Bash 4.2.008-1 does not source /etc/bash.bashrc.local

I don't know if this was intended change or not but it seems that /etc/bash.bashrc.local is no longer sourced by default. All the global alias that I had set there are no longer being set. Was /etc/bash.bashrc.local depreciated (if so where is the new place for such aliases) or is this a bug?

Allan wrote:/etc/bash.bashrc does not source /etc/bash.bashrc.local by default. You can either put your alias in /etc/bash.bashrc directly or do the sourcing yourself.
Hmmm, you are right http://projects.archlinux.org/svntogit/ … 657ba94213
Last edited by karol (2011-05-01 00:03:02)

Similar Messages

"File does not exist: /etc/apache2/htdocs/ABC/script" why?

Hey all,
on Linux error.log I go:
"File does not exist: /etc/apache2/htdocs/ABC/script" when I try to use the browser connecting to system. Why?
Any help is fine.
Thanks a lot in advance and best regards
Michael

get it myself
ip adress in wgate config has to be changed to default

MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

Hi s.cheslik,
It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Spinning beach ball in menu bar, sys pref does not work etc

Since last 2 days I have the following problem with Macbook:
1. When i hover the cursor over the menu bar, the beach ball appears. this is for the Mac menu items such as Airport, Spotlight, Fast switching, time & date and also for iStatmenus. However, Little Snitch menu bar indicator is not affected
2. Sysprefs also does not work. It opens up and immediately the beach ball appears and I can't click on any of the sys preferences
3. If i try to watch a video, then the video will not display, though the progress indicator will happily be progressing away (QT, VLC etc)
4. When i run in Safe mode, then everything seems to work ok (at least the menu bar, though the video part still doesn't work)
5. And also in Normal mode, Safari/Netscape Navigator/Camino et al hang & the beach ball appears, but in safe mode they work ok though very sluggish.
6. Though i can't be certain, I think all these problems began after iTunes crashed on me while running a podcast (?)
I have tried everything; repair prefs and repair disk, have run Tinkertool system2 to see if that would help but to no avail. I even downloaded and installed OS X 10.6.7 Combo update-didn't do any good.

I have been trying to deal with the same problem for the last week.
My machine is a MBP 17" 4 GB 2.6GHz, 250 GB alluminum.
1) I've immigrated my whole user apps and doc files to an IMAC 20" 2GB 2.66GHz 350 GB, and the system works just fine on the IMAC (I am using my system that used to be in the MBP right now).
2) I've over written everything on the HD with zeros and have done a clean install of SNOW LEOPARD on my MBP, but as the system got loaded, already before any working files or app files have been reinstalled, the spinning beach ball appears on the upper RIGHT portion of the menu bar and makes the system inoperable.
3) Done system update and made it into a 10.6.8 but the problem persists.
I've basically done what Ravindra had tried.
Please HELP.

DW CS5 does not want to accept only local server

Hi there.
DW CS5, PHP & mySQL.
I want to set up a site on my localhost, but DW does not want to accept a localhost only? It makes an orange star next to "Servers" in the site setup.
Am I doing something wrong? Please advise.
Regards,
Deon

Sorry, forgot to mention: Windows 7 and I have EasyPHP http://www.easyphp.org which is loading PHP and mySql for me.
Regards,
Deon

Startup scripts in rc3.d not sourcing /etc/profile

I'm trying to set some global parameters for the entire system e.g. JAVA_HOME
I have placed these in /etc/profile
If I login in as whoever /etc/profile is sourced.
However when the system boots up /etc/profile is not sourced before a startup script e.g. /etc/rc3.d/S99xxxx is called
Why is this and where can I set global parameters so that they are visible in the startup scripts and for anyone logging in etc.?

/etc/profile (and $HOME/.profile) are not normally sourced by non-interactive shell invocations.
Modify the script to source it explicitly if that's what you want.
Darren

Apple Mail 8.0 does not display email body for local folders

Last week I upgraded to Yosemite on a 2013 Mac Air. The upgrade went smoothly, but now I notice that all my mail on my local folders (i.e., not my gmail account) is missing the content of the message. New mail filed after the upgrade displays fine and messages filed prior to the upgrade that were sent from me, display fine, but all mail received and filed before the upgrade is blank except for the header. I tried to move a message thinking it might force Mail to identify a problem...and it does. It gives me the message "The message '<MESSAGE TITLE>' could not be moved to the mailbox '<DESTINATION FOLDER>'. Couldn't load body for <MFLibraryMessage:0x600000584780, library id:2172 conversationID:1224 mailbox:2010 <SOURCE FOLDER>"
I have scoured the web for solutions, and there are similar symptoms regarding Apple Mail and IMAP accounts, but my IMAP mailboxes display fine.
I made a TimeMachine back up before the upgrade, so I could restore the old OSX (Mountain Lion) and try again, but I'd love to find an easier solution.

Hi there,
ok now I found a solution:
Navigate to the folder which contains the local mailboxes as MBOX-Files. ~/Library/Mail/V2/Mailboxes/
Locate the MBOX-file which contains the messages which are not displayed.
In my case I tried to access mails from "Empfangen" and "Gesendet" so I copied over those two MBOX-files to the desktop.
Now go to mail.app and select import message box
In the following context menu select "import files from Apple Mail" (cuz Apple Mail MBOX-files are not standard MBOX format)
Import the content.
After import drag your messages from the imported folder to the original folder.
done!
I hope that helps someone who has the same problem.
Greetings

Quicktime does not open, etc.

ok, when i go to open Quick time, it doesn't open, instead, a window ALWAYS pops up saying: "Quicktime player has encountered a problem and needs to close. We are sorry for the inconvenience." How do I solve that problem?
Also, when i open the "add or remove programs" window, quicktime doesn't appear on the list(this is under "change or remove programs"), why is this?
I would appreciate it very much if someone could tell me the solution to these 2 problems. Thanx =)

It would seem to me that the solution would be that you have to remove QT manually from the computer then download and install a new version.
I really don't see doing a repair myself to get the exsisting QT running. For QT to not appear in the add\remove control panel would appear to me that a registry key was deleted, I don't know how else it would have been removed from the control panel.
You might also want to run this
http://support.microsoft.com/kb/290301/)

Obtain a primary token for a user who does not have permission to logon locally

I would like to know whether it's possible to obtain a primary token for a user who doesn't have permission to log on locally. If yes, what the recommended way is for doing that.
I called LogonUserW with logon32_logon_network logontype for user which is not allowed to logon locally. It returned impersonation token. I called DuplicateTokenEx to create primary token but it still returned impersonation token.

A Network Logon is always going to return an impersonation token. This is by design.
A Batch or Service logon would return a Primary Token. The user would need the corresponding right to return these 2 types of token. Typically, all users are allowed to generate a Network Token (Impersonation Token) but as you have discovered
it has limited usage which is by design.
thanks
Frank K [MSFT]
Follow us on Twitter, www.twitter.com/WindowsSDK

The installer does not create /etc

Trying to install Arch but the installer won't create any /etc folder on the mount... (/mnt/etc). So when I get to the point where I'm supposed to edit all the settings, none of the files exist...
Anyone have a solution?
-X-

I'm not sure if this has anything to do with your problem but I had a similar issue when installing arch on a laptop for a friend. I was using Archlinux-i686-2007.08-2.ftp.iso and all the conf files were empty. I tried installing three or four times and always the same thing. Then I downloaded and used Archlinux-i686-2008.03-1-archboot.ftp.iso and everything installed fine.

LDOM dladm does not show other interface.

Create another vnet1 on LDOM (ldg0). But dladm does not show it. There are entries in path-to-inst for it and I was able plumb interface.
bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
vnet0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.2.100.77 netmask ffffff00 broadcast 10.2.100.255
ether 0:14:4f:fb:32:a
vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 192.168.30.30 netmask ffffff00 broadcast 192.168.30.255
ether 0:14:4f:fb:6c:99
bash-3.00# dladm show-dev
vnet0 link: unknown speed: 0 Mbps duplex: unknown
bash-3.00#
Yet dladm does not show device. What have I done wrong?
Here the ldm binding info for just networking
# ldm list-bindings primary (network only)
VSW
NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE
primary-vsw0 00:14:4f:fb:1d:38 e1000g0 0 switch@0 1 1 1500
PEER MAC PVID VID MTU LINKPROP
vnet0@ldg0 00:14:4f:fb:32:0a 1 1500
vnet1@lqwest 00:14:4f:fb:b0:34 1 1500
vnet2@ldg0 00:14:4f:fb:6c:99 1 1500
# ldm list-bindings ldg0 (network only)
NETWORK
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet0 primary-vsw0@primary 0 network@0 00:14:4f:fb:32:0a 1 1500
PEER MAC MODE PVID VID MTU LINKPROP
primary-vsw0@primary 00:14:4f:fb:1d:38 1 1500
vnet1@lqwest 00:14:4f:fb:b0:34 1 1500
vnet2@ldg0 00:14:4f:fb:6c:99 1 1500
NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
vnet2 primary-vsw0@primary 1 network@1 00:14:4f:fb:6c:99 1 1500
PEER MAC MODE PVID VID MTU LINKPROP
primary-vsw0@primary 00:14:4f:fb:1d:38 1 1500
vnet0@ldg0 00:14:4f:fb:32:0a 1 1500
vnet1@lqwest 00:14:4f:fb:b0:34 1 1500
It appears to be working, but is this correct since dladm does not show the vnet1 interface?

I had the same problem. SUN support recommends latest kernel patches. That solved my problem.

I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook. ICloud syncs to my iphone fine both ways.

I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar. They have stopped syncing...mostly.
Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine. But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar. If I reboot the computer, the iCloud data shows up.
Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
All syncing works with my iPhone.
I have signed out of iCloud on PC. I have stopped syncing and re-started. No change.
I have an .aplzod folder for iCloud. I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
Any help would be appreciated. Curious that Outlook will upload to iCloud but not receive downloads unless I reboot. However, rebooting does not download the missing Contacts.
Jim Robbins

Hi Jim!
You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
Completely close and reopen the iCloud Control Panel.
If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
Turn iCloud Calendar off and back on:
Close Outlook.
Open the Windows Control Panel:
In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
Open Outlook and test to see if the issue has been resolved.
Ensure the iCloud Outlook Add-in is active within Outlook.
Outlook 2010:
Open Outlook 2010.
Click the File menu.
Click Options in the left panel of the Outlook window.
Click Add-Ins in the left panel of the Outlook Options window.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
Open Outlook 2007.
From the Tools menu, choose Trust Center.
Select Add-ins from the left column.
Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thanks for using the Apple Support Communities!
Cheers,
Braden

F-03: Amt in doc currency & local currency does not tally

Hello Friends,
When doing clearing using F-03 for GL Account 137500 in SGD (document currency), The amount
does not tally with Amount in local currency (USD) and the selected items
clearing lines not generated automatically. Why is this happening.
I found that this is not due to exchange rate
Please help to resolve.
Ramu

There are too many questions..let us take it one at a time
a. I am using tcode f-03 for clearing GL Account - OK
b. When i process the open items and select the items for clearing OK
c. When posting the difference of the selected items OK
d. the amount in local currency(USD) does not tally with the amount in document currency (SGD)
Response: This will not as the exchange rates are not 1:1 that is One USD will not get you One SGD. The difference will remain.
e. this is not due to the exchange rate, for example the figure in amount in local currency is 100 USD, the figure in the field amount in document currency is showing as 300 SGD,
Response: In all likelihood look at the GL master data `(FS00) and check the values in the `Control Tab`
f. and also automatic generation of lines (debit & credit) for the sum of selected open items are missing
Response:* As in (e) please check if the line item display is checked in the same tab.
Cheers
tkvishwa

ABAP WebDynpro - ArchiveLink - PDF Error: "File does not start with..."

Hey community,
I have a WebDynpro application in which I want to show a Archive document.
I'm using FM 'ARCHIV_GET_TABLE' and then FM 'SCMS_BINARY_TO_XSTRING'.
But I only get the error message: (see also attached)
File does not open with "%PDF-".
Local\EWH...
Attachment two shows, how the data is stored in TOA03.
Document type is FAX .
I tried several FM and nothing worked.
Does anyone have an idea?
Thank you very much in advance.
Florian

Hi Florian,
I don't think you need to use FM SCMS_BINARY_TO_XSTRING.
Just try to make of your binary output table from ARCHIV_GET_TABLE an xstring by concatenating all lines into one xstring.
Regards,
Julien

Cannot source /etc/profile from within the PKGBUILD anymore

Hi,
Short story: the command
source /etc/profile
within the build() section of my PKGBUILD now returns a build() error. It used to work before, is there a reason for this? Should it be executed in another section than build()? (Note source /etc/profile works properly in console, within the build directory)
Long story:
I need to use $JAVA_HOME in my PKGBUILD (to patch a lua source file with the current JDK path, which can be detected with $JAVA_HOME. Patching is done with a sed command). However, if java-environment is installed for the first time (as a makedepends) along with my package, then I need to source /etc/profile first to set the $JAVA_HOME environment variable, before being able to use it within my build() section. Otherwise it is not set yet and building fails.
Many thanks for your help.
Last edited by zebulon (2012-12-28 14:57:23)

Hi,
Many thanks for the advice. I was unclear though: I maintain the aacskeys package in AUR, not the lua package. However, the file I am patching in aacskeys is named premake.lua, used for the project file generator premake.sourceforge.net.
I'll try your first suggestion, since this is the only one which may work without touching the system. Another alternative would be to directly source the /etc/profile.d/jdk.sh file. EDIT: nope, because there could be openjdk6.sh instead. I really need to be able to source the correct file. The maintainer of opencascade uses:
if [ -z $JAVA_HOME ]; then
[ -e /etc/profile.d/openjdk6.sh ] && source /etc/profile.d/openjdk6.sh
[ -e /etc/profile.d/jdk.sh ] && source /etc/profile.d/jdk.sh
fi
which is efficacious but less generic.
Besides, is it normal that we get this error code, since the Arch documentation only recommends to set LANG in /etc/locale.conf? SHould I report it as a bug or request a design change for /etc/profile.d/locale.sh there (as suggested in your (b) entry)? I am asking this because my PKGBUILD is not the only one to use this trick, and this problem breaks them all.
Thanks.
Last edited by zebulon (2012-12-30 06:14:58)

Bash 4.2.008-1 does not source /etc/bash.bashrc.local

Similar Messages

Maybe you are looking for