BaseLine date different from Terms Of Payment Date

Hi,
My client posted 3 documents dated 23.12.2009,17.12.2009,14.12.2009 respectively. The terms of payment has been set to accept document date as default for the baseline date. This means that the baseline dates for the documents should be same as 23.12.2009,17.12.2009,14.12.2009 respectively. However, the system has set 31.12.2009 as baseline dates for all MIRO documents. I have already checked Terms Of Payment ,Vendor Master and the posted documents.
Can anyone please provide any clues to this problem?
Thanks In Advance
Regards,
Payal Saxena

Hi Payal
Request you to check settings for PT in OBB8
Also, refer to this thread - Baseline date in payment terms_reply the question for FI experts
If the problem still persists, you will require a user exit.
Rgds,
Zub

Similar Messages

Order GI date different from Delivery Planned GI date

Hi Gurus, I noticed on one order-delivery that the order's GI date (in the schedule line) is different from the delivery's planned GI date. What could be the cause of that?

hello dear
System is nowhere stopping to change the planned GI date in billing. If orders schedule date is say 15.10.2007, i can change the planned GI date to 16.10.2007 and so the billing date also.
regards
Inder

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

Production finish date differs from basic finish date in backward schedulin

Hi, experts.
When i do scheduling the planned order,
production finish date differs from basic finish date in backward scheduling as below.
Scheduling: Backward
Basic finish date : 2010.01.22
Basic start date : 2010.01.21
Production finish date : 2010.01.23 09:00:00
Production start date ; 2010.01.22 03:57:09
*GR time : 0.
*Scheduling Margin key : 0.
I don't know why production finish date set in 2010.01.23 09:00. ( Basic finish date +1 day)
Please reply me.
Thanks.

Dear Jong,
1) what is the parameter used in MRP run, Basic scheduling or lead time scheduling
2) you must find a exception Mssg for that plan order in MD04
3) basic scheduling take the time from material master & lead time scheduling will take time
from Routing
Regards
Madhu

GL date different from Payment Date

Dear All,
I got problem related to Oracle Payables. I wonder how this happen. The problem appears as below:
In practices, GL Date will default to be same as Payment Date. Suddently the GL date had changed to 1st dec (which is suppose to be 4th Nov). I had checked one payments at TEST instant, GL Date & Payment Date are same (eg: Payment date=04-NOV-2008, GL Date=04-NOV-2008). However, when check the same payment at PROD instant, GL Date previously generated on 4-NOV-2008 had changed to 1st Dec 2008.
Is it possible to change back the date to the original date which is the Payment Date?
Please advices
Thank you.

Dear All,
Just to share explanation received from Metalink FYI;
A : As per standard functionality, once the transactions are sweeped to next period the date will also change to 1st day of next open period. So if the invoices for which the GL date has changed in production are the one which were found in unaccounted transaction report during period closure process, then this is intended functionality.
Q : Is it possible if we disable the function, so that the GL Date will not change to next open period when sweep activity is done.
A : The reason for including this functionality is to facilitate the period end closure process even when all the transactions are not complete in AP. The system warns you to either correct and complete the transactions in current or Sweep them to next period. If you disable this feature you cannot close the period as unless you complete all the transaction in Payables. This is not advisible. Rest would be the business decision.
Thank you.
Regards
Edited by: mish on Dec 24, 2008 5:29 PM

Invoice date different from GL date

I have several invoices where the GL Date is different from the Invoice Date. For example, the Invoice Date is 10-JUN-2002 and the GL Date is 01-JUL-2002. In all the invoices from another month, the Invoice Date is equal to GL Date. Anyone knows how can I fix this problem? Thanks

I think this problem is not a problem.
The date must be changed by the preparer

Display only data different from the previous row

Hello,
I will use a simple example to explain what I would like to do with a query.
I have a table 'test' with 4 columns (col1, col2, col3, col4).
The table 'test' contains the following data:
A B C D
A E C D
A F G D
K F G HI would like to create a query ordered on the first column with the following result:
A B C D
   E
   F G
K        HOnly data that are different from the previous row have to be displayed.
Do you have ideas on how to do this.
Thanks for your help

SQL> l
1 select
2 decode(a,lag(a) over (order by a),null,a) a,
3 decode(b,lag(b) over (order by a),null,b) b,
4 decode(c,lag(c) over (order by a),null,c) c,
5 decode(d,lag(d) over (order by a),null,d) d
6 from
7 (
8 select 'A' a,'B' b,'C' c , 'D' d from dual
9 union
10 select 'A' a,'E' b,'C' c , 'D' d from dual
11 union
12 select 'A' a,'F' b,'G' c , 'D' d from dual
13 union
14 select 'K' a,'F' b,'G' c , 'H' d from dual
15* )
SQL> /
A B C D
A B C D
E
F G
K     H

PA date different from GL date in cost distribution lines all table

Setup is "maintain common pa and gl periods" is NOT checked, system profile option 'PA: Enable Enhanced Period Processing' is set to 'Yes'. and expenditure cycle start date is Monday. Converting costs back to 2001, all periods, both PA and GL are open. Using Sundays in the last FULL week of the month as the expenditure date, get matching PA and GL dates for all conversion costs prior to 2008. 2008 costs are all coming in with a PA date of 01-oct-2008. Why is 2008 acting differently than prior to 2008?
PA_DATE     GL_DATE     EXPENDITURE_ITEM_DATE
30-Dec-07     30-Dec-07     30-Dec-07
31-Dec-06     31-Dec-06     31-Dec-06
25-Dec-05     25-Dec-05     25-Dec-05
26-Dec-04     26-Dec-04     26-Dec-04
30-Dec-01     30-Dec-01     30-Dec-01
1-Oct-08     31-Aug-08     31-Aug-08
1-Oct-08     27-Jul-08     27-Jul-08
1-Oct-08     29-Jun-08     29-Jun-08
1-Oct-08     25-May-08     25-May-08
1-Oct-08     27-Apr-08     27-Apr-08
1-Oct-08     30-Mar-08     30-Mar-08
1-Oct-08     27-Jan-08     27-Jan-08
Thanks for any help!
Missy

Hi
I suggest you check again the atatus of your PA periods for the 2008 year.
From the results I would have suspected all PA periods between Jan and Sep 2008 are closed.
Dina

App launch date different from apperance date - help !

Hello
I have just searched and trawled through the forum and am unable to find a post regarding the launch date of an app being different from its actual appearance on the store.
My app launched yesterday 20th August but the date showing is the 14th August(date of submission) - hence it has not appeared in the new apps list - this is a little frustrating as it immediately receives no "free" publicity for a few hours whilst it is on the list of new applications.
Has anyone else experienced this yet? - as I seem to remember seing a post regarding tjis issue but cannot find it anymore. I have emailed the dev email and will await a reply but thought the collective knowledge of this forum may be able to help!
Regards
Steve

Steve, any update on your date situation? Did you hear from Apple? What was the final outcome?
I'm having a similar problem outlined in this thread http://discussions.apple.com/thread.jspa?messageID=8140542#8140542

Medical Collection date different from actual EOB date Central State Recovery

Hi, New posting to this particular forum as I usually stay on the Mortgage site, but this issue might be more suited and possibly get an answer here. So I have been disputing the charge for the last two years, but since I am trying to buy a house, I called and asked if they would do a PFD and from others' posts I knew that this particular company would not do so. It was just $25.20 so I paid it. The issue is that the date they say the EOB shows is Sept 2011 but the date the CA reports on my report is 02/21/2012. Is that something that can be changed or am I stuck with that date until June 2018? They do not report to TU just EX and EQ. Any advise would be appreciated. Equifax FICO 850/ Score 5 710TU 826/ Score 4 797Experian 840/ Score 2 699

lilbitinok wrote:
Hi, New posting to this particular forum as I usually stay on the Mortgage site, but this issue might be more suited and possibly get an answer here. So I have been disputing the charge for the last two years, but since I am trying to buy a house, I called and asked if they would do a PFD and from others' posts I knew that this particular company would not do so. It was just $25.20 so I paid it. The issue is that the date they say the EOB shows is Sept 2011 but the date the CA reports on my report is 02/21/2012. Is that something that can be changed or am I stuck with that date until June 2018? They do not report to TU just EX and EQ. Any advise would be appreciated. Equifax FICO 850/ Score 5 710TU 826/ Score 4 797Experian 840/ Score 2 699If the EOB is the billing date from the OC the date in 2012 is the date the CA got the collection, they still have to operate from the accounts DoFD as far as the max time it can remain on file. I would start a GW letter campaign to the CA asking for its removal.

Data extraction from an array of data

So I want to extract a
subset from an array of data.
I have two columns of data that I need to do with,
these are potential energy (expressed in terms of kT) and relative separation. The data typically results in a parabola-type
shape with the potential energy on the y-axis and the separation on the
x-axis. The potential energy starts at
high kT's at small separation and then decreases to zero as the separation
increases and then it starts to increase again once it is past zero kT. The issue I have is that I need to disregard
any data that is greater than 6 kT. Thus
I need to extract the data (both the potential energy data and the
corresponding separation data) from the array that is 6kT or below. So the problem I am having is trying to work
out how to approach the extraction of this data. I would love to get some suggestion as to how
I should approach it.
I initially thought of using a mathscript node to do this,
but I am not sure of how I should code this, if this is indeed possible.
Another option I considered was to use one of the array vi's
to perform this extraction as I thought I could use them to find the element
where the kT is higher than 6 and the corresponding index element which I could
then use to extract the relevant portions of the array. But I don't see an easy way to achieve this.
So the vi I will write for this will function will actually
be a subvi of another vi I have written (this vi is named ‘non-linear fit to PE
data mod.vi' and it also has a couple of other subvis). I have attached this vi and a relevant data
file (as an example of the data I will be getting and needing to analyse) in a
zip file. I haven't included an example
of the subvi I need to write because I looking to find some pointers as to how
I could do this first. In the ‘non-linear
fit to PE data mod.vi' I have included a text box in the location I will be
putting this subvi.
Any help in helping me out here would be appreciated.
Thanks
Solved!
Go to Solution.
Attachments:
data extraction help needed.zip ‏31 KB

Try the attached VI. as per my understanding you want to remove the data in the array which is grater than the specified value,am right?
Balaji PK (CLA)
Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
Remove Data.vi ‏8 KB

How to find Payment term text from Terms of payment.

Dear All,
in table VBRK I can see a field Terms of Payments - ZTERM. Now I need to find the table where I can find Payment term text field ? Can someone tell me how to research this ?
Also if I know address from Kna1 ( field name adrnr ) how can i find the fields linking to table ADRC ?
Many Thanks,
Ashim

Hi,
Payment term table already answered by Anil. Use function module "ADDR1_EXTRACT_TABLES" to extract address information. Pass address number as an input to this function module.
Regards
Vinod

Can we archive data twice from system-Bank master data deleted

We have archived the data of bank after setting it to deletion in program FI_BANKS_WRI.Can i archive same data again from system.

resolved

Where is the data come from when BW extract data from APO's MSP

Hi,all.
The APO system has many datasource,I have activated all the datasource with TCODE RSA5.
I want to extract APO data to BW(Not APO's),where the APO data come from for BW extract,APO BW or SAP transparent table of APO or APO liveCache?
PLZ help me,thank you very much.

Hi,
APO to BI Data Flow :
1. Normally APO DS naming convention start with "9".
2. Normally Planning area will provide the data for the DS.
3. Using one T-Code ( /N/SAP/ ..... Ask APO Person) DS will be generated .In the specified T-Code you will provide the relavant
Planning area and DS will be generated.
4.As you know RSA3 is for checing the data for DS.If you found there is no data for some fields then you will check the data at the planning area level (In R/3 table level).
Regards
Ram.

Can GATP confimed date come from production order finishing date??

Hi Expert,
I have one question to ask.
in the GATP , I want to the APO system can consider the production ability , that is, when I create a sales order, the system will make a GATP check in APO, if there is no enough stock, the system will create a PPDS planned order and return the planner order finsihed date as the schedule line confirmed date.
I do not know this is possible or not??
I hope some expert can help me to solve this problem
thank you in advance!

Hi Liu,
Why Planned order date.. It could be Production order date (planned order release date) + inhouse production time + Transporation lead time + GR processing time (at the original location where the order is placed) ..that should determine the material availability date. CTP exactly does this. Make sure that the "replenishment lead time is switched off" in the product-location master (in fact this is location independent)- as this take precedene over everything else.
Also ensure that that end of checking horizon is larger than the interval established above, else MAD could be much earlier. Also enure that transfer of requirements is set both at header and schudule line level for CTP to work.
Regards,
Loknath

BaseLine date different from Terms Of Payment Date

Similar Messages

Maybe you are looking for