Barcodes are not shown in the client machine

Hi,
We are using asp.net web forms for launching crystal reports.  Crystal Reports rpt with barcode has been designed in Crystal 2008.  Barcode field has been defined by right clicking the required field and selecting Change to Barcode u2026 and the barcode type is selected.
Barcode is shown when we launch the report in the web server.  When we launch the same report in the client machine barcode is not shown to the user.  The barcode font u201CCode39AzaleaWide2u201D is not available in the client machine.
How to overcome this issue without installing the font manually in each client machines.  Crystal Reports 2008 is installed in the web server.
I need some clarifications
1. Whether the barcode fonts should be installed (mandatory) in the client machines.
2. On launching the report whether the barcode fonts will be downloaded from the web server to the client machine
3. Are the barcode fonts are freely distributable to all the client machines both internet and intranet users
4. Is there any document available regarding this issue

Hi,
Please check [KB1588027|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383338333033323337%7D.do] for the answers.
It is your call on how to distribute the fonts. Reports will not download the fonts on it's own.
Thanks,
Saurabh

Similar Messages

  • Approved and published items are not shown in the catalog search

    Hello all,
    We are implementing SRM 4.0 SSP scenario .
    To support shopping of EBP we are also implementing CCM 2.0 as an add on.
    Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
    No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
    Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
    Do i have to approve the categories too and if yes can you  explain me how to do this?
    I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
    Thanks a lot for your help.
    Best regards,
    Bernd

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

    Yes, junker thumb drives pour like rain in the market.  
    Which makes are working on your Air, and which arent?
    Stick to Sandisk and a couple of other reliable mfg. of memory sticks

  • I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

    I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
    After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
    How to pair show in a certain order, for example, sorted by name.
    grateful
    Julio Cesar

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • Workflows are not shown in the OAM aplications front end but exists in LDAP

    Hi
    In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
    due to this not there in production, when i tried to create a user, it says i donot have access rights.
    When i try to create and add workflows in the LDAP, the server rejects with the following error:
    Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
    the entry is : last line shows obwfstatus as deleted ...
    dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
    modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
    modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
    obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
    obwfstatus;vdcsn-5038aa2900000001000d;deleted:

    Edit the targetNamespace to any name less than 60 chars and they try again
    Regards,
    Prateek

  • Ios 5.1: my calendar dates are not shown in the notification center

    My calendar dates (from today and tomorrow) are not shown in the notification center. Under notifications I have activated the calendar app. What can Ido?

    IOS / is no out for a couple of weeks and Apple seems to be reluctant to fix this problem. As a business device it becomes rediculous to be not able to see my calender entries anymore in the notification center. Is Apple now leaving the business arena and focusing on toys ?

  • Ratings and picks are not shown in the pictures in the filmstrip, although marked in the LR presets. Who can help?

    ratings and picks are not shown in the pictures in the filmstrip, although marked in the LR presets. Who can help?

    found the solution: the filmstrip was to small !!!

  • Dear Apple community, some purchased songs from iTunes store are not shown in the album, how can I download them?

    Dear Apple community, some purchased songs from iTunes store are not shown in the album, how can I download them?
    I already looked through this: http://support.apple.com/kb/HT2519?viewlocale=en_US&locale=en_US
    However my itunes does not display the 'library' icon. Some help would be greately appreciated!
    Cheers!
    Andy

    Hello
    In itunes...preferences you can change the setting to import songs instead of mp4  to mp3. Afer changing this setting, right click to the songs and than you are able to convert to mp3. ths's it

  • Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column. Now in V 5.0.5 page elements are not shown, just the page title, and under that about:blank.  Suggestions? Thanks.

    Formerly I could download YouTube videos by double clicking the largest size page element in the Safari activity window address column . Now in V 5.0.5 page elements are not shown, just the page title, and under that "about:blank".  Also, the activity window used to show sequential activity and now each new page replaces the last. Thanks for any suggestions re how to restore previous activity window function.

    Not all YouTube videos are available for downloading, but:
    There is the Free  iTube Grabber which can capture almost any audio and/or video stream (it says here) but only works with Intel Macs.
    http://itube-grabber.en.softonic.com/mac
    Firefox Download Helper is also supposed to work, you have to be logged into YouTube first.
    and the RealPlayer Downloader that comes with RealPlayer SP for Mac from:
    http://www.real.com/realplayer/mac
    which also downloads videos from YouTube.
    There is also iTubeX which allows you to download videos (Flash, HTML5 and others), .mp3 and .swf files from almost every website as easily as possible:
    http://www.macupdate.com/info.php/id/27604/itubex
    Lastly: How to download Flash videos and play them in Quicktime using Perian is explained here:
    http://perian.org/#watch
    It's the video at the bottom of the page.

  • DI Server is Not Connected from the Client Machine

    Hi all,
    There was a problem to connect DI Server.But It runs on the Server Correctly.When we run on the Client Machine to connect the SAP DB, It throws an error: -111.
    Code :
            cmp = New SAPbobsCOM.Company
            cmp.Server = "Sap-Server"
            cmp.CompanyDB = "FAST"
            cmp.UserName = "manager"
            cmp.Password = "manager"
            cmp.language = SAPbobsCOM.BoSuppLangs.ln_English
            cmp.UseTrusted = True
            mretcode = cmp.Connect
            If mretcode <> 0 Then
                cmp.GetLastError(merrcode, merrmsg)
                MsgBox(merrmsg)
            Else
                MsgBox("SAP B1 - Data base Connected Successfully!")
            End If
    Thanks in Advance
    Regards,
    Suresh.G

    you are not using DI server to connect, your using DI API.  Check if your client machine has the DI API installed.  If not you can get from the installation cd or the lastest patch installed under packages/DI API folder.

  • Measure Values are not shown in the pivot tables

    Measures without aggregation (in rpd) are not shown in pivot table.
    Im trying to add multiple columns in the fact table as measures,one which is summable had has the SUM function and three which are not summable.
    The initial report will be as follows and I have been able to get the data displayed.
    Year | Month| Company Name| SUM(C1)| C2|C3
    However if I pivot the table as follows data in column C2 and C3 are not Displayed.
    Columns
         Year     
              Month     
              Company     
    Rows                    
    Measure Lablel                    
    Measures
         SUM(C1)     
                   C2     
                   C3                    
    Should we have an aggregation rule applued in C2 and C3 ?

    Yes, all the column entries must have agg rule. You can specify one such as 'first' in the pivot table.

  • Functional locations are not transfered to the client

    Hi,
    I have the problem that no functional locations are transfered to the xMAM client.
    I defined a func. loc. selection variant and assigned it to the master data selection of xMAM.
    If I create a new notification using a func. loc. it isn't shown on the client (weather the notification or the func. loc.). If I open the notification on the backend, I receive the message that the notification is already transfered to the client. But where is it???
    Any idea?
    Thank you and regards,
    Florian

    Hi again,
    after some testing, I got it working.
    1. deleted all log messages for my mobile device (MEREP_PURGE).
    2. executed MEREP_EX_REPLIC with MAM30_030
    and then it worked. Now funcional locations are transfered to the client.

  • Under "CLIP" all featured options are grade out. Please Help!!! Also the blade and blade all are not shown in the tool bar...

    Hello People. I just reinstalled my sound track pro which took me forever, dah . And now I'm having difficulties with using some options that are listed under the  "Clip" they simply all grade out. Also some tools such as blade and blade all are not listed in the tool panel. Please help me people. Thank you all.

    People, never mind about the Blade Tool I found answer on the community board. Thank you. But still looking for grade out  issue.

  • Images are not visible in the client

    Hi All,
    I have created a Web Dynpro application for laptops using SAP Netwever Composition Environment 7.1 .
    I have put the images in src\mimes\Components\com.utility.comp.UtilityComp (utility is the name of the application)  folder and have specified the name of the jpg file in the source property of the Image UI element.
    I am able to see the image in NWDS but not in the SAP Netweaver client . There is an empty space instead of the image in the client .
    I have even set the visible property as visible.
    It would be nice if you get help me out in displaying the images.
    Thanks ,
    Madhu.

    I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
    This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
    <?xml version="1.0" encoding="UTF-8"?>
    <deployment>
    <device>
    <repository>
    <mcd name="IrviaDemoApp" namespace="" version="1">
    <action type="install"/>
    <location type="local">
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
    <component name="hpcds.es~irvia_demo_app">
    <applications>
    <application deploy="true" name="IrviaDemoApp"/>
    </applications>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
    </component>
    </location>
    </mcd>
    </repository>
    </device>
    </deployment>
    There is a <source> entry for the mimes directory, where "Component images" are located.
    PD: Sorry about my poor english. I hope you to understand me.

  • SOD's are not shown in the Report

    We have created the connector in Compliance Calibrator for MQA system
    We ran the user Full Synch and Incremental Synch.
    But the Sod Report doesn't show any SOD's.
    SOD's are shown for the different system's the user has same Roles in
    the two systems.
    Is something we are missing?

    Venkat,
      You need to run 1) Full User Sync, 2) Full Role Sync, 3) Full Profile sync if you are using profiles, 4) Full Risk Analysis and 5) Management Reports to see SoD violations.
    I did not understand meaning of this statmenet:
    "SOD's are shown for the different system's the user has same Roles in the two systems."
    What do you mean by this?
    Regards,
    Alpesh

Maybe you are looking for