BarTender and SAP Console

Hi All,
We are working on SAP Console,
we are posting the document using the RF Guns and it is posting well,document is creating in SAP.
after posting the document,label should be printed in ZEBRA printer.
We designed label using bartender software,this label contains barcodes as well.
we downloaded the bartender .ITF file into SAP Script using SO10 txn.
but it is printing only text and value are not printing.
Please can any one tell how to print the label using the RF Guns or RFID.
This is urgent and solutions are highly appreciated.
Thanks,
Srinivas.

Hi there. Have you tested printing barcodes from the BarTender software itself before upload to SAP? If the barcode still does not come out from the software itself then the software is not sending the correct printer controls to your ZEBRA printer. My guess is that it still won't come out even if you print from BarTender.
If the field being printed as a text rather than a barcode then it's most definitely the printer control. I'm not familiar with BarTender as we are using E-Bizco's barcode dll's and PCL barcode server.
If all else fails you could try to create the form using Smartforms. Please see sap help for "New Barcode Technology". With this technology smartforms can print the barcode for you without the need for a separate software like BarTender. So that for me would be a better solution as less things could go wrong. However, this will only work in Smartforms and not for Sapscript.
Please update me on the results then we can continue.

Similar Messages

SAP console and scanner!!

Hi
I Have a req here ..where in two diff types of scanner are attached to diff shipping point and based on the scanner, i need to display a selection screen and hence the output....but the problem is these selection screen needs to be displayed on the scanner screen and SAP console comes into picture....
How to go abt this req?
Regards
Gunjan

Hi Gunjan,
Any doubts regarding SAP CONSOLE would be solved refering these threads
Your job would be typically done with the help of SAPConsole.
Check this link very carefully.It has a very useful description as in how to integrate bar-code data into SAP R/3 using RF Programming and SAPConsole.
http://www.enowa-consulting.com/download/SCM-Dec-Garg-v1.pdf
I am again mentioning the links from the previous reply
For achieving this you need to install SAP console on your PC and a Telnet Server for integration.
1.chk the following links regading sap console installation and configuration,which I suppose is your basic requirement .
RFID
Regarding RFID
Regarding RFID Design
Probably yow will also be required to do RF screen programming.
Check the following link for that,
Re: RF screens development
RF Transaction Programming -
Regarding RF transaction LM19
I suppose this should solve your query
Regards,
Pawan.

WebSAPConsole , telnet serever ,RF terminal and SAP logon screen

What would be the easiest way to connect RF terminal(character based) to an SAP system.
Of course it is via WebSAPconsole. As far as I red WebSAPconsole guide if I want to use it to connect character based RF terminal is the same as preaviously SAPconsole(under e.g.SAP enterprise 4.7 ext2.)
1.st install telnet server (best SLnet 2.6RF from Seattle LABS) and then configure In SAP console administrator in Control panel entered corresponding system ip,sysnr and transaction code(from saplogon)
However on RF terminal SAP logon screen does not appear. But only telnet prompt.
What to do? Should the telnet server and SAP console be on an other machine than SAP server(ECC6)?

Hi Thomas Kremer,
Can you help me to solve this issue!?
I´m facing with same error then you. I did a homogenous system copy and after I finish this SAPINST I install the saplogon and of course I try to accede to SAP system and the first thing that display in system is that short dump --> dynpro_itab_error
What´s this?! How you solve this issue... can you remmember? (I know that already was a two years ago but even so if you remember this can you share with me!?).
Best regards,
João Dimas - Portugal

Difference between SAP SLD and SAP Management console

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shailik

Hi,
SAP SLD is the central information provider in a system landscape.this contains both Component information and Landscape description.COMPONENT Info in sense all the sap products and components along with their versions, And also third party products also.LANDSCAPE desc in sense the description of all the systems in particular landscape.
Example:This can shows exact idea for you.Components like CAF,Webdynpo(WD-java),BPM etc info.And the host names,Message server ports etc.Here we dont have start/stop functionality.
SAP MC provides a common framework for centralized system management. It allows you to monitor and perform basic administration tasks on the SAP system centrally, thus simplifying system administration. Using the SAP MC you can
1.Monitor and control (start, stop, or restart) the SAP system and its instances with a single tool
2.Monitor system alerts
3.Display the list of all access points to an SAP system etc.
We can see difference by looking into http://<host name>:<port>/index.html
Look and feel are also differ.
For more info you can go through these links of sap help.
For SAP SLD:http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
For SAP MC:http://help.sap.com/saphelp_nwce10/helpdata/en/44/c707c053550f2ce10000000a1553f7/frameset.htm
Thanks,
Murthy.

Are WebSAPConsole and Web Console are two different offerings from SAP ?

We have been using SAP Console based on Telnet to provide RF functionality and I know that SAP is now delivering WebSAPConsole which is an enhanced SAPConsole
to support web-equipped devices.
With Mobile Infrasturture, SAP is delivering WebConsole with 6.40 WAS standard and If I understand correctly, role of this webconsole is to help deploy ME clients on the handhelds...etc.
Please comment and correct me if I am wrong ?
Thanks,
Raja

SAP WebConsole is base on WAS architecture.
You can also get the standard framework from cSofgroup, Inc. cSoftgroup, Inc is the certified Powered by SAP Netweaver partner for implementing SAP Console, SAP Centralized Shipping Solution to interface with FedEx, UPS, DHL, LTL, USPS and other carriers.
Please find the attached links about SAP Console & SAP centralized shipping solution and our SAP Netweaver blueprint services.
http://www.csoftgroup.com/aboutus/SAP_Console_WebConsole.pdf
http://www.csoftgroup.com/aboutus/SAP_CentralizedShippingSolution.pdf
http://www.csoftgroup.com/aboutus/SAP Netweaver_BLUEPRINTSVCS.pdf
contact Info : [email protected]
ph# 408 836 7074
www.csoftgroup.com

Sap console bdc

Dear All,
We have developed some customized z-transactions related to standard MIGO
transaction for our Barcode Implementation project so that they can
run on Hand held terminals(HHT) as HHT doesnot Support SAP GUI (for ex : table controls, Tab strips etc.,)
The HHT is connected to SAP console via Telnet.
And we have used some BDCs which are developed using recording (SHDB) in these
customised transactions.
Transactions along with BDC's are working absolutely fine when running on SAP GUI (Desktop computers) .
But when we run these transactions on SAP console and while executing BDC's, it shows
the follwing Message and BDC's doesn't work on sap console.
Message Type - A
Message ID    - CNDP
Message No    - 003
Message       - Function DP_PUT_CLIENT_TABLE45A is not available
Message status- TO is not created
regards,
Rahul Shukla

Hello
The link you have provided is not working. And Have identical problem in completely different context.
I'm trying to use GUILIB.DLL to command GUI from Visual Basic.
To do it I had to write a DLL whish is changing the call covention to VB one. The DLL is just wrapping all exports.
Everyting works fine with Z-transactions and e.g. VD51 but
in VA01 or VD02, after filling the first screen with data sending the Event I get this error (DP_PUT_CLIENT_TABLE45A not available) after calling It_GetEvent.
DO you know any remedy (my patch level is 57 on 6.20 GUI)
thanks in advance for help
Stefan

SAP console goods receipt purchase order

Hi all,
I'm new at SAP console, and I need it to make goods reception from a purchase order with a mobile device (PDA).
Is there any way to make it without performing a Warehouse Management customizing in SAP ERP system??? I've seen a goods receipt menu with several reception options which seems to be WM options (transport orders, etc), but I didn't see the option to make a goods reception with reference to a purchase order (like in MIGO transaction)
Thanks in advance
Regards

OK, thanks a lot, that was very helpful. Now I know how to focus the problem I've some doubts.
I'm going to customize a basic WM to work with the SAP console.
My idea is to do a process similar to the next one:
1) The purchase order is created inn SAP R3 with confirmation type 0004 (for inbound deliveries).
2) Create in SAP R3 the inbound deliveries corresponding to the previous purchase orders.
3) Create in SAP R3 the Transport Orders corresponding to the previous inbound deliveries.
4) Confirm de Transport Orders/Inbound deliveries from the SAP console mobile device.
5) Post the goods receipt for the confirmed inbound deliveries in SAP R3.
Is there any way to avoid steps 2 and 3? I mean:
- Can the inbound deliveries be automatically generated when the purchase order is saved?
- Can the TO's be automatically generated when the inbound delivery is created?
Right now, I'm doing these 2 steps with collective transactions, but if it is possible I'd like to do it automatically.
Thanks a lot.
Best regards

ERROR WHILE OPENING SAP CONSOLE MANAGER

Hello Experts,
i am unable to login to SAP console manager, i see errors in event viewer
could you please guide me how can i remove this errors from event viewer.
when i am opening the windows, i get a pop up message saying, one or move events not closed properly....
IN system log under SAP console i see event viewer errors created...
please help, so that i can start my SAP training at the earliest....
Best Regards.....

Hello
Investigate via the system and/or application logs. Restart the system (cold restart) hardware to clear shared memory.
Regards.

What is the T.code in SAP R/3 for SAP console applications

sequence picking in Hall 52. Batch number 0017137168 was assigned to 2 associates.
One associate was assigned to the picks and the other associate confirmed the TO'S
This is requirement by client
What is the T.code in SAP R/3 for SAP console applications

hall 52

Solution manager, SLD and SAP MC

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shaiikil

We can stop, start SAP services from NWA. Now we cannot say Netweaver, NWA and MMC are similar...
MMC is a tool/enviroment provided by microsoft for starting stopping services, managing user rights, security settings, policies and so on...
this can never be compared with SAP Environment for similarities.
Feel free to revert back.
-=-Ragu

Problem in SAP Console connection - yellow only

Hi Guys
i change the password of SAPC11 at SQL> prompt, alter user sapc11 identified by 123xyz, when i come back and connect the SAP Console, its not work its become yellow. i think i got some authentication problem due to change of password in Oracle, is there any body help me out, how to set the password at the console again
thanx in advance

Hello,
It is not always safe to change sap schema id password via sql.As this password has to be stored in SAPUSER table where from the work process makes a SELECT against the SAPUSER table and reads the password of SAP<SCHEMA-ID>. Then the work process connects with username SAP<SCHEMA-ID> and the password retrieved from the table SAPUSER. In case of any deviation connection cannot be established and the work process stops with an error.This causes u the prob.
Try resetting the password again via brtools.
In the sap server run BRTOLS from cmd prompt then proceed as follows
Brtools----->Choose Additional Functions--->Choose Change Password of DB user
Enter choice 2(Database User/Password)
In user prompt give sapc11 and in password prompt put the password u had changed earlier ie abc123.
Then enter c (for continue) u will be prompted for the new password
When u put the new password it wont be displayed in the prompt just type
Complete the entire guided process.
Hope this resolves your prob.
Dont forget to award points if resolved.
Regards

SLD and Management console

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shailik

hi
its not true,you can not start and stop services using SLD.
SLD is the central information provider where all your software components,products etc are maintained.
it also contains information about all installed systems like Business systems etc .
Where as SAP MMC,
it will perform administrative tasks.
it is used mainly for starting and stopping the servers and to monitor log files etc..
Regards
sowmya

1 SAP Console for 2 clients (on the same system)

Hi,
We are merging two business units on 1 SAP system. In the beginning they will both have their own client on the same system.
Within both BU's SAP Console is being used. Can we use one SAP Console for both clients?
Or are separate SAP Consoles needed?
If it is possible to use 1 SAP Console, please let me know how (what to do).
Thanks in advance for your help.
Cheers,
Thomas.

Instead of read-only access to each other's iTunes directories, I followed instructions posted elsewhere on this forum and have ITunes in both accounts pointing to the same physical file. From my account, I can see all the songs, both the ones loaded from CDs and the ones downloaded from ITunes (using my ITunes account). From her account, she can see the songs I loaded from CD, but not any of the songs I've downloaded.
If I share my ITunes library, then she can open the shared file and see all of the songs, downloaded as well as those from CDs. However, if she selects any of the downloaded songs, she cannot put them into playlists or otherwise copy them to her IPod.
She doesn't have an ITunes account. Her ITunes is set up to use my account and is one of the two authorized "Computers" for my account. I thought that going into ITunes and authorizing my ITunes-account would have solved the problem, but it doesn't.
I'm running the latest ITunes (Macintosh) software, version 7.0 (7.0).

Abap ECC SAP Console guide

Hi,
I am looking for an abap best practice guide for SAP Console on ECC6.
Anyone know a link?
Is there a big difference from developing RF screens in 4.6?
Thanks,
Kroc.

Hi,
thanks for that. Maybe 'Best Practice' is the wrong term to use, seeing as SAP use it for their own purposes.
I am looking for a developers guide for creating SAP Console Screen's in ECC 6.0.
And RF = Radio Frequncy.
Previously SAP suggested copying SAPLLMOB and modify your screens from there. Just wondering if that i still the same.
Thanks.

Extent of abaper role in SAP Console

Hi
Please let me know the procedure that an ABAPER has to follow in the programing of SAP CONSOLE for RF devices.
Raju.

Hi,
I have a requirement to develop an application which will be used in an RF device. In case of ITS MOBILE we will develop a module pool program, an ITS and ICF. Like this what all the technical requirements going to be there while going for an SAP console.
Venkat.

BarTender and SAP Console

Similar Messages

Maybe you are looking for