Base map not showing

Hello
I have installed OC4J it is running the demo maps given in tutorials.
But it is not showing the base map.
can u suggest me something

Hi,
boss, what are the possible reason for changing the MAP from 4,679.20 to 8,270.59
check your Po price for material in Po as well as qty and check your material price ( stander ) in material master for this material
and analyze it you will get ans for same .
also read following link you will get goo idea about it
[MAP|Moving average price calculation logic of material with Price Control "S";
Regards
Kailas Ugale

Similar Messages

Ovi Map not showing railway lines on N8 (UK map)

Hi
I've recently purchased a N8, and I was suprised to see the UK maps not showing the railway lines. However if I scoll across to Germany for example, the lines are clearly shown.
They used to show up on my 5800 and show up on the Ovi maps website, so why no lines on the N8? Or is it just an issue with my device?
Can any other N8 users with Ovi Maps v3.06 confirm whether they show the rail lines in the UK please.
Any suggestions? I've tried re-installing Ovi Maps and re-downloading the maps but no change.
Thanks.
Regards, Brian.
Solved!
Go to Solution.

What version of the map data do you have as my N8 with 0.2.42.122 shows railway lines eg in Birmingham in the attached image. I have looked in a few places where I know lines run and all have been there, but it is possible that some have been missed.
N8-00 pc059C9F6 Belle
808 PureView pc059P6W5
Attachments:
Scr000087.jpg ‏46 KB

Map not showing

Map not showing standard,hybrid and satellite only only location drop pin is visible

If you havn't already, i would download the latest version of the Maps application for your phone and load the latest map data using map loader.
They can both be found from:
http://europe.nokia.com/explore-services/maps/download
with maploader make sure you delete the older map data before loading new maps (there is a button there for this)
Although i work for Nokia, my opinions are my own!
Got a Maps query? Check our Maps FAQ's

My position in OVI map not showing my correct posi...

I installed new version of OVI maps today.
when I clicked on "my position" , it is not not showing my position correctly,
why it is so? anybody has any experience?

@gavin_street
If Nokia Maps have not been used for a while stored ephemeris GPS data is out of date or similarly if application updated data can become corrupted. You don't mention whether you are hapy for Assisted GPS postioning method to utilise a network access point to contact positioning server = supl.nokia.com or whether relying solely upon the Integrated GPS of device. Try going outside away from tall buildings if feasible, launch Nokia Maps and wait 20 - 30 minutes for it to lock on to position.
It might be an idea to download LeGPSData2 application from Nokia Store so you can keep track of number of satellites acquired:http://store.ovi.com/content/208256
Happy to have helped forum with a Support Ratio = 42.5

MAP not showing perfect

Dear SAP Guru,
My MAP is not showing perfect(Seams to me).
MAP = 8,270.59
Total Stock = 10,823.288
Total Value = 58,220,630.81
Possible MAP = Total Value(58,220,630.81) / Total Stock (10,823.288) = 5,379.20
But when I am doing GI, its takes 5,379.20 .
Will you please clear why it is showing the MAP = 8,270.59 and what are the possible reason.
Thanks for your advance co-operations.
Best Regards,
Shoyeb
Edited by: AMShoyeb on Feb 1, 2012 8:31 AM

Hi,
boss, what are the possible reason for changing the MAP from 4,679.20 to 8,270.59
check your Po price for material in Po as well as qty and check your material price ( stander ) in material master for this material
and analyze it you will get ans for same .
also read following link you will get goo idea about it
[MAP|Moving average price calculation logic of material with Price Control "S";
Regards
Kailas Ugale

Ios 6 map not showing directions?

I using a iPhone 4 downloaded latest iOS in my phone but its not showing directions in map app please fix this.

If you mean that apple maps doesn't work very well in Saudi Arabia then you may find some answers here:
https://discussions.apple.com/thread/4311003?start=0&tstart=0
Sadly it doesn't give you the answer you might want but many hope that google maps will release an app soon

Map not showing in places

I'm using iphoto 09, and suddenly, no maps are showing up in places. In the get info section of a photo, the location name still shows up, but there are no maps, no pins for the maps, etc. Anyone have any idea? The map area just shows up blank.
Thanks

Hi, I’ve found a similar topic with some advice. However, none of them has solved my problem with iPhoto ’09. My brother hasn’t got such problem in iPhoto ’11 on his Mac but I’ll wait for WWDC news before I decide to upgrade to ’11. Maybe our problem is related to the new stuff which is probably being tested now?

Color Map not showing time-dependent change

I am using the latest Sound and Vibration Measurement Suite in Signal Express. I have a Spectral Map step in my program, which includes a Color Map. I am recording an accelerometer's transient response to an impact, and want to see the time-dependent frequency intensity changes as a function of time, so a color map should be perfect. I have no problem recording the accelerometer's transient response in a time graph, and I also see the power spectrum in another graph. While the color map indeed shows various frequencies at different intensity levels, I don't see the intensity of any of the frequencies change over the course of the 200 ms that I'm recording, while the time graph clearly shows the decaying waveform. Why doesn't the color map show a decrease in intensity of the respective frequencies as time progresses through the transient? I have everything set up to display and record the first 200 ms of the impact. At the end of this period, the intensity should go to almost zero.
Please see the attached .seproj file to review the parameters I have set.
Also, with the same .seproj file, I will occassionally get a Buffer Overflow error. From this file, can you tell me what setting I need to change. But I need to make sure that all data both displayed and recorded, is for the 200 ms timeframe specified (10 ms before the trigger and 190 ms after). The ADC I'm using is an NI 9234 in a cDAQ-9172 chassis.
Thanks,
--Tim
Attachments:
golfclub_200ms_test.seproj ‏258 KB
Log files.zip ‏200 KB

Tim,
I am trying to figure out where this would be able to recognize the changes since the data would be taken from an analysis of one .2 second signal. Have you tried to analyze more than the one signal taken in? When I ran this project I got the display on the bottom right to show one signal as having been read which makes sense when looking at the data. If you wanted to see the changes over the 200 ms timeframe I would have it run continuous DAQmx acquires for that timeframe. It appears the analysis that we see stays static because it is doing analysis of only one data set that came in. I would think that the change in time that you want to see would have to have analysis done on multiple sample sets to notice the differences from one set to the next.
Frank,
National Instruments
Staff Software Project Engineer

I want to purchase an ipad but the program I would use onit the most to access my customer base will not show me the full screen and I can not side it over to show the rest of the ifo. Tis program will work on the Motorola xoom but thats not what I want .

I want to use sagefire a company program for entering customer info and billing but the Ipad will not show the entire screen.

Embie wrote:
I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware. Great. I will replace my faulty hardware manufacturer. Simple, HP never again.
In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you. Please read this post then provide some details in a new thread. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? What is the problem you are having (with the printer...)?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Drive Mapping not showing up in Explorer Drive Listing

Hi, I am having a strange problem.
I have a unc path that I want to map to and everything works fine.
Apart from one user.
When I try to map the drive under the probmatic account, I cant see anything in my drive list.
I can go to Computer and map the location by using the Map Network Drive button. (This works fine and the mapping appears.)
But the mapping doesn't appear if I use Net Use. (It says the command completed successfully but it doesn't show in my drive listing)
I have added the account to the local administrators group and turned off UAC.
It's really strange.
I need it to be able to map using Net Use because I have a batch file with a command in.
Have you come across anything like this?

Hi,
No multiple connection to the share using the same credentials. It's basically saying that I can't connect to the share as more than one instance of the same user.
But it's showing that no sessions exist. It's like it's not cleaning up the connections properly when you close them.
I have found some other articles.
This post sounds similar to what I am describing. It's from the following thread
http://social.technet.microsoft.com/Forums/en-US/4b736ba5-268a-4dcb-a3ee-cc2abff0bb01/issue-with-group-policy-drive-mapping?forum=W8ITProPreRel
Run command "net use" in command line with administrator privilege and see if the drive is mapped.
If you can see the mapped drive in the result of net use but cannot see it in Windows Explorer, the issue may be caused by UAC. Are you the domain adminsitrator?
Similar issues occurred since Windows Vista. See:
http://technet.microsoft.com/en-us/library/cc766208(WS.10).aspx
It said:
UAC may prevent Group Policy logon scripts from appearing to work properly. For example, a domain environment contains a GPO that includes a logon script to map network drives. A nonadministrative user logs on to the domain from a Windows Vista computer.
After Windows Vista loads the desktop, the nonadministrative user starts Windows Explorer. The user sees their mapped drives. Under the same environment, an administrative user logs on to the domain from a Windows Vista computer. After Windows Vista loads
the desktop, the administrative user starts Windows Explorer. The user does not see their mapped drives.
When the administrative user logs on, Windows processes the logon scripts using the elevated token. The script actually works and maps the drive. However, Windows blocks the view of the mapped network drives because the desktop uses the limited token while
the drives were mapped using the elevated token.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
<input id="1f32e2ec-e0e3-481d-90b8-7fcc52f488fa_attachments" type="hidden" value="" />
Marked as answer by
Arthur Xie<abbr class="affil">Microsoft contingent staff, Moderator</abbr>
Friday, June 29, 2012 9:15 AM
Unmarked as answer by
GraffitiK<abbr class="affil"></abbr>
Wednesday, December 19, 2012 3:58 PM
Thursday, June 07, 2012 6:48 AM
Arthur Xie
Arthur Xie
MSFT CSG
32,950 Points
12
4
2
Recent Achievements
New Gallery Rater
Thread Mover II
Proposed Answerer I
Arthur Xie's threads
View Profile
                                    (MSFT CSG)
32,950 Points

Map not showing colors

Hi,
I installed mapviewer 11.1.1.7.2 on OBI EE 11.1.1.7.0.
I created a map in OBI EE analytics and used Color Fill but my map doesn't show me any colors. There are metrics for my dimension values and when I hover over the areas I can the values popup. I also see a strange square with an icon on the upper left of the area. It dissapears within mili seconds.
I think it has something to do with my browser or cache but I cannot find what the problem is. Does anybody of you have an idea?
Thanks!
Marco

Hi Jimmy,
Thanks for your feedback. Unfortunately it's not as straightforward as simply Initcapping values returned from a customer's map query. If we take an example from the map of India, if we were to use the location of 'ANDAMAN AND NICOBAR ISLANDS' as an example. If we were to Initcap that value, the result would be 'Andaman And Nicobar Islands', however the value expected by the relevant AnyChart map is actually 'Andaman and Nicobar Islands'. Note the subtle difference in the word 'and'. That difference will result in the data point not be represented on the map, because AnyChart expects the region names to exactly match those associated with their .amap files. So while I appreciate your frustration, the user needs to ensure that the values they use for the maps correctly match the Map Reference Information outlined in the AnyChart online documentation and also in the show/hide region at the bottom of the page for specifying the map query in the Create wizard, mentioned in Chapter 10 of the User's Guide: http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/maps.htm#BABGGJHC. If it's more helpful, we can certainly update the documentation to clearly state that users need to ensure their values match the case of those expected by the map itself.
Regards,
Hilary

I have 16 gb wifi model brand new but Maps not showing my current location

My iPad is just 2 days old but I don't know what is going on my maps are not able to show my current location I don't
Know what's wrong with this please do suggest me some measures about what to do',and yea I already turned on my location in
Settings then also problem continue ,.,,, pls try to answer my querry

Hi,
I was facing the same issue with my Ipad - wifi.
I have found a simple solution for this but it needs you to have a iphone and period of one week.
if wifi router's mac address is not registered with apple's location services server, the location services on Ipad-wifi does not work, so we need to register wifi router's mac address to apple's server in first place.
If you have a iphone, then try to install 'Find my iphone' app. install it on your ipad also.
Initially when you login to this app with both iphone and ipad, only your Iphone will show location as it has GPS location. and your ipad location will not be reflected on this app.
If you continue to find your ipad using this app on you Iphone, and using your home wifi router, eventually after few days you would be able to track you ipad location, because your wifi router's mac address get registered on apple's server with its gps co-odridnates.
This has worked for my on 3 different wifi routers in last 8 months.
Hope this will hope you.

Airport Express 1st Generation base station not showing up using new Linksys E1500 router. Compatibility problem?

Airport Utility cannot find base station. The AirPort Status Icon is showing on my iMac's menu bar, but when I click on it I do not see an AirPort option in the list --- only the various networks that are within range and the options to Create or Join a network. I have a 1st generation Airport Express (Moded A1264) and recently installed a new router, Linksys E1500. Could the router be the problem? Another computer in the house had to be set up on the router using Cisco Connect on my husband's Window's 7 computer. This was also necessary for our Wii console. When I try to use Cisco Connect to see if it needs to recognize the AirPort device, it gives me certain wireless settings necessary to connect the device (Network Name (SSID), Security key and Security Type (WPA2 or WAP). looked on the site but didn't see an option for setting up Airport Express. I also upgraded from Snow Leopard OS to Lion shortly before adding the new router. I use the Airport Express to play our Tune music on powered speakers in our kitchen and did not think to see if it was operating between the time I upgraded the operating system and the time I installed a new router. I have two different versions of AirPort Utility on the computer 6.0 and 5.6. Any suggestions?

Just spoke with Cisco about the router. They said the router is compatible with the E1500. They suggested that I contact Apple to see if their default IP address was that same as the router (192.168.1.1). They told me I would have to change it if that was the case. How would I do that?

Geographical maps US maps not showing up in Resolver

The current challenge I'm facing is that I was only able to produce US maps by state and/or capitals. I see other maps included in my C:\Program Files\Business Objects\MapInfo MapX\Maps folder. But I couldn't get them to work like the US 8k cities or US County maps. I have data by zip, fips, state, city, but couldn't get nothing but US and US Cities (which were just capitals) to show up, even when using the mapping resolver to select the map layer.
I really would like to produce a complete map of the US by county if possible (where the county is colored by data density). I found with other software I would need FIPS code to map by county, so I found a database I can use to translate my data into FIPS. So can I with CR 2008 produce a complete US map by county now that I have the data to support it? I tried on my own and can'[t get it to work.
I'm using a trial version of CR2008 I D/L to protype a solution. So maybe that is why the maps are unusable. Or maybe it's how I formatted my data that disallows which maps show up in the resolver. I'm not sure. I need a solution soon, and want it to be CR2008 because it fits with my current technologies (Language: .Net 2005, Production: IIS 6.0 on Windows Server 2003).
I called Sales & Tech Support early on to find a solution, and both of them said Maps doesn't come with CR2008, yet the datasheet for the product says it does. So I took a gamble (short on time) and D/L the 30 day version and found there is maps! I need to prove this technology works so I can purchase it and get it setup in production soon, but if it can't do what I need, I guess I'll have to look elsewhere.
Any answer or help would be appreciated, even if it's an answer saying teh product will not do US Counties.
P.S. Is it possible to do POI (Point of Interest) plotting if I have Latitude and Longitudes data in CR2008?
Thanks ahead of time. Attached is the SQL (from MySQL 5.0) and an csv of the data the query produces along with a snapshot of my resolver page.

Please re-post if this is still an issue to the Crystal Reports, Xcelsius and Interactive Analysis - Crystal Reports Design Forum or purchase a case and have a dedicated support engineer work with you directly

1st generation airport express base station not showing up in network utilities

when i plug it in the amber light appears and sometimes blinks and/or sometimes steady. needless to say my desktop imac is not picking up its signal. what do i need to do to make it work or is it just not compatible with my new mac?

Your new iMac should not have any issues connecting to the 1st generation AirPort Express Base Station (AX).
When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.

Base map not showing

Similar Messages

Maybe you are looking for