BASE SYSTEM DEVICE NOT INSTALL PROPERLY

Hi, My server is Proliant DL 380P G8. One of the device driver not install properly.  Base system device properties hardware ids as below PCI\VEN_103C&DEV_3307&SUBSYS_3381103C&REV_05
PCI\VEN_103C&DEV_3307&SUBSYS_3381103C
PCI\VEN_103C&DEV_3307&CC_088000
PCI\VEN_103C&DEV_3307&CC_0880 Please give me link for the right driver. Note:I read this forum, from one of the solution I to this linkhttp://www8.hp.com/us/en/drivers.html But after key-in my product detail I receive this message. "Downloads for this product are not available through this website.
For Enterprise products you may find US-English downloads at the HP Software Depot.
For HP Home and Home Office products, visit HP Customer Care.
If you need additional help, you can contact your local HP representative for information on the specific update methods available for this product." Please help me. thanksthalib

Worked great.
Thanks for you help.

Similar Messages

  • OS Update/Connection to PC fails/ says device not installed properly???

    I connected my Playbook to my computer after the most recent OS update to back it up. Windows 7 ticked along and then said it could not install the device properly. Now with the Playbook connected I cannot get the Blackberry Desktop Software to work because the Playbook is not installed correctly.
    I went to the Device section in the control panel when the Playbook was connected and it indicates a RIM Network Device but doesn't let me delete to have it reset or whatever and when I troubleshoot it it says the device is working properly. But obviously it isn't. The RIM Network Device disappears when I disconnect the Playbook so I can't delete the device that way either.
    In addtion, in the past when I connected the Playbook, I got a drive designation for it. This time I don't.
    Any help would be very much appreciated.
    Thanks.

    As with most any electronics and software, reboots fix many things as it was made by humans and we do make mistakes.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Base system device not recognized

    Hi all,
    I recently upgraded my pavillion dv9700t cto from vista 32bit to 7 32bit.
    Everything is great except for 2 unregonized peices of hardware in the device manager.
    These are:
    PCI bus 9, device 9, function 3
    hardware ids:
    PCI\VEN_1180&DEV_0592&SUBSYS_30CC103C&REV_12
    PCI\VEN_1180&DEV_0592&SUBSYS_30CC103C
    PCI\VEN_1180&DEV_0592&CC_088000
    PCI\VEN_1180&DEV_0592&CC_0880
    and
    PCI bus 9, device 9, function 2
    hardware ids:
    PCI\VEN_1180&DEV_0843&SUBSYS_30CC103C&REV_12
    PCI\VEN_1180&DEV_0843&SUBSYS_30CC103C
    PCI\VEN_1180&DEV_0843&CC_088000
    PCI\VEN_1180&DEV_0843&CC_0880
    any ideas what they are and how i can get them to work?

    Worked great.
    Thanks for you help.

  • The latest version of iTunes did not install properly on my Windows 7 PC.  I am getting the following error message: "Service 'Apple Mobile Device' failed to start.  Verify that you have sufficient privileges to start system services." Can anyone help?

    The latest version of iTunes did not install properly on my Windows 7-64bit PC.  I am getting the following error message: "Service 'Apple Mobile Device' failed to start.  Verify that you have sufficient privileges to start system services."
    I have tried the following troubleshooting steps without success:
    Restart PC
    Uninstall iTunes and attempt to reinstall
    Verify that I am signed in as an administrator
    Download and save iTunes64Setup file, right-click, and run as Administrator
    Disable Norton antivirus software
    Any suggestions would be greatly appreciated!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Missing driver for "Base system device" x2 after Windows 7 install on laptop

    Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
    Both devices report the following code in system information: 
    PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
    I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success.  Any help will be greatly appreciated
    This question was solved.
    View Solution.

    Here is the link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

  • ITunes 11.1.4 will not install properly - windows 8.1, 64 bit.  My only way to recover is to restore my system.  iTunes 11.1.3.8 functions properly.  When will Apply provide a workable update?

    iTunes 11.1.4 will not install properly - windows 8.1, 64 bit.  The only way I have found to recover is to restore my system.  I have unistalled/reintalled iTunes two times.  No success.  iTunes 11.1.3.8 functions properly (following system restore).  When is Apply expected to provide a workable update?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)

    Hi Experts I´m facing this issue.
    This is tp version 340.16.41 (release 640)                         
    HALT 20091029110915                                                
    ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)
    ERROR: EXIT(16) -> process ID is: 9660                             
    tp returncode summary:                                             
    TOOLS: Highest return code of single steps was: 16                 
    ERRORS: Highest tp internal error was: 0233                        
    standard output from tp and from tools called by tp: 
    Any Clue?

    Hi,
    Was the system copied from another system? Or is this a new installation?
    If yes, did you run SE06 after the installation?
    What is the results of trans.log (generated from R3trans -d)?
    Also paste the contents of table TADIR in SE16.
    Best regards,
    Warren

  • I have tried to update my itunes program. It was running great until I attempted the update now all I get is an error message that says "Itunes was not installed properly, Please reinstall itunes, Error 7 (Windows erroe 126)". What can I do to get my it

    I tried updating my itune program. Now all I get is the following message "Itunes was not installed properly. Please reinstall itunes. Error 7 (Windows error 126). WHAT can I do to get back to where my itunes program is running again?
    I have uninstalled the proram and tried reinstalling and get the same error message. The other error message I get is "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem".  I have tried that twice with no luck. Can someone help me get my music back???

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • Satellite A10: 'base system device' after HDD reinstallation

    I have formatted my laptop's hard drive (Toshiba Satellite A10) and downloaded the necessary drivers from Toshiba Europe web site. Everything worked out fine. Then I decided to upgrade my network adapter driver (wrong decision) and it slowed down considerably the system.
    Believing that I was holding the solution in my hands I formatted again HDD and when it came to reinstalling the drivers everything loaded ok except one:
    BASE SYSTEM DEVICE
    Please let me know how to resolve this issue.

    Did you install the chipset utility?
    If not, do that firstly before installing any further Toshiba tools and drivers.
    i recommend you to use the Toshiba Recovery CD.
    Please check also this useful Intel article:
    http://www.intel.com/support/motherboards/server/S5000VSA/sb/CS-022703.htm

  • Windows 7 RC - Portege M200 - Base System Device

    Windows 7 RC is running nicely on my M200 but the Device Manager is showing an 'Other Device' with no driver loaded. It is described as 'Base System Device' and Properties shows its location as 'PCI Bus 2, Device 13, Function 0'.
    I have tried on-line searches and browsing within my M200 for a driver with no success. I have read elsewhere in these forums that the 'Base System Device' could be tied up with the SD Utilities. I have downloaded a fresh copy of the SD Utilities and installed them but still no luck. Certainly the SD Format utility won't work - it does not recognise when an SD card in inserted - so may be the SD Utilities need revision for Windows 7.
    Not a major problem as I can format SD cards elsewhere but it would be nice to get a clean bill of health from Device Manager.
    Has anyone else run into this problem and, even better, found a solution?
    Keith Woolf

    Some progress! I have checked out the IR device; it has a 'later' driver installed than the one listed on the laptopvideo2go website so I have left it alone. It report 'working OK' although I have no means of checking it.
    I found the VENdor and DEVice numbers under Base System Device\Properties\Details\Hardware Ids; they are VEN 1179 and DEV 0805. The 'pcidatabase' decodes these as VENdor Toshiba America Info Systems and DEVice SD Card Controller.
    This seems to confirm that, as I guessed from a thread on another forum, it is the SD Card Controller that lacks a driver and that it is 'Toshiba' who - we hope - will come up with an updated driver 'in due course'.
    Thanks very much for your help; I have learned how to identify PCI problems and have bookmarked the M200 Impressions site - very interesting and I shall keep an eye on your work.
    Thanks again, all.

  • Base System Device driver in WIndows 7

    I recently installed WIndows 7 on my Lenovo 3000 G430 system, and all the drivers except for a few got installed automatically during the installation process...
    But then I noticed in Device Manager, I have 2 devices that are listed under 'Other Devices' that don't have a driver installed. I tried a direct search for drivers online, but it couldnt find any.
    Both of them are by the title 'Base System Device'.
    I checked the Lenovo wesite for drivers, but there are no drivers listed for WIndows 7. A few guys had raised this issue in the forum previously too, but they were not using Windows7, and I did not have this issue when I was using Vista...
    Please help...

    Hi tusharkaul,
    Try below to identify what components they are.
    Check the Device ID to find our its description:
    Right click the unknown device and choose Properties.
    Go to 'Details' tab.
    Choose 'Hardware ids' from the Property drop down list
     Take the IDs and google them and find out the descriptions of the devices. You should know what you are missing.
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Re: Base System-device

    Hello,
    I've installed Windows 7 Iand have noticed that two devices aren't installed properly. Both of them are called "Base System-device" and they are located at PCI bus 4, device 6, function 2 and 3. Any suggestion, plz?

    Hi,
    You didn't provide us much detail about your laptop model. I think, you should update a card reader according to the PCI bus 4, device 6, function 2 and 3
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Maybe you are looking for

  • Extracting XML values with namespace prefixes

    Hint: I put this topic in "SQL and PL/SQL" but that was a bad idea, I think. Hi! I have a XML file:<?xml version="1.0" encoding="UTF-8"?> <?xml-stylesheet type="text/xsl" href="http://test.epuap.gov.pl/FeResourceServlet/wzor_lokalny/InstytucjaPublicz

  • Problem in displaying images

    Dear JSP/Servlet experts, I have problem in displaying images on a JSP page. I stored all the images names in a database and try to retrieve them based on the user selection. When the JSP page is load for the first time the following error occur but

  • Computer died how do I recover files?

    How do I get my purchased downloads back?

  • How can I retrieve my pass code for restrictions?

    For the life of me I can't seem to recall the four digit pass code I used when I go to restrictions. I have tried several attempts but none work. Is there a way to retrieve that information?

  • Darken a pdf file

    I downloaded a trial version of Elemenst 7 to see if I can darken a pdf file.when open a pdf file I get an error message saying it is not a Adobe Photo.. PDF image file. how can I darken a pdf file?