Basic Info & Help Needed!
Hello,
I recently got Logic Pro, and a TonePort KB37.
Basically, I can't figure out how to use TonePort on Logic. I see that there's input from it, yet i cannot hear anything.
I also can't figure out how to record anything.
If you guys could help me out, I would greatly appreciate it.
also if you could just offer some basic functions
like recording with my iBook internal mic or stuff like that, i would like it much.
thank you in advance
Cody Trevino
1)How Do I activate my Plug- Ins?
Please note that the Toneport DI is preactivated and a license key is not necessary.
In order to activate your Line 6 Plug-Ins there are a few steps you must take. First, please make sure you have downloaded the latest version of Line 6 Monkey from our website HERE http://www.line6.com/software/ . Once you have the Line 6 Monkey downloaded please plug in the device that contains the plug ins via USB and launch the Line 6 Monkey. On the Optional Add-Ons tab in the Monkey select “Activate Purchase” and paste your License Key in the prompt window. Select “Activate”. Once the Monkey has activated your Plug-Ins you may need to authorize your computer to use them. In the Optional Add-ons tab in Monkey click on the “Authorize” button in the top right corner. For more detailed information please refer to our Gearbox 3.0 set up guide on our website HERE. http://www.line6.com/support/knowledgebase/toneporthelp/
Similar Messages
-
If I am in the wrong forum, I apologize, but the Flash Builder forum is closed.
I am a complete newbie with regard to the flash development environment and want to understand more about Flash Builder. So I am trying to do the "Flex Test Drive: Build an application in an hour" tutorial. It's a nice idea.
It tells you to create a web service using Zend. So I followed their instructions... didn't find success there.
Then it occurred to me that I already have a WAMP service installed on my pc. Do I also need a Zend service?
If I don't need a Zend service, do I need to unintall Zend?
After that, do I need to explicitly to define a service CLASS for WAMP? If so, could some kind person explain to me how to get started on this, or direct me to a document that a newbie can understand?
Thanks, any help will be appreciated.Flash Builder can access just about any kind of data on any type of server (the "back-end"). It looks like you want to develop your back-end services using PHP. It does not matter which tool you use for that; it is a matter of preference/budget. You can use your WAMP installation, of course.
You may need to first concentrate on developing back-end data services using PHP, then look into how you would retrieve the results within FB (hint: the FB part is very simple and you will love it!). For instance, start with a PHP script which simply put together some sample XML, then have FB retrieve that XML using the HTTPService. Once you get the data into FB, it's up to you what you want to do with it.
Here is a simple PHP page you could start with:
<?php
//Output XML from PHP.
//Open tag:
$output = "<return_data>";
//Create element value:
$output .= "Hello World";
//Close tag:
$output .= "</return_data>";
print ($output);
?> -
Really basic Install help needed, please.
Assistance would be greatly appreciated.
Yes, I've searched this whole forum and probably don't know enough to ask the right "search" questions because I haven't found the answers.
Over the past few months, I've been learning Linux as I now plan to switch from Windows to a Linux distro rather than go with a new computer and Windows 7 and the associated problems. I have tried several Linux distros individaully side by side with Windows XP on a partitioned drive.. Most recently I've been using Linux Mint 8 'Helena' and done lots with and to it. Linux Mint 9 'Isadora' was just released, and since upgrading for a non-rolling distro is a nuisance, I thought I'd try a rolling one. After review and recommendations, I thought I'd give Arch Linux a try. Since most of my computer use is music via a Jukebox (14+k files), browsing, email and info seeking, I don't need all the bells and whistles whith which many distros come. I'm not a gamer.
Basic Infor:
PC with 1.4GHz Athlon, 512 Ram, 320 G Hard Drive partitioned equally between Windows XP and Linux (hopefully Arch). High Speed DSL.
What I need are some really really basic instructions on a side by side install of Arch.
SOofar, I've got the clock set, and have partitioned my hard drive into
SDA 1 (my Windows Partition)(160 Gigs
SDA5 1200mb for my swap
SDA6 20 Gigs for the root
SDA7 130 (the rest) Gigs for home
What I need to know is darned near everything else.
Bootability for SDA5-7
How to label (the method for) SDA 5-7
and thereafter a step by step really simple set of install instructions for a side by side installation.
I've searched on this forum as well as via Google, but simple instructions are nowhere to be found. I really have had no trouble installing Mepis, Madriva, Ubuntu, and Linux Mint side by side with my Windows Xp partition and done so for at least 2 of them with manual partitioning rather than the automatic side by side install offered.
With this introduction, can someone point me to a Arch Linux side by side install for Dummies or help me with a walk through??
Or am I in completely over my head and need to just go back to Linux Mint and plan to upgrade every 6-18 months? Or try a different rolling Distro???
Thanks in advance to any and all who can help..
DickWillie,
Were I certain I would be happy with Arch, there would be no problem doing as you suggest. However, looking backover at least 2 decades, our first computer was an IBM with an 8086 chip and 20 whole MB of hard drive. The choice of operating systems was DOS. As we moved onwards and upwards, Windows 95, 98, and XP were Hobson's choice for PC users (our office computer used Unix). Now with more experience and research, a new world of operating systems is available, especially for those of us with older computers which would require major (and expensive) upgrades when possible to move to Windows 7. And as with Windows ME, 2000, and Vista, there is probably potential for significant problems with 7. Utilizing my current ability to have 2 (or more) OS's on my computer affords the opportunity to learn more about them and develop my 'geekiness" as well as to evaluate and selectively choose one which will best meet my needs.
As of now, I have at least 3 problems with abandoing Windows XP completely:
1) I haven't found a Jukebox program for Linux equivalent to J Rivers' Media Jukebox which has seamless track switching, an equalizer, and DSP studio effects,etc. I've used WINE doors and made it run on Linux Mint, but the program will not recognize my CD-ROM drives. I have some 14+k music files and my computer jukebox runs through my home sound system.
2) I've some 600+ movies indexed on Movie Organizer (movieorganizer.org) which flat out won't run on the Linux distro's I've tried. Re-entering those 600+ indexed movies to another program will be a bear. So far, no one of my local sources or on the other various Linux forums has a solution. WINE doors won't do it as it needs MDAC.
3) For all its frailties and faults, I'm reasonably literate with Windows XP. Linux OS's are still, quite obviously, relatively unfamiliar to me (3 mos experience).. So until I'm much more conversant with Linux, better the devil I know.
I have installed and used both the Linux Mint 8 Fluxbox and KDE editions on more than one computer so it's not a question of my being shy. BTW, I'm a retired internist, and our speciality is known for being really nitpicky, detail oriented, and investigational, and I'm sure it shows.
Again, thanks to all for the suggestions and comments. I'll keep in touch.
Dick -
I feel like a complete novice for posting this kinda stuff, but i figured somebody would take 5 minutes and help me out. My final in my programming class depends on 2 programs, one of which is giving me some actual trouble.
What I have to do is create a java applet that allows a user to input their weight, select a planet, and then have their weight converted to what their weight would be on the selected planet. However, if the ouput is higher than 60 pounds, I need a picture of the michelin man to appear and the theme from star wars to play. If it is below 60, A multicolored asterisk should be displayed with applause.
I will post what code I have already made. Please note: ITS VERY VERY BASIC. I may have overcomplicated some things, and there is always more than one way to do something (in my experience). Also, I kinda just converted a temperature conversion applet, so there may be some extra stuff I don't need.
Please help.
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
public class tempsapp2 extends Applet implements ActionListener
Label prompt1;
TextField input1;
Label prompt2;
TextField input2;
int number1, number2;
int mercury, venus, earth, mars, jupiter, saturn, neptune, uranus, pluto, result;
public void init()
prompt1 = new Label ("Enter your weight:");
add (prompt1);
input1 = new TextField (10);
add (input1);
prompt2 = new Label ("Enter the Number of the Planet you would like to have your weight converted to:");
add (prompt2);
input2 = new TextField (10);
add (input2);
input2.addActionListener(this);
add (input2);
public void paint (Graphics g)
number1 = Integer.parseInt(input1.getText());
number2 = Integer.parseInt(input2.getText());
mercury = (number1*3780)/1000;
venus = (number1*9070)/1000;
earth = (number1*10)/1000;
mars = (number1*3770)/1000;
saturn = (number1*9160)/1000;
uranus = (number1*8890)/1000;
neptune = (number1*1125)/1000;
jupiter = (number1*2364)/1000;
pluto = (number1*670)/1000;
if(number2==1)
g.drawString("Your weight on Mercury would be "+mercury+" lbs",100,150);
else if(number2==2)
g.drawString("Your weight on Venus would be "+venus+" lbs",100,150);
else if(number2==3)
g.drawString("Your weight on Earth would be "+earth+" lbs",100,150);
else if(number2==4)
g.drawString("Your weight on Mars would be "+mars+" lbs",100,150);
else if(number2==5)
g.drawString("Your weight on Jupiter would be "+jupiter+" lbs",100,150);
else if(number2==6)
g.drawString("Your weight on Saturn would be "+saturn+" lbs",100,150);
else if(number2==7)
g.drawString("Your weight on Uranus would be "+uranus+" lbs",100,150);
else if(number2==8)
g.drawString("Your weight on Neptune would be "+neptune+" lbs",100,150);
else if(number2==9)
g.drawString("Your weight on Pluto would be "+pluto+" lbs",100,150);
public void actionPerformed(ActionEvent evt)
number1 = Integer.parseInt(input1.getText());
number2 = Integer.parseInt(input2.getText());
repaint();
}I am guessing that you are wondering where to go from here. If so http://java.sun.com/products/plugin/1.5.0/demos/applets/Animator/Animator.java may prove helpful.
Also I would recommend using arrays of planet names and weight multipliers. It could make your code a lot less cumbersome. -
Basic DVD Help Needed - More challenging than expected
Need help creating a basic DVD that a client needs. Here are the specs needed for the DVD:
No Menu
No Chapters
Can scrub forward and backward
Begins in DVD player in a stopped state
I can not seem to find an option to remove chapter 1 from the V1 timeline in DVD Studio Pro. Also when DVD is inserted into DVD player the video begins playing right away instead of beginning in a "stopped state" on the DVD player. Any help would be greatly appreciated.Make a black menu with a invisible button and link it to your track.
as for the chapter 1 - you can't get rid of this and is a good thing to have for what your trying to achieve anyways. That way the user can either hit play to start the video or they can hit chapter and it will play as well.
If you don't want them to be able to push anything other than play on their remote you can disable buttons. -
I am new to Dreamweaver 8 (but have worked with simple html a
quite a bit) and am working on building a, hopefully, simple
prototype for a project. What I need to do is collect user-entered
text and user-selected dropdown box data on one page and send it to
another for presentation there. After looking at the Help screens,
I looked at using Session variables and it seems that is the best
way to pass the data. Where I am stuck is in the (from Help
Contents) Making Pages Dynamic - Creating Forms - Creating HTML
forms help. They first say to, in step 2, Select Insert > Form
(which doesn't do anything - you have to click another option,
which I figured meant Form again). Then, in step 3, they say to
"Specify the page or script that will process the form data." by
selecting the file in the Action box in Properties. I don't have a
file to "process the form data" and don't really know what they are
talking about. Help!
I originally (before I reverted to using Help) set it up with
Insert->Form->Text Field text entry boxes, figuring this was
a Form field that could be captured and passed on. Right? Wrong? I
guess I thought the method would be to define a variable name
associated with a text input field in one page, then pass it with
the value to the next page. That is pretty much what it seems
Session variables do (?), which I discovered when I started looking
at Help.
So, was I on the right track for a simple implementation and
missed the way to capture and transmit the data, or do I need to
use the Forms->Forms option? If the former, how do I define the
variable names? If the later...well, I am real confused then. :-)
Thanks for your help.
(btw, we do have training material coming - went with
Dreamweaver for Dummies, Peachpit Macromedia Dreamweaver 8 Hands-On
Training "dead tree media" and TechRepublic Fast Track Dreamweaver
8 CBT. Any opinions on those?)Session variables as the name suggests are created when a
user starts a session and last till the session is open. You form
doesn't really need session variables unless you are carrying form
data from one page to another and need to keep it associated with
that specific user such as in shopping cart applications.
I have never used the dreamweaver insert form, so can't help
you there. why not code the form yourself, especially since you
have been using html
The link below may help.
http://www.w3schools.com/html/html_forms.asp -
I am recording a song that consists of 3 tracks total. I have cut out the parts that are not needed while maintaining the position of the remaining sections. How do I record a final mix that is only one track? Or, how do I burn these tracks to a disc? Basically, I have the recording and editing process done, but now I need to place the music on a disc, or at least have it all saved as one track.
THANKS!
LMZWell, I assume since you're in the Logic forum, you are using Logic on your project.
What you're talking about is called bouncing. This means creating a 2-track mixdown (one track for the left, one for the right). Fortunately, this is easy: just go to File and choose "bounce". From there a window will open giving you several options. If you choose to bounce as AIFF, you can take the resulting file and burn it as an audio CD in Toast or iTunes. Or better yet, you can choose "burn" which will put your smash hit directly on a disc.
See how easy that was? Now have a pancake.
macbook pro Mac OS X (10.4.9) -
I can not find where I can view the entire project info size. I know how to view each clip info size but not entire project size. So where can I view entire project info size. Thanks...Newbie to FCE.
Thank you, Tom that was easy. I don't know why I could have thought that as well. Tom by the way when want to burn a video and slidshow all in in one DVD what are options do you use?
-
I consider myself fairly self reliant, but I cannot figure out how to get "batch rename" to work. I don't think I understand how to utilize automator in it's basic essence. I have large folders of randomly named jpegs. I would like to rename them by topic. I have tried to program and initiate the batch rename automator, but the process does not change the files. Can anyone offer me a step by step, idiot proof, direction of how to do this properly?
I would greatly appreciate some assitance.Hi, David. Automator is perfectly suited for this task. In fact, you're in luck. Apple has written an excellent easy-to-follow guide that walks you through precisely the project you describe!
http://www.apple.com/macosx/features/automator/example1.html
Good luck, and happy automating.
PowerMac G5 (June 2004) 2x1.8GHz 1.25GB, PowerBook G4 (12-inch DVI) 1x1GHz 768MB Mac OS X (10.4.3) -
I've been tasked with establishing some communication between a spectrometer (interfaced with by a laptop) and a process skid on a Profibus network to have data such as concentration/total mass/etc. appear on it's hmi. Ive had success in writing a program in C# that mapped this data to analog signals via an NI 6009 and the nidaqmx api to communicate with other skids but am at a loss when it comes to serial communication, how would this connection be established? Could I similarly map the data using some digital i/o device an/or Profibus interface module? I apologize, I'm completely new to this sort of thing, and any sort of Product/Resource recommendation would be much appreciated.
Hi mbatc,
What devices are you trying to communicate with? Are you looking to communicate using a compactRIO or PXI/PCI device for your PROFIBUS communication? Are you looking to communicate in LabVIEW or a different programming language? In terms of LabVIEW, we have our cRIO PROFIBUS module, and was also have PXI/PCI format. We also have examples available to help guide you with using the PROFIBUS modules. I encourage you to take a look at the examples we include with the cRIO PROFIBUS driver. Additionally, please take a look at the getting started material we have available for PROFIBUS. Let me know if you have any questions!
Matt S.
Industrial Communications Product Support Engineer
National Instruments -
actually i m working on labview programming..my sub vi is working but when I use it in main vi its not working.. i know its the problem of dataflow but I could not find the solution to my problem..please anone help me out
Attachments:
subvi.vi 39 KB
mainvi.vi 7 KBthe way how you call a SubVI was not ok. I hope it works now.
see attached VI.LV Version 2009
Message Edited by FHM on 06-10-2010 09:35 AM
Attachments:
mainvi.vi 26 KB
subvi.vi 16 KB -
K all i am trying to do is Make an array of 5 int and then make a small basic test program that returns the smallest index of the matrix. Now the way i am doing this i want to make two files and make a call to the method that i createded called getSmallest of the public class SmallestIndex. The reason i am doing it this way nstead of putting the code in the main method is because i want to learn to pass arrays as parameters . I am learning them for the first time. This is my code:
import java.util.*;
import java.io.*;
public class SmallestIndex
public static int getSmallest(int[] matrix)
int minIndex = 0;
int smallestmatrix;
for(int index = 1; index < matrix.length; index++)
if(matrix[minIndex] < matrix[index])
minIndex = index;
smallestmatrix = matrix[minIndex];
return smallestmatrix;
public static void fillarray(int[] matrix, int numofelements) throws IOException
BufferedReader board = new BufferedReader(new InputStreamReader(System.in));
StringTokenizer tokenizer;
tokenizer = new StringTokenizer(board.readLine());
for(int index = 0; index < numofelements; index++)
matrix[index] = Integer.parseInt(tokenizer.nextToken());
if(!tokenizer.hasMoreTokens())
tokenizer = new StringTokenizer(board.readLine());
public static void printArray(int[] matrix, int numofelements)
for(int index = 0;index < numofelements; index++)
System.out.print(matrix[index] + " ");
import java.io.*;
public class TestMatrix
static BufferedReader board = new BufferedReader(new InputStreamReader(System.in));
public static void main(String[] args) throws IOException
int[] matrix = new int[5];
for(int index = 0; index < matrix.length; index++)
matrix[index] = Integer.parseInt(board.readLine());
System.out.print("Elements");
SmallestIndex.printArray(matrix, matrix.length);
//SmallestIndex.fillarray(matrix);
//SmallestIndex.getSmallest(matrix);Here's something slightly different. Compare to yours to see differences
import java.io.*;
class SmallestIndex
public SmallestIndex()
int[] matrix = fillArray();
printArray(matrix);
System.out.println("Smallest = " + getSmallestNumber(matrix));
System.out.println("Index of smallest = " + getSmallestIndex(matrix));
System.exit(0);
private int[] fillArray()
int[] temp = new int[5];
try
BufferedReader board = new BufferedReader(new InputStreamReader(System.in));
for( int x = 0; x < 5; x++)
System.out.print("Enter a number: ");
temp[x] = Integer.parseInt(board.readLine());
catch(Exception e) {System.out.println("error - " + e.getMessage());}
return temp;
private void printArray(int[] arrayToPrint)
for(int x = 0; x < arrayToPrint.length; x++)
System.out.println("Element "+ x + " = " + arrayToPrint[x]);
private int getSmallestNumber(int[] arrayToGetNumber)
int smallest = arrayToGetNumber[0];
for(int x = 1; x < arrayToGetNumber.length; x++)
if(arrayToGetNumber[x] < smallest)
smallest = arrayToGetNumber[x];
return smallest;
private int getSmallestIndex(int[] arrayToGetIndex)
int smallest = arrayToGetIndex[0];
int smallestIndex = 0;
for(int x = 1; x < arrayToGetIndex.length; x++)
if(arrayToGetIndex[x] < smallest)
smallest = arrayToGetIndex[x];
smallestIndex = x;
return smallestIndex;
public static void main(String[] args){new SmallestIndex();}
} -
WLAN Controller basic configuration help needed
Please advise me for the initial config. of wlan controller. if found following parameters needs to be configured for initial config. of wlan controller.
Enable Link Aggregation (LAG) [yes][NO]:
Management Interface IP Address:
Management Interface Netmask:
Management Interface Default Router:
Management Interface VLAN Identifier (0 = untagged):
Management Interface Port Num [1 to 2]:
Management Interface DHCP Server IP Address:
AP Transport Mode [layer2][LAYER3]:
AP Manager Interface IP Address:
AP-Manager is on Management subnet, using same values
AP Manager Interface DHCP Server (192.168.50.3):
Virtual Gateway IP Address:
Please advise me what these parameters mean. I'm new to wlan controller.
Please advise.
Thanks in advance.Enable Link Aggregation (LAG) [yes][NO]: Yes
Management Interface IP Address: ex - 192.168.1.2
Management Interface Netmask: Ex- 255.255.255.0
Management Interface Default Router: 192.168.1.1
Management Interface VLAN Identifier (0 = untagged):(Hit enter no need to fill this)
Management Interface Port Num [1 to 2]:1
Management Interface DHCP Server IP Address:
AP Transport Mode [layer2][LAYER3]: LAYER 3
AP Manager Interface IP Address: ex - 192.168.1.3 (same subnet that of Management interface)
AP-Manager is on Management subnet, using same values
AP Manager Interface DHCP Server (192.168.50.3):
Virtual Gateway IP Address:1.1.1.1 -
Hi,
I have an Epson 3800 printer and Adobe Elements 7 (Epson advised me that I should buy some version of Photoshop to take full advantage of the printers capabilities).....Problem is need basic info on how to set all the buttons to make a decent print. There are many,many choices on various drop down tabs all through the process of making a print. Also, It seems that all my pictures are 72 ppi ...is this a default setting ? Or, did I do something wrong when I downloaded them from my camera ? PLEASE help ! If at all possible someone could guide me through the process step by step I would be very, very grateful. I need guidance from the download, through the myriad of buttons (ie: color management, size selections (why do I have to tell both Elements and the printer the size of my paper?!!$#@) what's up with 72ppi on all my pics, if i change to 300 ppi wont pics get worse ? )
I called Epson and asked them to walk me through a print but they wouldnt because they said I'm going through Elements first and that is not their responsibility! BUT THEY ADVISED ME TO GET ELEMENTS IN THE FIRST PLACE !!!
Please help...I am an artist (painter) ...my website is www.theeastcoastartist.com I will send a free 8 X 10 signed print of a painting to anyone that can help me get a decent print or just tell me which settings to make each step of the way.
Thanks,
FrankFrank, here's a couple links to tutorials that may help. They use Photoshop but the print settings in Elements are similar enough.
http://www.wonderhowto.com/how-to/video/how-to-print-from-photoshop-to-the-epson-stylus-pr o-3800-260408/
http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html
As far as the resolution, stated in pixels per inch (ppi), the images from your camera have a fixed number of pixels, so resolution is determined by the size of the print...the larger the print, the larger the pixels, the lower the resolution. 300 ppi is considered optimum for printing...higher won't hurt, lower than 250 ppi may start to be noticable. -
Help needed for using BASIC authentication through JDBCRealm
Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
<Realm
className="org.apache.catalina.realm.JDBCRealm"
driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
connectionName="username" connectionPassword="password"
digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
userRoleTable="user_roles" roleNameCol="rolename"
/>
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------
Maybe you are looking for
-
the file looks to be in the correct format and I have created similar data definitions--can anyone see something that I am missing? any help is very appreciated
-
JVM Crashes with a VM state:not at safepoint (normal execution) error
Hello. I have been battling with this error occasionally ocurring for months. There are many suggestions in various blogs and they all seem to think it's a JVM bug. I'm not so sure. I am running JBOSS 4.0.5 on SuSE Linux 10. JVM is Java HotSpot(TM) S
-
Imovie 11-I can't get rid of the filmstrip in the full screen viewing?
I'm using I-movie 11 on a Macbook pro 2011. I can't get rid of the filmstrip when viewing the video I made in full screen mode.
-
Scrollup and down icons not working in ALV. Please help!
Hi Experts, I have a ALV webdynpro ABAP report. I have to show only fixed no of rows. But the scrollup and scroll down icons in the ALV (^) not working when I use subtotal (aggregation). Interestingly scrolling works perfectly if
-
Hi, were currently building a large Flex (AIR) application using Flex Builder 3 and I need to setup a build process that outputs a single .air package via a BAT file. Can anyone give me pointers on the way to do this. They guys at work want to use AN