Base tables for aggragates and Multiproviders

Is  RSDICMULTIIOBJ the base table for Multiproviders?
What is the base table for Aggragates and units?

Multiproviders
RSDCUBEMULTI 
RSDICMULTIIOBJ
Aggregates
RSDDAGGREF
RSDDAGGRT
RSDDCVERREPAGGR
RSDDAGGR    
RSDDAGGRCOMP
RSDDAGGRDIR 
RSDDAGGRDIR_M

Similar Messages

  • Taking long time filling the setup tables for sales and shipment

    Hi ,
    I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
    It took 16 hours just to bring 6 months of  sales history  data in the test environment .
    Cn anybody help on this issue why it is taking that much of time ...
    I am trying to  load the sales data from R/3 into APO-BW from 2005 to 2007 .......
    It is taking 16 hours to fill the data for only 6 months .

    Hi,
    1. delete data and refill the setuptables again by spliting to several small pieces.
    2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
    you need to check with PSA and base tables.
    keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
    correct if i'm wrong.
    either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
    User exit not a good solution. it's one possibility.
    ****Assign Points If Helpful****
    Regards,
    Ravikanth

  • What are the Target Base Tables for FA_TAX_INTERFACE table?

    Hi,
    We are using "upload tax book interface" program to update the Tax Book informaiton.
    For this we wanted to know all the Target Base Tables for FA_TAX_INTERFACE table (Specially for the ATTRIBUTE1-ATTRIBUTE15 columns of the interface table).
    Kindly request you to help on this.
    Thanks & Regards,
    Satvik Patel

    Well, what are you reconciling to? You are looking at something that seems to be different from your data extract, so what is that thing? My trouble shooting process is to take an asset that seems to be wrong and reconcile from the report/screen data to the extract data. You have to figure out what Oracle program is involved and what kind of SQL that the program is doing and what tables it is looking at. This could be an Oracle program error. I just ran into a problem on the Payables Posted Invoice Register report, where the total did not match my extract total. Turns out the report was wrong. If I had table records with a date/time stamp value (instead of just a date stamp value) in the accounting date field for the TO ACCOUNTING DATE value in my report request selection, those records were being dropped from the report. I reported this to Oracle support and found out that there is a patch to fix the problem (happens when cancelling an invoice) and a data script to follow to fix the historical data. So you have to keep an open mind. Yes, trying to find a reconciling issue can be very painful.
    My reaction is that you are looking at the right tables. There is also a FA_DISTRIBUTION_HISTORY table that you may want to look into, that links back to the FA_DEPRN_DETAIL table. Maybe your issue lies there. At least something to look at.
    John Dickey

  • Finding base table for a field in a structure !! urgent

    i need to find out where is BUDAT field being populated in the 2lis_04_p_arbpl extractor. When i see where this field is coming from it shows MCAFVG which is a structure. i need to use this field in user exit and need to know which table is it coming from. I am actually looking for last confirmation date on an order.
    my query is that if a field is shown as a part of a structure then how can we find out where is it being populated from ? like where can we find the base tables for this structure ?
    Please help. Points will be assigned to all helpful answers.
    thanks
    Laura.

    HI..
    well yes... go to ROOSOURCE and find the name of the program for that structure. go to se38 and check out the tables used in that program.
    let me know if that helped... what structure are u trying to find the tables for ?
    thanks
    Laura.

  • Base table for 0CRM_SALES_CONTR_I(CRM Sales Contracts: Item)

    Hi experts,
    Im looking for the base tables for 0CRM_SALES_CONTR_I(CRM Sales Contracts: Item).if there is a base table for the datasource how do we find it.
    Thanks,
    sivarama landa

    Hello Siva,
    This is the way to find in the system:
    From RSA2>Extraction Tab-> Extract Structure-->Components Tab->Component Column( You will see .INCLUDE)  with its Corresponding Description in the column---> Short Description ( FOR EX : ORDERADM_H Data for BW DataSources), usually the CRM system table will be CRMD_******** or CRM_******.
    Here you will not find the lbwe( way to find tables in the ECC ).
    The Best and easiest way to find is as said by Martin.
    Regards,
    Adhvi

  • Base table for 0CRM_OPPT_H

    Hi,
    can any one help me,
    What are the base tables for the data source 0CRM_OPPT_H, precisely, when i run the extractor where the fields MKT_ELEMENT (Marketing Plan Element) and OBJECT_ID (Transaction No.) are fetched from?
    In the SAP Library table of origin has been written DOC_FLOW and ORDERADM_H, but when i checked in DDIC DOC_FLOW does not exist and ORDERADM_H is a structure.
    Please let me know how the above fields will be populated, while extractor runs.
    Thanks
    Dasari

    Hi
    If I got your question properly the MKT_ELEMENT is fetched from Table ORDERADM_H with Filed ORDERADM_H_GUID and also DOC_FLOW Table with Field OBJKEY_A.
    http://help.sap.com/saphelp_nw70/helpdata/EN/39/a5252db1142c4188bbde476a39c723/frameset.htm

  • Base tables for 3FI_SL_WD_TT.

    Hi ,
    I had a query regarding the data source : 3FI_SL_WD_TT.
    The data for this DS is extracted via a function module G_BIW_GET_TT_DATA. I was able to find the base tables for the enhanced fields. I need to know how can I find the base tables for the standard fields.
    Regards,
    Adarsh

    Hi Adarsh,
    in R/3 goto transaction GCL3 "Display FI-SL Customizing Ledger".
    Find the line for your special ledger WD and what you see in the column named table should be the main table for your standard fields.
    The structure of the table is different to the datasource and also the key might be coded. Once you found the table for WD (above) have a look for further tables of similar name and you will find the tables that hold the key (like ROBJNR, COBJNR or SOBJNR) referencing to your table.
    Best,
    Ralf

  • Base tables for datasource 1cl_obat001 ?

    hi all ,
    how to know the base tables for   datasource 1cl_obat001 ?
    Thanks

    HI ,
    Ok fine , its a classification datasource , its is generated one ,you can find the details in the table CLBW_SOURCES
    in your source system (ECC ) ,
    Provide the datasource name in the infosource field , and the field OBTAB shows the source table for the extractor
    Hope its clear,
    Regards,
    Sathya

  • Need to know the base tables for the QM datasources

    Hello SAP Experts,
    I want to know the base tables for the below mentioned datasources which stores the transaction data.
    1. 2LIS_05_QE1:  Inspection Characterstics Results
    2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
    3. 2LIS_05_QVUDN: Usage decision for Inspection
    Need your inputs.
    Thanks,
    Lasya.
    Edited by: lasya john on Dec 10, 2008 8:28 PM

    Hi Lasya,
    You can use help.sap.com for this.
    If you do not find this data source there...then
    You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
    Click on that ...and go inside it in the display mode.
    Here you can see a generic pool of fields on the left side which can be included in the data source........  field present in the data sources in the right side of the pool.
    For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
    So the field is being from that particular table.
    Even I would the same thing to reply to your thread.
    You can follow the same procedure to find the table for any LO data source.
    This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
    Hope it helps.
    Thanks
    Ajeet

  • Require Project Management Base tables names , reports and Interfaces

    Hi Group ,
    This is azamtulla Khan ,I am new to oracle projects and i dont have idea on it.I dont know its shotname also .
    If any body send base tables name , reports and Interfaces for the same it will be grate to me.
    Thanks in Advance.

    Azamtulla,
    I recommend you look at the Applications Documentation (http://www.oracle.com/technology/documentation/applications.html) web site. Just pick your Applications (EBS) version and scroll til you find the Projects Resource Management link. Another option would be to visit the Oracle ETRM web site (http://etrm.oracle.com/pls/etrm/etrm_search.search).
    Hope this helps.
    Craig...
    If a response is helpful or correct, please mark it accordingly

  • Table for Customer and vendor open balance on a key date

    Dear All,
    Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
    I have checked with the below table :
    Customer-KNC1, KNC3,BSID, BSAD
    Vendor-LFC1, LFC3, BSIK, BSAK.
    But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
    Plesae let me know, how to go for it.
    Please suggest.

    Hi
    Use BSID and BSIK for open items
    And pass company code, year and from date and to date range in Posting date selection option
    Reg
    Vishnu

  • Need table for customer and vendor carry forward balance

    Hi,
    I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
    I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
    Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
    Thanks in advance.
    Regards,
    Swati

    Hi Gurus
    The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
    Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
    and my 2nd query is how to get these opening balance in Z report, at Header Level.
    Thanks and Regards
    Dnyanesh

  • How to find R/3 table  for FI and PS Datasources

    Hi,
    Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
    Thanks
    Shanthi

    Hi,
    To find DS assigned to a table.
    How to find the Datasources for the given table names ?
    How to find the Datasources for the given table names ?
    To find Tables assigned to a DS.
    USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
    switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
    retrieve data and present it to you.
    Note: Set the break point in the Extractor Function module.
    View the ST05 Extended Trace list. The Object name shows the Tables accessed.
    Thanks,
    JituK

  • Source tables for forms and tabular forms must have a primary key.

    Why does HTML DB 2.0 return the message
    "Source tables for forms and tabular forms must have a primary key."
    when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
    It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
    bw - Christian

    Christian,
    In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
    Regards,
    Marc

  • Base table for customer in R12

    Hi,
    What is the name of base table for customer in R12?
    Thanks,
    GSM

    I have one small question regarding How can we delete a Concurrent Program which is already registered? Please see this thread.
    How to delete an executable concurrent program
    How to delete an executable concurrent program
    Thanks,
    Hussein

Maybe you are looking for