BAse system Device

where can i find the driver of base system device..
the hardware id is
PCI\VEN_1180&DEV_0843&SUBSYS_30DB103C&REV_14

Hi:
Below is the link to the card reader driver for your HP Elitebook 6930p.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&sp...

Similar Messages

  • Missing driver for "Base system device" x2 after Windows 7 install on laptop

    Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
    Both devices report the following code in system information: 
    PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
    I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success.  Any help will be greatly appreciated
    This question was solved.
    View Solution.

    Here is the link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

  • Sat Pro 6000: Unknown Base System-device Windows XP Prof. v.2002 SP1

    Where can I find a diver for an unknown Base System-device?

    Hi
    All neccassery Toshiba drivers you can find on the official Toshiba site:
    Check this link:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Bye

  • Missing driver for "Base System Device"

    Hi,
    I have a N200 (0769) with WIN7 (32 bit).
    In the Device manager I have two "other devices" with missing drivers named "Base System Device".
    I could'n find any of that.
    I try looking for the Hardwar IDs:
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA&REV_0A
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA
    PCI\VEN_1180&DEV_0592&CC_088000
    PCI\VEN_1180&DEV_0592&CC_0880
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA&REV_01
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA
    PCI\VEN_1180&DEV_0843&CC_088000
    PCI\VEN_1180&DEV_0843&CC_0880
    But with no success.
    Any help where can I find that?
    Thanks in advance
    Solved!
    Go to Solution.

    hi nadne,
      Welcome to Lenovo Community Forums!
    Can you try installing this driver
    Ricoh Multi Card Reader Driver
    7kss73ww.exe
    3.25 MB
    Hope this helps,
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Missing drivers after fresh installation of window 7 the base system device missing.

    missing driver on  HP pavilion dv4 the base system device drive,as a result of these i cant access sound on system.

    Hi:
    The base system device is most likely your card reader.
    Missing audio is related to something else.
    On the bottom of your PC on the sticker with the serial number, please post your p/n.
    That will identify the specific model of your dv4 and I can send you the link to the drivers.
    The p/n should be arranged similar to this:  AF846AW#ABA
    Paul

  • Missing Base System Device Driver for Elitebook 8440p

    Missing Base System Device Driver for Elitebook 8440p

    Hi Doctorsherif,
    I am sorry, but to get your issue more exposure I would suggest posting it in the Commercial Forums since this is a commercial product or Business product. You can do this at
    http://h30499.www3.hp.com/hpeb/
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Satellite A10: 'base system device' after HDD reinstallation

    I have formatted my laptop's hard drive (Toshiba Satellite A10) and downloaded the necessary drivers from Toshiba Europe web site. Everything worked out fine. Then I decided to upgrade my network adapter driver (wrong decision) and it slowed down considerably the system.
    Believing that I was holding the solution in my hands I formatted again HDD and when it came to reinstalling the drivers everything loaded ok except one:
    BASE SYSTEM DEVICE
    Please let me know how to resolve this issue.

    Did you install the chipset utility?
    If not, do that firstly before installing any further Toshiba tools and drivers.
    i recommend you to use the Toshiba Recovery CD.
    Please check also this useful Intel article:
    http://www.intel.com/support/motherboards/server/S5000VSA/sb/CS-022703.htm

  • ThinkPad W530 - 2447 3U2 - Base System Device unknown

    Hi guys, I tried to install a fresh copy of Windows Enterprise 7 64 bits, in my new laptop. I reinstall all drivers recommended in lenovo support (all) but in device manager window continues with yellow Base System Device message.
    These are the list of drivers installed:
    6hgx75ww.exe, 79oi30ww.exe, g1a133ww_w78.exe, g1ic09ww.exe, g1im15ww.exe, g1io15ww.exe, g1ir15ww.exe, g1ku20ww.exe, g1ra15ww.exe, g1rf42ww.exe, g1rg14ww.exe, g1rw10ww_64.exe, g1ss01ww.exe, g1w216ww_s64.exe, g1xv51ww.exe, g1ys12ww.exe, g4wb11ww.exe, g5de36ww.exe, geku18ww.exe, gfvv03ww.exe, hfu406ww.exe, os7021ww_64.exe, os7025ww_64.exe, osfj08ww.exe, osfq03ww.exe
    The last driver was 8ass82ww.exe and the problem persist.
    I need your help. Thanks
    Solved!
    Go to Solution.

    Guys, sorry for the little post. Here the complete:
    With this driver update:
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
    I installed and all devices were recognized.
    Thanks you very much

  • Windows 7 RC - Portege M200 - Base System Device

    Windows 7 RC is running nicely on my M200 but the Device Manager is showing an 'Other Device' with no driver loaded. It is described as 'Base System Device' and Properties shows its location as 'PCI Bus 2, Device 13, Function 0'.
    I have tried on-line searches and browsing within my M200 for a driver with no success. I have read elsewhere in these forums that the 'Base System Device' could be tied up with the SD Utilities. I have downloaded a fresh copy of the SD Utilities and installed them but still no luck. Certainly the SD Format utility won't work - it does not recognise when an SD card in inserted - so may be the SD Utilities need revision for Windows 7.
    Not a major problem as I can format SD cards elsewhere but it would be nice to get a clean bill of health from Device Manager.
    Has anyone else run into this problem and, even better, found a solution?
    Keith Woolf

    Some progress! I have checked out the IR device; it has a 'later' driver installed than the one listed on the laptopvideo2go website so I have left it alone. It report 'working OK' although I have no means of checking it.
    I found the VENdor and DEVice numbers under Base System Device\Properties\Details\Hardware Ids; they are VEN 1179 and DEV 0805. The 'pcidatabase' decodes these as VENdor Toshiba America Info Systems and DEVice SD Card Controller.
    This seems to confirm that, as I guessed from a thread on another forum, it is the SD Card Controller that lacks a driver and that it is 'Toshiba' who - we hope - will come up with an updated driver 'in due course'.
    Thanks very much for your help; I have learned how to identify PCI problems and have bookmarked the M200 Impressions site - very interesting and I shall keep an eye on your work.
    Thanks again, all.

  • What is 'Base System Device'?

    After working with my laptop for over two years, i encounter more and more problems but the weirdest thing is that suddenly it tells me that it found a new hardware called base system device, which should be installed.
    I have no clue what that is, where to find the software or whether I need to install it at all. Can somebody please give me some advice here?
    Thanks.

    Hi
    Firstly could you please post you notebook name?
    Secondly: did you install the OS from the Toshiba recovery CD?
    This image contains whole drivers and necessary tools and after the installation of the OS from the recovery CD no unknown device should appears in device manager
    PS: Base system device is usually the SD Card Controller.

  • Missing base system device on HP Pavilian dv7-1285dx - Windows7

    Getting the followin errors:
    Other devices
       Base System Device
       Base System Device
       Base System Device
       Unknown Device
    This question was solved.
    View Solution.

    32 or 64 bit?
    These are likely the HP Quicklaunch and the Card reader driver. 
    Here is the full download page for 64 bit:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3860​...

  • Missing base system device

    My device does not have  base system device.

    Hi:
    You need this driver...
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3357379&swItemId=ob_76430_3&swEnvOid=4053

  • Missing Base system device elitebook

    Hi
    My laptop reports that i'm missing the Base system device.
    Hp elitbook 2560p
    Hardware id's
    PCI\VEN_197B&DEV_2392&SUBSYS_162B103C&REV_30
    PCI\VEN_197B&DEV_2392&SUBSYS_162B103C
    PCI\VEN_197B&DEV_2392&CC_088000
    PCI\VEN_197B&DEV_2392&CC_0880
    I can't find the right drivers.
    Can somebody help me with this problem?
    This question was solved.
    View Solution.

    Hi,
    Install the card reader driver on the relevant link below.
    Card Reader Driver - Windows 8.1
    Card Reader Driver - Windows 8, XP, Vista, Windows 7
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Base system device driver

    After rebuilding my Elitebook 8540pI have 2 Driver errors Both called base system devices,  How do I identify the devices to get the drivers? I have already reloaded the Chipset drivers and did the troubleshooting search to auto find the drivers without success.  Thanks in advance for any help.
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the driver you need for the card reader.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=4096169&sp​...

  • Missing base system device for Pavillion dv6700

    I have an HP Pavillion dv6700. P/N Kc317uA#ABA
    I am missing base system devices:
    PCI bus 2, devise 5, function 2 (code 28)
    PCI bus 2, device 5, function 4 (code 1)
    This happened after I had to restore a restore a set point.
    Thanks

    Hi:
    You need this driver for the base system devices (card reader).
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55777-1&cc=us&dlc=en&lc=en&...

Maybe you are looking for

  • Problem in calling nested stored procedure

    Hi, I am using execute(), getMoreResults() and getResultSet() methods to call sybase stored proc. It is working fine when calling a simple stored proc. But it is giving following error when this stored proc calls another stored proc inside it. << Err

  • After uninstalling internet explorer, how do I get hyperlinks in Outlook to open

    Yesterday, I uninstalled Internet Explorer in an effort to free up some hard drive space. Monzilla Firefox is my default browzer and works fine. After IE was uninstalled (using the control panel feature) hyperlinks in my Outlook email fail to open. W

  • Local html in a folio?

    I tried to add some local html content in a folio, when I want to activate the content on the iPad it comes up with "can´t find the server" But it shouldn't be nessacary when all of the content was included in same folder as the rest of the content?

  • Cannot import classes such as ObjectFile, Scene, ...

    Hi Java'ers, I wanted to load some ObjectFile into my Java program but I have no idea what's wrong about my method. I need do this so I can load an objectfile (.obj) into my program: import com.sun.j3d.loaders.objectfile.ObjectFile; Eclipse says that

  • Multiple vs one schema in a Forms context

    Hello, I was asked a question relating to a Forms application architected as follows: The main application is comprised of 10 sub-systems. Each system is related to a schema with a given owner. However, there are a number of grants that are required