Base tables for datasource 1cl_obat001 ?

hi all ,
how to know the base tables for datasource 1cl_obat001 ?
Thanks

HI ,
Ok fine , its a classification datasource , its is generated one ,you can find the details in the table CLBW_SOURCES
in your source system (ECC ) ,
Provide the datasource name in the infosource field , and the field OBTAB shows the source table for the extractor
Hope its clear,
Regards,
Sathya

Similar Messages

Need to know the base tables for the QM datasources

Hello SAP Experts,
I want to know the base tables for the below mentioned datasources which stores the transaction data.
1. 2LIS_05_QE1: Inspection Characterstics Results
2. 2LIS_05_QE2: Inspection Characterstics Results (Quan)
3. 2LIS_05_QVUDN: Usage decision for Inspection
Need your inputs.
Thanks,
Lasya.
Edited by: lasya john on Dec 10, 2008 8:28 PM

Hi Lasya,
You can use help.sap.com for this.
If you do not find this data source there...then
You can go to LBWE t-code in R/3 and then infront of the data source...you have maintenance option.
Click on that ...and go inside it in the display mode.
Here you can see a generic pool of fields on the left side which can be included in the data source........ field present in the data sources in the right side of the pool.
For every field you have a tructure name infront of it like MCXXXX where XXXX is the table name.
So the field is being from that particular table.
Even I would the same thing to reply to your thread.
You can follow the same procedure to find the table for any LO data source.
This is accurate in 99% cases...only in very few cases like purchasing...we get one or two fields from different tables.
Hope it helps.
Thanks
Ajeet

Base table for 0CRM_SALES_CONTR_I(CRM Sales Contracts: Item)

Hi experts,
Im looking for the base tables for 0CRM_SALES_CONTR_I(CRM Sales Contracts: Item).if there is a base table for the datasource how do we find it.
Thanks,
sivarama landa

Hello Siva,
This is the way to find in the system:
From RSA2>Extraction Tab-> Extract Structure-->Components Tab->Component Column( You will see .INCLUDE) with its Corresponding Description in the column---> Short Description ( FOR EX : ORDERADM_H Data for BW DataSources), usually the CRM system table will be CRMD_******** or CRM_******.
Here you will not find the lbwe( way to find tables in the ECC ).
The Best and easiest way to find is as said by Martin.
Regards,
Adhvi

Base tables for 3FI_SL_WD_TT.

Hi ,
I had a query regarding the data source : 3FI_SL_WD_TT.
The data for this DS is extracted via a function module G_BIW_GET_TT_DATA. I was able to find the base tables for the enhanced fields. I need to know how can I find the base tables for the standard fields.
Regards,
Adarsh

Hi Adarsh,
in R/3 goto transaction GCL3 "Display FI-SL Customizing Ledger".
Find the line for your special ledger WD and what you see in the column named table should be the main table for your standard fields.
The structure of the table is different to the datasource and also the key might be coded. Once you found the table for WD (above) have a look for further tables of similar name and you will find the tables that hold the key (like ROBJNR, COBJNR or SOBJNR) referencing to your table.
Best,
Ralf

Base table for customer in R12

Hi,
What is the name of base table for customer in R12?
Thanks,
GSM

I have one small question regarding How can we delete a Concurrent Program which is already registered? Please see this thread.
How to delete an executable concurrent program
How to delete an executable concurrent program
Thanks,
Hussein

What are the Target Base Tables for FA_TAX_INTERFACE table?

Hi,
We are using "upload tax book interface" program to update the Tax Book informaiton.
For this we wanted to know all the Target Base Tables for FA_TAX_INTERFACE table (Specially for the ATTRIBUTE1-ATTRIBUTE15 columns of the interface table).
Kindly request you to help on this.
Thanks & Regards,
Satvik Patel

Well, what are you reconciling to? You are looking at something that seems to be different from your data extract, so what is that thing? My trouble shooting process is to take an asset that seems to be wrong and reconcile from the report/screen data to the extract data. You have to figure out what Oracle program is involved and what kind of SQL that the program is doing and what tables it is looking at. This could be an Oracle program error. I just ran into a problem on the Payables Posted Invoice Register report, where the total did not match my extract total. Turns out the report was wrong. If I had table records with a date/time stamp value (instead of just a date stamp value) in the accounting date field for the TO ACCOUNTING DATE value in my report request selection, those records were being dropped from the report. I reported this to Oracle support and found out that there is a patch to fix the problem (happens when cancelling an invoice) and a data script to follow to fix the historical data. So you have to keep an open mind. Yes, trying to find a reconciling issue can be very painful.
My reaction is that you are looking at the right tables. There is also a FA_DISTRIBUTION_HISTORY table that you may want to look into, that links back to the FA_DEPRN_DETAIL table. Maybe your issue lies there. At least something to look at.
John Dickey

Finding base table for a field in a structure !! urgent

i need to find out where is BUDAT field being populated in the 2lis_04_p_arbpl extractor. When i see where this field is coming from it shows MCAFVG which is a structure. i need to use this field in user exit and need to know which table is it coming from. I am actually looking for last confirmation date on an order.
my query is that if a field is shown as a part of a structure then how can we find out where is it being populated from ? like where can we find the base tables for this structure ?
Please help. Points will be assigned to all helpful answers.
thanks
Laura.

HI..
well yes... go to ROOSOURCE and find the name of the program for that structure. go to se38 and check out the tables used in that program.
let me know if that helped... what structure are u trying to find the tables for ?
thanks
Laura.

Base tables for aggragates and Multiproviders

Is RSDICMULTIIOBJ the base table for Multiproviders?
What is the base table for Aggragates and units?

Multiproviders
RSDCUBEMULTI
RSDICMULTIIOBJ
Aggregates
RSDDAGGREF
RSDDAGGRT
RSDDCVERREPAGGR
RSDDAGGR
RSDDAGGRCOMP
RSDDAGGRDIR
RSDDAGGRDIR_M

Base table for 0CRM_OPPT_H

Hi,
can any one help me,
What are the base tables for the data source 0CRM_OPPT_H, precisely, when i run the extractor where the fields MKT_ELEMENT (Marketing Plan Element) and OBJECT_ID (Transaction No.) are fetched from?
In the SAP Library table of origin has been written DOC_FLOW and ORDERADM_H, but when i checked in DDIC DOC_FLOW does not exist and ORDERADM_H is a structure.
Please let me know how the above fields will be populated, while extractor runs.
Thanks
Dasari

Hi
If I got your question properly the MKT_ELEMENT is fetched from Table ORDERADM_H with Filed ORDERADM_H_GUID and also DOC_FLOW Table with Field OBJKEY_A.
http://help.sap.com/saphelp_nw70/helpdata/EN/39/a5252db1142c4188bbde476a39c723/frameset.htm

Tables for Datasources

<Moderator Message: Please search the forums>
Gurus,
From where can we find what all tables a DataSources is extracting the data from. We are working with BW 3.5. I know if we look at the InfoSource we can find out the mapping fields but how do we know which table it is coming from for eg. I want to know 0PROJECT_ATTR is getting the data from which table?
Thanks & Regards,
Venkat
Edited by: Siegfried Szameitat on Jun 8, 2009 3:45 PM

check this posts, it has the answer:
tables in datasource?
hope it helps,
rgs,
Parth.

How to find data base tables for a particular trancation code

Dear All,
Is there any T.code for finding data base tables used in a particular transaction code(Eg.: MM01).
Regards,
Satyapalli

Hello Satya
There is a very useful function module available for your requirement:
<b>RS_PROGRAM_TABLES</b>
Call this function module using:
OBJECT_TYPE = 'TRAN' " transaction
OBJECT_NAME = 'VA01'
" PROGRAM -> not required
MONITOR_ACTIVATE = 'X'
The function module will list you all DB tables touched by the transaction and shows whether they are read or updated (unfortunately, on ECC 5.0 this seems to be no longer the case. All tables are displayed as READ).
Regards
Uwe

Interface and Base tables for Receiving Transaction Processor Program

Hi Everyone,
My requirement is to move data from staging table to rcv interface tables and then run Receiving transaction processor program. How will in know what interface tables i need to insert data into? and after I run the concurrent program what are the base tables that i need to check to confirm?
Please help!
Thanks
Sunny

RCV_HEADERS_INTERFACE
RCV_TRANSACTIONS_INTERFACE
If you have serial numbers or lot numbers for the receipts, then you need to insert into
RCV_SERIALS_INTERFACE
RCV_LOTS_INTERFACE
Once the transactions are processed, you will see records in
RCV_SHIPMENT_HEADERS
RCV_SHIPMENT_LINES
For details on the interface, check irep.oracle.com
See Import PO Receipts using custom conversion. for some scripts.
And see http://www.oracleug.com/tables/purchasing/rcvheadersinterface and http://www.oracleug.com/tables/purchasing/rcvtrnsactionsinterface for details on the tables.
Hope this answers your question,
Sandeep Gandhi

Tables for DataSource

Hi,
How to find the Table names for the Text DataSources (e.g. 0CUSTOMER_TEXT)?
Thanks

Hi,
goto RSO2, display the DataSource 0CUSTOMER_TEXT; you'll see that it is based upon a view BIW_KNA1T; double click on it, you see the view definition
TXTMD = KNA1-NAME1
For other datasources it is not so trivial...
- you can display the fields of the datasource in RSO2 or RSA5 or 6. double click a field; you will then see the extract structure; double click the component of the field you are searching; perform a where-used list in tables for its data element...
- when the DS is extracted via a FM you'll get a warning with the function module name; read the code of the FM...
hope this helps,
Olivier.

How to Lock a data base table for write access.

Hi All,
I have a requirement where in I have to insert a bunch of data into a standard table using some function module. I want to lock the table for the others to insert/modity the records during my insertion. Please help me provide the procedure how to lock a table for write access for others.
thanks and regards,
Naresh

Hi,
See to this link it may help you.
http://help.sap.com/saphelp_47x200/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm

Base Table for problem code in Cs_incidents_all_b

hi
in cs_incidents_all_b we have problem_code. the does not contain any data ... we have any tl table for problem code i have cssr_prob_code_mapping_detail but if i query this
SELECT dra.repair_number,
items.description item_desc,
prob.problem_code,
fndl.meaning flow_status_name,
inc.summary,
nvl(cp.instance_number,'Not availble') ib_instance_number
FROM csd_repairs dra,
csd_repair_types_tl drtt,
cs_incidents_all_b sr,
csi_item_instances cp,
fnd_lookups fndl,
csd_flow_statuses_b fsb,
mtl_system_items_kfv items,
mtl_units_of_measure_tl uom,
jtf_rs_resource_extns_tl rstl,
jtf_rs_groups_tl rgtl,
fnd_lookups plkup,
cs_incidents_all_tl inc,
cs_sr_prob_code_mapping_detail prob,
cs_incident_types_b ty
WHERE dra.repair_type_id       = drtt.repair_type_id
AND drtt.language              = userenv('LANG')
AND dra.repair_mode            = 'WIP'
AND dra.incident_id            = sr.incident_id
AND dra.CUSTOMER_PRODUCT_ID    = cp.INSTANCE_ID (+)
AND dra.flow_status_id         = fsb.flow_status_id
AND fsb.flow_status_code       = fndl.lookup_code
AND fndl.lookup_type           = 'CSD_REPAIR_FLOW_STATUS'
AND dra.inventory_item_id      = items.inventory_item_id
AND dra.unit_of_measure        = uom.uom_code
AND uom.language               = userenv('LANG')
AND dra.resource_id            = rstl.resource_id (+)
AND rstl.category (+)          = 'EMPLOYEE'
AND rstl.language (+)          = userenv('LANG')
AND dra.owning_organization_id = rgtl.group_id (+)
AND rgtl.language (+)          = userenv('LANG')
AND dra.ro_priority_code       = plkup.lookup_code(+)
AND plkup.lookup_type(+)       = 'CSD_RO_PRIORITY'
AND items.organization_id      = cs_std.get_item_valdn_orgzn_id
AND inc.incident_id            =dra.incident_id
and ty.incident_type_id=sr.incident_type_id
and prob.incident_type_id=ty.incident_type_id
AND fndl.meaning in('Open')
order by dra.repair_numbereach diffrent problem codes for same repair number here i am want records relevant to Depot Repair

In 11.5.9, the problem and resolution codes are stored in FND_LOOKUP_VALUES table with lookup type as 'REQUEST_PROBLEM_CODE' and 'REQUEST_RESOLUTION_CODE'. I'm hoping you could still use these tables to find problem codes, even if you were on 11.5.10 or R12.
Join would be something like:
WHERE fnd_lookup_values.lookup_type = 'REQUEST_PROBLEM_CODE'
AND fnd_lookup_values.problem_code = cs_incidents_all_b.problem_code
Regarding restricting the query for Depot Repair service requests, you need to restrict by the the incident_type_id for this type of SRs (like id for Depot incident type is 10003 for us).
HTH
Alka

Base tables for datasource 1cl_obat001 ?

Similar Messages

Maybe you are looking for