Basic Configuration and Support Pack Stacks
Hi everyone,
Just a general question about the Solution Manager 7 "basic configuration" stuff.
Are you required to perform the "Basic Configuration" everytime after you apply a new support pack stack to solution manager?
Or is it a one off, after the initial installation?
Cheers
Shaun
Hello,
https://websmp109.sap-ag.de/~sapidb/011000358700001927282008E has some information about your question.
Only some parts of SOLMAN_SETUP must be run everytime, other parts are optional. For an overview please visit the link.
Best regards,
Miguel Ariñ
Similar Messages
-
Automatic Transport Requests and Support Pack Stacks using CHaRM
Hi Experts,
Could you please give your valueable inputs on below Requriements :
1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
would be helpful if any one could send the documentation on above requirements.
Regards,
VijaysateeshHi,
>
> 1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
Yes. You can schedule a periodic job (say for example daily 6M) to import all released transport requests from QAS to PRD of a maintenance cycle/project. This is the task "Import Transport Request(Backround)" given in task list (tcode-SCMA) of a maintenance cycle.
>
> 2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
I haven't done this. But this is the task "Import Support Package" given in task list (tcode-SCMA) of a maintenance cycle.
I hope there is no specific documents for these. It's the same documents related to ChaRM.
Regards
Sanjai -
Setup SM 4.0 to allow me to approve support packs/stacks for download
I need a doc or a procedure to setup Solution Manager for approving support packs/stacks for download. I havn't had much luck finding a good one.
Have you configured Maintenance Optimizer , if not use the following link to see the documentation for configuring MOPZ
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689877&
From the above link click on <b>SAP Tutor on Maintenance Optimizer</b> this will show you how to use Maintenance optimizer and <b>Step by Step Configuration of Maintenance Optimizer SP Stack 09</b> will help you to configure Maintenance Optimizer. ( scroll down to bottom to see the links)
Thanks
Prince Jose -
Errors in Runtime workbench after support pack stack 12
We have installed support pack stack 12 and now the runtime workbench - component monitoring is not working. I get a page of errors. here are some of the errors
Unknown error: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:250: cannot resolve symbol symbol : method getTestModel () location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel CompTestModel testModel = cmMainModel.getTestModel(); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:283: cannot resolve symbol symbol : method getTextFromCore (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_tray_0.setTitle( cmMainModel.getTextFromCore("component_monitoring") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:391: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_0.setValue( cmMainModel.getText("all_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:415: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_1.setValue( cmMainModel.getText("red_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:439: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_listBoxItem_2.setValue( cmMainModel.getText("redYellow_lbi") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:486: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_0.setText( cmMainModel.getText("go_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:647: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_1.setText( cmMainModel.getText("tree_view_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:662: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel String label = cmMainModel.getText("switchToTableView"); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:703: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_button_2.setText( cmMainModel.getText("ccms_button") ); ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1117074148914.java:808: cannot resolve symbol symbol : method getText (java.lang.String) location: class com.sap.aii.rwb.web.componentmonitoring.model.CmMainModel jspxth_hbj_group_1.setTitle( cmMainModel.getText("searchResults_group") );
I have done the java support pack again to make sure it was installed properly.
Thanks,
Dede LoganWell after the SAP XI server was restarted and I tried to go back into the runtime workbench and then into the Component Monitoring I am getting another error.
Unknown error: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_jsp_error1117123949279.java:74: setFeedbackToUser(com.sap.aii.rwb.web.util.Feedback) in com.sap.aii.rwb.web.application.model.AppMainModel cannot be applied to (com.sap.aii.rwb.util.web.Feedback) appMainModel.setFeedbackToUser( ^ /usr/sap/XI0/DVEBMGS70/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_jsp_error1117123949279.java:79: setFeedbackToUser(com.sap.aii.rwb.web.util.Feedback) in com.sap.aii.rwb.web.application.model.AppMainModel cannot be applied to (com.sap.aii.rwb.util.web.Feedback) appMainModel.setFeedbackToUser( ^ 2 errors .
does anyone know how to correct this error or what the cause of the error.
dede -
What is the best way to apply Support Pack Stacks among satellite systems
Hi,
We have differenst systems liek R3, SCM,CRM,XI, BW and EP. We would like to apply teh support pack stack 12.
Which land sacpe need to be applied with the stack first?
R3 or other satellite systems? Is there any recommendation available from SAP on this?
Thanks in advance
Jnaneswar.PThanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this. -
Anywhere to find newly added countries in enhancement pack and support pack
Our HR wants to proactively identify the new countries being introduced through enhancement pack and support pack, so configurations such as V_T503Z (country assignment for employee group/subgroup) can be updated accordingly.
How can I find such a list?
Thanks.
JoanHi Qiong
If you have ever tried downloading the notes delivered under CLC or HRSP for SAP-HR Component, you would see that the sub-component names are generally based on country abbreviations example PY-AU, PY-SG etc. Also the country names are mentioned there. So if any new country comes up you would know it from the sub-component name. However, whether you need to configure anything in your system for these new countries depends on the fact whether your client has operations in that country or not and whether your project is supporting that country operations for the client or not.
It is more likely that we keep checking the CLC and HRSP for any new functionalities introduced by SAP for the countries that we are supporting for the client instead of checking for new countries altogether. -
Transport failure in QAS system after support pack stack 9 upgrade
We have a DEV->QAS>PRD ECC system landscape. Recently we upgraded our DEV, QAS and PRD system to support pack stack 9 (with Kernel level 137). After the upgrade, we got transport failure in QAS where it shows pink colored down arrow which shows unable to open import queue when I click on it under stms import overview. If I put back the old kernel (Level 69), transport works just fine. DEV is the TP domain controller. When I run the RTPTEST in QAS, it show sthe follwing info:
RFC Destination
Destination CALLTP_WindowsNT
tp Path E:\usr\sap\QAS\DVEBMGS02\exe\tp.EXE
tp Executable Size: 10.352.432 bytes
RFC Ping Error when opening an RFC connection
tp Call
RFC Link Error when opening an RFC connection
tp Version
DB Connect
Offline Call Error when opening an RFC connection
I will greately appreciate any input to resolve this issue.
ThanksYou need to upgrade two component of your kernel tp and R3trans
Also perform an additonal test with new kernel
cd /usr/sap/trans/bin
tp connect <SID> pf=TP_DOMAIN_<SID_DC>.PFL
If you have issue to connect it means there is some issue with tp tool and/or connectivity
Cheers !
Manish -
hi,
can any body please tell
what is support pack stack?
is it contains patchs for ABAP and JAVA stacks or only for JAVA?
can we patch for java individual component?
i know how to apply through JSPM.
thanks inadvance,
regards,
raju.Raju,
The SP Stacks are sets of Support Packages and patches for the respective product version that must be used in the given combination.
They are for ABAP and Java.
In general, when applying support packages, you always have to apply the complete Support Package Stack.
Patches to a specific Support Package can be installed individually.
For example, if you are on SP Stack 12 and need Support Package 14 for a certain component, you have to apply the complete Support Package Stack 14.
If you just need a patch for Support Package 12 of a certain component, you can just apply the patch, as long as it is Support Package 12.
More details here https://service.sap.com/sp-stacks
Thanks,
Dieter -
Difference between service pack and support pack
Hi,
what is the exact difference between service pack and support pack. Are they same?
The version details presnt in integration builder -> help-> inforamtion of my XI server are as follows :
Service pack: 09
Release: 645_VAL_REL
does it mean that the both support package and service package for my XI server are 09?
thanks in adavance
regards
Jagruthi1. A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features.
http://help.sap.com/saphelp_nw04/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
Service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04 http://XI 3.0
SP13 + 14 - SP05 http://PI 7.0
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09 and so on...
2) Support pack -
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/5bc53f3e0f0228e10000000a114084/frameset.htm
For the ABAP parts of usage type PI, this is the implementation of support packages. For the Java parts, the deployment with the Java Support Package Manager (JSPM) is used.
You can find currently available support packages on SAP Service Marketplace at service.sap.com/sp-stacks.
A description of how to apply support packages is available in SAP Note 879289. -
Difference between Hot Pack and Support Pack
Hello,
Can anyone throw some light on difference between Hot Pack and Support Pack(if there is any) and what is Tax Update Bulletins, do we need to configure for TUBs or what is the SAP HR consultants role is Tubs.
Thanks
CharleneHi,
I believe both (hot pack and support pack) are one and the same.
For TUBS, you can find more information in:
Service Marketplace -> SAP ERP Human Capital Management -> Country Info -> North America -> United States -> Tax Update Bulletins -> Tax Factory 8 -> Tub Downloads
Hope this helps,
Reward points if helpful,
Thank You, -
List of notes part of an EHP1 Support Pack Stack
Hi, is it possible to get a list of SAP notes included in a specific Support Pack Stack in Solution Manager?
Hi,
You can generate a side effect report of the support pack which will give you brief overview of all the changes included in the support pack.
Thanks
Sunny -
Latest kernel realese and support packs
Hi,
Please let me know what is the latest Kernel Realese and Support Pack levels?
Thanks
Asim.Hi Asim,
Please do check the below link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d8838d-cb8f-2c10-7ab8-d1504670fbb8
How to do a kenel upgrade, check present version, how to download-> all have been updated.
Lemme know if I need to add anything else as well.
Kind regards,
Hemanth -
Inits/Deltas during Uprgrades and support packs
How are people handling the deltas and initializations when upgrades and support packs are applied to the source system. We had to delete our delta queues and reload everything!!! I know that's not right. ( At least I hope that's not right!!!). Please advise...
Ye s- you should not have to reload targets a a result of an SP/Upgrade.
When there are changes to the PI_BASIS plugin (extraction from ERP), you need to clear your V3 and Delta queues.
When SAP Service API (internal and BI Data mart extraction) is changed, you need to clear the BW delta queues. This can require two complete extraction and laod processes.
As a matter of practice, we always clear all queues prior to an SP/upgrade.
See the How to... Checklist: Rapid SAP Netweaver 7.0 BI Technical Upgrade document which is where you can fins this info page 11or 12. -
Hi ,
Our system is on SAP_APPL 604 0003 SAPKH60403 Logistics and Accounting
Curretnly which one is the latest support pack available and where do we monitor this regularly . i.e Please provide the patch where we can monitor and continously update with latest SAP support stacks.
regards
Chandresh> Curretnly which one is the latest support pack available and where do we monitor this regularly . i.e Please provide the patch where we can monitor and continously update with latest SAP support stacks.
You have three possibilities:
1. Check manually using
http://service.sap.com/patches
--> Support Packages and Patches - Entry by Application Group
--> SAP Application Components
--> SAP ERP
--> SAP ERP ENHANCE PACKAGE
--> EHP4 FOR SAP ERP 6.0 / NW7.01
--> Entry by Component
--> Central Applications
--> SAP APPL 6.04
--> Support Packages
2. create a maintenance optimizer task to update your system and check which new SPs are available
3. Check
http://service.sap.com/sp-stacks
--> SP Stack Schedule
And look when SP4 will be available (SAP EHP4 for SAP ERP 6.0)
The first approach is good for a quick look but it's not advised to separately install only one component. There may be dependencies to other components and you will have then hard time to satisfy them manually.
According to the schedule SP4 for SAP_APPL 604 is available in second week of october.
Markus
Markus -
Difference Between Patches And Support Packs
Hi Experts,
I have one doubt,
1.... I want to Know Difference Between the Patches And the Support Packs
2...What is the Use of these Two??????????Is it Necessary to Apply these Two??
I asked This Question in Number of Queries...................
Please Let me Know All the Above Mentioned Queries
Regards
KhannaThank you for ur Quick Reply Satish.
And one more thing i want to clarify with you ...
Here i am going to Install XI 3.0 with WAS 6.20.
1......I installed j2sdk1.4.2_12
2......Installed Oracle 9i
<b>Question1:-</b> Do i need to Patch it to Oracle 9.2.0.7.0?????????
Or I can do it Later Also???????(At Present I dont Have it)
I Installed Up to Here.
3.....After this I wil Install WAS 6.20 with ABAP + JAVA Stack
( I have Doc for this).......
4....After this I wil Install XI 3.0
I think this is the XI Installtion.....
<b>Question2:-</b> Is this way of Installation is Correct?????
<b>Question3:-</b>After Completion of All these We should do the XI Post Installtion...Right?????
<b>Question4:-</b> When can we Apply the Support Packs And Patches??????? In the Post Installation Or After the Post Installation?????
Please Give me the Right Direction To Install the XI Successfully.......
Helpful ANS Wil be REWARD Points
Regards
Khanna
Maybe you are looking for
-
Iphone 5 battery draining fast
My 22 month old iPhone 5 has suddenly started draining its battery really fast. It loses 70% in 3-4 hours. Nothing has changed in my usage and I haven't upgraded to IOS 7 or 8. My serial number doesn't seem to qualify for the replacement scheme for
-
"Connection timed out" with HttpClient.
Hi, My goal is to consume a web service using Apache AXIS. This web service uses Integrated Windows Authentication. I use IE have configured Proxy server address and Proxy server port using IE's Tools -> Internet Options -> Connections Tab -> LAN Set
-
Hello Gurus, Please look into this SQL> SELECT provider_type, COUNT (DISTINCT p.p_external_prov_id) ct1 2 FROM phcsclaimload.PROVIDERXWALK p 3 GROUP BY provider_type; PROVIDER_TYPE CT1 ACUTE 4384 ANCILLARY
-
Is it possible to install Lion without an internet connection?
I have the Lion Thumb drive but it just pop's up a dialog box saying that it can't download the additional components. What additional components are there? Surely this defeats the point of having an install drive if it still requires the internet t
-
Too late to pay the month ...
I had some technical problems with my bank and I am little late to pay the new month . Who can I inform so Adobe not to close my account . I will pay in few days .