Base value and BED not coming in Excise Irem in MIGO

Dear all,
I created PO base value and basic Excise duty is calculating it is showing  in tax pop up menu
but it is not coming in Goods receipt (MIGO) in Excise Item Tab
Base Value and BED
Please help
Manjunath

Hi ,
I maintained Excise  Default  
Account payable BED condition type --  JM01
BED Percentage condition -
16 ( Number )
It is upgraded 4.7 t0 Ecc 6
BED Percentage condition it is given as 16 number but if i changed this, In PO tax Popup menu is not coming
I change ---JMX1   it not coming in MIGO also
I cant understand what is this 16 number   i want to known it is program or had code ......
J1ID as different percentage
Manjunath

Similar Messages

  • Excise Base value and BED is wrong in MIGO  while Depot

    we are creating the PO for Depot, Tax code is NO ED setoff means
    The BED is going to Inventory.
    material is FERT material and Plant is DEPOT. we are using the conditions here are PB00some Z conditions and the BED is calculted on the PB00Z conitions ,
    The BED and ECS and SEcess is shown in PO taxes tab correctly.
    But when i go for MIGO "Create RG23D entry" the System will shown me the Double the BED and excise Base value is only taking the PB00 value, it is not taking the PB00+Z conditions why?
    ECS and SEcess both are correct.
    Here in PO the BED is calculted on PB00+Zconditions*....
    In MIGO ....in Excise Item the BED % is showing me wrong values....It is not shwoing us the 14% correctly every time it is shown us different values
    We are maintained the J1ID correctly for these........
    After MIGO posting:
    But the BED and remaing values are correctly shown in J1IDEPOTSTCOK1 tcode.
    But when i saw the J_I1ECDHDR table the BED is Double and ECS and SECess both are correct
    Why the BED is double and Excise base value wrong in MIGO...
    Then I go for J1IG Here system is showing me Only BED i,e also wrong and it is not shwoing me ECS and SECess blank why?
    Please kindly do the needful
    Regards
    sapman man

    Please check ur setting of maintainexsice defaults.
    BED condition type should be properly maintained.
    regards,
    Sujit

  • Excise Base value and BED is wrong in MIGO and J1IG

    Hi,
    we are creating the PO for Depot, Tax code is NO ED setoff means
    The BED  is going to Inventory.
    material is FERT material and Plant is DEPOT. we are using the conditions here are PB00some Z conditions and the BED is calculted on the PB00Z conitions ,
    The BED and ECS and SEcess is shown in PO taxes tab correctly.
    But when i go for MIGO "Create RG23D entry" the System will shown me the Double the BED and excise Base value is only taking the PB00 value, it is not taking the PB00+Z conditions why?
    ECS and SEcess both are correct.
    Here in PO the BED is calculted on PB00+Zconditions*....
    In MIGO ....in Excise Item the BED % is showing me wrong values....It is not shwoing us the 14% correctly  every time it is shown us different values
    We are maintained the J1ID correctly for these........
    After MIGO posting:
    But the BED and remaing values are correctly shown in J1IDEPOTSTCOK1 tcode.
    But when i saw the J_I1ECDHDR table the BED is Double and ECS and SECess both are correct
    Why the BED is double  and Excise base value wrong in MIGO...
    Then I go for J1IG  Here system is showing me Only BED i,e also wrong and it is not shwoing me ECS and SECess blank  why?
    Please kindly do the needful
    Regards
    sapman man

    Dear,
    Use Z condition before PB00. The same should be statastical as PB00.
    Check the excise default settings as well as,
    Check the classify condition types
    regards,
    sujit

  • Key differencess bet'n Altrnative condtion base value and Alternative calcu

    Hi All
    I read many times even though I have dought in pricing where in, differentating Altrnative condtion base value and Alternative calculation type.
    I know these two are forumalas.
    I am looking for key differencess bet'n Altrnative condtion base value and Alternative calculation type
    Where & which senario I can make out  the differnces bet'n Altrnative condtion base value and Alternative calculation type.
    Please explain in details which can keep in mind for long run...
    Thanks in advance.
    Regards,
    Ramkrishna.

    Hi Rama krishna
    go thru this....u can make difference and will have idea too
    AltCty - Condition formula for alternative calculation type:
    It is again a Routine that is written by ABAP Consultant.
    It is an alternative formula for the condition type that can be used instead of standard
    formulas.
    For example, let us take the Profit Margin which can be both + / - , so here this
    routine will help us in generating the value which can be either + or -. Profit margin is
    not a condition type so it cannot be classified as +ve or -ve in the V/06.
    Ex.: 950 0 Profit Margin 11.
    So we assign 11 - Profit Margin.
    If new routines are to be defined we follow the procedure given below.
    Go to T.Code: VOFM. - Maintain Requirements & Formulas
    Click on the "Formulas" and then on the "Condition Values".
    We have a list of routines, we can ask ABAP consultant to create new routines
    based on the client requests. And we assign the application type.
    AltCBV - Alternative formula for condition base value:
    Formula for determining the condition basis as an alternative to the standard.
    It is again a Routine that is written by ABAP Consultant.
    It is used as a basis to calculate value of the condition type instead of using it from the
    "FROM" column.· Ex.: Freight - KF00.
    Freight is calculated based on weight, volume etc. and not on the base price. In pricing
    there is no entry of weight from which the value can be referred like we do for
    discounts using base price. We have to get the value from the Material master.
    In this column we can mention the value as 12 - Gross Weight or 13 - Net Weight.
    During pricing, the system will consider the value that is mentioned in this column and
    determine the freight based on this value.
    Suppose we have Net weight: 100 kgs and Gross Weight: 150 kgs. And if we mention
    13 in this column then the Freight condition KF00 will be calculated using the weight
    as 100 kgs.
    Thanks and regards
    Chandra

  • Multilevel base value and percentage

    hi,
    in AFAMS, there are columns like base value and percentage. i need to clarify the below. hope can get advice.
    1) say base value is 01 (acquisition value), year = 8 and percentage 5.
        in this case, meaning the depreciation cost is 5% out of the total acquisition value for the first 8 years?
        say acquisition value is 50,000. so 5% X 50000 for the first 8 years?
    2) mostly multilevel for reducing balance method right? straight line hardly got multilevel. correct?
    thanks
    rgds

    Hi
    1. Yes, as per your example, it will be 5% x 50,000 for first 8 yrs.
    2. This is not necessary, but most common.
    Regards
    Zubin

  • Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi.

    Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my

    Please take a look at this Apple support document to see if it help solve your issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
    Using iPhone

  • My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

    My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

    Try Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Ive downloaded photoshop on creative cloud and its not coming up in my applications and i cant find it anywhere

    Ive downloaded photoshop on creative cloud and its not coming up in my applications and i cant find it anywhere, how do i find it/uninstall it

    Please refer to:
    Re: Adobe Creative Cloud unable to find any installed applications
    Re: Installed apps not shown as installed
    Hope it helps you.
    Regards
    Rajshree

  • My macbook pro shut down unexpectedly and its not coming up.

    My macbook pro unexpectedly shut down and its not coming up. Cant seem to get it to start. What do i do pls?

    What were you doing when it crashed? Was it plugged in or running off battery? Are you currently attempting to turn it back on while connected to AC?
    Go through each step below. If no resolution is found, you need to bring your machine in for servicing. BOL:
    Troubleshooting: My computer won't turn on - Support - Apple

  • ARE-1 Excise Base Value and LOU

    Hi Friends,
    This problem is in Exports(LOU)
    1) In ARE-1, Excise base value is zero.
    BED,Ed Cess and Sec Higher Ed Cess are flowing.
    I want to know whether this should have some value or it should be Zero.
    2) For LOU, Whether we need to Create Bond?
    Please help me
    with regards

    Hi Prashanth,
    Thanks a lot...
    I have checked this,
    1035545 -Excise base amount is not updated in table J_1IEXCDTL
    it is having the Solution as Apply code corrections.
    Package name is SAPKH60009.
    in my system it is SAPKH60008.
    I think i have to upload this patch.
    Once it done..i wll get back to u.
    with regards

  • Value is not coming in excise invoice ..

    Hi .all,
    We have created one plant . For that we did STO , delivery , PGI , and billing ( commercial and excise ). But in Excise invoice , excise value is not coming ...
    Pls Advc ....

    hi,
    pls check whether u have done relevant setting for the new plant code.
    SPRO >Log general > Tax on Goods Movements > India > Basic Settings
    reg
    Deepak

  • Condition value in billing not coming properly.

    Hi All,
    We have an issue wherein the condition value in billing document is not coming properly.
    When qty is multiplied by the price the value should come as 208.04 ( 54.51 * 4 qty ), but the condition value is coming as 16.77.
    We checked but could not find any proper reason for this.
    When checked in details of condition type, we can see the Condition Origin as manually entered, but we are ot ale to trace the changes and also who entered the condition manually.
    Kindly advise on the issue as it

    Hi Mr. Satish,
    I agree with Mr. Rajesh and for your 2nd question.
    We can easily track down who entered the condition type in order
    there are two possiblities
    Either user who created the order, enter that condition type, that will not recorded in the changes so you can see the user id at header level--> on sales data page "Created by"
    If some other user come in VA02 and enter the condition type then you can see it in
    Go to Menu "Enviroment" --> Click at changes --> your document number is there --> Execute and see who entered it
    Regards
    MT

  • SSRS 2008 R2 Report parameters have default values and report not to auto run

    Hi, I am using SSRS 2008 R2 one of my requirements for a Report is all the parameters have default value and I do not want this report to auto run when users open this report. I can create a dummy hidden parameter to break the auto run for this
    report. But I am looking for solutions other than that.
    Thanks in advance..........
    Ione

    Hi lone,
    According to your description, you have a report with parameters. Now you want you report not to run automatically with your parameters default values. Right?
    In Reporting Service, if you have parameters with default values in your report, your report will always auto run with these default values. We can say these default values are used for report running initially. So for your requirement, if you really need
    to see your default value before the report running, the best workaround is set one more parameter to break the auto run like you have done. If you just want your report not to auto run, your can achieve it by removing those default values.
    Reference:
    Report Parameters (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou (Pactera)

  • Rebate agreement - cond. base value and scale base value

    Hi,
    Good day!
    I just like to ask the possible reason for the <b>cond. base value</b> and <b>scale base value</b> in rebate agreement (path: rebate payments -> verification level) to contain zero values only.
    thanks,
    nerissa

    *

  • Java Server node and dispatcher not coming up in ECC

    Hi,
    We are using ECC6.0,We have moved the node 2 to node 1, java is not coming after cluster has moved to node 1.
    We are getting the folloeing error
    #1.5 #005056B83E3D00000000001000005CCC0004AA6F7B4BAF13#1313295693490#com.sap.engine.core.configuration##com.sap.engine.core.configuration#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Error occurred: Secure Store lib Dir does not exist F:/usr/sap/ECQ/SYS/global/security/lib
    engine
    =======================================================
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist F:/usr/sap/ECQ/SYS/global/security/lib
    engine
         at com.sap.engine.core.configuration.impl0.ConfigurationManagerImpl.initInternal(ConfigurationManagerImpl.java:139)
         at com.sap.engine.core.configuration.AbstractConfigurationManagerImpl.init(AbstractConfigurationManagerImpl.java:164)
         at com.sap.engine.core.Framework.loadSingleManager(Framework.java:582)
         at com.sap.engine.core.Framework.loadManagers(Framework.java:258)
         at com.sap.engine.core.Framework.start(Framework.java:190)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.boot.FrameThread.run(FrameThread.java:61)
         at java.lang.Thread.run(Thread.java:534)
    #1.5 #005056B83E3D00000000001200005CCC0004AA6F7B4BB178#1313295693490#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Loading: ConfigurationManager returned false! #
    #1.5 #005056B83E3D00000000001400005CCC0004AA6F7B4BB2CD#1313295693490#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Kernel not loaded. System halted.#
    #1.5 #005056B83E3D00000000002100005BBC0004AA6F7DB600BF#1313295734008#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######Thread[Thread-1,5,main]##0#0#Fatal#1#/System/Server/Critical#Plain###Critical shutdown was invoked. Reason is: Error getting confirmation reply during attach to cluster.#
    Thr 24504] Sun Aug 14 04:21:43 2011
    [Thr 24504] JHVM_RegisterNatives: com.sap.bc.krn.perf.PerfTimes
    [Thr 24504] JHVM_RegisterNatives: com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 24504] JLaunchISetClusterId: set cluster id 103414950
    [Thr 23852] Sun Aug 14 04:22:14 2011
    [Thr 23852] JLaunchIExitJava: exit hook is called (rc = -334)
    [Thr 23852] **********************************************************************
    [Thr 23852] *** ERROR => The Java VM terminated with a non-zero exit code.
    [Thr 23852] *** Please see SAP Note 943602 , section 'J2EE Engine exit codes'
    [Thr 23852] *** for additional information and trouble shooting.
    [Thr 23852] **********************************************************************
    [Thr 23852] JLaunchCloseProgram: good bye (exitcode = -334)
    Please suggest me
    Vijayashree.R

    Hi,
    Are Java directories move to node 1 (i.e. Java directories are part of clustered disk or not) ?
    Thanks
    Sunny

Maybe you are looking for