Baseline Offset Bug for Inline Figures

I reported this for Pages 2.0 but it was not fixed in Pages 2.01. It would be good if some others could duplicate and also report this bug. Maybe then Apple will fix it.
My application is with inline figures, mainly, math expressions imported from MathType, but any inline figure displays the same problems and it makes you layout look sloppy.
Paste an inline figure. Select it. Go to the text inspector. Select the more tab. Adjust the base line offset. The spacing between the line the figure is on and the line above does not adjust. In the case of math expression, the baseline of the text in the figure is not the bottom of the figure, so the figures baseline has to be dropped so that the text in the figure lines up with the text in the line where the figure is inserted. This leaves too much white space above the line.

Done... Your Report (Review ID: 949821) - 64bit code with inline breaks when optimized.
For my main piece of code it didn't like the GCC part. Still looking into it.

Similar Messages

  • Baseline Offset Bug for Inline Graphics

    Would like confirmation. Pages 2.0 has a bug in the spacing between lines above an inline graphic.
    If I paste in an inline graphic, pages will move the line the graphic is on down so that the top of the graphic does not overlap the line above. This initial spacing remains fixed and is not properly adjusted when I change the baseline offset of the graphic. If I give the graphic a negative baseline offset, the line above does not move down as it should leaving too much space. If I give the graphic a positive baseline offset, the line above does not move up as it should, and the graphic will overlap the line above.
    This erroneous behavior is not exhibited for the line below. If I give the graphic a negative baseline offset the line below moves down as it should. Since by default, the graphic when pasted in, does not descend below the line it is on, the line below is already up as high as it can be, so a positive baseline offset does not affect the line below.
    It appears that pages calculates an initial spacing to the line above when the graphic is first inserted and improperly keeps that spacing fixed despite later adjustments to the baseline offset of the inserted graphic.

    Done... Your Report (Review ID: 949821) - 64bit code with inline breaks when optimized.
    For my main piece of code it didn't like the GCC part. Still looking into it.

  • Unit 0ORDER_CURR for key figure 0ORDER_VAL is not recognized in the update

    Hello Experts,
    I am getting the below warning while I am installing the business content for Purchasing Cube 0PUR_C04 update Rules
    "Unit 0ORDER_CURR for key figure 0ORDER_VAL is not recognized in the update rules"
    And the business content activation is terminated.
    Can you please let me know how i could resolve.
    Thanks
    Padma

    Hi Amrit,
    Nice to know Toons suggestions have helped you to resolve your issue.
    There is one bug waiting to explode soon although.
    Check this out after your last insert
    INSERT INTO mth_equipment_shifts_d(equipment_fk_key,availability_date,shift_workday_fk_key,from_date,To_Date,line_num,availability_flag,entity_type,creation_date,last_update_date,creation_system_id,
    last_update_system_id) (
    SELECT b.entity_pk_key entity_pk_key,a.shift_date shift_date,a.shift_workday_pk_key shift_workday_fk_key,Trunc(a.shift_date) from_date,Trunc(a.shift_date) To_Date,1 line_num,'Y',
    b.entity_type entity_type,SYSDATE,SYSDATE,-1,-99999
    --INTO l_site_id,l_entity_pk_key,l_entity_name,l_entity_type,l_production_entity,
    --l_shift_workday_pk_key,l1_shift_date,l_from_date,l_to_date
    FROM mth_workday_shifts_d a ,
    SELECT plant_fk_key site_id, entity_pk_key, entity_name, entity_type, production_entity production_entity
    FROM mth.mth_equip_entities_mst
    UNION ALL
    SELECT plant_pk_key site_id, plant_pk_key entity_pk_key, plant_name entity_name, 'Site', production_site production_entity
    FROM mth.mth_plants_d
    UNION ALL
    SELECT plant_fk_key site_id, resource_pk_key entity_pk_key, resource_name entity_name, 'Resource', production_resource production_entity
    FROM mth.mth_resources_d
    UNION ALL
    SELECT plant_fk_key site_id, equipment_pk_key entity_pk_key, equipment_name entity_name, 'Equipment', production_equipment production_entity
    FROM mth.mth_equipments_d
    )b
    WHERE b.site_id = a.plant_fk_key
    AND a.plant_fk_key=l_plant_fk_key
    AND shift_date>=l_start_date
    AND shift_date<=l_end_date
    AND UPPER(a.shift_type)='BOTH'
    AND a.FROM_DATE IS NULL
    AND a .To_Date IS NULL
    --AND a.line_num=NULL
    AND a.shift_num IS NULL
    There is no COMMIT
    You may want to check that out.
    Cheers!!!
    Bhushan

  • Planning DB Deploy aborts since "No baseline was found for transaction ID 8

    Not sure if this is a bug or something we caused on our end but we cannot deploy a planning database anymore. We get the message: Deploy aborted since "No baseline was found for transaction ID 85905". This happens during the export phase. We are using EPM Architect with Planning 11.1.1.10.
    Curious if anyone else has ever run into this error.
    Thanks,
    Jeff Brown

    We ran into a similar issue yesterday, except the transaction ID in the ds_baseline_library was greater than any transaction ID's in the or_object table.
    Here's what Oracle thinks happened:
    Baseline records were likely to be deleted by a baseline cleanup kicking in during application deployment. Normally, the cleanup only deletes older baselines but causes problems if run while an application is deployed.
    We don't believe this is what happened as the cleanup was scheduled to run at 3:00am, so who knows what really happened. Here is the guidance we received in terms of resolving the issue (we didn't follow this, but I suspect it would work):
    From your update it is clear that EPMA still looks for the same baseline records which apparently do not exist anymore.
    The steps below should bring this to work.
    1. Create backup of the Planning application database.
    2. Create backup of the Essbase data, Calculation scripts, rule files, substitution variables.
    3. Delete the affected Planning application in EPMA (this should delete it in Planning and Essbase as well).
    4. Create a classic Planning application with same name as the deleted application.
    5. Override the classic Planning application database (step 4) by using the Planning application database backup (step 1).
    6. Using an administrator user, log into the Planning application and navigate to Administration > Manage Properties.
    7. On the “Application Properties” tab, click “Add” and enter a new property “EDIT_DIM_ENABLED” with a value of “true”. Click “Save” at the bottom of the page.
    8. Once you have completed steps 6 and 7, restart the Planning service.
    9. Log into the Workspace and Navigate > Administer > Application Upgrade. This upgrade wizard should list the newly created classic Planning application as “Upgradeable”. Select the application and upgrade it as local dimensions.
    10. The application should now be visible in the EPMA application library and its dimensions loaded as local dimensions.
    11. Use EPMA to deploy the newly created Planning application.
    12. Restore the Essbase data, Calculation scripts, rule files, substitution variables.
    Here's what we did:
    1) Export our forms.
    2) Copy the app in EPMA.
    3) Deploy the new app just to make sure it works.
    4) Delete the old app in EPMA.
    5) Copy our "copy" to the original app and re-deploy.
    6) Import our forms.
    We lost a few items with this approach (business rules and variables), but we hadn't developed much yet. We felt this was cleaner than copying a repository into a Classic app and then upgrading that app to EPMA. Either way, we're back iin business. FYI - it looks as though this issue may be fixed in 11.1.1.2. In the release notes, under fixed defects, check out defect # 7573567. Sounds like this is the same problem.

  • [Patch 정보] TRACKING BUG FOR CUMULATIVE MLR#6 ON TOP OF BPEL PM 10.1.3.3.1

    최근에 출시된 BPEL PM 10.1.3.3.1의 통합패치입니다.
    아래는 readme.txt에 포함된 patch list입니다.
    # WARNING: Failure to carefully read and understand these requirements may
    # result in your applying a patch that can cause your Oracle Server to
    # malfunction, including interruption of service and/or loss of data.
    # If you do not meet all of the following requirements, please log an
    # iTAR, so that an Oracle Support Analyst may review your situation. The
    # Oracle analyst will help you determine if this patch is suitable for you
    # to apply to your system. We recommend that you avoid applying any
    # temporary patch unless directed by an Oracle Support Analyst who has
    # reviewed your system and determined that it is applicable.
    # Requirements:
    # - You must have located this patch via a Bug Database entry
    # and have the exact symptoms described in the bug entry.
    # - Your system configuration (Oracle Server version and patch
    # level, OS Version) must exactly match those in the bug
    # database entry - You must have NO OTHER PATCHES installed on
    # your Oracle Server since the latest patch set (or base release
    # x.y.z if you have no patch sets installed).
    # - [Oracle 9.0.4.1 & above] You must have Perl 5.00503 (or later)
    # installed under the ORACLE_HOME, or elsewhere within the host
    # environment.
    # Refer to the following link for details on Perl and OPatch:
    # http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189489.1
    # If you do NOT meet these requirements, or are not certain that you meet
    # these requirements, please log an iTAR requesting assistance with this
    # patch and Support will make a determination about whether you should
    # apply this patch.
    # 10.1.3.3.1 Bundle Patch 6823628
    # DATE: March 14, 2008
    # Platform Patch for : Generic
    # Product Version # : 10.1.3.3.1
    # Product Patched : Oracle(R) SOA
    # Bugs Fixed by 10.1.3.3.1 Initial patch 6492514 :
    # Bug 5473225 - PATCH01GENESIS HOT UNABLE TO CATCH AN EXCEPTION DURING A
    # TRANSFORM
    # Bug 5699423 - PARTNERLINK PROPERTY THAT SET BPELXPROPERTY FUNCTION DOESN'T
    # WORK
    # Bug 5848272 - STATEFUL WEBSERVICES DEMO ON OTN DOES NOT WORK 10.1.3.1
    # Bug 5872799 - ANT DEPLOY BPEL TEST FAILS/RUNS ON DEFAULT DOMAIN NOT
    # SPECIFIED TARGET DOMAIN
    # Bug 5883401 - ALLOW A WAY TO CREATE EMPTY NODES - AND USE FOR REQUIRED
    # NODES
    # Bug 5919412 - SAMPLE DEMO BPEL PROCESSES MIMESERVICE MIMEREQUESTER AXIS
    # JAVA EXAMPLE ERROR
    # Bug 5924483 - ESB SHOULD SUPPORT SOAP EDNPOINT LOCATION DYNAMIC UDDI LOOKUP
    # Bug 5926809 - ORAPARSEESCAPEDXML XPATH EXPRESSION FAILED TO EXECUTE
    # FOTY0001 TYPE ERROR
    # Bug 5937320 - STRANGE BEHAVIOUR CALLING FROM BPEL TO BPEL GETTING
    # NULLPOINTEREXCEPTION.
    # Bug 5944641 - BPA BLUEPRINT NOT AVAIALBLE IN JDEVELOPER
    # Bug 5945059 - JAVA.LANG.NULLPOINTEREXCEPTION SENDING EMAILS WITH PAYLOADS
    # LARGER THAT 1MB
    # Bug 5962677 - WS RESPONSE IS EMPTY SOAP BODY IN ONE-WAY CALL
    # Bug 5963425 - WHEN THE OUTCOMES FOR A HT CHANGED & IMPORTED - UPDATE
    # CONNECTION ROLES IN BPEL
    # Bug 5964097 - AQ ADAPTER DEPLOYMENT CAUSES OPMN TO PERFORM A FORCEFUL
    # SHUTDOWN IN SOA
    # Bug 5971534 - CANNOT GRANT USER TASK VIEWS TO GROUPS, ONLY TO USERS.
    # Bug 5989367 - REFER TO SR 6252219.993 BPEL 10.1.3 ONLY COPIES IN ASSIGN,
    # IN 10.1.2 IT CREATES
    # Bug 5989527 - ENHANCEMENT WARNING SHOULD BE GIVEN UPON UPLOAD IF BPEL
    # PROCESS IS OPEN IN ARIS
    # Bug 5997936 - ESB FAULT DOES NOT GET PROPAGATED TO BPEL
    # Bug 6000575 - PERF NEED ESB PURGE SCRIPT TO PURGE BY DATE AND PROCESS
    # Bug 6001796 - POSTING OF DATE RECEIVED FROM XML GATEWAY TO BPEL FAILED IN
    # ESB
    # Bug 6005407 - BPEL PROCESS DOESN'T PROPOGATE FAULT THROWN BY BPEL
    # SUB-PROCESS
    # Bug 6017846 - MIMETYPE OF EMAIL NOTIFICATION IS NOT SET THROUGH HUMAN TASK
    # Bug 6027734 - DECISION SERVICE IMPORT - LOCATING DECISION SERVICE IN .DECS
    # FILE IMPROPER
    # Bug 6028985 - EXCEEDED MAXIMUM NUMBER OF SUBSCRIBERS FOR QUEUE
    # ORAESB.ESB_CONTROL
    # Bug 6041508 - CREATING/UPDATING DVM CAUSE EXCEPTION
    # Bug 6053708 - FTP ADAPTER DOES NOT SUPPORT ENCRYPTED PASSWORD IN
    # OC4J-RA.XML
    # Bug 6054034 - INDEX4,INDEX5 AND INDEX6 CANNOT BE USED IN BPEL CONSOLE
    # Bug 6068801 - BACKPORT OF BPEL ON WEBLOGIC - VERSION 10.1.3.3
    # Bug 6070991 - HT EXPORT DOES NOT EXPORT PARAMETERS, ALLOW PARTICIPANTS TO
    # INVITE OTHERS
    # Bug 6071001 - WSIF HTTP BINDING NOT WORKING FROM ESB
    # Bug 6073311 - STRESS SCOPE NOT FOUND ON CALLBACK - WRONG (DUPE)
    # SUBSCRIPTION IN TABLE
    # Bug 6081070 - JMS ADAPTER REJECTION HANDLER CREATE 0 BYTE FILES
    # Bug 6083419 - DECISION SERVICE SCOPE NEED TO HAVE A SPECIAL INDICATOR
    # Bug 6085799 - HUMAN TASK ADDED IN SCOPE IN JDEV IS NOT UPDATED TO BPA
    # SERVER
    # Bug 6085933 - EXPORT AND EXPLORE SHOULD USE USER LANGUAGE AND NOT ENGLISH
    # ALWAYS
    # Bug 6086281 - STRING INDEX OUT OF RANGE ERROR FOR COBOL COPYBOOK WITH PIC
    # CLAUSE HAVING S
    # Bug 6086453 - DOMAINS CREATED IN A CLUSTER GETS NOT PROPAGATED TO NEW OR
    # EXISTING NODES
    # Bug 6087484 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
    # Bug 6087645 - ESB SHOULD ALLOW USER PICK RUNTIME PROTOCOL (HTTP/HTTPS)
    # Bug 6110231 - TRANSLATION NOT BASED ON MQ CCSID CHARSET
    # Bug 6120226 - BPEL IS NOT SETTING THE APPS CONTEXT CORRECTLY
    # Bug 6120323 - COMPLETIONPERSISTPOLICY ON DOMAIN LEVEL HAS DISAPPEARED
    # Bug 6125184 - ESB JMS SESSION ROLLBACK ORACLE.JMS.AQJMSEXCEPTION
    # Bug 6127824 - [AIA2.0] CURRENT XREF IMPLEMENTATION IS MISSING REQUIRED
    # INDEXES ON XREF SCHEMA
    # Bug 6128247 - HTTPCONNECTOR POST() METHOD SHOULD RAISE EXCEPTION FOR ALL
    # STATUS CODES EXCEPT 2
    # Bug 6131159 - ENABLE USERS TO CHOOSE XSD WHEN CREATING A BPEL PROCESS FROM
    # BLUE PRINT
    # Bug 6132141 - PROCESS_DEFAULT TABLE STILL CONTAINS INFORMATION FROM
    # UNDEPLOYED PROCESSES
    # Bug 6133190 - ENABLING ESB CONSOLE HTTP/S IS MAKING THE CONSOLE TO COME UP
    # BLANK.
    # Bug 6139681 - BPEL WSDL LINK IN CLUSTERED RUNTIME POINTS TO A SINGLE NODE
    # Bug 6141259 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
    # BINDING IN BPEL
    # Bug 6148021 - BPEL NATIVE SCHEMA FOR COBOL COPYBOOK WITH IMPLIED DECIMAL
    # LOSES DIGIT IN OUTPUT
    # Bug 6149672 - XOR DATA - CONDITION EXPRESSION SPECIFICATION IS NOT
    # INTUITIVE IN BPMN MODELS
    # Bug 6152830 - LOSING CONDITIONAL EXPRESSIONS CREATED IN JDEV UPON MERGE
    # Bug 6158128 - BASICHEADERS NOT PUTTING WWW-AUTHENTICATE HEADERS FOR HTTP
    # BINDING
    # Bug 6166991 - WHEN STARTING SOA SUITE,, PROCESSES FAIL DUE TO UNDEFINED
    # WSDL
    # Bug 6168226 - LOCATION-RESOLVER EXCEPTION THROWN IN OPMN LOGS
    # Bug 6187883 - CHANGES FOR BPEL RELEASE ON JBOSS- VERSION 10.1.3.3
    # Bug 6206148 - [AIA2.0] NEW FUNCTION REQUEST, XREFLOOKUPPOPULATEDCOLUMNS()
    # Bug 6210481 - BPEL PROCESS WORKS INCORRECTLY WHEN AN ACTIVITY HAS MULTIPLE
    # TRANSITIONCONDITION
    # Bug 6240028 - WEBSERVICE THAT DOES NOT CHALLENGE FOR BASIC CREDENTIALS
    # CANNOT BE INVOKED
    # Bug 6257116 - MULTIPLE HEADER SETTING CAUSES ESB EXCEPTION
    # Bug 6258925 - MESSAGE RECEIVED BY THE TARGET ENDPOINT VIA HTTP POST IS
    # MISSING THE XML HEADER
    # Bug 6259686 - TOO MANY UNNECESSARY WORKFLOW E-MAIL NOTIFICATIONS GENERATED
    # Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
    # BUSINESS EVENT
    # Bug 6272427 - WEBSPHERE BPEL FAILS FOR DATA RETRIEVAL OF SIZE 500+ KB
    # Bug 6276995 - MERGE SCOPE NAME IS NOT UPDATED WHEN CHANGED IN THE SERVER
    # Bug 6280570 - XPATH EXPRESSION ERROR IN MEDIATOR FOR ASSIGNING USER-DEFINED
    # CONTEXT VALUES
    # Bug 6282339 - RETRYCOUNT DOES NOT WORK PROPERLY
    # Bug 6311039 - ONE RECORD IS INSERTED TO SYNC_STORE IF
    # COMPLETIONPERSISTPOLICY SET TO FAULTED
    # Bug 6311809 - [AIA2.0] NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR
    # TOPIC
    # Bug 6314784 - THE PRIORITY DEFINED IN THE BPA SUITE IS NOT TRANSFERRED TO
    # THE JDEV CORRECTLY
    # Bug 6314982 - THREADPOOL RACE CONDITION IN ADAPTER INITIALIZATION MESSAGES
    # NOT PROCESSED
    # Bug 6315104 - (SET)CLASSNAME MISSING IN TSENSOR JAXB OBJECTS
    # Bug 6316554 - CONSUME FUNCTIONALITY OF JMS ADAPTER FOR BEA WEBLOGIC DOES
    # NOT WORK
    # Bug 6316950 - FILEADAPTER HARPER ENHANCEMENTS SYNC WRITE AND CHUNKED
    # INTERACTION SPEC
    # Bug 6317398 - THE ICON FOR COMPUTING DIFFERENCE IS MISSING IN JDEV REFRESH
    # FROM SERVER DIALOG
    # Bug 6320506 - IMPORT FAILS WHEN THERE IS AN UNNAMED CASE
    # Bug 6321011 - CANNOT PROCESS 0 BYTE FILE USING FTP ADAPTER
    # Bug 6325749 - TRACKING BUG FOR TRACKING ADDITIONAL CHANGES TO BUG #6032044
    # Bug 6328584 - NEED A NEW XPATH EXPRESSION TO GET ATTACHMENT CONTENT VIA
    # SOAP INVOKATION
    # Bug 6333788 - COLLAPSING OF CONSECUTIVE ASSIGN TASKS BREAKS BAM SENSOR
    # Bug 6335773 - BUILD.XML CONTAINS DO NOT EDIT .. - WHILE <CUSTOMIZE> TASK
    # MUST BE IN <BPELC>
    # Bug 6335805 - AQ ADAPTER OUTBOUND DOESN'T RECONNECT AFTER FAILURE
    # Bug 6335822 - [AIA2.0] PSRPERFESB - RUNTIME DVM PERFORMANCE OVERHEAD IN ABS
    # USE CASE
    # Bug 6339126 - CHECKPOINT BPEL JAVA METHOD DOESN'T WORK IN BPEL 10.1.3.3
    # Bug 6342899 - OUTLINECHANGE.XML NOT UPDATE WITH ACTIVITY FROM NEW BRANCH
    # Bug 6343299 - ESB CONCRETE WSDL NAMESPACE SHOULD BE DIFFERENT FROM IMPORTED
    # WSDL NAMESPACE
    # Bug 6372741 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3
    # Bug 6401295 - NXSD SHOULD SUPPORT ESCAPING THE TERMINATED/QUOTED/SURROUNDED
    # DELIMITERS
    # Bug 6458691 - DIST DIRECTORY FOR 10.1.3.3.1 NEEDS UPDATE
    # Bug 6461516 - BPEL CONSOLE CHANGES FOR DISPLAYING RELEASE 10.1.3.3.1
    # Bug 6470742 - CHANGE THE VERSION NUMBER AND BUILD INFO IN ABOUT DIALOG IN
    # ESB
    # BUG ADDED IN MLR#1, 6671813 :
    # Bug 6494921 - ORABPEL-02154 IF LONG DOMAIN AND SUITECASE NAMES IN USE
    # BUGS ADDED IN MLR#2, 6671831 :
    # Bug 6456519 - ERROR IN BPEL CONSOLE THREADS TAB:SERVLETEXCEPTION CANNOT GET
    # DISPATCHER TRACE
    # Bug 6354719 - WHICH JGROUP CONFIGURATION PARAMETER IMPACTS BPEL CLUSTER
    # ACTIVITY
    # Bug 6216169 - SCOPE NOT FOUND ERROR WHILE DELIVERING EXPIRATION MESSAGE OF
    # ONALARM
    # Bug 6395060 - ORA-01704 ON INSERTING A FAULTED INVOKE ACTIVITY_SENSOR
    # Bug 6501312 - DEHYDRATION DATABASE KEEPS GROWING IN 10.1.3.3 #2
    # Bug 6601020 - SEARCHBASE WHICH INCLUDES PARENTHESIS IN THE NAMES DOES NOT
    # WORK
    # Bug 6182023 - WAIT ACTIVITY FAILS TO CONTINUE IN CLUSTER WHEN PROCESSING
    # NODE GOES DOWN
    # BUGS ADDED IN MLR#3, 6723162 :
    # Bug 6725374 - INSTANCE NOT FOUND IN DATASOURCE
    # Bug 4964824 - TIMED OUT IF SET CORRELATIONSET INITIATE YES IN REPLY
    # ACTIVITY
    # Bug 6443218 - [AIA2.0]BPEL PROCESS THAT REPLIES A CAUGHT FAULT AND THEN
    # RETHROWS IT IS STUCK
    # Bug 6235180 - BPPEL XPATH FUNCTION XP20 CURRENT-DATETIME() IS RETURNING AN
    # INCORRET TIME
    # Bug 6011665 - BPEL RESTART CAUSES ORABPEL-08003 FAILED TO READ WSDL
    # Bug 6731179 - INCREASED REQUESTS CAUSE OUTOFMEMORY ERRORS IN OC4J_SOA WHICH
    # REQUIRES A RESTART
    # Bug 6745591 - SYNC PROCESS <REPLY> FOLLOWED BY <THROW> CASE CAUSING
    # OUTOFMEMORY ERRORS
    # Bug 6396308 - UNABLE TO SEARCH FOR HUMAN TASK THAT INCLUDES TASK HISTORY
    # FROM PREVIOUS TASK
    # Bug 6455812 - DIRECT INVOCATION FROM ESB ROUTING SERVICE FAILS WHEN CALLED
    # BPEL PROCESS
    # Bug 6273370 - ESBLISTENERIMPL.ONFATALERROR GENERATING NPE ON CUSTOM ADAPTER
    # Bug 6030243 - WORKFLOW NOTIFICATIONS FAILING WITHOUT BPELADMIN USER
    # Bug 6473280 - INVOKING A .NET 3.0 SOAP SERVICE EXPOSED BY A ESB ENDPOINT
    # GIVES A NPE
    # BUGS ADDED IN MLR#4, 6748706 :
    # Bug 6336442 - RESETTING ESB REPOSITORY DOES NOT CLEAR DB SLIDE REPOSITORY
    # Bug 6316613 - MIDPROCESS ACTIVATION AGENT DOES NOT ACTIVATED FOR RETIRED
    # BPEL PROCESS
    # Bug 6368420 - SYSTEM IS NOT ASSIGNING TASK FOR REAPPROVAL AFTER REQUEST
    # MORE INFO SUBMITTED
    # Bug 6133670 - JDEV: UNABLE TO CREATE AN INTEGRATION SERVER CONNETION WHEN
    # ESB IS ON HTTPS
    # Bug 6681055 - TEXT ATTACHMENT CONTENT IS CORRUPTED
    # Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
    # Bug 5521385 - [HA]PATCH01:ESB WILL LOSE TRACKING DATA WHEN JMS PROVIDER IS
    # DOWN
    # Bug 6759068 - WORKLIST APPLICATION PERFORMANCE DEGRADATION W/ SSL ENABLED
    # FOR BPEL TO OVD
    # BUGS ADDED IN MLR#5, 6782254 :
    # Bug 6502310 - AUTOMATED RETRY ON FAILED INVOKE WITH CORRELATIONSET INIT
    # FAILS
    # Bug 6454795 - FAULT POLICY CHANGE NEEDS RESTART OF BPEL SERVER
    # Bug 6732064 - FAILED TO READ WSDL ERROR ON THE CALLBACK ON RESTARTING BPEL
    # OC4J CONTAINER
    # Bug 6694313 - ZERO BYTE FILE WHEN REJECTEDMESSAGEHANDLERS FAILS
    # Bug 6686528 - LINK IN APPLICATION.XML FILES CHANGED TO HARD LINKS WHEN MORE
    # THAN 1 HT PRESENT
    # Bug 6083024 - TEXT AND HTML DOC THAT RECEIVED AS ATTACHMENTS WERE EITHER
    # BLANK OR GARBLED
    # Bug 6638648 - REQUEST HEADERS ARE NOT PASSED THROUGH TO THE OUTBOUND HEADER
    # Bug 6267726 - 10.1.3.3 ORACLE APPLICATIONS ADAPTER - NOT ABLE TO CAPTURE
    # BUSINESS EVENT
    # Bug 6774981 - NON-RETRYABLE ERRORS ARE NOT POSTED ON ESB_ERROR TOPIC
    # Bug 6789177 - SFTP ADAPTER DOES NOT SUPPORT RENAMING FILES
    # Bug 6809593 - BPEL UPGRADE TO 10.1.3.3.1 WITH ESB CALLS FAILS DUE TO
    # CACHING OF PLNK - SERVICE
    # BUGS ADDED IN MLR#6, 6823628 :
    # Bug 6412909 - <BPELX:RENAME> DOES NOT ADD XMLNS DECLARATION AUTOMATICALLY
    # Bug 6753116 - OUTPUT FROM HUMAN TASK IS NOT IS NOT CONSISTENT WITH
    # SCHEMA
    # ORDERING
    # Bug 6832205 - BAD VERIFICATIONSERVICE PERFORMANCE IF LDAP SERVICE HAS HUGE
    # DATA
    # Bug 6189268 - CALLING BPEL PROCESS VIA SOAP FROM ESB FAILS WITH
    # NAMENOTFOUNDEXCEPTION
    # Bug 6834402 - JMS ADAPTER IMPROPERLY CASTS XAQUEUESESSION TO QUEUESESSION
    # Bug 6073117 - TASK SERVICE DOESN'T RENDER THE TASK ACTIONS
    # Bug 6054263 - REUSING SOAP WSDL IN RS CAUSES SOAP ACTION'S NS TO BE
    # STRIPPED
    # AWAY
    # Bug 6489703 - ESB: NUMBER OF LISTENERS > 1 GIVES JMS EXCEPTION UNDER STRESS
    # Bug 5679542 - FTP ADAPTER: COULD NOT PARSE TIME:
    # JAVA.LANG.STRINGINDEXOUTOFBOUNDSEXCEPTION
    # Bug 6770198 - AQ ACTIVATIONINSTANCES >1 DOESN'T WORK IN ESB
    # Bug 6798779 - ESB ROUTING RULES CORRUPTED ON RE-REGISTERING WITH ROUTING
    # ORDER
    # IN WSDL CHANGED
    # Bug 6617974 - BACKPORT REQUEST FOR MOVING FILES FUNCTION OF FTP ADAPTER
    # Bug 6705707 - VALIDATION ON ESB CAN'T HANDLE NESTED SCHEMAS
    # Bug 6414848 - FTP ADAPTER ARCHIVE FILENAME FOR BPEL IS BEING SCRAMBLED
    # AFTER
    # THE 10.1.3.3 UPGR
    # Bug 5990764 - INFORMATION ARE LOST WHEN BPEL PROCESS IS POLLING FOR MAILS
    # WITH
    # ATTACHEMENTS
    # Bug 6802070 - ORA-12899 SUBSCRIBER_ID/RES_SUBSCRIBER COLUMN SMALL FOR LONG
    # DOMAIN AND PROCESS
    # Bug 6753524 - WRONG SERVICE ENDPOINT OPEN WHEN TEST WEB SERVICE OF ESB
    # Bug 6086434 - PROBLEM IN BPEL FILE ADAPTER WHILE READING A FIXED LENGTH
    # FILE
    # Bug 6823374 - BPEL 10.1.3.3.1 BAM SENSOR ACTION FAILS WITH BAM 11
    # Bug 6819677 - HTTS STATUS 202 RETURNED INSTEAD OF SOAP FAULT
    # Bug 6853301 - MQ ADAPTER REJECTED MESSAGES IS NOT REMOVED FROM THE RECOVERY
    # QUEUE
    # Bug 6847200 - 10.1.3.3.1 PATCH (#6748706) HAS STOPPED FTP ADAPTER POLLING
    # IN
    # SFTP MODE
    # Bug 6895795 - AQ OUTBOUND DOESN'T WORK WITH MLR#6
    업무에 참고하시기 바랍니다.

    David,
    You are right, theer are some changes incorporated in the latest MLR # 16 on the configurations files and on the dehydration store metrics(such as performance, fields,..).
    However, I would not suggest to continue working on olite, even for Development/Test purposes as you might get stuck with strange errors...and the only solution would be to re-install SOA Suite if your olite gets corrupted. There might be ways to gets your olite back to position, but trust me..its not so simple.
    Also, when you develop and stress test all your testcase scenarios in an TEST Adv installation, its simple to mimic the same in actual production box, as you exactly know its behavior.
    So, go for a brand new SOA 10.1.3.4 MLR # 5 (or) 10.1.3.3.1 MLR # 16 SOA Suite Advanced installation with Oracle DB 10.2.0.3 as its dehydration store.
    Hope this helps!
    Cheers
    Anirudh Pucha

  • Currency translation for key figure in bex not working.

    Hi friends,
    i want to do currency translation for key figure(invoice value in local currency).
    i have followed the steps as under:
    1st Transferring Global Table Contents: Currencies from R/3 Systems
    2nd than transfer exchange rate - from r/3 to bi
    3 than In SPRO settings of BW there is option "consider translation ratios in translation"
    4th than used transaction RSCUR for creating currency translation type: parameter(exchange rate:m, soure currency fom data records, target currency ISK, time ref: current date)
    5th than in BEX query designer have sated this for key figure
    but when i run query in RSRT, curreny amount not getting convert?
    am i missing any step?
    pl. guide.
    thanks dushyant.

    Hi Dushyant,
    Are these steps followed in Query designer??
    In the Query designer, for that particular key figure property, under Conversion tab >> Currency Translation >> Conversion Type, select the currency translation type you created in RSCUR.
    And in the target currency, select accordingly.
    If you are going to use a variable, use the following link..
    http://help.sap.com/saphelp_nw04/helpdata/en/08/81b98b95e911d4b2ca0050da4c74dc/content.htm
    See also..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/287bab90-0201-0010-f48e-cc55b0cd13d0
    Hope this helps..!
    -Pradnya
    Edited by: Pradnya Rane on Apr 8, 2009 7:58 AM

  • How to get sum of bugs for particular Mnth and particular Year dynamically?

    Hi All,
    I've a query related to dynamic date and year :
    select bug_id,
    category,
    count(*) Total_bugs,
    SUM(CASE when bug_date >= '10/1/2011' and bug_date <= '10/31/2011' Then 1 else 0 end) OCT_11,
    SUM(CASE when bug_date >= '9/1/2011' and bug_date<= '9/30/2011' Then 1 else 0 end) SEP_11,
    FROM AA_BUG_TBL
    GROUP BY BUG_ID,BUG_CATEGORY
    In the above query,Can we write one sum statement to get sum of bugs for a particular month and particular year dynamically?
    for ex:2 bugs between 10/1/2011 and 10/31/2011 then 2 under oct_11
    5 bugs between 09/01/11 and 09/30/2011 then 5 under sep_11
    In this case we need to calculate correct no of days for feb
    Thanks,
    Mahender.

    So...
    You need to iterate based on something like the month, quarter, year... Then query on that. I'll use a "WITH" clause to illustrate:
    with my_bugs as
        select bug_id
             , bug_date
             , case when to_char ( bug_date, 'QYYYY' ) = '12009' then 1 else 0 end y2009q1_bug
             , case when to_char ( bug_date, 'QYYYY' ) = '22009' then 1 else 0 end y2009q2_bug
             , case when to_char ( bug_date, 'QYYYY' ) = '32009' then 1 else 0 end y2009q3_bug
             , case when to_char ( bug_date, 'QYYYY' ) = '42009' then 1 else 0 end y2009q4_bug
             , case when to_char ( bug_date, 'YYYY' ) = 2009 then 1 else 0 end y2009_bug
             , case when to_char ( bug_date, 'YYYY' ) = 2010 then 1 else 0 end y2010_bug
             , case when to_char ( bug_date, 'YYYY' ) = 2011 then 1 else 0 end y2011_bug
             , case when 1 = 1 then 1 else 0 end is_bug_flag
          from bugs
      select bug_id
           , bug_date
           , sum   ( y2009q1_bug ) over () as total_bugs_2009q1
           , sum   ( y2009q2_bug ) over () as total_bugs_2009q2
           , sum   ( y2009q3_bug ) over () as total_bugs_2009q3
           , sum   ( y2009q4_bug ) over () as total_bugs_2009q4
           , sum   ( y2009_bug   ) over () as total_bugs_2009
           , count (*)             over ( partition by is_bug_flag ) as total_bugs
        from my_bugsI mocked up some data so my results will be drastically different than yours but here are the results:
        BUG_ID BUG_DATE  TOTAL_BUGS_2009Q1 TOTAL_BUGS_2009Q2 TOTAL_BUGS_2009Q3 TOTAL_BUGS_2009Q4 TOTAL_BUGS_2009 TOTAL_BUGS
          2014 10-SEP-10                 0                 0               114              1143         1257         10000
          2015 14-APR-10                 0                 0               114              1143         1257         10000
          2016 30-NOV-09                 0                 0               114              1143         1257         10000
          2017 03-JUN-11                 0                 0               114              1143         1257         10000
          2018 29-DEC-10                 0                 0               114              1143         1257         10000
          2019 12-JAN-11                 0                 0               114              1143         1257         10000
          2020 21-APR-10                 0                 0               114              1143         1257         10000
          2021 12-JAN-11                 0                 0               114              1143         1257         10000
          2022 29-NOV-10                 0                 0               114              1143         1257         10000
          2023 20-JUL-11                 0                 0               114              1143         1257         10000
          2024 04-MAR-11                 0                 0               114              1143         1257         10000

  • My songs are missing in the music and the used memory doesn't change. Is it a bug for IOS7? How can I fix it?

    I plugged my ipod touch 5 via usb to the pc and browsed my music on itunes. And suddenly i played some music and there's a exclamation point before the song. I haven't deleted that song or moved. And the whole album was gone. And i checked the number of songs on my ipod and it decreased without change in memory used. Is it an another BUG for ios7? is there a way to fix it?

    That indicates the song files are not corrupted.
    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    What is the Other on my iPhone and How to Remove It
    An large "other" usually indicates that the "other" includes corrupted files.
    First try:
    "First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
    as recommended by:
    How do I get rid of "other" storage: Apple Support Communities
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • How to write conversion routine for key figure?

    Our customer has this requirment:
    we need to know the last time of some TV program in BEx report, If a TV program last 500 seconds, we need show the key figure like this:  00:08:20, If a TV program last 100000 seconds, we need show the key figure like 27:46:40 (27 hours and 46 minitues and 27 seconds), If we define a key figure as time,  BW system will report a error that say it is not acceptable time.  If we want to define a integer, but we need display it like hhmmss format.  We know we can write conversion routine for char.  but I don't how to write conversion routine for key figure.   Please give me any hint if any other solutions?
    Edited by: SY DONG on Dec 2, 2010 3:36 AM

    If you want to do in Transformation Layer :
    You can use routine ...break up the seconds into minute hour and seconds
    you will have to handle few cases in this:
    let say your variable lv_seconds holds the number of seconds you want to convert to hour min and seconds
    DATA: lv_seconds type i,
               lv_hrs  type  i,
              lv_sec type i,
              lv_min type i.
    lv_hrs = lv_seconds / 3600
    if lv_hrs >= 1.
    lv_min = (lv_hrs - trunc(lv_hrs))*60
    here again handle seconds if min >60.
    else.
    lv_hrs = '00'.
    lv_min = lv_hrs*60
    It is just hint ..how you can manipulate the seconds to get it...you will have to think about the complete algorithm
    Regards,
    RK

  • A possible bug for Grid control?

    Hi, Dear all,
    We installed Grid control 10.2.0.1 on Redhat Linux R3 with existing database(10.2.0.4).
    During the installation, we succeeded for repository creating but failed at OMS Configuration.
    When I start oms in cmd line, I got the following error: the repository database can not be connected.
    The description for the environment:
    1. OMS server and repository database are installed on the same server, on which HA is used.
    2. There are two floating IP on this machine,
    IP | server name | used for |
    xx.xx.xx.124 | cnsz030318 | oms server |
    xx.xx.xx.80 | oem.db.paci.com.cn | repository database |
    3.When we installed the oms with OUI, the repository server we input is oem.db.paci.com.cn
    The problem we found:
    During the installation, the repository was created successfully. But it failed at OMS configuration.
    The error we got: the repository database can not be connected.
    there are two lines in emoms.properities which seems strange:
    oracle.sysman.eml.mntr.emdRepServer=oem.db.paic.com.cn
    oracle.sysman.eml.mntr.emdRepConnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=cnsz030318.db.paic.com.cn)(PORT\=1535)))(CONNECT_DATA\=(SID\=oem10g)))
    The emdRepServer is what we have input on OUI:oem.db.paic.com.cn. But for the connectDescriptor, it is changed to "cnsz030318.db.paic.com.cn", which does not exist at all!.
    Now, we have worked around this problem by adding "cnsz030318.db.paic.com.cn" in the /etc/hosts.
    But my question is, why the connectDescriptor set the HOST\ as cnsz030318.db.paic.com.cn? Why does it not use the name we input in OUI (oem.db.paic.com.cn)?
    Maybe it is a bug for Grid control?

    Did you install with "Use existing database" or "Use new database"?
    I recommend that you use fully qualified domain names only!
    Best regards,
    Martin Decker
    www.ora-solutions.net
    Edited by: mdecker on Jan 7, 2009 2:24 PM

  • Offsetting Account for Sundry Debtors and Sundry Creditors

    Hi All
    I want to create offsetting account for Sundry Debtors and Sundry Credtitors.Where to create it.
    Warm rgs
    anand

    Hi,
             Purchase Offset Account
    Thanks
    Mansoor

  • IMessage automatically sends as SMS even if turned off in the Settings. Is this a bug for ios 6.0.1?

    I know there's still bugs for iMessage and so when I'm not on wifi but the iMessage is turned on, I don't wait for the iMessage to fail sending. I press and hold the message to send it as text message instead immediately. Then the recepient tells me that they receive my text messages twice. So what I did today, I sent an iMessage without being connected to wifi and let it attempt to send and let it fail. To my surprise, after failing as iMessage, it automatically sent as an SMS when I had that setting turned off. Do I make sense? Do you guys also experience the same problem?

    When imessage is unavailable it sends it as SMS - that is normal see link http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • Offset Account for Freight Account

    Hello folks,
    In transaction type window, I can see GL account for Freight account. I would like to know where can I see the offset account for Freight account.
    Pls advice me.
    Thanks, Raghu.K

    Not sure what you are looking for, but if the invoice has Frieght accounting, offset account will be Receivable account which you can find in the transaction type window as well.
    In simple advance invoice, Receivables account Dr and rest of the accounts Cr.
    Thanks
    Nagamohan

  • Offsetting Entry for Inventory Posting

    Hi ,
    While Working on Automatic Postings - Offsetting Entry for Inventory Posting
    can any one explain me what are all General modification ,valuation modification entries made ?
    What are all General Valuation Class applicable for GBB Entries & give me the G / L account details where the entries will be posted
    Please give me solution on this
    Thanks & Regards,
    Pioneer

    Refer belo link this may give some idea
    http://d.yimg.com/kq/groups/54256/740187646/name/SAP_FI_MM_SD_integration_20090615.pdf

  • Dynamic Texts from Bex ( for Key Figures ) not coming to WEBI Query

    Hi Gurus,
    We have a Query in BEx : Each  Key figure column text changes dynamically - Like based on Present month
    it will Display Month +1 Month +2  up to Month +12.  Used  dynamic Text variables .
    But when i created the universe and Webi report , i am missing the text in the column for Key figures .
    How should i get the column text in Webi which is same as in Bex : Points will be awarded for helpful
    answers.
    Thanks
    Magge

    Hi,
    text variables with replacement path are supported in BO4.0, see following document: SAP BusinessObjects BI4 - Supported BEx Query Elements
    As an example after entering 2012 in the prompts window, the name of the corresponding key figure will dynamically change:
    After refreshing and selecting 2013, the column name will update:
    Im not sure though if this is the case with unv universe access to BEx queries.
    Best regards,
    Victor

Maybe you are looking for

  • My new icloud acct on my imac is duplicating entries in calendar from my ipad; how do I get rid of the duplicates and how do I get one calendar to be the main one to start with

    I've just installed Mavericks on my iMac and now my calendar has duplicate and now sometimes tripled events by syncing with my ipad mini regardless of whether the item already existed in the iMac calendar already. How do I remove the duplicates? It w

  • Which printer brands work best with Mac?

    Well, it sounds like my HP LaserJet 3015 will not duplex with my new Mac (only with PCs, I guess), so I am going to need a new printer. Does anyone have suggestions on which brands of printers work well with the Mac? Thanks in advance...

  • J2IUN

    Hi Experts, We have made vendor rejection invoice thru J1IS, cenvat clearing and excise duty payable entries are very much OK. Excise Invoice No. is xxxxxxxxxx But when we are utilizing duty thru J2IUN. No excise invoice is visible. Also when we pres

  • Region as repeating  header

    I have a set of fields in the first region of one of my pages that the user would like repeated at the top of every print previewed/printed page. Is this something that can be done in HTMLDB?

  • Select Multiple Values in Form 6i

    I'm developing an application for internal audit division there is a field called "root cause" i created a button ,,once open it shows all fields inside a seperate table called roots I want the user to be able to choose multiple values and once he co