Basic install question for Flex on CF 7.02

Hello,
I've been trying to get Flex working on CF 7.02 and I'm
reading very different and conflicting stories.
Firstly I have CF 7 running on 2003, and then installed the
updates for7.01 and then 7.02 .
I installed as a single server instance.
Reading here, I just need 7.02 and I should be fine
http://www.adobe.com/devnet/coldfusion/articles/fr_fds.html
This here tells something completely different, with lots of
config files
http://www.adobe.com/support/documentation/en/flex/1/flexforcf.html
What is most annoying is that I had it working on a local
server and it was fine. But this was installed over a year ago, and
I don't have a steps taken that made it work. That server is now
being used for something else.
I don't know if I need the FDS or Lifecycle to be installed
as everything I read says FDS is part of CF.
I have also read that FDS express can be downloaded and run
on a Java server, and that it doesn't need cF, but this in not the
solution to my problem..
To summerize:-
I need to get Flex apps running on CF 7.02 in a production
environment.
Do i need do install anymore than CF, if so how much does it
cost?
I'm not a CF programmer, and don't know much about it, I
usually deal with MS stuff
Thanks very much

Thanks again EJ, I really appreciate your ongoing help here. With some difficulty I was able to post this;
https://communities.oracle.com/portal/server.pt/community/view_discussion_topic/216?threadid=380585&Portlet=Create%20Discussion&PrevPage=Communities-CreateDiscussion
I just want to verify this new community is set-up correctly; I have two accounts for the Oracle site, this one (linked to my gmail email) and another linked to my work email (I can log support cases with the latter).
I'm not able to hit that community from this account (linked to my gmail email), the error I get is;
We are sorry, we could not log you in. We apologize for the inconvenience. One of the following might have happened: You don't have a valid Customer Support Identifier. Your privileges are not up to date. This should be resolved by logging in into My Oracle Support. Internal error in the login process.
The bit about the support identifier in the error message led me to try my work account - with some trouble I was able to get in and post the question above.
Is this new community only open to people with a support identifier?
EDIT>>>>: Getting that error with both accounts now. I realize you don't "support the forums", just let me know if you think the new forum has been setup correctly. Thanks again EJ.
Paul
Edited by: Paul Smith on 21-Jun-2012 12:35
Edited by: Paul Smith on 21-Jun-2012 12:38
Edited by: Paul Smith on 21-Jun-2012 12:38

Similar Messages

Install question for you multiple system guys

Running a half dozen Macs, I have acquired several copies of Final Cut over the years, all full copies, legit and registered. For the purpose of this question, I'll say I have;
1) A full copy from 2/05 (with just FCP 4.5, Soundtrack, Livetype, etc.).
2) I have Suite from 4/05 (which includes FCP 4.5, Motion, DVD Studio Pro 3, etc. to the mix).
3) I have a full copy of Studio from 8/05 (which includes FCP 5, Motion 2, DVD Studio Pro 4, etc.).
I like to be able to have any machines running simultaneously on my network without getting that "have to close" message. Since I've bought a new copy of FCP with every computer, this is really only an issue when my Powerbook is up and running at the same time as the others because I've always had one of the FCP programs installed on one of my towers and my Powerbook. All legit.
For a variety of reasons, I'm about to scrape my Powerbook and reinstall the OS (10.4.5). I intend then to reinstall FCP on the Powerbook. That brings me to my question.
Which version should I install?
If I choose the Studio package (option 3 above), can I selectively install just FCP, DVDSP, Livetype and Soundtrack and, since Motion won't run on my 1G Powerbook, skip that program? I'd be up to date on all the programs and ready to go. Now, I'd rather not install Studio because that's on my personal tower and there a better chance I might want to have that one and the Powerbook running simultaneously.
I can reinstall the version that's on there now (option 1), the basic FCP 4.5 but I'll need to upgrade to 5.0 so I can move projects from my main editors to my Powerbook. But, there's no DVDSP on those disks.
Or, I can install Suite (option 2) and get DVDSP 3, FCP 4.5, Soundtrack, etc. and buy an upgrade. But again, the question comes up as to whether I can leave Motion out of the install.
One other note, I don't mind paying for an upgrade at all. I like everything registered and up to date.
Thanks for taking the time to read this and TIA for any help you might offer.
Pete

On the Suite... Motion is on a separate disc. It is your option to install or pass.
IMHO, for consistancy in production, you need the same version on all machines. If that means install 4.5 - then upgrage - or whatever - it needs to be the same. We had one machine on a different version for about 2 weeks. Drove us crazy.
Keep all the same version.
As for haveing one FC license on desktop and Laptop - if it's legit - then it's only a problem if you are editing on both. I often have mutliple projects open - but you'd have to be pretty talented to be editing on two machines in FC at once. Either really talented or not really productive.

Premiere Elements 7 Basic Editing Question for DV

Hello all,
I have PE7, a Q6600 quad-core, and Windows 7 64bit.
I have captured about 6 hours of Standard Definition 16:9 DV footage from my church's grand opening ceremony. Video was captured from an old Pana PV-GS320.
The church wants a dynamic video to be produced from the captured footage (60 minutes at the most in length). I plan on doing many different effects including semi-transparent video layering, picture in picture, inserting photographs, and inputing audio clips from the ceremony. The final product will be a standard definition DVD disc.
I've done some research regarding how DV is interlaced and output for DVD should be interlaced (unless I'm wrong in that conclusion, let me know). I also know that doing heavy editing with interlaced footage (slowing/speeding footage, zooming in and out, rotating, multiple layering, etc) may create flickering and "mice teeth" in the video. I've also searched through these forums and keep on running into HD questions/solutions... I guess I'm asking an old question that was probably answered long ago when DV tape ruled the world.
QUESTION 1:
So, if I may ask, in order to get the best results, should I prepare my raw footage in PE7 before editing it by (1) by deinterlacing it? (2) exporting it as progressive? (3) both? (4) leave it alone and begin editing away? or (5) am I missing another option?
QUESTION 2:
Also, what resolution would be best to import the photos into the project?
I know the best way to work with any video is to make as little changes as possible to it, but this is unavoidable in my case. No one wants to sit through 6 hours of video...
Thankyou very much for reading my questions and I really hope you have some time to answer it! Thanks for any information! I really appreciate it!
-141rockwell

Relax, rockwell. You're making it all unnecessarily complicated.
If you've captured your video as DV-AVIs over a FireWire connection, you won't get "mice teeth" in your final product. The program is designed to work with interlaced video and create interlaced DVDs. The results should look virtually as good as the original footage! You can't damage video with "excess editing."
Just trust the program to take care of the technical issues. You can concentrate on the editing.
As for any photos you want to add, you'll get the best results if they're no larger than 1000x750 pixels in size, per the FAQs to the right of the forum.
http://forums.adobe.com/thread/431851?tstart=30
Meantime, if you're looking for some basic help with the program, be sure to check out my free 8-part Basic Training tutorials at Premiere Elements support site Muvipix.com.
http://forums.adobe.com/thread/537685?tstart=0

Re-install questions for Logic Pro 8

I have recently switched from a G5 to the new Mac Pro. I installed the two hard drives from my G5 into slots 2 and 3 on my Mac Pro. Each is 300GB. Slot 1 is the 320GB hard drive that came with the Mac Pro. My plan is to use the main drive (slot 1) for all other applications, do a clean install on my second 300GB drive (slot 2) and update to Mac OS 10.5, then re-install only Logic Studio on this drive. I use my third hard drive (slot 3) to record audio to. I will probably add another hard drive to slot 4 to use either for virtual instruments (Vienna Strings, Wallander), or use it as backup for my system.
I am a long time Logic user (since 1995) and have been continually updating, my last update being to Logic Studio from Logic Pro 7. I want to avoid any unforeseen issues with re-installing from an update, so I would really appreciate any advice on the best procedure to accomplish this re-install. I also am intending on keeping an alias of Logic Pro 8 on the dock of my main drive to open and use Logic from my second drive, and will store all logic song files on the second drive with the application, and continue to record audio to the third drive, as mentioned above. Any helpful wisdom or suggestions for improvement on this configuration would be great too, but I'm mainly asking for help on Logic Studio re-install.

Happy New Mac
My plan is to use the main drive (slot 1) for all other applications, do a clean install on my second 300GB drive (slot 2) and update to Mac OS 10.5, then re-install only Logic Studio on this drive.
That's fine except that most applications (and certainly Logic) have to be installed on the boot drive, and the library or user library +on that drive+ will contain all library files such as application support, preferences etc.
I use my third hard drive (slot 3) to record audio to
That's where old and new Logic projects should live.
I will probably add another hard drive to slot 4 to use either for virtual instruments
Good idea.
or use it as backup for my system.
I'd suggest an external drive for backups, with a basic system on it in a separate partition, solely used for emergencies. Most of the time it should be 'off' except when actually backing up.
and will store all logic song files on the second drive with the application
Shouldn't they be on your 3rd. drive? All projects, old and new, should live on that, I think.
Also, be aware that if you plan to install Logic 7 (for old projects) re-install this first, before you install Logic 8. You can't do this in the wrong order. This will be on the same boot drive and Logic 8 (and your system).

OUAF Application Framework install question - for Oracle Utilities SDK 4.0

Hi,
I hope someone can help me, I am really confused.
I have a working install of MDM 2.1 and everything is working.
Now I need to install the OUAF SDK to start coding in JAVA but since I a mstill new to all this I dont really understand where the Application server is. I though that I installed that already. But it is not found in C:\ouaf\demo.
I have the framework installed, I do not understand why the SDK is telling me wrong folder.
Oracle Utilities Application Framework V4.1.0 Multiplatform is the one I have installed.
Here is the install doc:
http://www.box.net/shared/k86v1a4gtc793ho1zc20
Here is part of the install doc:
• OUAF Application Server in 32-bit and development (exploded) form. The installation will prompt for the folder name where this is installed. Note the first 2 digits of the versions (e.g. “4.0”) of both the SDK and application server must match.
I found the patch number to the SDK here: (but where do I find OUAF app server?)
http://blogs.oracle.com/theshortenspot/entry/new_releases_of_oracle_utiliti
10043375 - Oracle Utilities SDK 4.0.0.4 (for OUAF V4.0.2 based products).
Edited by: LodestarGuy on Jul 3, 2011 11:57 AM

Actually it did mess up. App server not starting anymore. The folder structure did not change also.
Here is the config env screen after the changes:
http://www.box.net/shared/rb0pe1ubi4vsgyvv8ok6
And here is the error:
http://www.box.net/shared/sqcnvpgdyyoevoy8fh0b
Thank you for looking into this.

FIOS Install Question For Disabled Person

I am scheduled to have FIOS TV/Internet installed tomorrow. I have a question:
The box that will be installed that is normally attached to an exterior wall...Can that box be installed in my garage, and can the box be placed in a low position that will allow me access from my wheelchair?
Currently I have TWC cable/DSL and the exterior box is attached to a wall outside my garage close to the electric meter. I would like the FIOS box inside so I can access user servicable areas.
Thanks,
Dave in Plano, TX
Solved!
Go to Solution.

retiredme wrote:
If you are referring to the ONT, there are really no user serviceable areas that I know of. There is no reason to have to access it, so that is why it is often placed outside. However, you can ask the installer your question since they will be installing it. They need to be able to run a coax cable into the house from the ONT, to a splitter, and then disperse coax cables to the router and whatever STB/DVRs you have ordered.
Their are a few user serviceable areas. But they are rarely of interest. Essentially the monitor lights and the area where user connections to phone lines and coax are connected.
The battery area, sometimes in an enclosure with the ONT but often seperate, needs to be where it can be easily accesed so make sure that is mounted where a disabled person can access it.

PSE 8 install question for Mac PowerBook G4, "Does not support PowerPC architecture CPU..."

I am getting the following message during attempted install of Photoshop Elements 8 for my Mac PowerBook G4 (OS 10.4.11):
"This product does not support PowerPC architecture CPU. Please upgrade or adjust your system to meet these requirements."
I double-checked system requirements listed online before purchasing software, and also checked requirements listed on outside of box before opening it. All looked fine,
Searching Adobe help has turned up nada, any thoughts out there?
Thanks in advance,
Laura

Hi Laura,
I guess you must have missed something or misinterpreted something. Please check the requirements mentioned on the web page: http://www.adobe.com/products/photoshopelmac/systemreqs/
which clearly says that it needs an Intel® processor which means an iMac machine, Mac PPC are not supported in PSE 8 anymore.
Regards,
Ankush

Basic Install Question

I've run previous version's of OS X, and can't recall having this occur. After repartitioning/wiping the drive, I've noticed that on trying to save the install log, there exists a Directory "root" (with a home icon), followed by a subdirectory of "Library," followed by a file called "globalpreferences.plist"
The only reason I ask is because after erasing and repartitioning the drive, I wouldn't expect this directory to exist midway or even right upon starting the install and trying to save the log.
Any info would be appreciated.....

Indeed, I think it may have been meant for Private>Var>Root.
Wrong Install Disks?

Newbie deployment/install question for JRC

I did some searching and reading the SDK doc, but it's mostly silent on the topic of how you set things up.
I have Crystal Reports 11 Developer edition (not Eclipse). I'd like to create a simple JSP app which displays a crystal report in a browser, on my Java app/web server. (And lets the user output/view it as PDF.)
I think I can use the JRC to use this, but, I don't know what needs to be deployed to the Java web/app server to make this happen. Can anyone elaborate on what files/directories need to be there? Where do I get them, from my Designer PC in "C:\Program Files\Common Files\Business Objects\3.0\java\lib" or elsewhere?
Thanks in advance.

Excellent!
Â http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2016910
thank you!

Setup basic install as a service on XP

Just wondering if anyone knew how to create a service in the control panel to start and stop SOA suite (Basic install). For some reason only the advanced version creates the service by default.
cheers
James

Hi,
How to run BDB as a Windows Service and
how to start the BDB with a simple inital
database like the Postgresql DB or MySQL?Berkeley DB is an embedded database which provides fast, portable, reliable, local persistence with zero administration.
As an embedded databse Berkeley DB is in fact a transactional storage engine for un-typed data in basic key/value data structures. Thus, Berkeley DB can't be run as a windows service, the way other RDBMSes act. Berkeley DB comes with libraries that you can integrate with your application and various useful utilities. There isn't a web interface nor an administration tool like phpMyAdmin for MySQL to manage your Berkeley DB databases, this is done via the APIs provided by Berkeley DB.
Regards,
Andrei

Exchange 2013 Site Resilience - Basic questions for setup in two seperate AD Sites, same domain

I am just getting ramped up with Exchange 2013 and have a friend that I am assisting with planning an exchange 2013 deployment for. I am not asking for step by step directions for setup, just asking for a basic overview so I can dig in to this and
assist.
Goal is to have an exchange server, one in NC and one in Switzerland in an active/passive mode for site resilience. Both servers will be multi role servers.
This is a small organization, less than 50 users and on a budget for equipment. HQ is in NC and the server will have all roles installed on a single server. Switzerland will have only one Exchange server for fail over. There is only
one domain total with two AD Sites.
My questions for clarity -
1. Can I create a Site resilient deployment with two Exchange Multi Role servers in these locations?
2. Currently, the organization does not have a Load Balancer. Will this be required?
3. They do not have a third location for a Witness Server, what issues could potentially happen if the witness sits in one of the two sites?
4. Any other basics for this design are much appreciated. I am reading a lot, however a little confused as I read through the requirements.
Thanks for your input and direction!
Wall

Hi
Please find below answers to your questions.
1. Can I create a Site resilient deployment with two Exchange Multi Role servers in these locations?
Yes
2. Currently, the organization does not have a Load Balancer. Will this be required?
No you don't need to have a load balancer. As you are setting up the infrastructure in Active / Passive mode you don't need a dedicated LB for this.
3. They do not have a third location for a Witness Server, what issues could potentially happen if the witness sits in one of the two sites?
The issue with the witness server in primary or DR site is if your witness server is not responding your DAG won't work properly (failover). If you don't have a 3rd site then you can setup a witness server in your primary site and Alternate witness server
to your DR site.
4. Any other basics for this design are much appreciated. I am reading a lot, however a little confused as I read through the requirements.
I would recommend to use Exchange sizing calculator and technet is the best resource for you :)
Kindly mark this as answer if it fulfill your requirements. :)
Regards, Riaz Javed Butt Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365

Question for installing Solution Manager & ECC 5.0

Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
The message from startsap log file is
"running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
CreateNamedPipe for
saptest02\pipe\SAP01_03 Failed, Extended Error #2
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
Is my installation process as following correct?
->SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
install Oracle9i Client 9.2.0.1.0->Administrator
Thanks a lot

Hi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
I did not install client, is this correct?
2.After install this, I run the sapins.exe but show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
Thanks.

Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

Here's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

HT4792 So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version i

So I have a question for this: I folowed this procedure, but when I'm trying to import the IOS from IMovies in my laptop I receive a message that states that the IMovie version installed doen't supports IOS files, although I have the last version installed with all the updates... Any ideas, thoughts?
Thanks

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

Is there a way for Flex to detect whether the Java Plug-In is installed?

Hi All,
Need your help.
Is there a way for Flex to detect whether the Java Plug-In is
installed? This may be require a JavaScript External-Interface. Can
we get if the Java Plug-In is installed and if so, whether it is
JRE 1.6.X ?
Regards,
Amit

Not knowing what server your app will run on... but something
like that can be done relatively easy serverside with for instance
ImageMagick if you run PHP.
Otherwise, look into Bitmap programming.

Basic install question for Flex on CF 7.02

Similar Messages

Maybe you are looking for