Basic GPU Mode only one available on ATI 5770

I am using:
intel i7 950 3.02 ghz
6 gigs tri channel ddr3
ATI 5770 1 gig card
SATA hdds 7200 RPM
windows 7 64 bit
ATI newest drivers as of 4/27/2011 (11.4)
after updating to these new drivers i am still only able to use basic GPU functionality instead of normal or even advanced. has anyone found a fix for this or know what the issue is? ive been crawling the internet since the last 2 driver releases and find it very frustrating, i would love to be able to split some of the work between myGPU and CPU etc.
thanks for any help,
Chris

There are well known problems (at least on the adobe forums) with
the 11.3 and 11.4 drvers and open gl for photoshop cs5.
The 11.2 driver is the one to try from AMD:
http://support.amd.com/us/gpudownload/Pages/index.aspx
http://forums.adobe.com/thread/844086?tstart=60
MTSTUNER

Similar Messages

  • Kindle Fire & Adobe Air issues with scaling & bottom menu - GPU Mode only

    Hi,
    Long post ahead, please buckle down for a while.
    I'm having issues with the Kindle Fire and the bottom 20 pixel menu in GPU mode, CPU mode behaves correctly. The project was created with flash cs5.5, the stage size is 1024x600 and I've set the NO_SCALE flag. When the app is run on the Kindle Fire the Kindle scales it to 1024x580 for the bottom 20 pixel menu. If I create the project as 1024x580 it still scales it down and then centers it vertically introducing a 10pixel black bar at the top and I would assume a 10 pixel black bar at the bottom under their menu. In CPU mode the app is not scaled and the bottom 20 pixels is obscured.
    The problems I have encountered so far are incorrect mouse locations as reported in various mouse events. Messed up scrollRects when I try and clip something for display. Not being able to press buttons because of the incorrect mouse coordinates, the further down on the screen the more incorrect the buttons are. You can click below a button near the bottom of the screen and have it activate whereas a button at the top acts perfectly. This is due to the accumulated error value from the yPos * scaleValue.
    The mouse positions are off exactly by a scale factor of 600 / 580 (1.034).
    The video below shows the problems, sorry for the poor video handling. The red line in the video is drawn in the center of the y position detected on a mouse move and mouse down event, but shifted to the left for visibility. The center of that stylus is where it should be at all times, as you can see it isn't. You can also see displayed the buttons not working correctly, they are clearly being activated when the press on the screen is not over the button (indicated by the red line).
    The circle in the middle of the screen has it's scrollRect set to to the width and height of the circle, as you can see it is clipped.
    At the end of the video I press the power button then press it again to unlock, you can see the screen looks good for a split second then gets resized. Once resized the circle becomes clipped again. If I were fast enough I would assume the buttons would work correctly as well. Watch closely, it happens fast.
    Oh, and the app works fine on the desktop in either GPU or CPU mode. The app also works fine in GPU and CPU mode on my iPad2, Google HTC Nexus One, Nook Color and my 4th gen iPod Touch.
    Now whos issue is this? Adobes, Amazons or mine? I know what the problem is but don't know how to fix it.
    Youtube video link:
    http://youtu.be/660O3YMK9k8
    Thanks for your time!
    PS: if anyone wants the .fla for testing themselves, just ask and I will post a link to it.

    I'm going to forward this along to our android team for their review.  In the meantime, could you open a bug on this over at bugbase.adobe.com?  Please post back with the URL so that others affected can visit the bug and cast their votes.
    Thanks,
    Chris

  • If I don't have a previous version of an adobe product, but the only ones available of older editions are updates, can I use the update version to install the software?

    Dear Adobe,
    I've got older systems, ones that can't handle CS6, and a budget too low to purchase a new system and your software even with a student discount. Is there any way to use an update version? I wish that all of the "Creative Suite[s] products [would] continue to be available for sale via ESD on Adobe.com"(Adobe)*, or at least most of them. I understand the need to update, and that the industry is difficult with competitors, but I wish that all of your software versions were aimed towards 32 bit systems too. There are plenty that can keep up with the operating System updates, and I only wish that you would have kept at least CS5 on support instead of shutting it down. So, if you won't accept support of older products, can you help me with this? Or is this beyond any of the software contracts that is in the company's power? I appreciate any assistance in this matter.
    *CS6 FAQ

    You can only buy CS6 and CC. Otherwise you will have to find someone willing to part with his license and run a license transfer. Though, quite frankly this doesn't really make sense. You can buy cheap laptops withe a suitable 64bit version of Windows 7/ 8 for 300 Euros. The money saved could easily be invested in a CC student plan rather than possibly trying to find an overpriced older version with the risk of getting scammed... Otherwise you can use the trials of course, but that's about it.
    Mylenium

  • Hand Tool only one available

    I started ID CS4 today and created a new doc and no matter what tools I selected, all that was available was the hand tool. Select the pen tool, rectangle tool or selection tool and the cursor would always be the hand and this was the case with several docs. Then, all of a sudden, all the tools were available again.
    Anyone have this happen to them?

    Is your desk as messy as mine? Sometimes I've got something leaning against the keyboard.
    If it happens again, and there's no external cause, try turning Video hardware acceleration off. If it goes away, you should look for an updated video driver.
    Peter

  • [ SOLVED ] 2 new packages available, only one available for download ?

    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    Targets (2): gdb-7.1-2 neon-0.29.3-2
    Total Download Size: 0.17 MB
    Total Installed Size: 8.49 MB
    :: Retrieving packages from extra...
    error: failed retrieving file 'neon-0.29.3-2-i686.pkg.tar.xz' from archlinux.goodsoft.lv : Not Found
    error: failed retrieving file 'neon-0.29.3-2-i686.pkg.tar.xz' from mirrors.kernel.org : File unavailable (e.g., file not found, no access)
    error: failed retrieving file 'neon-0.29.3-2-i686.pkg.tar.xz' from mirrors.kernel.org : Not Found
    warning: failed to retrieve some files from extra
    Errors occurred, no packages were upgraded.
    The question is, why does it say there's a new package available if it's not there ? I've enabled 2 repositories - local and official .. am I missing something here ?
    Last edited by SemiBz (2010-04-11 14:22:12)

    All done - thank you

  • Targeted Disk mode only shows one of two hard disks...

    Got a new computer to transfer old info to from my dual g4 1 gig mirrored. When i set in targeted disk mode only one hard drive shows up. I confirmed both are set to cable select and only the master is showing. If I swap the drives the master is the only one that will show up. Any ideas on how to get both showing up at the same time?

    Only the Master drive can be used in Target Disk Mode. See
    <http://docs.info.apple.com/article.html?artnum=58583>

  • Elements 9 collage only one theme - basic only?

    I've been attempting to create a collage in elements 9 and am presented with only one theme - basic.  Are there other themes available?  If so, where are they located?  Advanced mode still has only the basic theme, but I can access multiple layouts. Or, is one required to purchase Plus to get more themes?  Other items - like greeting cards - have multiple themes

    Well, if you just choose the background you want, that will replace the existing one. If you want to remove some of the frames, just delete them, and then target the layers for the existing frames and you can change them to any style you want. With the Advanced mode, you can create any style you want, really.

  • I have just downloaded Elements 11 & there is only one frame (basic) in collage, how do I get more?

    I have just upgraded from Elements 7 to Elements 11 but find in the photo Collage there is only one frame, how do I get more, my old 7 had a good variety???

    Hi Wobygong5,
    I am afraid PSE11 has just one theme, ie. Basic.
    However you can go to Expert mode, and then create a new image of the size you want, and then insert frames from the Graphics panel. You can insert as many frames as you want.
    But Photo Collage will offer you just one theme.
    -Rahul.

  • Crash Affecting only One Login - But Not in Safe Mode

    I have an iMac (built-in iSight) that suddenly has problems with only ONE login (the other accounts on the machine work fine). The troubled login won't mount the desktop at all, even with the entire library folder removed. Ran DW utility, but that didn't help. The interesting thing is, if I boot in SAFE mode, the problem goes away.
    What am I missing? If there's a problem with some bit of startup code, driver, etc., why is it only affecting one login?
    I realize my info above is sketchy. Hoping it might be enough for somebody to offer a clue... thanks.

    Hi, Lonestar.
    An errant Startup or Login Item maybe the cause. In this case, it would likely be a Login Item defined in the affected account. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem. Focus on the instructions concerning Login Items with the affected account.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Installing Boot Camp - There is only one partition available for Windows

    I have a brand new Mac Mini. Ran Boot Camp assistant and created Windows partition - 80 GB. Then when instructed, inserted Windows XP install disc. It went through some install steps then came to screen where you chose the partition to install Windows. There was only one partition showing - Partition 1. I think that's the Mac partition, so I quit install, removed partition with Boot Camp and tried again, this time setting Windows partition at 32GB. Insert Windows install disc, same result - only Partition 1. I called Apple support, we did it all again - same result. They had me completely reformat my Mac disc with the OSX discs, then run Boot Camp assistant and set partition to 32 GB. Same result - only Partition 1 is available. The Windows install disc I am using is the same disc I used to put Windows on my son's MacBook about 9 months ago.
    I need this Mac Mini to run both OS. What to do?

    Use NTFS for Windows and buy Paragon NTFS for OS X
    You can also try Paragon HFS for Windows
    As long as you are using for data and backups, you can leave the drive as GPT too.
    I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
    And yes you can use Windows to create a partition.
    Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
    MBR has trouble with 3TB drives.

  • Firefox crashes at start in Safe mode - On ONE user account ONLY

    Firefox crashes at start in Safe mode - On one user account on PC only
    I have done everything on Firefox crash checklist
    No '''Report ID''' since no start.
    So no nothing in further support? See below
    https://support.mozilla.com/en-US/kb/Firefox%20crashes#w_check-to-see-if-the-crash-happens-in-safe-mode
    '''Get help fixing this crash'''
    Figuring out the cause of a crash can be difficult. If you've tried the steps above and can't get Firefox to stop crashing, the steps below will show you how to collect information about your crash so our volunteers can help you.
    1. In the Firefox Location bar, type about:crashes and hit Enter. A page listing submitted crash reports will appear. '''NO START so no Firefox Location bar'''
    2. Right-click on the latest crash under Report ID and choose Open Link in New Tab. '''NO START so NO Firefox Report ID and not possible to choose Open Link in New Tab'''.
    A tab will open to a page on crash-stats.mozilla.com, saying that "Your report is being processed". When it is finished processing, your report will load. '''NO START so NO Firefox Report ID and NO report will load so dead end and no help or support possible'''
    3. Click this special link to ask for help with your crash.
    Note: This link is only valid for help with crashes.
    '''I have done this but can not find my question nor any answer neither. So what is next step to find support help?'''

    Hi Max,
    Congratulations, at least you made a stab at solving the problem. I think a lot of users used to glance at that KB article ([[firefox crashes]]) and give up trying!
    Hopefully the crash instructions will be further modified soon, (some of us consider the following is an [/kb/Firefox%20crashes/discuss/1855 omission] that needs correcting) have a look at this article for an explanation of how to get the crash ID from your OS even without using firefox:
    * http://kb.mozillazine.org/Breakpad#Location_of_crash_reports
    The XP OS is likely to use smoke and mirrors to make it look like you have a totally
    separate installation of firefox for each account, but normally you have the one set of (most) program files, and then for firefox separate [[profiles]]. So this indicates the problem is likely to be in the profile of the problem account, or down to a plugin, malware or other issue relating to that account. <br/>(I note you have already scanned for malware with MSE, that should detect a particular trojan that is a top cause of firefox 6 crashes)
    If you create a new clean profile in that account hopefully it will solve the crash problem, you can then address the issue of copying settings, bookmarks. passwords etc back. BUT before attempting that ensure that you disable all plugins, ([[safe mode]] does not disable plugins) if you have not already done so. Some plugins may not show up in Firefox's list, you may need to look at the OS program lists.
    I note you mention banking, a particular utility ''IDvault'' (I think Comcast supply it) has been causing crashes. Are you using IDvault ? <br/> (IDvault should be fixed soon bug684748; version 1.0.627 may have been fixed, but standalone version 5.9.627 has not yet been fixed )
    See also
    * [[troubleshooting plugins]]
    * [[firefox crashes when you open it]]

  • Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space?  Only one Sparse Bundle, same name.

    Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space?  There is only one sparse bundle but when I enter time machine I don't see my historic backups.  I use a synology DS212 for my time machine.  Started a new backup which is 218gb but it says 618 gb is occupied  therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014.  As you can see there is a second sparse bundle from 2012.  Not sure what that is.

    This is an old message now, but what happened to me similarly was:
    I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
    At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
    It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
    (I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
    My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
    But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
    As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
    BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
    I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
    Charles

  • Desire firefox kiosk mode where full screen allows an exit (other than ALT + F4) only one URL required for company timesheet entry. No optons. No navigation.

    using win 7 x86 SP1, firefox 18 with kiosk add-in r_kiosk-0.9.0-fx.xpi . Full screen kiosk mode uses one URL to company time entry sheet. Firefox is not company standard and needs to be provided for this purpose only. We're adept at virtualized delivery via AppV and have a solution BUT.... Really like the lack of toolbars providing no option to the user. No right click, no navigation. Perfect except there's no close or exit option except keyboard stroke such as ALT+F4. I'm not talented enough to modify the XPI file to provide a full screen kiosk BUT with a close option simple enough for 3500 end users. Advice appreciated.

    Thank You David. The add-on you are suggesting is exactly the kiosk add-on specified in the question. That is the one that does not have a close button. Thank You again for researching this.

  • Xfce4 with three ATI 7970 but only one monitor

    Hi everybody,
    I'm running xfce4 and I have 3 of those graphic cards installed to do opencl computing on them. As I wasn't able to run the Intel driver and the ATI driver in parallel I've connected my monitor to one of the ATI cards. This works well as long as I have only one or two cards running. As soon as I enable the third card my window manager breaks: I cannot maximize windows, terminals and some other windows don't have a frame and I can't change the desktop (ctrl+alt+arrow).
    What I did is nothing but following:
    $ sudo aticonfig --adapter=all --initial
    reboot
    Than the window manager breaks. To fix it I've changed the first few lines in the xorg.conf and commented the third screen:
    $ head /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0"
    # Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0"
    EndSection
    Section "Module"
    EndSection
    Below that "Device" and "Screen" sections still exists for Device[2]/Screen[2]
    After rebooting the window manager works fine again, but I can only run jobs on the first two GPUs:
    $ aticonfig --adapter=all --odgt
    Adapter 0 - AMD Radeon HD 7900 Series
    Sensor 0: Temperature - 53.00 C
    Adapter 1 - AMD Radeon HD 7900 Series
    Sensor 0: Temperature - 55.00 C
    ERROR - Get temperature failed for Adapter 2 - AMD Radeon HD 7900 Series
    How can I fix this? Is there a way do deactivate a card but still use it for opencl? Running "amdxdg-su -c amdccle" doesn't work and running amdccle without I can't disable any screen.
    Cheers,
    Jonas

    I now sow following in the dmesg:
    [ 1110.994136] xfwm4[4052]: segfault at 9 ip 00007ff64183987a sp 00007fff50131d30 error 4 in libglib-2.0.so.0.3800.2[7ff6417d6000+fe000]
    [ 1111.032054] xfwm4[4068]: segfault at 0 ip 00007f2bba521f84 sp 00007fff2f43e088 error 4 in libc-2.18.so[7f2bba4a6000+1a0000]
    [ 1111.040547] xfwm4[4064]: segfault at 9 ip 00007f24215d287a sp 00007fffb869b7c0 error 4 in libglib-2.0.so.0.3800.2[7f242156f000+fe000]
    [ 1111.082268] xfwm4[4072]: segfault at 9 ip 00007f099856987a sp 00007fff7ff52db0 error 4 in libglib-2.0.so.0.3800.2[7f0998506000+fe000]
    [ 1111.120968] xfwm4[4080]: segfault at 9 ip 00007fa048c3487a sp 00007fff44590ea0 error 4 in libglib-2.0.so.0.3800.2[7fa048bd1000+fe000]
    [ 1111.162588] xfwm4[4089]: segfault at 9 ip 00007f15ba66187a sp 00007fff93bc3290 error 4 in libglib-2.0.so.0.3800.2[7f15ba5fe000+fe000]
    So I've tried to restart xfwm4 and it worked! But after rebooting xfwm4 crashes again and I have to manually restart it

  • How to flag only ONE image when several selected in 'N' mode ?

    Hi,
    I want to compare several images in a same serie. I select. I press N key, then I select in strip bottom bar the group of picture.
    I want to put a flag (or star) to only the ONE I prefer, but all pics get the flags or star...
    I need to take out the reject by clicking each X of each pic to threw them away, and finally pick only the on I want...
    How to pick or star only ONE image on N mode (ENSEMBLE Mode in french LR)
    Manys tks
    Fred

    I can't reproduce your issue on Mac or Windows. Quite often when odd ball behaviour arises it's an indication that Lr preference file has become corrupt. Have you tried trashing your Lr preference file then relaunching the application? The name and location for the preference file described here Preference and other file locations in Lightroom 5

Maybe you are looking for