Basic date is not same with schedule dates

Hi,
I have a problem in MD04 stock requirement list.
Planned order basic date and schedule date is not the same.
The schedule date finish at year 2010 but basic date still end ad 2009
in MD04, the date display is basic date.
Why the basic date is not adjusted?
in configuration i had choosen adjust basic date in scheduling planned order.
In material master in house production time is not updated because we use lead time scheduling
Please kindly help
Best regards,
Freddy Ha

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

Similar Messages

Event date does not agree with photo dates in the event

Mavericks
Iphoto 9.5.1
I have made a new event and put lots of genealogy pictures for one family member in it. I changed all the photos to Jan 4, 2002. These are docs, pics, obits, etc. Thus I have given this one person this date. Other family names have another date. I modified all the original files within each event.
Beside this couples name on the "Event" label it says Jan 3, 2002 - August 23, 2014. Therefore it shows itself in the Jan 3, 2002 group of people. That is about 20 family groups up the page.
I have done the following:
     --Made sure that there are no pictures with the date Jan 3, 2002 in the event
     --Have taken all the pictures in the event and separated them out into new events--census, certificates, pictures, obits, etc. Thought I would trick the event to restarting!
     --Did a "select-all" of that event and created a new event--same thing.
     --Closed down iPhoto and started over again.
I have no idea why the Jan 3, 2002 is showing up. These are one side of the family. The January 4 is the other side!
On August 23, 2014, I did take a couple of the cemetery pictures in this event. However, they were given the new date of January 4 and Modified the original files using the checkbox. I put the same picture in another family member's event and it is OK. I
Hope I have given enough details.

I think I have solved it! After much frustration and then writing for help, I was not to be stopped. I kept looking up other helps and one person suggested that one of the pictures might be a problem. So I tried that approach. I made an event just out of the "possible" problem pix (the August 2014 date.) It was not causing a problem in another event, however.   From that event with the same pix, I exported the pix to the desktop, and then imported the pix back into iPhoto. Then I put them into the event that was having the problem. So far so good. The date of the event matches all the dates of the photos. I will now delete the "problem children."
Maybe this will help someone else.

Powerpivot Data Refresh Not working with Oracle Data Source in sharePoint 2013

I am using SQL Server 2012 PowerPivot for Excel 2010. Getting the following error in SharePoint 2013 environment, when using Oracle data source within a workbook -
EXCEPTION: Microsoft.AnalysisServices.SPAddin.DataRefreshException: Engine error during processing of OLE DB or ODBC error: The specified module could not be found..:
<Site\PPIV workbook>---> Microsoft.AnalysisServices.SPAddin.DataRefreshException: OLE DB or ODBC error:
The specified module could not be found..
at Microsoft.AnalysisServices.SPAddin.DataRefresh.ASEngineInstance.ProcessDataSource(String server, String databaseName, String datasourceName, SecureStoreCredentialsWrapper
runAsCredentials, SecureStoreCredentialsWrapper specificConfigurationCredentials, DataRefreshService dataRefreshService, String fileUrlForTracing)     -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPAddin.DataRefresh.ASEngineInstance.ProcessDataSource(String server, String databaseName, String datasourceName, SecureStoreCredentialsWrapper
runAsCredentials, SecureStoreCredentialsWrapper specificConfigurationCredentials, DataRefreshService dataRefreshService, String fileUrlForTracing)
at Microsoft.AnalysisServices.SPAddin.DataRefresh.DataRefreshService.ProcessingJob(Object parameters)
I created a simple Excel 2013 PPIV workbook with an oracle data source and uploaded that to SharePoint 2013, but no change in the results - still getting the above error.
What is this error? We have installed Oracle client (64-bit, since we use 64-bit Excel and Sp is also 64-bit) on SSAS PPIV Server and SharePoint Content DB Server. Do we need
to install it anywhere else?
Thanks,
Sonal

Hi Sonal,
To use PowerPivot for SharePoint on SharePoint 2013, it is required to install PowerPivot for SharePoint with the Slipstream version of SQL Server 2012 SP1. If you install SQL Server 2012 and then use the upgrade version of SQL Server 2012 SP1 to upgrade,
the environment will not support SharePoint 2013.
I would suggest you refer to the following articles:
Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
http://technet.microsoft.com/en-us/library/jj218795.aspx
Upgrade SQL Server BI Features to SQL Server 2012 SP1:
http://technet.microsoft.com/en-us/library/jj870987.aspx
Regards,
Elvis Long
TechNet Community Support

ICal Week view, Date is not aligned with the Time(schedule) of each date

Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

Why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

why my iPod (6th generation)not appearing in iTunes and all my songs are gone but the data is the same with last time when got songs.

I understand that your iPod nano is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
Apple - Support - iPod nano (6th generation) - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/6th_generation/assistant/itunes/
If the above did not resolve your issue, choose an applicable article below that best describes your issue.
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Mac OS X
iPod not recognized in iTunes and Mac Desktop
MacBook and MacBook Air: iPod won't mount when connected via USB hub
What to do if your computer won't recognize a USB or FireWire device
Thanks,
Matt M.

Hierarchies Job Failing The job process could not communicate with the dat

Hi Experts,
We have a group of hierarchies that run as a separate job on the DS schedules. The problem is this when we schedule the job to run during the production loads it fails but when we run immediately after it fails it runs completely fine. So it basically means that if i run it manually it runs but when its scheduled to run with the production job it fails. Now the interesting thing is If i schedule the job to run anytime after or before the production jobs are done. It works fine.
The error i get is
The job process could not communicate with the data flow <XXXXXX> process. For details, see previously logged
                                                           error <50406>.
Now this XXXXX DF has only Horizontal Flatenning and it does not run as separate process because if i have it has separate process it fails with an EOF . So i removed the run as separate process and changes the DF to use in memory .
Any Suggestion on this problem...

Thanks Mike.. I was hoping its a memory issue but the thing i don't understand is when the job is scheduled to run with the production job it fails. when i manually run the job during the production job it runs, this kinda baffles me.
DS 3.2 (Verison 12.2.0.0)
OS: GNU/LINUX
DF Cache Setting :- In Memory
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
stepping        : 4
cpu MHz         : 2933.437
cache size      : 12288 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
bogomips        : 5866.87
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: [8]
processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
stepping        : 4
cpu MHz         : 2933.437
cache size      : 12288 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
bogomips        : 5866.87
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: [8]
Thanks for your help

PI 7.1 - CPA Cache not updated with directory data.

Hi Gurus,
I have installed PI 7.1 and recently I refreshed my cache in partial and full mode. when I go to RWB->Cache monitoring -> Show Cache Status Table, I see following error for Central Adaptor engine.
<?xml version="1.0" encoding="ISO-8859-1"?>
<ConfirmationXML>
   <CacheRefreshError>
      <EngineType>
      AE
      </EngineType>
      <EngineName>
      af.sxd.mchir134
      </EngineName>
      <RefreshMode>
      C
      </RefreshMode>
      <GlobalError>
         <Message>
         CPA Cache not updated with directory data.
         </Message>
         <Trace>
         com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:191)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:440)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:491)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
     at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
     ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
     ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
     at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
     at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
     ... 11 more
         </Trace>
      </GlobalError>
      <GlobalError>
         <Message>
         Confirmation handling failed.
         </Message>
         <Trace>
         com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:162)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:462)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:603)
     at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:322)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:144)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:242)
Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:471)
     at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96)
     at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119)
     ... 7 more
Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:126)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:142)
     at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:458)
     ... 9 more
Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable)
     at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:526)
     at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:494)
     at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:156)
     at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:120)
     ... 11 more
         </Trace>
      </GlobalError>
   </CacheRefreshError>
</ConfirmationXML>
Please suggest the solution.
Thanks,
Surendra

Guys,
I have the same issue. Any help on this is appreciated!
Issue log from CPA cache refresh
<?xml version="1.0" encoding="UTF-8" ?>
- <CacheRefreshError>
<EngineType>AE</EngineType>
<EngineName>af.sxd.pl1vw158</EngineName>
<RefreshMode>C</RefreshMode>
- <GlobalError>
<Message>CPA Cache not updated with directory data.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaRefreshURL(DirectoryAccess.java:195) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDeltaCacheUpdateXML(DirectoryAccess.java:448) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:457) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
- <GlobalError>
<Message>Confirmation handling failed.</Message>
<Trace>com.sap.aii.af.service.cpa.impl.exception.CPADirectoryCacheException: Failed to check secure connection configuration. Reason: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:134) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getConfirmationURL(DirectoryAccess.java:166) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.invokeConfirmationURL(DirectoryAccess.java:470) at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:576) at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:291) at com.sap.engine.frame.core.thread.Task.run(Task.java:73) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260) Caused by: com.sap.aii.af.lib.sld.SLDException: Failed to read SLD instance name. Reason: HTTP response code: 503 (Service Unavailable) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:505) at com.sap.aii.af.lib.sld.impl.SLDAccessImpl.getSLDInstanceName(SLDAccessImpl.java:96) at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryAccess.getDirectoryURL(DirectoryAccess.java:119) ... 7 more Caused by: com.sap.aii.utilxi.sld.SldReadFailedException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:133) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:150) at com.sap.aii.af.lib.sld.impl.SLDAccessor.getSLDInstanceName(SLDAccessor.java:492) ... 9 more Caused by: com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 503 (Service Unavailable) at com.sap.aii.utilxi.sld.SldProxy.getXISubSystem(SldProxy.java:527) at com.sap.aii.utilxi.sld.XIEntityInSld.getInstFromSld(XIEntityInSld.java:553) at com.sap.aii.utilxi.sld.XIEntityInSld.readFromSld(XIEntityInSld.java:165) at com.sap.aii.utilxi.sld.XIEntityInSld.syncFromSld(XIEntityInSld.java:127) ... 11 more</Trace>
</GlobalError>
</CacheRefreshError>
Regards

Posting complete retirement not poss.with value date

Hello,
The error is coming as "Posting complete retirement not poss.with value date" when i am executing ABUMN. I am providing the asset value date same as the old assets Capitalisation date.The output comes as:
Diagnosis
Transactions have been posted to asset 900035 0 with an asset value date or posting date later than the retirement date 15.06.2009.
I have tried with later date but same result.
JK

Hello Paul,
I am not retiring the asset. I am just transferring the old asset class to a new asset class. Like: 100001 was created wrongly under 1020 class. Now we have created 500005 asset under 1040 class which is a correct class. Now I am transferring from 100001 to 500005 with the transaction code ABUMN. I am providing the same capitalisation date as of 100001 in asset value date in ABUMN.
Hope you understand.
JK

Non-cumulative initialization is not possible with historical data

Hi all,
While loading inventory cube.. 0IC_C03 .. after loading 2LIS_03_BX request get sucessful. while compress that request No Marker update. i getting following error msg.
<b>Non-cumulative initialization is not possible with historical data</b>
Regards
siva.

You sure you didn't use BF instead of BX? This messge indicates that you have historical data in your cube whereas BX only loads a fixed state at a specific point in time... Or maybe, did you initialize BX twice in R/3 without deleting the previous init, I don't know if that could cause that error but it's another possibility.

TT0819: Data store not compatible with library

Hi,
We have TimesTen 6.0.4 being upgraded to TimesTen 7.0.5.
I need to destroy the data store (which was created using library version 6.0.4) after the upgrade and I receive the following error:
===
"Failed to destroy data store: TT0819: Data store not compatible with library (lib 7.0.5.tt60, file 6.0.4.) -- file "db.c", lineno 21089, procedure "sbDbDestroy"
To force removal of the data store, specify the '-force' option."
===
I need to upgrade from 6.0.4 to 7.0.5 and also downgrade from 7.0.5 to 6.0.4.
What means that I need to:
1-) UPGRADE: Destroy the data store (created with the TT library version 6.0.4) using the TT library 7.0.5.
2-) DOWNGRADE: Destroy the data store (created with the TT library version 7.0.5) using the TT library 6.0.4.
Can it be done? How?
Thanks,
Milena

If I use the option ttDestroy -force and I manage to destroy a 6.0.4 data store using 7.0.5 library.
I just don't know if this procedure is recommended.

AA318 Posting complete retirement not poss.with value date...

Hi, please I need your help...
I get this error:
Posting complete retirement not poss.with value date 31.12.2011
Message no. AA318
I have an asset that has values in the year 2012, but I reversed all of them. It´s necessary to transfer the asset to a new asset with ABUMN dated 31.11.2012. How can I solve this?
Thnaks for your colaboration!

Hi,
Thanks, but my sap version is 6.0 and the release of that note is valid to 470. Do you have any other idea?
Thanks for you colaboration!

Error in flatfile load - date not compliant with user date settings

Hi,
I want to load a flatfile into BI 2004s.
so i created a flatfile datasrource, transformation etcetc.. all fine so far.
the file contains 2 dates in format YYYYMMDD and are loaded in DATS infoobjects (also yyyymmdd).
but when i load the data into the PSA it immediatly dumps with error message "19771009 does not match the user-dependent date format --> long text"
the long text sais 19771009 does not correspond to the date format that is assigned to the current user BIWREMOTE. which is correct.. cos there date is DD-MM-YYYY
when i change the date format in the user settings to YYYY-MM-DD it works fine...... in the forground. In the background,whatever i do, it dumps with this errormessage.
so i have 2 questions:
since when is, while loading to the PSA, the date format linked&checked with the date format in the user setting? i cannot recall ever having this issue.
did anyone encounter this problems.
grtz
rogier

Hi ,Ronald Silberst,R. Poelmann,
I am facing similar kind of problem, Could u please tell me how you overcome this problem. How to set and adding the RSDAT convesion routine into the datasource definition.
Appreciate your help . Can any one have some idea please share.
Regards
Ramesh

Chart size does not extend with the data

Hi,
One of my reports has a horizontal bar and the chart size does not grow with the data. The chart displays fine if I have minimal amount of data. If the data grows, the display is bizarre, it's just messed up. Is there an option I need to set? Please provide your inputs.
Thanks
Arch

Hi,
I tried with all these options, but no success. I remember I used to get full visible charts initially. Not sure what has happened charts are getting chopped off by at least 50px right and bottom. Interestingly When I export the chart to Excel it looks perfect.
Any suggestion. Has anyone faced this issues. I am using 11.1.1.5 version.

Graph Data does not align with the axis label

Hi,
The graph data does not align with the axis label when
datetimeaxis is used.
http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
(in the using parseFunction property example) when you hover on the
line graph the values do not align on the labels. Is this a bug?
Can somebody help me with this.
Thank you,
Gautam.

Hi All
Thanks for looking into it.
Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
But that change has not reflected in BW yet even after replicating datasource.
I hope i have made you all understand the situation.
Thanks for your help
Ishi

PC Suite 7 – Data transfer not possible. Check dat...

When I try to use (open, update, modify etc.) the “contacts list” in PC suite version 7.0.7, I always have the following error: “Data transfer not possible. Check data connection”. Instead the SMS list works fine. My phone is Nokia 6267.
Anyone has a solution?
Best Regards
Bix123

Hi everyone,
I had the same problem for months with many PC Suite versions & both XP service packs until I tried a phone setting just for testing and everything worked out fine In my phone (3110c) under Settings / Connectivity / Data Transfer / PC Sync, I filled in a random User name & Password and voila!!! All contacts copied just fine!!! I hope this works with other models with the same menu as well. It looks that it's not a PC Suite problem after all (at least for me that is).
Hope I helped you guys
Spiros
Greece

Basic date is not same with schedule dates

Similar Messages

Maybe you are looking for