Based on Characteristics, populate variants/article through custom search help

Dear Experts,
In IS-Retail, MM43 transaction, based on characteristics how to display variant number/s(matnr) through custom search help.
Regards,
Abbas.

Hi Syed,
This is possible, if you set the field attributes of the screen as given below.
Program Attirbutes:
Check the checkbox for 'Output Field'
Check the checkbox for 'Output Only'
Display Attributes:
Check the checkbox 'As label on right'
Regards
Gangadhar

Similar Messages

  • Custom search help for characteristic based variant

    Dear Experts,
    I have characteristic based variant report, my requirement is, in any  Article(matnr) related transaction( Ex: MM43, VA01..) I required custom search help based on these characteristics and i will populate article/variant. Attached report selection screen snap. This screen will come in my custom search help.
    Regards,
    Abbas.

    I have found own for my problem. I am using MAT1 standard search help and with database view.
    Regards,
    Abbas.

  • Custom search help exit through stand search help SD_MAT1

    Dear Experts,
    How to prepare custom search help through stand search help(SD_MAT1).
    My requirement: In VA01 transaction, material(matnr) search help, adding custom search help.
    Regards,
    Abbas.

    Dear Abijith,
    How to write custom search help(FM) code with parameters and how match with search help parameters in search help exit.  Please give some sudo code.
    Regards,
    Abbas.

  • Custom Search help in Record Working Time

    Hi,
    We have a requirement to add a custom field on RECORD Working Time ( ESS). This field has been added and custom search help is assigned to the data element of the field. The values in the F4 help should vary based on employees department.
    The related code for this requirement is written in the serach help exit. The F4 help is working as expected from backend ( ECC) but not in Portal (ESS).
    I have added the custom field in TCATS_SHLP_ITS. After maintaining this table all the values in F4 help are displaying , whereas it should only display the values under employees department in Record Working time.
    I understand the class cl_xss_cat_value_help_general is responsible for the search help in ESS is there any user exit or enhancement available for this class in order to control the serach values on ESS.
    Thanks in advance.
    regards,
    Pradeep

    note that search help of CAT2 and record working time are different!
    these are teh steps
    please modify the following in the table TCATS_SHLP_ITS as follows:
              1. Execute the T-Code SM31
              2. Enter the table name TCATS_SHLP_ITS.
    or check the class
    CL_XSS_CAT_VALUE_HELP_GENERAL
    or check
    CL_XSS_CAT_VALUE_HELP*
    take an example from Sap note 914125

  • Default multiple values in custom search help

    Hi All,
    I created a custom search help for the vendor. The fields in the search help are LIFNR (Vendor) and KTOKK (Account Group).
    I would like to be able to set three default values for the account group. That is, when the user clicks on the dropdown to display the search help, I would like to have three values populated in the KTOKK field. Is this possible?
    Any help would be appreciated.
    Thanks!

    Hi,
    I am not sure abt default values, but if you are using this search help in any report than you can set hot keys in your search help and using hot keys, you can set some default filter values in you report's parameter.
    you can set variant in your report where parameter is having values like :: =,<hotkey>,<sel1>,<sel2>
    here <hotkey> : wht you have assingned in search help.
           <sel1>    : one of those default values you want to display.
           <sel2>    : one of those default values you want to display for the second field.
    hope it helps,
    Regards,
    Sagar

  • I can't remove Bing. I've tried Control Panel, the article "Removing the Search Helper Extension and Bing Bar," and I have had no luck for Windows 7 and Firefox.

    I can't remove Bing. I've tried Control Panel, the article "Removing the Search Helper Extension and Bing Bar," and I have had no luck for Windows 7 and Firefox.
    I wish I could share the two screen shots I took, but this question site doesn't have the option, so I guess I'll describe where Bing is showing up.
    In the left hand of my browser, just to the right of the back and forward arrows, there is speech bubble with a black eye ball or something. I found out it's Bing-related by clicking on it. There is no option to remove it with either left or right clicking on it.
    Also, in the right hand corner of my browser, at the very end of all my tabs, there is a white rectangular box with an orange "b" and a magnifying glass symbol. It will not respond to anything I try to do to it either, but if clicked it opens a new tab with a Bing search dialogue box.
    Finally, any new tab I open automatically opens to the Bing search dialogue box (versus Google).
    I need to get specific, step-by-step instructions for removing this Bing stuff from my computer. As I said, I have already gone through all steps outlined in the article I mentioned above as well as not been able to locate Bing in my control panel.
    Please help. I'm certain others are having this same issue. I use Windows 7 and Firefox. Thanks.

    Apologies for the formatting there. No idea what went wrong...

  • Appending custom search help

    Hi,
    I have appended a custom search help to std collective search help C_SAKNR, which is assigned to data element SAKNR. The reason to append custom search help is when the user presses F4 on G/L account field on ME51N transaction, there should be another choice of selecting G/L account based on another custom field which we have added on custom data tab. The entries are maintained in custom table which is the selection method.
    To test search help , I executed the Collective search help C_SAKNR, three parameters are used, BUKRS, KTOPL, SAKNR , when I press F4 on SAKNR I can see my search coming up at the end and can select the G/L account value which we have maintained. Now when  try on ME51N screen, the additional custom search doesn't show up, the on screen field has same data element SAKNR.
    I created one structure with field SAKNR and data element SAKNR and used on custom screen, when I execute and press F4 on screen, my custom search comes up with all the std ones. Its not working on ME51n or ME21N screens, not able to figure out whats wrong.
    Please let me know your suggestions on this.
    Thanks

    Solved it myself. I appended my search help in another included collective search help .
    Thanks

  • Customized Search Help

    Dear Firends,
    In dialog program I want to create Search Help as per our needs , what is the best way to create Customized Search Help .
    Deepak

    Use fm F4IF_INT_TABLE_VALUE_REQUEST for your requirement.
    check  this code.
    DATA: progname TYPE sy-repid,
    dynnum TYPE sy-dynnr,
    dynpro_values TYPE TABLE OF dynpread,
    field_value LIKE LINE OF dynpro_values.
    data: begin of t_t001l occurs 0,
    werks type werks_d,
    lgort type lgort_d,
    end of t_t001l.
    data: v_werks type werks_d,
    V_lgort type lgort_d.
    SELECTION-SCREEN BEGIN OF BLOCK B1.
    PARAMETERS: P_PLANT LIKE MSEG-WERKS,
    P_STOLOC LIKE MSEG-LGORT.
    SELECTION-SCREEN END OF BLOCK B1.
    INITIALIZATION.
    PROGNAME = SY-REPID.
    DYNNUM = SY-DYNNR.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_STOLOC.
    CLEAR: field_value, dynpro_values. REFRESH dynpro_values.
    field_value-fieldname = 'P_PLANT'.
    APPEND field_value TO dynpro_values.
    CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
    dyname = progname
    dynumb = dynnum
    translate_to_upper = 'X'
    TABLES
    dynpfields = dynpro_values.
    READ TABLE dynpro_values INDEX 1 INTO field_value.
    select werks lgort into TABLE t_T001L from T001L where werks = field_value-fieldvalue.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    retfield = 'P_STOLOC'
    dynpprog = progname
    dynpnr = dynnum
    dynprofield = 'P_STOLOC'
    value_org = 'S'
    TABLES
    value_tab = t_T001L.
    based on one field input ur search help will be created

  • Custom search help over standard search help

    Hello all,
    i made a selection screen with some standard fields and it is shoeing F4 as well, but now problem is that now i want to display customized search help, means wants to add our data in F4, can anyone please help me?
    i m doing below code but it is showing nothing, neither standard one nor customized one.
    code:
    SELECT-OPTIONS: so_mesty FOR edidc-mestyp.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_mesty-low.
      PERFORM f4_help.
    FORM F4_HELP .
    TYPES : BEGIN OF gst_stat,
            ZZVALUE like ZCS_PARAM-ZZVALUE,
            ZZPARADES like zcs_param-ZZPARADES,
      END OF gst_stat.
      data : lt_stat TYPE TABLE OF gst_stat.
    CONSTANTS: gc_obj(7) type c value 'MMR0320',
                gc_par(6) type c value 'MTYP*'.
       refresh lt_stat.
      select zzvalue ZZPARADES from ZCS_PARAm into table lt_stat where ZZOBJECT = gc_obj and ZZPARANAME = gc_par.
      if lt_stat[] is not initial.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            RETFIELD        = 'ZZVALUE'
            DYNPPROG        = sy-repid
            DYNPNR          = sy-dynnr
            DYNPROFIELD     = 'SO_MESTY-LOW'
            VALUE_ORG       = 'S'
          TABLES
            VALUE_TAB       = lt_stat
          EXCEPTIONS
            PARAMETER_ERROR = 1
            NO_VALUES_FOUND = 2
            OTHERS          = 3.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      endif.
    ENDFORM.                    " F4_HELP
    Regards.

    Hi,
    You can try doing like:
    On At Selection Screen on value-request for Fieldname.
    First select the data from your multiple table and populate
    one final table then that final internal table needs to be passed
    in FM:
    For Eg:
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CLASCN-LOW.
    *F4 help for material classification data
      PERFORM F4_HELP_CLASIFC USING S_CLASCN-LOW.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CLASCN-HIGH.
    *F4 help for material classification data
      PERFORM F4_HELP_CLASIFC USING S_CLASCN-HIGH.
    *&      Form  F4_HELP_CLASIFC
    *       text
    *      -->P_S_CLASCN_LOW  text
    FORM F4_HELP_CLASIFC  USING    P_S_CLASCN_LOW.
    *To fetch the classification data on the sel screen
      SELECT CLINT CLASS FROM KLAH UP TO 500 ROWS
      INTO TABLE IT_KLAH.
      IF SY-SUBRC <> 0 .
        MESSAGE TEXT-006 TYPE 'E'.
      ELSE.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
    * DDIC_STRUCTURE = ' '
        RETFIELD = 'CLASS'    "Field name on which custom F4 is required
    * PVALKEY = ' '
        DYNPPROG = SY-REPID
        DYNPNR = SY-DYNNR
        DYNPROFIELD = 'p_s_clascn_low'
        VALUE_ORG = 'S'
        DISPLAY = ' '
        TABLES
        VALUE_TAB = IT_KLAH.   "Final Internal table
      ENDIF.
    ENDFORM.                    " F4_HELP_CLASIFC
    Hope it helps
    Regards
    Mansi

  • Custom search help with F4IF_INT_TABLE_VALUE_REQUEST to retrieve 2 columns

    Hi all,
    i have a problem to retrieve selected value from a custom search help. I need to retrieve 2 columns from the selected line. eg. there are A,B,C,D column in the search help. I need to get the B and D. can anyone help? Thanks

    For achieving this follow the following 4 steps:
    1. While calling F4IF_INT_TABLE_VALUE_REQUEST pass the importing paramter return_tab  to make the data selected by the user IN SELECTION screen. Remember that without this the user entry is avaliable only at START OF SELECTION.
    2. Use this value to READ TABLE your internal table to get the  value of other column.
    3. Load an internal table with values you want to assign to selection screen fields.
    4. Assign  values to the field in selection field using Fn Module: 'DYNP_VALUES_UPDATE'.
    Example:
    DATA: ......,
        lit_fields     type table of dynpread,
        ls_fields      type dynpread,
        lit_ret_tab    type table of ddshretval,
        ls_ret_tab     type ddshretval.
    . call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          retfield        = 'VARI'
          dynpprog        = sy-cprog
          dynpnr          = sy-dynnr
          dynprofield     = 'P_VARI'
          value_org       = 'S'
        tables
          value_tab       = lit_abc
          return_tab      = lit_ret_tab
        exceptions
          parameter_error = 1
          no_values_found = 2
          others          = 3.
    check sy-subrc eq 0.
    *-----get the entered value of field vari
    read table lit_ret_tab into ls_ret_tab index 1.
      lv_vari = ls_ret_tab-fieldval.
    check sy-subrc eq 0.
    *-----get value of the other column vari_d
    read table lit_abc into ls_abc with key vari = lv_vari.
      lv_vari_d = ls_abc-vari_d.
    *----- Append to an internal table with values you want to assin to selection screen fields.
    ls_fields-fieldname = 'P_VARI'.
      ls_fields-fieldvalue = lv_vari.
      append ls_fields to lit_fields.
      ls_fields-fieldname = 'P_VARI_D'.
      ls_fields-fieldvalue = lv_vari-d.
      append ls_fields to lit_fields.
    *---- Assign  values to the field in selection field
    call function 'DYNP_VALUES_UPDATE'
        exporting
          dyname               = sy-cprog
          dynumb               = sy-dynnr
        tables
          dynpfields           = lit_fields
        exceptions
          invalid_abapworkarea = 1
          invalid_dynprofield  = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription  = 6
          undefind_error       = 7
          others               = 8.

  • Custom search help in sap field in standard transactions.

    I have a requirement that I have to add a custom search help in XREF2 of bseg table either in fb02-f-43.
    For FB02.
    Display document.
    Select a Line Item.
    Go to Additional Data tab in menubar,a pop-up will come, where we will get the Reference1 fields .
    My requiremnt is to add a custom input help having 3 constant values.
    For F-43.
    Give account , date etc in first screen.
    Go to next screen give the amount.
    Go to more data will get the fields in left side-no pop-up will come.
    Help needed

    hi, Jkuma,
    we met the similar situation with you while developing a anpplication form for HR.
    our conclustions are:
    1. it's not feasible to put all the data into the form, it will make the form too big and slow, so it must be a online interactive form
    2. you may put a search field to let the user to input some kind of criteria and do the search on the r3 side and return the hit list on the form , but it's not so easy to develop a table control on the form using javascript to get the selected one.
    3. so we built a 'selection screen' , using webdynpro for abap,
    it will show up before the form, while can use ddic search help, to make the selection, then put all the selected entries into the adobe form for further processiong.
    how this is helpful hint for you.
    br.
    jun

  • Custom search help in WD for ABAP

    Hi
    I have a Text field which does not have any input help. Now I have a custom Search help object in my R/3 store. How do i use this search help object for displaying the values for this Text field. I believe there is some standard  method  available for this. Kindly help me out.
    Regards,
    <i><b>Seema</b></i>

    Context->Dictionary Search Help.

  • Standard Search Help in Custom Search Help

    I've created a Custom Search Help for Product Hierarchy. But when search help window appears, I want to put a standard search help of Product Hierarchy on Product Hierarchy field which is located on Resctricted section. Is that possible? Let me know if there's a way...
    Thank you

    hello ibnu,
    it is not possible i attach a standard search help mara
    no such feature available .

  • Custom Search Help for the field Equipment number

    Hi,
    I have enchanced sales order transaction and included a field Equipment number(EQUI-EQUNR).
    Here after pressing F4(Search help) standard search help is display.
    I have a requirement wherein, the standard search help should not appear and a customised search where a specific Equipment category type values should appear in the search help.
    Ex. Field equipment  category (EQTYP).EQUNR(Equipment Number).
    Please let me know how to work for the customised search help.

    Hi,
    You need to create a customized search help.
    [Elementary Search Help - Structure|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee38446011d189700000e8322d00/content.htm]
    [Creating Elementary Search Helps|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee5f446011d189700000e8322d00/content.htm]
    Then you need to attach the search help to the screen field..
    [Assigning Search Helps to Screen Fields|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee93446011d189700000e8322d00/content.htm]
    [Hierarchy of Search Help Call|http://help.sap.com/saphelp_nw04/helpdata/EN/0b/32e9b798da11d295b800a0c929b3c3/content.htm]
    regards
    Nitesh

  • Custom Search Help for Functional Area of Cost Centre(KS01/KS02)

    Hi,
    I need to implement a custom search help and custom enhancement for the field Functional Area in Basic Data tab of Cost Centre Create/Change(KS01/KS02) transactions. Details of the requirement are as below:
    1. There will be a custom relation for the Cost Centre category and Functional Area which was maintained thru a SAP standard table TKA05 and a custom table.
    2.When the relation to Cost Centre category and Functional Area is a one to one it exist in the TKA05 and if its one to many it will be maintained in the custom table.
    3. The requirement is when the Cost Center to Functional area is maintained in table TKA05(One to One) in this case the corresponding Functional Area needs to be populated automatically after entering the cost centre and pressing a enter key by user.
    4.When the Cost Centre Category and Functional area does not exist in table TKA05 and existing in custom table(One to Many) in this case the F4 should be enabled for user selection with the list of Functional area values corresponding to the cost centre category entered that are maintained in the custom table.
    As per the functionality provided by SAP the input help(F4) of the field Functional area in Cost Center does not have any relation with Cost Centre Category. The existing F4 is from the Value Table(TFKB) attached to the domain of FKBER.
    Please provide your valuable inputs to implement the above requirement. Your input will be rewareded.
    Thanks in advance,
    Regards,
    Prasad.

    kalyani,
    i can see your requirement in below way..
    as it just reads: you need to assign the standard cost center help to a z cost center field in component /SAPSRM/WDC_UI_DO_ACC.. which actually is fetched though the component /SAPSRM/WDC_UI_BACKEND_SH
    so, if you see the component controller of SAPSRM/WDC_UI_DO_ACC you will see the component
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH                        
    USAGE_SH_F4     /SAPSRM/WDC_UI_BACKEND_SH     INTERFACECONTROLLER
    so you can replicate the same functionality for your z field.
    but can you clarify one thing.. why are you going for this z field in place of standard field ?

Maybe you are looking for