Basic configuration settings need to be done in ABAP-WebDynpro.

Hello Friends,
                     Any Basic setings need to done in the configurator to run WebDynpro-ABAP smoothly, settings like http time out parameter.
Cheers,
Sam

Hi Sam,
The basic FQDN settings need to be done to run the Webdynpro Abap..
Here's the link regarding it,
http://help.sap.com/saphelp_erp2005/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm

Similar Messages

  • IDOC to File Scenario - Configuration steps need to be done in R3 and XI

    Hi Experts,
    I am working with IDoc to File scenario. Can someone please explain, what are the steps or configuration things need to be done in R3 and as well as in XI too.
    Thanks in advance.
    Regards,
    Sree

    Hi Sree,
    I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
    While doing an IDOC -> XI -> File scenario, The Points to noted are:
    1. You don’t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
    2. You import the IDOC and use the same in your mapping.
    3. In this configuration note that you don’t have a sender agreement as you don’t have a sender IDOC adapter.
    If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
    points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
    IDOC -> File scenario ref:
    <a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
    File -> IDOC ref:
    <a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
    To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
    You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
    Also, I would suggest that you go through this blog by michal if any issue arises,
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Also have a look at these forum threads...
    IDOC TO FILE SCENARIO
    idoc to file scenario
    I hope this answers your query.
    Regards,
    Abhy Thomas

  • My client Portals links are working only on intranet, what kind of settings needs to be done to work on internet

    Hi Experts,
    My client Portals links are working only on intranet, what kind of settings needs to be done to work on internet.
    Thanks,

    HI Sree,
    I had the same problem in my client. The solution is you need to publish the URL to the internet and maintain the host name at the hosting server.
    If possible talk with the IT Network guys and they can help you.
    Something that i can help you.
    regards,
    S.Saravannan

  • Settings need to be done for messages through process chains.

    Hi friends,
    Iam trying to send messages through my process chain . I have done the required settings in the process chain to create messages . Now , i came to know that some settings nedd to be done in tcode SCOT to enable the messaging from process chain .
    Can any body tell me the steps to do that , as our Basis guy is not here . Are there any need to install some Interner mail gateways ..
    Thanks in advance..

    Hi Nihuja,
                 After creating node with all details destination and every thing.That will come like  this
               ex : Your Node  name
                             ->   SMTP
    Then double click on the  SMTP -> U can see the Mail port option there u  have  to put 25.
    Regards
    Ramakanth.
    While creating the node  itself u  have to give all the details like  destionn via.(internet  etc......)
    "Assign  points  if  useful"

  • EDI Basic configuration settings for Third party sales

    Dear All,
    Could you help step by step how to configure EDI to send PO automatically to outsourcing company for the Third party sales order.
    Thanks
    CG Balaji

    Hi roberto
    Please send me basic EDI configuration document to my mail id [email protected] this will help me a lot.
    Thanks and regards,
    CG Balaji

  • WLAN Controller basic configuration help needed

    Please advise me for the initial config. of wlan controller. if found following parameters needs to be configured for initial config. of wlan controller.
    Enable Link Aggregation (LAG) [yes][NO]:
    Management Interface IP Address:
    Management Interface Netmask:
    Management Interface Default Router:
    Management Interface VLAN Identifier (0 = untagged):
    Management Interface Port Num [1 to 2]:
    Management Interface DHCP Server IP Address:
    AP Transport Mode [layer2][LAYER3]:
    AP Manager Interface IP Address:
    AP-Manager is on Management subnet, using same values
    AP Manager Interface DHCP Server (192.168.50.3):
    Virtual Gateway IP Address:
    Please advise me what these parameters mean. I'm new to wlan controller.
    Please advise.
    Thanks in advance.

    Enable Link Aggregation (LAG) [yes][NO]: Yes
    Management Interface IP Address: ex - 192.168.1.2
    Management Interface Netmask: Ex- 255.255.255.0
    Management Interface Default Router: 192.168.1.1
    Management Interface VLAN Identifier (0 = untagged):(Hit enter no need to fill this)
    Management Interface Port Num [1 to 2]:1
    Management Interface DHCP Server IP Address:
    AP Transport Mode [layer2][LAYER3]: LAYER 3
    AP Manager Interface IP Address: ex - 192.168.1.3 (same subnet that of Management interface)
    AP-Manager is on Management subnet, using same values
    AP Manager Interface DHCP Server (192.168.50.3):
    Virtual Gateway IP Address:1.1.1.1

  • DAQmx simulation not happening in MAX 4.5. any configuration manipulation needs to be done.?

    I'm not able to simulate DAQmx on MAX 4.5.1 on right clicking the Devices and interfaces in MAX it shows create new but DAQmx does not show up. The installed DAQmx driver is 8.6.1. Is it that anything needs to be changed in the administrative tools?
    please suggest.
    Thanks 
    Rakesh

    Hi Misha,
    Well in the list there is no such option as simulated DAQm.
    On the right click Create new shows up as seen in MAX1.jpg
    and on click of Create new there are no such simulate options see MAX2.jpg
    Attachments:
    MAX1.JPG ‏99 KB
    MAX2.JPG ‏102 KB

  • Configurations that needs to be done at the SAP R/3 end

    Hello All,
    I am doing a File to RFC Scenario. Just like doing a File to IDOC Scenario, I have to maintain the TCODE "SALE" as in create the Logical Systems and attach it to the Clinet and also the RFC Destinations and Distribution Model, Partner Profiles and the Ports.
    Can some one guide me through the Steps which I should follow for the RFC. I am Using the BAPI " BAPI_GOODSMVT_CREATE".
    The RFC destinations are already maintained and Logical Systems are already created.
    <b>What about the Distribution Model and the Partner Profiles and the Ports.</b>
    How do I do that. Any usefl answers will be awarded points. Please let me know.
    Thanks and Best Regards
    Chakra and Somnath

    hi,
    http://help.sap.com/saphelp_nw2004s/helpdata/en/33/c6e63b60c25767e10000000a11402f/frameset.htm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    and check the documentation of this BAPI also.
    Regards,
    Sachin

  • Regarding Configuration Settings for invoice tranfering

    Hi,
           I am new to MM.I want to be transfer Invoices from MM to SRM.Apart from this where i need to configuration settings has to be done(for different vendors).
    Can any one give me the solution for this?
    Thanks in Advance,
    regards,
    kishore.
    Edited by: kishore kumar on Sep 22, 2008 6:34 AM
    Edited by: kishore kumar on Sep 22, 2008 6:37 AM

    TCODE:mrm2 need to set config settings

  • Configuring settings for proxy scenario.

    Hi experts,
    I have SAP R/3 and XI system, need to execute a proxy scenario.
    What all configuration settings have to be done for the proxy part in both XI and SAP system.
    Please help with links to some good blogs.
    Thanks,
    Younus

    Hi,
          There are two Types of proxies which can be done by ABAP or JAVA
    ‘client’ proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context).
    ‘server’ proxy is used by an application to receive messages from sources outside itself (again, normally the IS in this context).
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
    ABAP Proxy
    How do you activate ABAP Proxies?
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ABAP Proxy Runtime
    http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
    ABAP CLIENT PROXY
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    ABAP SERVER PROXY
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies. [original link is broken]
    To test a connection - /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Client Proxy - /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    Server Proxy - /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    XI: Debug your inbound ABAP Proxy implementation
    Testing proxy - /people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
    JAVA Proxies:
    Asynchronous inbpund java Proxies
    /people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
    Hi,
    Proxy Generation- For ABAP and Java proxy, create a Message Interface and then generate a proxy for that message interface.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
    More on Java Proxy-
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d4db211-0d01-0010-1e8e-9b07fc2113ab
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
    ABAP Proxies:
    Integration Builders through proxy server (Part - 2)
    /people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    ***Assign points if you found helpful
    Regards.,
    V.Rangarajan

  • What is the configuration settings of invoice split

    hi,
    sap gurus,
    can any body explain how the settings will be done for
    invoice split
    and
    collective billing
    regrds,
    balaji.t
    09990019711

    Dear balaji
    1)  Invoice split
    No configuration settings needed.  If any of the following datas are different in Sale Order / Delivery, then you will get Invoice split
               a)  Payer
               b)  Payment Terms
               c)  Inco Terms
               d)  Shipping Conditions
               e)  Actual GI Date (from delivery)
               f)   Exchange rate at header level
    2)  Collective Billing
    It is same as above.  Run VF04 and ensure that the header datas are same so that you will get one invoice.
    thanks
    G. Lakshmipathi

  • Portal basic configuration

    hi all
    I'm a student, and an oracle portal beginner. I just got an internship in an IT company, where my first task is to create an portal. There is an application server already installed here, with BI, portal, wireless... I was told that the portal was installed (checked as an option during AS installation) but it is not confugured. Where should I begin and what basic configuration I need to do in order to start building the portal?

    You can check by taking a look at the ports for each component.
    The portal is actually served by several components. Webcache -> Apache -> oracle portal modules
    Take a look at the portlist.ini file in the $ORACLE_HOME/install direcotry. Pay attention to the webcache port, webcache admin port, and apache (oracle http server).
    Portal should be accessable by going to http://<servername>:<webcache port>/pls/portal with an out of the box configuration.
    Also, to get you started, OPMN (oracle proces smanagement and notification) manages the processes for each component. You can type opmnctl from the command line with no parameters to get help on its usage.
    Most management can also be done through the enterprise manager. It is usually on http://<servername>:1156/ you will have to login with the ias_admin account. You can get the port by typing emctl status iasconsole from the command line.
    This is the same info I started with when i first started learning portal a year ago.

  • ASUS RT-N65U Router - Configuration Settings

    Hi
    Does anyone have the configuration settings needed for an ASUS RT-N65U Router ?
    I've just ordered one as a replacement for my HH3 .
    Thanks
    Solved!
    Go to Solution.

    Installed and all working
    I've email ASUS about the Client status list and if it's possible to rename devices so they make more sense.
    Would look nicer than having the MAC Address or Hostname.
    Apparently this will be  coming in the next firmware release
    Thanks

  • Need to do any configuration settings in BES while implementing BO Mob ?

    Hi All
    We are implementing BO Mobile 3.1 SP3 for BlackBerry devices.We have implemented it and also setup OTA client application delivery and downloaded client application into our mobile and lauched the application by configuring with needed settings.But while trying to login from mobile ,its throwing the error as " Invalid credentials".I am using the same credentials which i used for accessing Enterprise server and CMS also.Basis team has no idea of where to create new credentials for mobile access.
    They have done every required settings with reference from deployment guide provided in the BO site, except on the BES server for which they dont have authorization.
    Do we need to do any configuration settings in BES server??
    Thank you.
    ~Ravi
    Edited by: ravindhar on Oct 3, 2011 10:40 AM

    Hi,
    I am exactly at a similar position. I followed a detailed steps from this tutorial
    http://wiki.sdn.sap.com/wiki/display/BOBJ/SetUpSAPBI4.0MobilewithBlackBerrySimulator
    But I am not able to log in. Were you able to resolve your issue. Can you help me to see if I need to perform any other configuration.
    Please let me know,
    Thank you

  • Have a number badge in settings that won't go away and there are no updates that need to be done.  Help!!!

    On my settings, there is a number one (red) that won't go away.  There are no updates that need to be done.

    Maybe you should try updating 5.1.1 from iTunes? Because I had the same thing and it was 5.0.1.

Maybe you are looking for