP
    6) Under Device Name, insert "My_Printer" (listed above)
    7) Under Device URI, insert "http://192.168.2.1:1631/printers/My_Printer" (above)
    8) Under Printer Model, select "Samsung ML-2510 series"
    9) Click OK; make My_Printer default; and test print
    Results:
    (Printer actually prints) AMAZING!! I finally was able to get it to print. Apple forums is magical
    Hopes this helps.

    Thank you, thank you, thank you!!!!! I spent the past 3 hours trying to figure out why I couldn't get my mac to print on the wireless router. I found your posting about 2 hours into my quest, and it took me another hour to finally realize I needed to update the firmware on the router. I was using something from 2005, so when I installed the update, your directions worked! I never felt so happy to hear the printer! :-D
    If you hadn't posted this, I would have never figured it out...thanks again!

  • How to print to two printers via network?

    Hi,
    I just moved into a new house with ethernet cabling throughout. I'd love to print to my two printers (HP LaserJet 1012 and a Canon iP3600) via the network without using a computer. However, I can't figure out how to do it.
    So far, I've tried:
    Attaching a USB hub to my 1st generation Airport Extreme. Didn't work. Don't think they support hubs. I can print to either printer if individually hooked up, just not via the hub.
    A D-Link D-301U USB ethernet print server. Misread the specs. Thought this came with two USB ports. Tried each printer individually, but couldn't figure out how to hook it up. Failed utterly with a USB hub attached.
    The issue is NOT the network connection. No problems plugging my computer directly into the ethernet on the wall and getting great connectivity.
    Any suggestions how to do this? I've heard that the latest Airport Extremes support printing through a USB hub...
    Thanks in advance.
    Kevin

    http://www.iogear.com/product/GMFPSU22W6/
    http://www.pcstats.com/articleview.cfm?articleID=1709
    http://www.bizrate.com/networking-products/2-port-usb-print-server/
    Next issue -
    The drivers provided by HP and Canon for those printers are USB-Only! You will have to use third-party drivers for each, to use the standard network print protocols. Apple has included one set of third-party drivers, Gutenprint, in OS X. To see if your printers are supported by the latest Gutenprint version, check here:
    http://gimp-print.sourceforge.net/MacOSX.php
    The two other sources of third-party CUPS drivers are:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx
    http://www.printfab.net

  • How to get SapScript and Smartform printed in one spool request?

    Hello experts,
    I want to print the production order package in one spool request.
    Print program consists of Smartform and SapScript.
    First page is in landscape format with barcode(Smartform) and the rest is in portrait format(Sapscript).
    In SAP documentation is written that it is possible for several Smartforms to be printed in one spool request.
    Is it possible for 1 Smartform and 1 SapScript called from a single program to be printed in one spool request?
    I have tested it with calling first the Smartform control-no_close= 'X' without success.
    Can anyone tell me if this is possible and how?
    Thank you.
    Kind regards,
    Danijela

    Hi
    In the driver program .
    *"Selection screen elements............................................
    SELECTION-SCREEN BEGIN OF BLOCK block  WITH FRAME.
    PARAMETERS:
    p_script   RADIOBUTTON GROUP rad1,
    p_smartform RADIOBUTTON GROUP rad1,
    SELECTION-SCREEN END OF BLOCK block.
    *"Selection screen elements............................................
    SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME.
    PARAMETERS:
    p_single RADIOBUTTON GROUP rad2,      " All the spool request
    p_ind    RADIOBUTTON GROUP rad2.
    SELECTION-SCREEN END OF BLOCK block1. " Single spool request
    If p_script EQ 'x'.
    w_form = 'Y_SCRIPT'.
      Elseif p_smartfom EQ 'X'.
       w_form = 'Y_SMARTFORM'.
    ENDIF.
    call function 'SSF_FUNCTION_MODULE_NAME'.
    Call function 'SSFCOMP_OPEN'.
    w_control-no_open   = ' '.
        w_control-no_close  = ' '.
    *"Single spool request..................................................
        IF p_single EQ 'X'.
          w_control-no_open   = 'X'.
          w_control-no_close  = 'X'.
        ELSE.
    *"Individual spool request.............................................
          IF w_flag NE '1'.
            w_control-no_open  = 'X'.
            w_control-no_close = ' '.
            w_flag = 1.
    CALL FUNCTION '    '-----> smartform function module.
    CALL FUNCTION 'SSFCOMP_CLOSE'.
    Regards,
    Sravanthi

Maybe you are looking for