Base AirPort Extreme and LACINEMA Black Max

Hello..
My name is Cristiano, i'm from Rome (Italy)..
I have a small difficult for how i config connect from Base Airport to Lacinema Black Max and from Lacinema Black Max to Base Airport.
I have buy LACINEMA BLACK MAX
(see this link http://www.lacie.com/it/products/product.htm?pid=11229)
The problem is, i have subscribe and write on forum from LACIE.COM and say that is probability the config on base airport isn't complete...
If you know this LACIE and how is the config of airport for connect, please can you help me?
Because is 2 weeks that i have'nt resolved!
Thank you very muach

It is Mac OS Extended (Journaled).
Tried to repair the disk. That produced interesting results! I got a message telling me it couldn't repair the disk and to back up as many files as possible, reformat the disk and restore the backed-up files.
I wonder if that means my hard drive is on it's way out then? I've had it a few years, but I really haven't used it much. For the first year I don't think I turned it on. Maybe I should buy I new one.
Thanks so much for your suggestions. If you hadn't suggested that, I wouldn't have known there might have been a problem with my hard drive.

Similar Messages

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

Which airport is good to extend my wifi, what is the difference between the AirPort Extreme and the airport express base sstation

What is the difference between the AirPort Extreme and the airport express base station and which one can extend my wifi router.

With rare exceptions of a few older routers, neither one can extend a non-Apple router's network wirelessly - they are not designed that way - but you can extend the wireless network if the Extreme is hardwired to the router or you can connect wirelessly and join the network as an access point that will provide remote ethernet access but not produce or extend the wireless signal - here is a comparison of the Apple base stations - http://www.apple.com/wifi/

I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.

It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

How do I include my Airport Express with my base Airport Extreme to extend my in house wireless network??

How do I set up wireless network extension/expansion adding Airport Express to existing Airport Extreme Network??

OK, thanks for the clear information, this really helps.
Locate the AirPort Express about half way between the AirPort Extreme and the general area that needs more wireless signal coverage. The more that you have line-of-sight between the AirPort Extreme and AirPort Express, the better the performance will be.
Power off the AirPort Express for a few minutes
Hold in the reset button firmly...and keep holding for an additional 10 seconds while you simultaneously plug the power cord back into the back of the AirPort Express
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
This process is tricky.....you almost have to have 3 hands to do this.
If you have an iPad or iPhone, the setup is almost too easy to be true. In that case.....
Tap on Settings (gear icon) on the home screen
Tap on WiFi
Under the heading of Setup a New AirPort Base Station....
Tap on AirPort Express
The utility will analyze things for a minute, then suggest that the Express be configured to extend the AirPort Extreme network
Type in a device name that you want to use, then tap Next
The utility will set up everything for you automatically. When you see the message of Setup Complete, tap Done and you are good to go.
If you want to use the Mac running (10.6.8) for the setup.......
Make sure that the wireless is turned on at the Mac
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select the AirPort Express and click Manual Setup
Click the Base Station tab under the row of icons
Enter a device name for the AirPort Express
Enter a device password for the AirPort Express
Verify the device password
Adjust the Time Zone setting
No other adjustments are needed here
Click the Wireless tab below the icons
Set the Wireless Mode to Extend a Wireless Network
Click on the Wireless Network Name box and your AirPort Extreme network name should appear as a choice. Click to select that....or manually enter the exact name of the AirPort Extreme wireless network
Make sure that Wireless Security is set to use WPA2 Personal
Enter the wireless network password for the AirPort Extreme
Verify the wireless network password for the AirPort Extreme
Click Update at the lower right of the window and wait a full minute for the Express to restart. A green light on the Express at this point will be a very good sign that things are up and running correctly.
Your Mac will automatically select the AirPort with the best signal quality. If you have an iPhone or iPad, you may need to manually turn off the WiFi when you move the device near another AirPort, and then turn WiFi back on to get the iOS device to connect to the best signal.
Good luck, please post on your results with the method that you choose.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Airport Extreme and a Time Capsule - config recommendations?

Hi!
So I find myself (in a fortunate position?!) with a new Airport Extreme and a Time Capsule.
I have very few requirements - I would like to be able to connect to the Internet wirelessly, and I'd like to be able to backup a couple of Macs using Time Machine (also wirelessly). I realise that the TC can provide me with that functionality nice and easily, but since I have an AE and a TC, I figure it would be good to make use of both, and so I wanted to ask if anyone had any recommendations for a useful configuration?
I think there are 2 basic options I could make use of (have I missed any?!):
1) Use AE as base station and connect the TC to it as an external HD
2) Use AE as base station and also make TC available for back up wirelessly
Does anyone have any thoughts on the above? If you'd recommend 2), what would be your suggested approach as I think I'm right in saying that 2) could be done in several ways? Roaming? WDS? Just setup TC as a stand-alone wireless box with no internet connection? (does this latter approach mean I could connect to the internet and backup at the same time - I'm guessing not?)
If 1) is the way to go, is it just a case of putting an ethernet cable between the 2 boxes?
Any thoughts would be hugely appreciated!
Many thanks

I would use the Time Capsule as the wireless base station connected to the modem. Then I'd use the Airport Extreme to extend the network or to create a roaming network (ethernet cable betwee the units), whichever worked best in the premises. Naturally, Time Capsule would be used for backups of all machines equipped with Time Machine. Have never hooked up any Apple equipment but from my understanding of it, this is what I'd try.

Using a current Time Capsule with Airport Extreme and Airport Express Older generation

I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet? I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6. Is there a tool to assess the local network speed?
The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing. Not even streaming music seems to work and it stutters to halt.
I had expected that the dual band functionality would allow fast local connections where needed. What do I need to change?
Thanks you.
Tom

Hi Bob,
The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
- round extreme base station supports a printer only - remote WDS indicated in set up
- airport express supports remote speakers - set up does not indicate WDS status
I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network. Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network. It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network.
Obviously, this will need some more experimentation but any input would be appreciated.
Thank you and regards,
Tom
PS> Timezone wise I am currently living in Australia - must change my profile one day.....

I need to share a file with sec.(windows based). She uses it all the time. I need to just download updated version every few days. I have an old airport extreme and was hoping to attach an external drive. Will this work?

I need to download an updated version of a file every few days to use. My secretary works on the file all the time. I thought i could use my old airport extreme and attach an external HD and set up a network to do just this. At work we alll use pc's. How can i make this work? At the moment we use usb stick to transfer which is getting to be a bit of a pain as the file grows every week. Presently 5GB.

I thought i could use my old airport extreme and attach an external HD and set up a network to do just this.
Yes, you can use either the 802.11g or 802.11n AirPort Extreme Base Station (AEBS) to attach an external USB HDD for file sharing. Either AEBS model would allow you to share out this HDD to either Macs or PCs. From the PC, the shared HDD would appear as a network drive which you can map via Windows Explorer.

Can I connect an external hard drive to one of the ethernet port of the airport extreme and access it from my Mac or PC?

Can I connect an external hard drive to one of the ethernet port of the airport extreme and access it from my Mac or PC?

If this hard drive is part of a NAS device, then yes it should be accessable from either a Mac or PC while connected to the AirPort Extreme Base Station (AEBS) by Ethernet.

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops
Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and time capsule upstairs to get complete coverage

In theory, yes. If you configure the two base station into either an extended or roaming network configuration, you should be able to walk a laptop between routers and the laptop should attempt to connect/reconnect to the base station providing the stronger signal ... but, in reality, this is not always 100% true.

Airport Extreme and connecting a hard drive

Hello All,
Thank you ahead of time for your help! I have a couple of questions regarding the set up of my airport extreme and an external hard drive.
What I want to accomplish is using the airport extreme to ONLY share a hard drive for backup and sharing other files through out the house. My housemates already have the internet going through their router, so there is for the airport extreme. Can a macbook pro (13in intel) receive two wireless signals, one that is the internet and the other from my airport extreme (that shares my hard drive)? If so, how is this done?
Any assistance would be more that appreciated!!
Thanks!!

Hello njoza. Welcome to the Apple Discussions!
The simplest way to accomplish this would be to connect the 802.11n AirPort Extreme Base Station (AEBSn) to the Internet router by Ethernet; reconfigure the AEBSn as a bridge, and disable its wireless radios.
In this configuration, you can still share out the hard drive and only need to connect to the Internet router's wireless network for both drive & Internet access.

Airport extreme and printing on ipad

I have an airport extreme and a usb printer connected to the airport extreme. I'm trying to print using the airport extreme to a non airport printer I don't see the printer on the ipad when I select printer. (nothing shows up)
But when I add a printer on my mac that is connected to the airport extreme I can see the printer and it shows up as bonjour. (two entries show up, one with the location set as the base station the other nothing showing anything in the location option.
Any idea's why the printer doesn't show up on the ipad or my iphone?
Thanks

Since you do not have an AirPrint compatible printer, you will need to install an App like Print Central to see if it might allow printing from the iPad and iPhone. Most printers are supported, but you really will not know if it will work until you try.
PrintCentral for iPad on the iTunes App Store
Please post in the support area if you need more help in that regard. We are not iPad and iPhone experts here.
Using iPad Using iPhone

My devices not automatically switching between Airport Extreme and Airport Express in extended network

I have setup an extended network in my home using an Airport Extreme and an Airport Express. The Extreme is connected directly to the FiOS modem and the Express is being used as the extender. The nework is setup fine, but my devices (MBA, iPhone, iPad) are not switching base stations when the signal becomes poor on the one it's connected to. For example, I am upstairs with my MBA and a great signal as I am connected to the Express. When I move downstairs to where the Extreme is setup, the Wi-Fi connection becomes poor even though I am litterally sitting next to the Extreme. To force it to connect to the Extreme, I need to shutoff the Wi-Fi on the MBA and turn back on. At this point, the MBA will connect to the Extreme with a excellent signal.
Any thoughts on why the MBA is not automatically switching?
Thanks for the help!
Brian

The first troubleshooting step for any kind of network "issue" is a complete power cycle of the network. This gives everything a "fresh start" with new connections.
Power off the entire network.....all devices....in any order you want
Wait a minute or two
Start the modem/router first, and let it run a full minute
Start the AirPort Extreme next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network again with the MBA and report on your results
Do not worry about the iPhone and iPad....they are pretty much hopeless as far as automatically switching from one access point to another....but the MBA should if it is working correctly.

Some basic question of Airport Extreme and Airport Express

As I know, my G4PB is installed Airport Extreme and it seems like working wireless Internet connection during travel. But which case do I need additional things like Airport Express (if I undestand this wireless technology correctly)?

blue sky,If all really depends on what you are trying to achieve.
If you wish to surf the Internet when you're out and about then you can just walk in to Starbucks, for example, and log-in - you already have all that is required.
If you want to use the Internet wirelessly at home then the Apple Extreme Base Station, an Airport Express or much cheaper 3rd party gear can help (although some additional hardware may be required dependimg on how you connect to the Internet).
If you want to surf wirelessly, stream music from iTunes to your home Hi-Fi and use a USB printer wirelessly then the Airport Express is the puppy.
If you need to share an Internet connection as well as a network with many wired and wireless users then the Airport Extreme Base Station could help.
Try reading the Airport Page to consolidate your ideas of what you want to achieve, or use this home networking wizard.
Either way you should be aware that you don't have a Powerbook Titanium (On a Ti the ports are tidy on the back under a neat cover and it has a slim 1" thin design) but rather you have a PB Aluminium (ports scattered on either side and it's approx 1.25" thick!)
mrtotes

Base AirPort Extreme and LACINEMA Black Max

Similar Messages

Maybe you are looking for