Bash prompt changed from "macbook-pro" to "fdrs-ipad"

Normally in bash my prompt began "macbook-pro" after trying to use AirDrop it is now "fdrs-ipad". This doesn't seem to have affected anything yet but I am unsure how this happened or what it may do eventually. I googled around to try to find solutions but I couldn't find anyone with a similar problem. Anyone have an idea what happened and how I can change this back?
Thanks!

sudo scutil --set HostName whatever-you-want
If that doesn't work, the hostname is being set to the result of a reverse lookup of your IP address on a local DNS server, most likely your gateway.

Similar Messages

AirPlay from MacBook Pro to an iPad?

Can AirPlay be used to mirror a MacBook Pro (OS X10.9.3) to an iPad running iOS 7.1?
The support material from Apple (and most of the community discussions) concern getting Airplay from a Mac computer or iOS device to run to an Apple TV.
But there are some support/discussion elements that also suggest it would be possible to do mirroring from a computer to an iOS device.
FYI - I don't have an Apple TV. And the Airplay icon does not appear in the Control Panel of my iPad. My MacBook Pro Display Settings shows the capacity for AirPlay display, but does not detect any devices. I've not installed any third party "air" mirroring applications.

Hello 25th Floor,
Thanks for using Apple Support Communities.
From your post I understand that you're wanting to AirPlay from a Mac to an iOS device. AirPlay mirroring from your Mac is designed to only function with an Apple TV. Please see the following article for what is required to use AirPlay Mirroring in OS X.
Requirements for AirPlay in OS X
An Apple TV
Apple TV (2nd generation or later) with software update v5.0 or later.
AirPlay turned on in the Settings menu of the Apple TV.
A supported MacAirPlay Mirroring in OS X takes advantage of the hardware capabilities of recent Macs to deliver high frame rates while maintaining optimal system performance. The following Mac models support AirPlay Mirroring when using OS X Mountain Lion or later:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (Late 2013 or newer)
Which Mac do I have?
A network
AirPlay Mirroring requires either a Wi-Fi (802.11 a/g/n) connection or an Ethernet connection to the same local network that your Apple TV uses.
About AirPlay Mirroring in OS X
http://support.apple.com/kb/HT5404
Take care,
Alex H.

HT4623 How do I copy photo and music from MacBook Pro to Mini Ipad?

I have a MacBook Pro that has my collection of Photos and Music. I recently bought a Mini Ipad and wanted to copy/transfer some of my Photos and Music from the MacBook to the Mini Ipad. Have tried but cannot perform drag and drop since the Ipad is not showing up in the Finder app.
Looked into the Lightning to 300 cable (for my Iphone touch or Ipod) but the adapter has a female connector for the 300 and don't know how I can attach my Iphone or Ipod to transfer data with the other end of the cable is USB or AC .
Thanks

The iPad won't appear in Finder, you should be able to sync content by connecting it to your computer's iTunes -do you have iTunes installed on your Mac, and your music library in it ? You can add music to iTunes via File > Add To Library
With iTunes 11 on your Mac you can enable the left-hand sidebar via option-command-S. Then select the iPad on that left-hand sidebar and use the Music tab on the right-hand side of iTunes to select and sync your music to the iPad's Music app.
Syncing music : http://support.apple.com/kb/HT1351
Similary to sync photos use the Photos tab on the right-hand side of iTunes. There is some info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
You can't transfer music from an iPod or iPhone to an iPad

Slow photo streaming from Macbook Pro to new Ipad

How is it that I can stream 1000 photos in minutes with a Mac Book Pro to an Iphone but it's literally taking all day to stream less tha 300 pictures from a mac book to the new Ipad?
Anyone have any comments on this?

I wasn't saying there was anything wrong with the file, just that when you compare performance to other things you stream, you need to remember it probably uses 2 to 3 times the bandwidth on your network.
Have you looked for interference, Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

How to transfer photos from MacBook Pro to my iPad 3 ????

Help I really like to know it could be done first of all and how to transfer my pictures from my Mac to my new iPad 3????? Please help....thanks

Connect the iPad to the Mac and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
Click on the "Sync Photos From" heading and select the folder from which you want to sync your photos. Usually on a Mac it would be iPhoto
Click on all of the albums, events, faces, etc that you want to include in the sync.
Click on Apply in the lower right corner of iTunes

Can not set up messages to send from Macbook Pro to Ipad

Hello everyone,
I am having trouble sending from MacBook pro Messages to Ipad. If I send a message from Ipad, it shows up in Macbook, however if I try to send from Macbook, it tells me "Your message could not be sent. Your message account is not signed in " SO I press sign in and a dialoque window pops up and I can see that I am actually signed in with my apple ID, and the acount is enabled. However it also shows that "Messages Inactive" and when I go to Messages menue, I can not even change my status.
I have checked the firewall, its off. Please enlighten me, I am starting to feel like I am loosing it with technology

I am having the same problem. Sometimes it works and sometimes it doesn't. I called apple restored my phone to its original and it did not work :-( Now it seems like it worked for a bit than stopped again. Now I have to contact Apple again to set up an appointment at an Apple store because it may be an issue with my phone. I have only had it for a week and half!

Just migrated using time machine from MacBook Pro to older Macbook. iPhoto 9.4.3 won't open. Tried reinstall - no change.

Just migrated using time machine from MacBook Pro to older Macbook. iPhoto 9.4.3 won't open. Tried reinstall - no change. (Mac OS X 10.7.5)

Did you migrate the app from Time Machine? Reinstall it.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
The reference to NovaMedia is that there is the remanant of an older app in there somewhere that won't run on 10.7
Regards
TD

What do I need to do to get Adobe Reader to upload; changed a MacBook Pro to OS 10.7.5 from 10.3?

What do I need to do to get Adobe Reader to upload; changed a MacBook Pro to OS 10.7.5 from 10.3?

Thank you for responding. I am sorry I can not pursue this issue now. I have a flight to catch. When I am able I will get back to you. Thanks again, hb
AdityaKalania <[email protected]> wrote:
AdityaKalania http://forums.adobe.com/people/AdityaKalania created the discussion
"Re: What do I need to do to get Adobe Reader to upload; changed a MacBook Pro to OS 10.7.5 from 10.3?"
To view the discussion, visit: http://forums.adobe.com/message/5259353#5259353

Can i change the macbook pro processor from 1.83ghz to 2.16ghz?

i saw some forum that the use a mac mini core solo change to core duo.that was very impressive.Hope that i also can change the macbook pro with sort kinda way......does anyone have any idea about it.because this might be a very good news for those mbp who slower than 2.0ghz
http://www.xtremesystems.org/forums/showthread.php?t=91459

i saw some forum that the use a mac mini core solo
change to core duo.that was very impressive.Hope that
i also can change the macbook pro with sort kinda
way......does anyone have any idea about it.because
this might be a very good news for those mbp who
slower than 2.0ghz
http://www.xtremesystems.org/forums/showthread.php?t=9
1459
Like Nick said, it is soldered in... Good at soldering? He he...
William

Help get rid of Bing search engine from macbook pro os 10.7.5

Help me get rid of Bing search engine from macbook pro os 10.7.5
fmartn67

You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that the Version is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password. Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller, while lying about what it does. As he knows and intends, the uninstaller does not completely remove the malware.

How do i transfer my data from macbook pro to iMac?

i just bought a iMac. How do i transfer my itunes library, photos, files via bluetooth from macbook pro to my iMac? Much thanks for your help!

I believe that when you boot your computer for the first time and you are following the onscreen instructions you are prompted whether you want to transfer data from an old mac or PC. If you click 'transfer from an old mac' and follow the onscreen instructions, this may work.
If you have already skipped this step you could use iCloud to transfer data. If you make sure that everything you want to transfer is synced in iCloud, this may also work.

Migration from Macbook Pro, settings are macbook pro

I have migrated my data from Macbook Pro Retina using migration assistance. During the process I didn't allow it to override my current profile, or something. Now when I use terminal, it says
Name-Macbook-Pro:~ name $
shouldn't it say
Name-Mac-Mini:~ name $
instead?
Also, when I'm going into my apple store, it has applications for enhancing macbook pro retina experience. How do I change all this?
Thanks!

Nevermind, I found out that it was because my Device's name was changed, and in order to change that, just go to shared folder in the preferences and it can be changed there.

Print Quality Bad from MacBook Pro

From my G4, OS 9.1, printing to my Brother 2070N has always been terrific. Now, from MacBook Pro, 10.5.6 the text looks bad, like a coarse screen has been applied. I see nowhere in the Page Set-up to check that the correct resolution has been selected. No longer is there a choice of 300 or 600 dpi.
Is this a driver issue and how to rectify. Thanks.
Al B

Yes. The correct printer driver is selected but there are no options to change resolution. In 9.1 there are radio buttons to select 300, 600 and 1200 DPI. Nothing in Page Set-up in OS 10.5.6 unless I'm just missing something. It's as if its defaulted to a lower resolution. Will installing the complete set-up from Brother change this or am I forced to use the CUPS version?
Thanks,
A

HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. can anyone help. I have been able to print on this printer for

I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

Xerox 8560DN pauses when printing from MacBook Pro (Maverick update)

Xerox 8560DN pauses when printing from MacBook Pro using the printer connected to a Windows XP machine. The printer is fully shared, however when I print, it goes to PAUSE. It displays...Ready to print > Printing > and it pauses.
The Maverick update has changed lots of unecessary setups. What was perfectly working before, not it causes problems.
Any solution?

Carolyn Samit,
I did it several times without any success. I think that the Maverick update damaged something.
I also deleted, added and change all settings... Not working. Xerox does not have a Maverick driver available, but today apple released a Xerox printer software update (Version 2.3). After the installation, nothing changed.

Bash prompt changed from "macbook-pro" to "fdrs-ipad"

Similar Messages

Maybe you are looking for