Base table not found
CF5 Newbie needs help.
I am trying to create a webpage with a searchable access
database that displays photos.
I am getting the message ODBC Error Code = S0002 (Base table
not found). I have verified my database.
Maybe there is a problem with one of my initial files. I have
the search, results and details querry set up am I missing an
additional file here that would cause this problem?
Thanks -any help is greatly appreciated,
Jen
Hi,
pPerhaps one should explain some basics about privileges in the database.
You connected as sysdba, named superdba.
The table(s) you are looking for have been created by the user SAPAJ4DB.
If a user creates a table, noone !!, really noone is allowed to select them except this owner.
Not even the sysdba is allowed to select them.
And it is good that it is like this. I personally do have some private info in tables and do NOT
want to let them being seen by my boss being the sysdba of the db.
If the owner wants to allow access to this table, he has to grant privileges to other users.
There are select, insert, update, delete ( to name the DML-privileges ).
If the owner of the table you are looking for, did not do this, the sysdba is not allow to see them.
And then he will receive the error -4004.
Yes, the table DOES exist. But for the user not having a privileges for this table,
this table looks like not existing, causing this error to occur.
Therefore: connect as the owner, select there what you want.
And then think about your needs and grant the corresponding privileges to other users / the sysdba.
Have a nice weekend,
Elke
Similar Messages
-
Dump : Table not found in oracle database
Hi,
I am doing a program regarding analysis of tables belonging to archiving objects.In my program i am calling a RFC function module . 'DB02_ORA_TABLE_INDEX_ANALYSIS . But it is giving the dump for native sql statement .
--- Oracle block size ----------------------------------------------
exec sql.
select value from v$parameter where name like 'db_block_size%'
into :block_size
endexec.
Dump is table not found in database.
Could please let me know what setting i am missing...
Thanks in advance.....
SudhakarHi,
the view V$PARAMETER must be accessed through SAP/Oracle Database Monitor lets you view the active Oracle database parameters and the contents of the init.ora file.
Alternatively, you can use transaction st04. You need to apply SAP Note 706927 before using the database monitor.
Hope this information is help to you.
Regards,
José -
Table not found error while importing table defintion in PI 7.1?
Hi Guys,
I am trying to import the table structure from DB2 as an external defintion but i am getting the error table not found.
There are no connection issues with the DB2 and CC is good. Are there any additional settings i need to perform to import the table?
any help or suggestions would be really appreciated
Thanks,
SriniHi Srinivas,
I think you want to do JDBC lookup.. you must have created the JDBC receiver communication channel. As your communication channel is correct and still you are getting Table not found error.. Check following steps.
- Check that your Communication channel is activated and working fine.
- Check that the ID which you are using in JDBC receiver is having proper authorization to import the table definition.
Just check with all authorization.
I think the problem is with insufficient authorization to User ID used on JDBC communication channel.
Thanks,
Bhupesh. -
Getting idoc error - Entry in outbound table not found- in outbound scenari
hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problemHi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas. -
"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16
While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple -
Viewing form in Preview Mode Failed. Error: Table not found [131-183]
Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
Johnhi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q -
Hi Guys,
Error - TABLLE NOT FOUND
We are working on discovery server which comes preconfigured from SAP.
I am able to work on the standard repositories like products available on this server for syndication and importing, but when I am trying to create the new repository I am getting the error TABLE NOT FOUND. Getting this error after entering the DBMS Server, Login Details and Repository Name and Port details.
Thanks,
MSHi colleagues
You should check follow:
- DBMS-user can connect to DBMS from your workstation(where you run SAP MDM Console)
- DBMS-user has premissions(grants) according to "installation guide".
- restart SAP MDM Server
- update DBMS Settings
- create new repository
Regards
Kanstantsin -
Entry in outbound table not found
i am using we19 trying to do standard outbound processing for idoc mbgmcr02
i use receiver Port internal and partner abc01
sender Port -
and partner abc02
in we20 is set up partner
abc01 type ls in outbound parameter area i see mbgmcr
now in 19 when is use as receiver partner abc01 i get the following error
entry in outbound table not found
/abc01/ls//mbgmcr message no 400 id E0
can anyone direct me to what i am doing wrong?????????????????/Hi Janice,
See these..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/71/9bbdde2f66454bb9771170369bae81/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2d/f371e4d24a11d289810000e8216438/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b80c243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/f0/08ef0d06b111d286e2080009b98822/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
cheers,
Prashanth -
Entry in inbound table not found
There is a typical problem here. R3 is recieving IDOCs from other (SRM) systems.
But the sender's(SRM) partner name is not there in R3. The present IDOCs are getting failed with status 56 and message " Entry in inbound table not found" Please help me out..Sending partner (number) is not there...so U cannot have partner profile..
-
Entry in outbound table not found, Error message no. EO400
I have created Partner profile and include message in partner profile. when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
Please suggest me solution for the same.
Kunjan shahHi Kundan,
can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
Regards,
nagaraj -
Entry in outbound table not found E0 400
Hi all,
Can anyone please help me with the below error which i am facing in ALE IDOCS.
status 29: Entry in outbound table not found E0 400
I am unable to see my port name in the created IDOC and the basic type is incorrectly called.
may I know what settings need to be verified.
Thanks in advance.SAP checks the IDoc control record for outbound IDoc against EDP13 (outbound partner profile table). EDP13 is updated when you create outbound partner profile parameter in WE20
Check if you have created the partner profile outbound parameter in WE20 correctly to match your outbound IDoc control record.
SAP checks partner number, port, partner function of the receiver along with message type, message code and message function. They all should match between WE20 outbound partner profile parameter for your message type and the IDoc control record (EDIDC) segment.
This is the SAP code that throws the error message you mentioned
read table q_edidc index 1.
select single * from edp13
where rcvprn eq q_edidc-rcvprn
and rcvprt eq q_edidc-rcvprt
and rcvpfc eq q_edidc-rcvpfc
and mestyp eq q_edidc-mestyp
and mescod eq q_edidc-mescod
and mesfct eq q_edidc-mesfct
and test eq q_edidc-test.
if sy-subrc ne 0.
concatenate q_edidc-rcvprn '/' q_edidc-rcvprt '/' q_edidc-rcvpfc '/'
q_edidc-mestyp '/' q_edidc-mescod '/' q_edidc-mesfct '/'
q_edidc-test into text.
condense text no-gaps.
message a400(E0) with text(50).
endif. -
Entry in outbound table not found in PFAC
Good day all.
I'm facing an error "Entry in outbound table not found" when I try to create assignment PFAC (Responsibility Rules).
Any body have an answer to solve this issue?Are you trying to do something related to IDOC/Partner profile related responsibilities?.
-
IDOC Error - Entry in outbound table not found - Status 37
Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
MichaelHi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika -
IDOC error : Entry in inbound table not found
Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
<b>"Entry in inbound table not found..."</b>
<b>in diagnosis:
Noinbound partner profile could be found with the following key:
/XXXHUB/LS/LS/FIDCC2//// ..</b>
but:
I maintianed XXXHUB in logical system ( tcodeSALE ) and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks.... -
Status 29: Error in ALE service : Entry in outbound table not found
IDoc: 0000000003560240 Status 29: Error in ALE service
Entry in outbound table not found
No partner profile (outbound parameter) could be found using the following key:
/0000000000/LS//YHROT_XXM_IN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Procedure
Please check the EDI partner profiles.
But The IDOC befor this and after this is successfully run.
And even after reprocessing also it is giving same error.
After checking Contorl record, we found that there is no data in receipant Info in Partner Tab.
What would be the issue.
Please suggest.
Thanks & Regards,
MonikaHi ,
Thanks for your reply.
We are using one custom message type.
I would like to give you example of exact scenario.
Suppose my IDOC has large amount of segments then ,
It is dividing as
1st IDOC : Control record ....header and data segments
2nd IDOC : only data segment
3rd IDOc : only data segment
4th IDOC : data segment and Trailer.
In this way, I am getting all my 4 IDOCs in error.
What should be d reason?
your help will be grateful.
Hi Everyone,
any update?
Edited by: Monika.Dhumal on Feb 14, 2012 11:49 AM
Maybe you are looking for
-
I just installed the Lion operating system, basically to upgrade my iPhone. I didn't realize that my Microsoft Office 2004 application would no longer work. I have been using Word for my writing and I receive most of my emails with Word attachments.
-
How do i open a cs6 file in cs5
how do i open a cs6 file in cs5
-
Hello, I have one scenario File Sender Adapter sends file to IDOC Adapter for posting of measurement documents. After posting I need to send back status (success/failure) of measurement documents back to SAP XI. How can it be done. Can it be done thr
-
One producer two consumer loops, dequeue same element in both consumers
Hi! What is the best way for the following: I enqueu data in my producer loop. I need this data dequeue-d in both of my consumer loops, but I want to dequeu the same element in both loops. Of course if I put dequeues in both loop, then the second con
-
Oracle Universal Installer Error when Installing Oracle database Software
Hi Guru's we are installing SAP ECC 6.0 on Linux:Oracle, we start the installation fine until we reach the oracle software installation step. we login as ora<sid> then set the DISPLAY variable setenv DISPLAY 192.168.1.155:0.0 The csh shell is the one