Basic DB-25 to DB-9 connecting cable instead of Sartorius cable ?

Hello everyone. Can i use a basic DB-25 to DB-9 connecting cable instead of a Sartorius cable to interfacing between the com port and Sartorius scale. Sartorius DB-25 to DB-9 cable is expensive (85$) so i need a cheaper solution ?..
Thanks in advance
Oesen
Best regards
Oesen

No, 2 would go to pin 2 on the 9 pin end.
Refer to this link:
http://pinouts.ru/SerialPorts/Serial9_pinout.shtml
Now using the chart you posted, match up the pins under the Sartorious description to the signal descriptions shown for the 25 pin but cross reference them to the pin number descriptions for the 9 pin on the link above.
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Similar Messages

Can anyone help me restore an ipod itouch ,tried restore on itunes but it fails everytime the error code says it's a conection problem i have 2 computers and tried all usb ports but keephaving the same problem ,even bought a new connection cable

Went to update the ipod touch and it wiped out everything , Itunes keeps trying to restore it but fails everytime giving me an error that it cannot see my ipod yet it sees it and tries to restore it everytime i connect the ipod to the pc , the help file suggested i reinstall the latest version of I tunes so i did i tried using different ports on 2 computers and also bought a new connection cable but still won't restore can anyone help?

Try a manual install, as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Unable to un-install Nokia Connectivity Cable Driv...

I am having the same issue as many other users with Nokia PC Suite 6.8.
I am running Windows XP SP2 on a IBM R52. In the office, they installed the latest driver updates from IBM and since then, I cannot use PC Suite. So I upgraded to 6.8 to no avail.
I am getting the message when choosing "get connected" "there is no available connection type and therefor connection to the phone cannot be established....etc"
I used PC Suite Cleaner 3.4. It does however not remove the Connectivity Cable Driver and PC Connectivity Solution. So I tried that in Control Panel. I get the message "the feature you are trying to use is on a network resource that is currently unavailable. Click ok to try again or enter an alternate path to a folder containing the installation package Nokia_Connectivity_Cable_Driver.msi in the box below". I get the same message when I try to uninstall the PC Connectivity Solution.
I have also run registry cleaners, removed PCSuite, rebooted etc etc...
I feel that I must also remove the Connectivity Cable Driver and PC Connectivity Solution but I simply can't.....
help please!! thanks in advance...
Solved!
Go to Solution.

22-Oct-2006 10:38 PM
dutchkiwi wrote:
I am having the same issue as many other users with Nokia PC Suite 6.8.
Recently because of some destructive viruses obliged reinstalling Windows XP SP2 on my lapTop-Dell Inspiron 6400 again. I installed the latest driver updates from the internet and since then, I cannot use the letest version of PC Suite. So I tried upgrad it to (Nokia_PC_Suite_rel_7_0_9_2_eng_web) .
I am getting some error messages when getting started installing above mentioned version of pc-suit. As yow know to reinstall a new program windows first remove the existing one throuh the system.
I used windows install Cleaner cleanup to clean the cable drivers and pc connectivity . It does however not remove the Connectivity Cable Driver and PC Connectivity Solution. So I tried that in Control Panel. I get the message "the feature you are trying to use is on a network resource that is currently unavailable. Click ok to try again or enter an alternate path to a folder containing the installation package Nokia_Connectivity_Cable_Driver.msi in the box below". I get the same message when I try to uninstall the PC Connectivity Solution.
I have also run registry cleaners, removed PCSuite, rebooted etc etc...
I feel that I must also remove the Connectivity Cable Driver and PC Connectivity Solution but I simply can't.....
help please!! thanks in advance...

Can you get an virus or trojaner through the connection-cable (PC) from your iPod touch?

I had an trojaner on my PC earlier and my iPod touch 4G was connected to my computer. Is it possible for the trojaner or viruses in general to make their way through the connection cable or something? If a photo or something wasn't infected. I mean sync-wise, etc.

It would be very difficult for a virus or trojan to get from the iPod to your PC via USB. Attaching a virus to any media file such as a photo or music track is very, very difficult, and all known exploits that would do this were blocked a long time ago. Attaching a trojan would not be possible. Unless there's a new exploit I haven't heard of, only if a trojan program was attached to an email and from there transferred to an app that could then be synced to your computer would it be possible malware come from your iPod. I think that rather unlikely and that your trojan got into your PC from some other source.
Regards.
Message was edited by: Dave Sawyer

The older version of Nokia Connectivity Cable Driv...

Trying to install the actual version (even Beta 3.1) of Ovi Suite fails with the error message "The older version of Nokia Connectivity Cable driver cannot be removed" (Error 1714)!
Im running a Win 7(64bit) Pro system and used to have PC Suite 7 installed.
PC Suite 7 was uninstalled before I attempted to install the new Ovi Suite. As it failed with the error message above, I called the Nokia hotline, deinstalled all existing Nokia software and tried to run PC-Suite Cleaner 7.1.1. Regretfully, PC Suite cleaner hangs up immediately.
Scanning my computer for Nokia entries on advise from the hotline, all Nokia files were deleted and the registry was scanned and cleaned from Nokia entries as well.
Obviously some remains of the cable driver are hidden in the system somewhere.
Could anybody please help ? I need to synchronize my X6 on a regular basis.
Thanks !

Can't you see 'Nokia Connectivity Cable drivers' in the Windows Control Panel ?

Connecting cables For MacBook to a VGA

What connecting cables can I buy to connect my MacBook with a (I guess) standard size DVI to a VGA standard? All I can find are Mini-DVI (which I don't have on my MacBook) to VGA. Help!!!

Here is exactly what both of my MacBooks say and in the post after yours, there are two pictures of DVIs, the top one being the original, bottom the Mini-DVI... BOTH of my MacBooks have the ORIGINAL larger DVIs....THAT is my problem, I cannot find an adapter that will take me from the ORIGINAL DVI to a Standard VGA.... Incidently, I bought both of these at different times, different places so would assume MY issue would not be isolated. Past the occasional need to have a larger display, I love these machines and really don't like being forced into buying different machines to satisify my viewing needs. Thanks for you time, attention and suggestions, they are ALL appreciated! - Doc57
Model Name:          MacBook
Model Identifier:          MacBook4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          800 MHz
Boot ROM Version:          MB41.00C1.B00
SMC Version (system):          1.31f1
Serial Number (system):          W8xxxxx0P5
Hardware UUID:          9FBC6B3A-4F33-5B81-9EC0-B98B5954F93C
Sudden Motion Sensor:
State:          Enabled
<Edited By Host>

Computer reboots shortly after connecting cable to ipod

Just recent got new fifth gen ipod 30 and installed itunes, set up library and playlists. Now ready to connect cable to my USB 2.0 and within 30 seconds after connecting, BAM my computer reboots itself. I later get a signiture message 'BCCODE:19'(and more info). The ipod display prior to reboot indicates "do not disconnect" however, it freezes after the reboot. HELP!! Ipod has downloaded some songs but I need help troubleshooting possible hardware or software conflicts to make any headway. What are my options to remedy this problem forever? Thank you.

Hi Sherif
It's probably worth trying a couple of standard trouble shooting techniques:
- Reset the PRAM: http://support.apple.com/kb/HT1379
- Reset the SMC: http://support.apple.com/kb/HT3964
Resetting the SMC often fixes battery/power supply issues; resetting the PRAM probably won't make any difference but it only takes a few seconds and is quite harmless.
Bob

Nokia 6210 Nav, PC Connectivity Cable Drivers

When trying to connect my 6210 to my PC it takes about an hour or more and it says it is installing the PC Connectivity Drive. After all this it seems to only stay connected for a short time and then drops out. Can anyone offer help? Thanks

if you're on vista then it's common for this OS to take very long time to install drivers. but that should happen the first time you connect the phone only, after installation the phone should connect without problems after that.
anyway,1- try to remove your version of nokia pc suite
2- run a registery cleaner if you have one
3- download the latest version of nokia pc suite
4- install the app, wait for it complete and ask for a reboot.
5- reboot the pc, connect the device.
if you experiance any problems with driver installation again, stop automatic search of drivers , and direct the search to (c:\program files\nokia\connectivity cable drivers) that should speed the installation.
i hope that will help
Fear not those who argue but those who dodge

Connectivity cable driver

Hello,
I have a problem when I try to install PC Suite 683
I get error: "Another version of Nokia Connectivity Cable Driver has been detected. Please remove it before continuing."
I don't know what to do else.
Here is the things I tried:
1. add/remove programs->uninstall connectivity cable driver
2. pc suite cleaner
3. search and delete from registry every key where exists any of words (nokia, pc suite, connectivity cable)
4. install nokia connectivity cable driver and uninstall it
5. i'v searched and removed files containing word "nokia" (all that can be related to nokia)
and i still get the same error.
i have installed version 67 - and it works just fine
Thanks for any ideas
system:
Win XP Pro sp2Message Edited by rupertas on 08-May-200711:17 AM

Hi rupertas
Have you tried getting Windows Installer CleanUp Utlity - msicuu2.exe from Microsoft
Please see post by diving_catch concerning this issue to remove both "Nokia connectivity Driver" and "PC Connectivity Solution" programs
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia 6280 connectivity cable/PC Suite

hi! i have a new 6280 and have installed all PCSuite and cable drivers software and updates. i have a CA-53 cable. below are all the specs. i followed installation instructions correctly. when i get to the Get Connected setup window, i click "cable connection", then "next" and connect the phone and cable to the pc. nothing happens in this window, but i get a windows error message that says "the device has malfunctioned" and "windows doesn't recognise it."
after a minute or so, my phone sees it has a cable connected and i choose the default mode, but still the "Get Connected" setup window doesn't see it, and windows gives the same error message bubble as before.
i tried selecting the phone in PC Sync, but it doesn't find my phone.
i also check the settings for "cable connection" in the Connection Manager, but the configure button stays deactivated. i've tried rebooting, uninstalling/reinstalling, but nothing works to continue with the setup. the only thing that seems to have worked is in "My Computer" i can see the Nokia Phone Browser and access that. but it only shows how to add a new contact or write a text message.
now i'm just wondering if i need to have my phone chip card activated, meaning that it's online and can make calls. well, it won't be activated for another week. is that what this is all about? if it is, it's not clear in the setup. it only states that this section of the setup is for connecting the phone to the computer, and no mention at all about connecting to the internet or my phone line provider.
all i want to do is continue the installation of the software and i want windows to recognise it.
i checked the help files and did as they say. the device manager has no listing of any nokia products - wireless or otherwise.
please can you tell me what to do? thanks.
Operating system:
Microsoft Windows XP Build 2600 Service Pack 2
Nokia PC Suite: Version 6.81.13.0
Connectivity Cable Drivers: Version 6.81.1.2
Bluetooth stack: Microsoft Bluetooth stack Version 5.1.2600.2180

While phone connected to PC, right click My computer - manage - device manager and see if there are any unknwn yellow question mark devices. If yes, highlight it - right click - uninstall.
Boot PC
Also battery boot your phone and run factory settings to it.
Now connect the phone again and see if it pops up the question about the USB mode right away (that is how it should work and not wait for a minute to appear.
I have 6280 and I tried to connect it without the SIM card and it connected normally. I also got the question in phone about the USB mode immediately.
But, I don't know is there a difference if you connect the phone to PC first time ever without a SIM
If it continues to be so that the USB mode does not pop up, I would consider taking the phone to a service center.

Unable to uninstall the Nokia Connectivity Cable D...

hi,
i had nokia PC suite version 7.1 which i uninstalled but the nokia connectivity cable drivers were not getting uninstalled, every time it gives me a error about the .msi file mising. i've tried in the safe mode but no go. i've also deleted all nokia folders from the program files and the registery in safe mode but still no go... i've also tried using the PC suite cleaner.. but still the same issue...
Please help
regards,
Gulrez

You obviously deleted the files before uninstall. Just reinstall PCSuite. Use a program called Revo Uninstaller to perform a clean uninstall and clean up the registry mess after with the same prog.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Nokia Connectivity Cable Driver repaired but still...

Hey there, I had moved messages stored in the phone to PC via Nokia Suite before, however I got a nokia connectivity problem so nokia suite cannot detect my phone/search it via bluetooth now. I tried to fix it by using the method of repairing ‘Nokia Connectivity Cable Driver’ but it doesn't work. Everything went smoothly but still nokia suite cannot detect anything. So I may need to reinstall the whole nokia suite but the main concern is that if I reinstall my nokia suite, the SMSs stored in the Nokia suite will lose is it? So may i know what I can do?
Phone: Nokia 5800 XpressMusic
Version of Nokia Suite: 3.8.48 (should be the latest)
Computer: Windows 7
Thanks.

Thanks however, the problem is that Nokia Suite cannot detect my phone so how can it copy the text to the clipborad?

Nokia Connectivity Cable driver problem (Nokia 311...

I have an unlocked Nokia 3110 Classic with 2 GB MicroSD Nokia MU-37 memory card. On my PC operating system is Windows XP Service Pack 3. For connection with PC I use an original Nokia DKE-2 USB 2.0 data cable. My problem is when I install any version (from 6.5 to the latest 7.0) of Nokia PC Suite with Nokia Connectivity Cable driver or separatly this driver first and then Nokia PC Suite I got a problem under Device Manager with two devices that have yellow exclamation (saying: The drivers for this device are not installed.(Code 28).To reinstall the drivers for this device, click Reinstall Driver). They are under Modems: Nokia 3110 Classic USB modem, and under Ports (COM & LPT): Unknown device. This unknown device and also Nokia 3110 Classic USB modem (with yellow !) is present when I connect my phone and PC with USB cable and when I choose Standard Nokia mode. I tried to solve this problem on many ways (unsuccesful) following NOKIA instalation instructions and troubleshooter. When I try to install (or reinstall) a driver for this two problematic devices with Hardware Update Wizard choosing Windows Update or any other way (automatic - recommended or another) at the end I got this message: 1. Windows can't install modem with two answers: YES or NO, if I click YES, there is a new message: A service installation section in this INF is invalid. If I click NO at the first message the window of Hardware Update Wizard is just closed with no other messages !
So please if anyone here knows (or had this problem before and solve it) how to solve this problem, help me, because I am desperate.
I'll be grateful for any help !
Message Edited by ratnik_pakla on 29-Sep-2008 11:17 PM
Message Edited by ratnik_pakla on 29-Sep-2008 11:23 PM

In this attachments are pictures (screenshots) of my problems (in .bmp format): screenshot of Device Manager on my PC, Unknown device in Device Manager,Nokia 3110 Classic USB Modem in Device Manager and Windows XP Professional SP3.
You'll see that I use on my Windows XP Professional Service Pack 3 some Vista themes. So, don't think that this is some "fake Service Pack 3", this is the real Microsoft Windows XP Service Pack 3 (last and official, not release candidate) downloaded from Microsoft Web site, but I use some Vista Customization Desktop Tools or something like that, I don't know exactly the name of this program, but that program install Vista themes that I like.
P.S. This attachments are pictures in .bmp format but I added a .txt extension because this forum only except files with .log, .txt, .bat, and .xml extensions, so if you are going to save and open it on your PC please remove .txt extension. If not, just click on it.
Message Edited by ratnik_pakla on 30-Sep-2008 03:10 AM
Message Edited by ratnik_pakla on 30-Sep-2008 03:13 AM
Attachments:
USB modem.bmp.txt ‏538 KB
Unknown device.bmp.txt ‏538 KB
Device Manager.bmp.txt ‏846 KB
sp3.bmp.txt ‏108 KB

Nokia Connectivity cable driver for Nokia 6730 cla...

I tried to install Nokia PC Suite for my Nokia 6730, but without success, because the system says: "The older version of Nokia Connectivity Cable Driver cannot be removed."
What can I do ?
Solved!
Go to Solution.

ceriana2 wrote:
Thank you for your proposals. But they did'nt help. I did all the proposed steps, but the message again is: The older version of Nokia connectivity Cable Driver cannot be removed.
Do you have another idea ?
Are you logged in as admininstrator? Use Revo to uninstall all Nokia related software including drivers and start again.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
Message Edited by hadimassa on 01-Feb-2010 05:29 PM
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Installation of "Nokia Connectivity Cable Driver" ...

I have a Nokia N80. Running the installer for the latest Ovi Suite, it fails on the first item, which is the Nokia Connectivity Cable Driver.
I have a screenshot of the installation failure and of what I see in Windows device properties (along with Ovi asking me to connect the device, which is already connected and in PC Suite mode).
The thing is, everything had been working super smoothly before! Then, today, this.
Thanks in advance for any help!
Attachments:
screenshot.PNG ‏146 KB
installer screenshot.PNG ‏15 KB

uninstall any old programs like nokia pc suite, and any associated drivers from the Add/Remove programs list within Windows XP. make sure you do a thorough registry clean and junk file clean using appropriate software then try again. this time it should work, also make sure your phone is fully charged and that it is connected in PC suite mode.
P.s. if it is connected in PC suite mode, this usually means that you should install nokia pc suite first so that the device is recognised as being in pc suite mode, then you can install Ovi suit additionally after that.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!
Message Edited by adrianhughes on 03-Apr-2009 02:52 PM

Basic DB-25 to DB-9 connecting cable instead of Sartorius cable ?

Similar Messages

Maybe you are looking for