Base Currency Or Base Amount Does Not Have a Value?

Hi
I've received the following error on the PRC: Distribute Borrowed and Lent Amounts process: Base Currency Or Base Amount Does Not Have a Value
Does anyone know what it means?

Hi
Do you have different currencies for your provider and receiver operating units?
Is there a difference between the transaction currency Ithe expenditure item) and the receiving OU currency?
Verify daily exchange rates exists for the relevant transaction dates.
Dina

Similar Messages

  • Visual Studio 2012 SharePoint Project Error : The partial project item type does not have a value for this property

    Hi,
    I am getting this error from visual studio 2012 whenever i try to create the following project types:
    - Workflow Custom activity
    - Web parts
    The error is as mentioned below
    "The partial project item type does not have a value for this property"
    Due to this the when I add above type of items in my project, they show a red cross icon against them.
    Please let me know If have you any solution?

    Hi
    I had same issue. Below is the solution
    Installing
    "Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
    "http://www.microsoft.com/en-in/download/details.aspx?id=39305")
    Hansraj Rathva

  • Err CGETSEQ02 The AW !PRD  dimension does not have a value at position 0

    Hi,
    AM getting the error
    Please note the following error: CGETSEQ02 (CGETSEQ02) The <AW>!PRD
    dimension does not have a value at position 0in the code line
    limit &_dim to children using &_old_hrel
    _dim --> PRD
    _old_hrel --> some relation objectCan someone please tell me in which scenario this error may occur??
    Thanks,
    Prabhu

    I am getting the same error when running the Archive Demand Plan process. How did you resolve this issue
    Thanks
    Vijai

  • HT3500 I am trying to hook up my new Canon MG5320 printer wirelessly to my MacBookPro with OSX.8.2.  The Airport Extreme Base Station does not have a WPS button and so I seem to be stymied even though the printer detects the Airport Extreme.  Suggestions?

    I am trying to set up my new Canon MG5320 printer to my wireless network.  However, there is no button on the Airport Extreme to push when I get to that step in the set-up directions.  I am using OSX.8.2.  Suggestions please!

    If the display shows the "Press and hold the WPS button..." message on the MG display, press the red Stop button on the MG and then select Standard Setup. The MG will search for networks and should display your Airport Extreme's network name. Select this and then enter the password to connect to this network.

  • HT3702 I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base co

    I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base costing, a refund.
    Kevin

    I don't know what you are saying. How do I get my money refunded.

  • Excise base amount is not changing as per the scheduling agreement

    Sub: in migo excise base amount is not changing as per the scheduling agreement type LP ( time dependent ).
    I have created the scheduling agreement type LP with time dependent.
    I have maintained the price value in two validated period i.e
    01/07/08 to 31/07/08 price is 100 rs.
    01/08/08 to 31/08/08 price is 200 rs.
    I have maintained the delivery schedule on
    15/07/08 of quantity 1 nos.
    When I am doing the goods receipts for the scheduling agreement on
    Document date I am giving 15/07/08.
    Posting date I am giving 15/07/08.
    I am giving the posting date in the excise also 15/07/08.
    After item ok.
    When I will the excise base value it is taking 200 and also excise duty is also calculating on 200.
    When I will post the document
    The stock account and GR/IR account is taking 100 only
    And excise duty is posting for rs: 200 only
    Why the excise base value is not changing as per the validity period.
    What setting I have to do the change the excise base value as per the validity date maintained in the time dependent .
    regards
    jrp

    dear sir
    doc date and posting date i have given 15/07/08 and also excise posting date i have given 15/07/08,
    but excise base value it is taking Rs:200 .
    in inforecord price date category 5-goods recepit date i have given
    yes i ahve changed the excise base value it will post , if i will not change the excise base  value i will post rs:200 only and GR/IR clearing account will post Rs100 only.
    why the excise base value will not take based on the time dependent.
    regards
    JRP

  • Airport base station does NOT deliver a solid connection!

    I have an older Airport base station (an extreme-square, flat, white, you know the one). Ever since I installed the most recent firmware update I get next to no data flow through from the provider. If I connect direct to the provider router via ethernet cable I get amazing connectivity speeds. I change the set up to connect via the Airport and I get either no connection or 5 KBS.... a speed, when it available is a joke. While trying to run through the Airport my Airport signal is full strength. It appears the base station does not know how to digest and dispense the information from the service provider into a full band of connectivity. The problem exists with both Apple laptops in the house. I have done all the required resets and restarts and to no avail. Connecting direct, which is a HUGE hassle, provides amazing speeds. I had none of these issues before I did the firmware update about three days ago (about 12.18.09). Any thoughts or directions to help me out?
    Thanks!

    Your Express requires an IP address to be issued by the device connected to its WAN port, in most cases that is a cable modem.
    Power down your modem and let it rest. Leave it powered down, connect it to your AirPort Express, then power it back up again. This permits the modem to supply the Express the IP address it needs.
    Like it says, if you still can’t connect, contact your Internet service provider.

  • Steady green light on A1084. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it.  Is there a fix?

    Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier.  Is there a fix?

    I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp.  The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express.  It would be nice to play Airtunes while simultaneously accessing the Internet.  I don't understand your question about what program I am using for which I require AirPlay.  I am not learned about computers in general, and even less so about Macs than PCs.  I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier.  I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo.  I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

  • My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

    My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

    The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
    Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

  • Error: Vendor 500075 does not have a bank account in transaction currency

    Hi Experts,
    I am getting a hard error while trying to post Vendor FI invoice.
    Error: Vendor 500075 does not have a bank account in transaction currency
    Message no. Z0066
    Please advise.
    Regards,
    Simar

    Hello,
    Please check ob28 ( or ggb0 ) to see if you are using any validation rule to this process. This message Z0006 seems to be
    a custom message defined by your company.
    Regards,
    REnan

  • Base Amount should not be more than PO net price

    hi
    Base Amount should not be more than PO net price , in MIGO  if the Material is excisable excise tab will be populate i can able to change the base amount . i need the restriction Base Amount should not be more than PO net price , this requirement for purticarly for the dealar relegated tax codes . i am not maintain any conditions relegated BED ,ECESSand SECESS in the taxcode . i will eater the excise tab in MIGO or J1IEX Directly . please advise me how to restrict
    @sakhi

    if that is the case why are you proividing the Authorization for MIGO_GR transcation...........Restrict the MIGO transaction and try to give MB01 transaction .So that there will no discrepancy in PO to GR....

  • ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)

    Dear,
    i 've got this error when i tried to upload my book using iTunes Producer and i don't know how to solve it
    if any one know the solving please inform me
    ERROR ITMS-4103: "Country WW does not have a valid currency" at Book/Offer (MZItmspOfferPackage)

    Hello ModernGuide
    For specific issues with uploading your book and dealing currency, you will want to contact Apple Directly and the article below will have contact information for phone support or support through email.
    Authors & Book Publishers: Frequently Asked Questions
    http://www.apple.com/itunes/content-providers/book-faq.html
    Apple provides support to iBooks Store authors and publishers via email and phone:
    Send an email to [email protected]
    If you have an Apple ID enabled for iTunes Connect, you can contact the iBooks Publisher Support team by phone, Monday through Friday from 7 a.m. to 5 p.m. (PT). Local phone support is available in English in the countries listed below
    Austria, Australia, Denmark, France, Germany, Italy, Netherlands, Norway, Spain, Sweden, U.K., U.S.
    Regards,
    -Norm G.

  • Query filter with amounts does not alway work

    I have several customers with the same problem.
    They create a query in Webi containing some simple objects. In the filter pane they have for eksample amounts less than  -2000
    This should give a report with rows where the amount is less than -2000. But in some cases there are rows with amount = 0.00. It does not matter what value they put in the filter, it could be -2000 or 1000 or 200 etc. the problem is that some rows with value 0.00 slips through and are listed in the rows of the report.
    I have been searching for a note for this problem, but haven't found any yet.
    The BOE version is 12.2.5.537
    I do not have this problem on customers who runs a 12.1 version of BOE....
    Thanks
    Pål Risberg
    SAP BO Solution Architect

    Can you post the actual SQL?
    Does this measure object have a sum(table.column)
      (so it goes in the having and is evaluated on the group by level)
    or not
      (so it goes into the where and is evaluate on a row to row basis)...
    In case of the latter you can off course have detail values that pass the test,
    but are counter booked so they add up to zero, and show as zero in BO.
    Good luck,
    Marianne

  • "null" does not have metadata

    I have an abstract base class named "Activity" and a derived class named
    "Transfer". When trying to retrieve an instance of "Transfer" using
    Transfer t = (Transfer)pm.getObjectById( new Transfer.OID( 100 ),true );
    it throws
    Nested exception is:
    Type "null" does not have jdo metadata.
    javax.jdo.JDOUserException: Type "null" does not have jdo metadata.
    at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.getMetaData(J
    DBCStoreManager.java:645)
    at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.initialize(JD
    BCStoreManager.java:254)
    at
    com.solarmetric.kodo.runtime.StateManagerImpl.<init>(StateManagerImpl
    ..java:100)
    at
    com.solarmetric.kodo.runtime.PersistenceManagerImpl.getObjectByIdFilt
    er(PersistenceManagerImpl.java:957)
    at
    com.solarmetric.kodo.runtime.PersistenceManagerImpl.getObjectById(Per
    sistenceManagerImpl.java:865)
    at java.lang.reflect.Method.invoke(Native Method)
    However, the following is successful:
    Transfer t = (Transfer)pm.getObjectById( new Activity$OID( 100 ),true );
    What are the rules for derived classes? Do they each need/not need an
    OID inner class? Does the base class need/not need the OID inner class?
    When calling getObjectById using the base class (Activity$OID) how
    does it know which subclass I'm interested in?
    Thanks

    Typo. Should read:
    However, the following is successful:
    Transfer t = (Transfer)pm.getObjectById( new Activity.OID( 100 ),true);
    Michael Welter wrote:
    I have an abstract base class named "Activity" and a derived class named
    "Transfer". When trying to retrieve an instance of "Transfer" using
    Transfer t = (Transfer)pm.getObjectById( new Transfer.OID( 100 ),true );
    it throws
    Nested exception is:
    Type "null" does not have jdo metadata.
    javax.jdo.JDOUserException: Type "null" does not have jdo metadata.
    at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.getMetaData(J
    DBCStoreManager.java:645)
    at
    com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.initialize(JD
    BCStoreManager.java:254)
    at
    com.solarmetric.kodo.runtime.StateManagerImpl.<init>(StateManagerImpl
    .java:100)
    at
    com.solarmetric.kodo.runtime.PersistenceManagerImpl.getObjectByIdFilt
    er(PersistenceManagerImpl.java:957)
    at
    com.solarmetric.kodo.runtime.PersistenceManagerImpl.getObjectById(Per
    sistenceManagerImpl.java:865)
    at java.lang.reflect.Method.invoke(Native Method)
    However, the following is successful:
    Transfer t = (Transfer)pm.getObjectById( new Activity$OID( 100 ),true );
    What are the rules for derived classes? Do they each need/not need an
    OID inner class? Does the base class need/not need the OID inner class?
    When calling getObjectById using the base class (Activity$OID) how does
    it know which subclass I'm interested in?
    Thanks

  • I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    I have a late 2008 white macbook.  I have a mini dvi to hdmi adapter, and a hdmi cord.  My cannot get my MB to detect an external monitor.  Nothing happens when plugged in.  Also, my display settings does not have an option for mirroring or arrangment tab

    Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

Maybe you are looking for