BASED ON VALUE CLASS WILL BE PROPOSAL
HOW TO DESIGN THIS REQUIREMENT I HAVE THE DIFFERENT TEMPERS MEANS THICKNESS I MAINTAINED LOWER AND UPPER AND TARGET VALUES IF RESULTS IS COMING ABOVE TARGET VALUE SYSTEM PROPOSAL TO RELEVENT CLASS BELOW I MENTION SOME EXAMPLES
Classification
Mean Minimum Maximum
55 51 52 TH55+SE-CA
57 53 61 TH57+SE-CA
61 62 65 TH61+SE-CA
65 66 69 TH65+SE-CA
LIKE THIS IF MY RESULTS IS COMING TO 56 THEN SYSTEM SHOULD PROPOSAL TO TH57+SE-CA
Edited by: Lakshmiananda prasad on Jul 12, 2011 8:21 AM
The system doesn't propose classes or materials.
In the inspection stock posting tab, the user would regrade the material to a different material.
A material can only have one class. So you can't have a process in which the system picks a class for batch of material.
What some places do is manufacturer a generic material, and then have special designations for grades. i.e. if the generic material 51007 the various thicknesses would be 51007-TH55, 51007-57, 51007-TH61, etc...
FF
Similar Messages
-
Hello
I am learning how to create management packs with VSAE and have a question please.
When defining a Class based on LocalApplication (which I believe already has a hosting relationship with Windows Computer and therefore no need to create a hosting relationship?)
let say I define two properties one called Version and the other Vendor both based on registry values, so I include the discovery of these regsitry values in my discovery (along with the regsitry key exists to check the actual app is installed).
Now if I have a Server with only two of the above three registry items created e.g. the actual Key and Version string value but not vendor string value. Will an instance of the Class be discovered and thereby viewable in the 'discovered inventory' view?
Or do ALL properties have to be present (as defined on the class definition) for an instance of said class to be created?
Thank you
AAnotherUser__
AAnotherUser__Hello Vladimir thanks for taking the time to reply
So if I have three properties definded on my custom class, none of which are key properties and I only discover two of them (as the registry key or what ever is missing for the last property) the class should still be discovered as there are no key properties
for the custom class and therefore no key properties missing from the discovery, is that correct please?
Also I understand I have to Discover any key properties of the classes parent/s
for example
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
<Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetbiosComputerName$</Value>
</Setting>
</Settings>
I have done this, but my Class is not being discovered.
Then I saw a post which had the following, under the Class Discovery Section (along with the other properties of the class)
<Property TypeID="System!System.Entity" PropertyID="DisplayName"/>
Therefore perhaps I need to add this as a property as well as an InstanceSetting?
I am using SCOM 2007 R2 at the moment
Thanks very much
AAnotherUser__
AAnotherUser__ -
Using a List as the value class of a Map - How?
Hello,
I have a managed-property of the following type
Map<String, List<String>> myMap;How can I set the values for the List in the faces-config.xml?
I tried sth like this, but this is no valid XML according to the schema.
Any ideas?
Regards,
Jan
<managed-property>
<property-name>myMap</property-name>
<property-class>java.util.TreeMap</property-class>
<map-entries>
<key-class>java.lang.String</key-class>
<value-class>java.lang.ArrayList</value-class>
<map-entry>
<key>key1</key>
<value>
<list-entries>
<value>value1</value>
<value>value2</value>
</list-entries>
</value>
</map-entry>
</map-entries>
</managed-property>You don't need a cfloop. Try an IN(...) clause instead.
Obviously you have to validate that the #riderlist# is not empty
first or the query will error.
SELECT riderId,
SUM(IIf(month(rideDate)=1, rideDistance, 0)) AS janSum,
SUM(IIf(month(rideDate)=2, rideDistance, 0)) AS febSum,
SUM(IIf(month(rideDate)=3, rideDistance, 0)) AS marSum,
SUM(IIf(month(rideDate)=4, rideDistance, 0)) AS aprSum,
SUM(IIf(month(rideDate)=5, rideDistance, 0)) AS maySum,
SUM(IIf(month(rideDate)=6, rideDistance, 0)) AS junSum,
SUM(IIf(month(rideDate)=7, rideDistance, 0)) AS julSum,
SUM(IIf(month(rideDate)=8, rideDistance, 0)) AS augSum,
SUM(IIf(month(rideDate)=9, rideDistance, 0)) AS sepSum,
SUM(IIf(month(rideDate)=10, rideDistance, 0)) AS octSum,
SUM(IIf(month(rideDate)=11, rideDistance, 0)) AS novSum,
SUM(IIf(month(rideDate)=12, rideDistance, 0)) AS decSum
FROM mileageLog
WHERE riderId IN (<cfqueryparam value="#riderList#"
cfsqltype="the column type here" list="true"> )
AND Year(rideDate)=#useYear#
GROUP BY riderId
ORDER BY riderId -
Populate f4 values of a field based on value of other field
Hi,
I have created select options using WDR_SELECT_OPTIONS.For one of the fields ,f4 values should be based on value of another field in the screen.
How will i achceive this requirement.
I got a link about the same but that is not using WDR_SELECT_OPTIONS
http://www.sdn.sap.com/irj/scn/logon?redirect=/irj/scn/wiki?path=/display/WDABAP/Using%20Search%20help%20attachments%20for%20WebDynpro%20ABAP
I got another link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
which I am going to try
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on Jun 22, 2011 6:49 AMHi,
Using OVS you can achieve this., In OVS Event Handler read the value based on which you want to display F4 for other field and populate the values based on the first field.
this link is fine., go through this: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
hope this helps u.,
Thanks & Regards,
Kiran -
How to generate controls dynamically based on value stored in database using mvc4?
In my database, i have a field called control_ids corresponding to text box, dropdownlist, radiobuttonlist etc. My goal is to
create controls dynamically based on value of control_id-field in table. Anybody please help me how to create the controls dynamically in MVC 4 for this scenario.In your view you could do something like that:
foreach (var field in Model.FormStruture.fields)
<div class="editor-label">
<label for="@field.Name">@field.Descricao</label>
</div>
<div class="editor-field">
<input class="text-box single-line" id="@field.Name" name="@field.Name" type="text" value="@field.Valor" data-rules-required="@field.Mandatory.ToString().ToLower()" data-rule-number="@field.Tipo.Equals(SiB.OCR.Documentos.Modelo.TipofieldDocumento.Numerico).ToString().ToLower()" title="@field.Descricao" />
</div>
if (!String.IsNullOrEmpty(field.Format))
@:<script type="text/javascript">$("[email protected]").mask("@field.Format");</script> -
Calculate BED & relevant duties based on value @ PO for a particular vendor
Dear experts,
Is it possible to calculate excise duties and other relevant pricing elements at purchase order level based on VALUE and capture the same (part1 - MIGO and part11-J1IEX) for a PARTICULAR VENDOR INVOICE?
The business process is like this. First we r receiving invoice from vendor and based on that we r creating PO and do other transaction activities.
We r using ECC6.we r maintaining tax details through tax codes based on percentage and pricing procedure(TAXINJ) is activated and pricing elements are managed through cond.types(gross is value base and others are managed by %).
I find difficulty to capture excise data (cin) through % in j1iex and manual value adjustment is tedious process for multiple line items.
If it is possible, kindly suggest.
Regards,
Vimalan.This is nothing but Trading process...
u will not know what amount of excise the vendor is passing on u..
just follow the below steps
hi
create material master with HAWA material type..
maintain material chapter id combination in J1ID
create tax code with zero excise and some vat/cst in FTXP
maintain condition records for tax code in FV11
Assign tax code to company code in tax on goods movement
create PO in ME21N with the tax code created.
During MIGO change the base amount
Base amount = Base amount(PO) - Excise(bed, ecess, secess)
enter the bed ecess secess in excise item details
In excise header tab click on additional data (pencil icon) there in miscellaneous tab check mrp indicator
post the document.
in MIRO change the base amount to base amount - excise.
During Purchase the RG23 A reg will Update..
During Sales RG1 willl update.. -
Count MySQL rows based off Value in Dynamic Table
Greetings all. I have 2 MySQL tables; 1 that contains the names of my classes.(Class A, Class, B, etc.) and 1 table that contains the names of students in each Class (for example Class A: John Doe; Class A: Susie Smith.; Class B: Jane Doe). In the 2nd table the Class name is in its own column and the student's name is in a 2nd column.
I currently have a dynamic repeating table that lists the names of all of the classes from the 1st table. What I'm trying to do is add a second column to this repeating dynamic table that lists the number of students in each class. For example; Row 1 of the dynamic table would say "Class A | 5; Class B | 3; Class C | 7, etc.). The dynamic table works perfectly to list the class names. For the life of me I can't figure out how to perform a count for each class to insert in the repeating table. I will be adding more Classes which as why I'm trying to set up the counting query dynamically. So far I have only been able to figure out how to count the total rows in the 2nd table, or count the rows with a specified class name. Any advice or guidance on how to count the number of rows in the 2nd MySQL table based off the class name in the repeating table is much appreciated. Thank you for any and all help. Have a great day.Select count(*), Class from MyTable
Group by Class
Time to learn about SQL:
http://www.w3schools.com/sql/sql_intro.asp -
Billing value should not exceed contract(value based contract) value
Hi,
We are using value based contract and in item category we set E in incompletion rule which stops me to create relaease order where its value exceeds the contract value.
But via release order we recognize revenue(service based revenue recognition) and we do billing directly through contract via milestone billing plan,
At present i can bill more then my contract value.Now i want to system should not allow me to bill mre then contract value.
I checked the option in VOV8 and VOV7 but all those are meant for release order not for bliing.
Thanks in advance.Hi Satya
You can set the billing amount in milestone billing plan itself. based on that value billing will done. -
I can't figure out how to display a name of a field based on values. Here is what I have:
{SEAT_RECORD.TAX_TOTAL1}
{SEAT_RECORD.TAX_TOTAL2}
{SEAT_RECORD.TAX_TOTAL3}
{Tax.ID} - IDs are 1,2 and 3
{Tax.NAME}
I want to assign the {Tax.Name} to the the corresponding {SEAT_RECORD.TAX_TOTAL#}.
I have 3 IDs in Tax.ID (1,2,3). I want to create a text field with the appropriate tax name. {SEAT_RECORD.TAX_TOTAL1} corresponds with {Tax.ID} 1 and therefore should display {Tax.NAME} where {Tax.ID} = 1.
Same for {Tax.NAME} 2 and 3
On my Report I would like to have something like this in the footer section.
(TaxName1) {SEAT_RECORD.TAX_TOTAL1}
(TaxName2) {SEAT_RECORD.TAX_TOTAL2}
(TaxName3) {SEAT_RECORD.TAX_TOTAL3}
Do I need to create a formula or SQL expression? Any help will be appreciated.
Thanks,
-MattThat doesn't work...my footers look like this then...
Group Footer #1a: {Tax.Name} {SEAT_RECORD.TAX_TOTAL1}
Group Footer #1b: {Tax.Name} {SEAT_RECORD.TAX_TOTAL2}
Group Footer #1c: {Tax.Name} {SEAT_RECORD.TAX_TOTAL3}
and the output is pretty crazy.
I need to be able to create a variable like
Set @Tax1 as {Tax.Name} where {Tax.ID} = 1
That way I can just put the variable on a footer along with {SEAT_RECORD.TAX_TOTAL1} and get what I need.
-Matt -
Need to change LOV based on values in other Item ....
Hello All,
I got a required to show LOV based on some value in other column. Let me explain ... suppose in column A has value is A1 then column B should show A11, A12 , A13 and if Column A has value C then cloumn B should show C11, C12 ... etc. The LOV will be static with some pre defined values. So all the LOVs will be defined in forms. We just need to show based on value in column A .
Please suggest.
Thanks.
Edited by: Amit1cs on Apr 18, 2013 7:40 PMAmit1cs wrote:
Hello All,
I got a required to show LOV based on some value in other column. Let me explain ... suppose in column A has value is A1 then column B should show A11, A12 , A13 and if Column A has value C then cloumn B should show C11, C12 ... etc. The LOV will be static with some pre defined values. So all the LOVs will be defined in forms. We just need to show based on value in column A .
Please suggest.Hello Amit,
So far i understand, you can create multiple record group for a single LOV. before display the lov just change or assign the appropriate record group. You may use pre-text-item trigger at column B and set the record group to your LOV.
Hope this helps
Hamid -
Want 2 populate value in 2nd list item based on value selected in 1st list?
Want 2 populate value in 2nd list item based on value selected in 1st list?
Gaurav -
The 3rd list will not populate because nothing has been selected yet in list 2. The value in list 2 is null, so the loop to populate list (3) has nothing to load. Try the following below. This should seed your 2nd list so the 3rd list will populate.
You will have to declare first_record boolean and first_value to match DESCC.
first_record := true; -- NEW *****
Clear_List('BLOCK2.ITEM2');
FOR CurRec IN (SELECT UNIQUE DESCC DESCC FROM LUTT where LUTT.IDD = :BLOCK2.ITEM1)
LOOP
if first_record = true then -- NEW SECTION *****
first_value := CurRec.DESCC;
first_record := false;
end if;
Add_List_Element('BLOCK2.ITEM2',1,CurRec.DESCC,CurRec.DESCC);
END LOOP;
:block2.item2 := first_value; -- NEW *****
Clear_List('BLOCK2.ITEM3');
FOR CurRec2 IN (SELECT UNIQUE DESCC DESCC FROM LUTT where LUTT.DESCC = :BLOCK2.ITEM2)
LOOP
Add_List_Element('BLOCK2.ITEM3',2,CurRec2.DESCC,CurRec2.DESCC);
END LOOP;
My name is Ken, 1990 is when I started using Oracle Forms 3.0, character based in the Unix environments. And you are very welcome. -
Dynamically display title based on value selected in column selector
Hi All,
Can it be possible to show the report title dynamically based on value selected in column selector . suppose i have two column status and region . When i will select status in the column selector the title of the report will show " Status Summary" when i will select region then the title will change to "Region Summary". Please help me...Hi,
create dashboard prompt with column selector functionality like following way
write the following query in your dashboard prompt sql results
select region name from subject area name
Union all
select sub_region name from subject area name
like this and put one presentation variable for this dashboard prompt like var1
in your report write formula in your column like this *case when @{var1)='region column' then 'Region Summary' else ' ' end*
and refer this column in narrative view like @1 then narrative act like a title view.
Hope this helps you
Regards
Naresh -
How to create a new row for a VO based on values from another VO?
Hi, experts.
in jdev 11.1.2.3,
How to create a new row for VO1 based on values from another VO2 in the same page?
and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
How-to declaratively create new table rows based on existing row content (20-NOV-2008)
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
I have tried:
1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
3.add: Create insertinside Createwithparams->Nameddata(amount),
4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
<Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
java.lang.NumberFormatException: For input string: "Amount"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
Can anyone give some suggestions?
Thanks in advance.
bao
Edited by: user6715237 on 2013-4-19 下午9:29Hi,CM,
I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
My principal requirement is as follows:
1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
--so it's better to implement it in UI rather than in EO.
2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
--little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
In order to get full information for the requirements of my use case, can take a check at:
How to set default value for a VO query bind variable in a jspx page?
(the end half of the thread: I have a more realworld requirement similar to the above requirement is:
Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
Regards
bao
Edited by: user6715237 on 2013-4-19 下午11:18
JAVE->JAVA -
Copy characteristic value(class 023 ) from the material master to the batch
Dear All,
Is there a way to copy the characteristic value (class 123) from material master to the batch master automatically once we create a batch of that material
I tried to create a dependency, but didnu2019t know what to write in the dependency editor
Please adviseI dont know if its possible in standard, you can try and create a reference batch, and use the below user exit I found in SAP library :
Set Up Customer Exit for Determining Source Batch
You can use function module exit EXIT_SAPLV01Z_011 in SAP enhancement SAPLV1ZN when assigning characteristic values to batches. You use this to specify a reference batch when creating a new batch with the central function module VB_CREATE_BATCH.
Further notes
The reference batch must always be specified completely. This means the reference material, source batch and reference plant details must have been entered if the batch is determined at plant level.
All batch master data is copied. If the batch is classified in this enhancement, the values assigned to the corresponding characteristics are copied.
In the exit, you can use a communication structure with the application data for the respective business transaction (for example, plant or material type). If you require further information, you must obtain it yourself in one of the user exits (such as time, user name, or date, for example). -
F4 Help IN ALV (OOPs) based on value entered in Other colunm.
Hi,
I have developed a module pool using ALV GRID Display.
i have two fields in it. and for the second field i should provide F4 help. and the list in the f4 help should be based on the value enterd in first column.
below is my code.
MODULE BPO_100 OUTPUT.
DATA: LT_FCAT TYPE LVC_T_FCAT.
DATA: ls_fcat TYPE lvc_s_fcat.
DATA: wa type t_znout.
*DATA: it_kd1 LIKE zish_pm_cs_kd1fd OCCURS 0 WITH HEADER LINE.
SELECT * FROM zish_pm_cs_kd1fd INTO TABLE it_kd1 WHERE einri = rnpa1-einri.
IF sy-subrc = 0.
SORT it_kd1 BY sno.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_kd1 COMPARING fieldname.
LOOP AT it_kd1 into wa.
clear wa-value.
MODIFY it_kd1 FROM wa.
ENDLOOP.
ls_fcat-fieldname = 'FIELDNAME'.
ls_fcat-scrtext_l = 'Field name'.
ls_fcat-scrtext_m = 'Field name'.
ls_fcat-scrtext_s = 'Field name'.
ls_fcat-tabname = '1'.
ls_fcat-col_pos = '1'.
ls_fcat-outputlen = 15.
APPEND ls_fcat TO lt_fcat.
ls_fcat-fieldname = 'VALUE'.
ls_fcat-scrtext_l = 'Value'.
ls_fcat-scrtext_m = 'Value'.
ls_fcat-scrtext_s = 'Value'.
ls_fcat-tabname = '1'.
ls_fcat-col_pos = '2'.
ls_fcat-outputlen = 15.
ls_fcat-edit = 'X'.
ls_fcat-f4availabl = 'X'.
APPEND ls_fcat TO lt_fcat.
IF G_CUSTOM_CONTAINER1 IS INITIAL.
create a custom container control for our ALV Control
CREATE OBJECT g_custom_container1
EXPORTING
container_name = g_container1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc ne 0.
add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'ZISH_SCRN_ALV'
txt2 = sy-subrc
txt1 = 'The control could not be created'(510).
ENDIF.
create an instance of alv control
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container1.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'ZISH_PA_ZNOUT'
i_default = gs_test_1700-vari_default
i_default = 'X'
i_save = gs_test_1700-vari_save
is_variant = ls_vari
is_layout = gs_layout1
CHANGING
it_outtab = it_kd1
IT_FIELDCATALOG = LT_FCAT.
ENDIF.
ENDMODULE. " BPO_100 OUTPUT
Edited by: Guru Ram on Sep 24, 2009 8:58 AMSee sample code.
I have 2 fields MATNR and DESC in screen 100. Change it according to ur needs.
In screen flow logic,
PROCESS ON VALUE-REQUEST.
FIELD desc MODULE module_desc. " F4 for screen field DESC based on value entered in field MATNR
In report,
MODULE module_desc INPUT.
TABLES: ddshretval.
DATA: l_t_dynpread LIKE dynpread OCCURS 0 WITH HEADER LINE,
l_t_dynpread1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: l_t_retdynr TYPE TABLE OF ddshretval,
l_wa_retdynr LIKE LINE OF l_t_retdynr.
DATA: BEGIN OF g_t_desc OCCURS 0,
maktx TYPE makt-maktx,
END OF g_t_desc,
wa LIKE g_t_desc.
l_t_dynpread-fieldname = 'MATNR'. " Field1 name
APPEND l_t_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-repid
dynumb = '0100'
TABLES
dynpfields = l_t_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
invalid_parameter = 7
undefind_error = 8
double_conversion = 9
stepl_not_found = 10
OTHERS = 11.
READ TABLE l_t_dynpread INDEX 1.
IF l_t_dynpread-fieldvalue IS NOT INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT' " Converting matnr to 18 digits
EXPORTING
input = l_t_dynpread-fieldvalue
IMPORTING
output = l_t_dynpread-fieldvalue.
SELECT maktx FROM makt INTO TABLE g_t_desc WHERE matnr = l_t_dynpread-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'MAKTX'
dynpprog = sy-repid
dynpnr = sy-dynnr
value_org = 'S'
TABLES
value_tab = g_t_desc
return_tab = l_t_retdynr
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
READ TABLE l_t_retdynr INTO l_wa_retdynr INDEX 1.
IF sy-subrc = 0.
l_t_dynpread1-fieldname = l_wa_retdynr-fieldname.
l_t_dynpread1-fieldvalue = l_wa_retdynr-fieldval.
APPEND l_t_dynpread1.
l_t_dynpread1-fieldname = 'DESC'. " Field2 name
APPEND l_t_dynpread1.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = l_t_dynpread1
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDIF.
ENDIF.
ENDMODULE. " module_desc INPUT
Thanks.
Maybe you are looking for
-
Firefox 29 is no longer automatically creating bookmarks backups.
I hate to be posting another question having finally (I believe) finding a work around for the "Firefox 29 fails to exit properly and remains running in task manager" problem. https://support.mozilla.org/en-US/questions/997670 However, in Firefox 28
-
Invoice payment..
Hi all, In MIRO after posting the document message is coming, "Document no. xxxxxx created (Blocked for payment)" But our requirement is to remove the default "Block for payment" What is the necessary setting to be done to remove it. Thnks & Regards
-
Xml to Oracle (Update more than one row)
Hi, I want to update more than one row in table from .xml file. My xml file is as follows: <ROOT> <PROFILE PROFILEMASTER_PKEY="54" DB_MSTR_PKEY="2" PROFILE_NAME="Bhushans" DELIMETER="~" PRE_PROCESSOR="1" POST_PROCESSOR="10" PRE_PROCESSOR_TYPE="1" POS
-
Problems exporting to MPEG 2- "footage needs to be rendered"
Hello...I am having an issue when I try to export my project as an MPEG-2 for DVD SP. The footage appears to be already rendered, but when I go to export, I get a message that says "Not Rendered: This movie mus bve rendered before it can be encoded."
-
Family Base Not Restricting After Hours
We have Family Base installed on our phone and on our son's phone. We have night time hours set up - but Family Base is not restricting his text messages or anything. Could this be because he has Wi-fi and mobile data turned off? How is he getting ar