Basic landscape question in 2004s environment

Hi All,
This may be a bit repetitive..but I couldn't find the exact answer. Hence raising this.
We have a BI7.0 box and EP6.0 box. But EP is not connected to BI as of now.
1. Do we need to install EP7 and BI java additionally on this BI box or do they get
installed by default?
If yes, how to activate them? since 3.x web reports are running fine but 7.0 are not.
2. what is a federated portal? i saw a detailed blog..a simple explanation will help a lot.
any help is highly appreciated.
thanks
vishno

Do we need to install EP7 and BI java additionally
> on this BI box or do they get
> installed by default? --> Yes, this has to be installed seperately, can be on the same server (hardware). See attached document for the different options on landscape.
https://websmp206.sap-ag.de/~sapdownload/011000358700005089192006E/NW04s_BExWebSysLandscapes.pdf
 what is a federated portal? i saw a detailed
> blog..a simple explanation will help a lot. --> In a complex landscape if you have different Portals you can have one central portal as the consumer portal and diffrerent producer portals (BI, CRM etc.)
Check the diagram in the link below.
http://help.sap.com/saphelp_nw2004s/helpdata/en/67/7e70424edcc553e10000000a1550b0/content.htm

Similar Messages

Basic iPhoto questions:

I have some Basic iPhoto questions before I start using the program:
- does iPhoto apply any compression or change images in any way when they
are imported?
- after images are imported, can the original source folder of images be deleted off of the mac?
- can Quicktime files exported from iPhoto be viewed on a Windows computer?
- can iPhoto handle large resolution images that might be as large as 8-15mb each? does it display them quick? are there any known file size issues?
Thanks!!!!

kat.
Is there a way to use iPhoto on a network so other users can read and possibly write to an iPhoto library on a networked mac?
iPhoto is a consumer level photo organiser, not a server. It's possible to share photos but libraries are very difficult and fraught with the danger of database corruption. Some have reported success.
Is it possible to password protect or secure certain images in the library so they can not be seen by anyone?
No. The best I can suggest there is to create a second library and store it in a secure area like a protected dmg. But remember, you can only have one library open at a time.
After photos are deleted from iPhoto, are there any remaining traces or cached files anywhere other than the trash
If you delete photos from iPhoto and empty the iPhoto trash then the pics are removed from the Finder as well. They remain as findable as any other deleted file from that point, which is, very, if the searcher in knowledgeable.
Regards
TD

Object class deployment - Basic form question

OK, I subclass calendar object from Oracle provided standard
object class. What do I need to deploy to use this form now
apart from calendar.pll and my fmx. What about the object class
from which I sub-class. Do I need to compile and deploy that
also? How will form resolve this on run time the parent object
class as I really did not copy, just sub class and we do not
deploy original class? Basic form question. Thanks.

You can set the "help" property on the field (which gives you the little "information" icon link beside the field).
You could also try adding another field of another class above or below:
<Display class='InlineAlert'/>
<Display class='ErrorMessage'/>
<Display class='HtmlPage'/>
..etc
-Rob

Adding Date/Time Field + X Number of Days - Basic Calculation Question

I am assuming this is a basic calculation question. New to Adobe LiveCycle Forms.
I have a simple form containing a table. The table appears as such:
Text
Formatted as Date/Time Fields
Header 3
Monday
user wil choose the beginning date (Date/Time) this is DateTimeField1
Tuesday
this should calculate DateTimeField1 + 1
Wednesday
this should calculate DateTimeField1 + 2
Thursday
this should calculate DateTimeField1 + 3
Friday
this should calculate DateTimeField1 + 4
Saturday
this should calculate DateTimeField1 + 5
Sunday
this should calculate DateTimeField1 + 6
Calculations are performed after the date is chosen for Monday. My mind tells me the simple calculation of DateTimeField1 + 1 is not going to work (and in fact doesn't!) as it needs to change Monday to a number first. I saw on another thread the following:
Num2Date(Date2Num(Date(DateTimeField1), "DD.MM.YYYY")+7, "DD.MM.YYYY")
Thought this was going to get me close. No cigars though!
Any quick help is greatly appreciated. And since I am new to this, details about what needs to be changed would be great too!
Thanks

Here an addition for you date field.
This FormCalc script in the exit:Event will check it the selected date is on a monday.
If not it will go the days back until the last monday.
var Selection = Date2Num($.formattedValue, DateFmt(2))
var WeekDay = Num2Date(Selection, "E")
var NewDate
if (WeekDay eq 1) then
          NewDate = Selection - 6
elseif (WeekDay eq 3) then
          NewDate = Selection - 1
elseif (WeekDay eq 4) then
          NewDate = Selection - 2
elseif (WeekDay eq 5) then
          NewDate = Selection - 3
elseif (WeekDay eq 6) then
          NewDate = Selection - 4
elseif (WeekDay eq 7) then
          NewDate = Selection - 5
else
          NewDate = Selection
endif
$ = Num2Date(NewDate, "EEE DD.MM.YYYY")
Hope this helps, too.

Two Problems within the Small Basic landscape

The Small Basic of things.
There are 2 situations in the Small Basic landscape that I think are a bit disappointing and possibly reduce growth opportunities for the SB community:
Programs don't always run in the browser; and
Program Delay is retarded when the SB ide is closed. (big issue for gamers)
Nonki has a workaround for 1 and I've done a workaround in the past for 2 (awaiting test feedback on this).
I think it would be opportunistic and more efficient if it were easier for SB devs to supply programs and code for audiences that have SB installed and those who don't.
The only possible advantage I see with this situation is that it requires SB coders to learn how to deploy workarounds.
It would be a lot simpler if workarounds weren't required.
Any thoughts?
PS
Feedback on issue 2.

Apple says they are aware and working on it. The Sound is "not" lost and may be retrievable after their fix. It is an iMovie problem. It may take a while as they are preoccupied with the new "Mountain Lion" release. In the meantime I am saving my movies on my MacBook. If you can record your sound with a setting other them FPEG 2 that may help. I can't, so I am stuck. Big trip to NWT in late August so I am holding my breath. Hope they are faster than fixing the Numbers upload to iCloud.

E-Rec 300 as EFP, landscape question

Sorry, wrong forum. Post moved to E-Rec 300 as EFP, landscape question
Message was edited by:
Shehryar Khan

Hi All,
also have requirement of modifying Standard Workflow WS WS51800008.
I have done following setting in SPRO.
SAP E-rec->Technical Settings>Workflow--> Click On documentation of Set Up Approval Process for Requisition (Workflow) and there it has given you the clear Explanation about defining parameters in the Txn WF_EXTSRV
after this i did GENERATE TASK and it generated a new TASK. but in this config it asks for Logical system and i am not sure which logical system i have to give so i have kept is blank..
so is this Logival System Necessary?? and how to maintain it..casue it is not maintained in SM59..
I have also done URL settings in WF_Handcust.
Also in SICF when i tested my service /sap/bc/bsp/sap/hrrcf_approval/application.bsp it gives me following error...
SAP Note
The following error text was processed in the system:
BSP Exception: Das Objekt default.htm in der URL /sap/bc/bsp/sap/hrrcf_approval/default.htm?sap-client=668&sap-sessioncmd=open ist nicht gültig.
so gurus kindly suggest me what should be done to make this workflow running...also i m modifying this workflow to add 1 dialog task so do i need to make this entry foe this task in SWFVISU??
thanks in advance....

Basic Exporting Question

My main question is a very basic exporting question, but here is a super-condensed explanation of my big-picture goal for context:
Large (~450 MB) aiff on CD --> trim w/ Quicktime --> small (~16 MB) MP3 in iTunes
I would like to take an audio file (aiff) that is approximately 450 MB and export it from Quicktime and in doing so, reduce the file size and convert it to MP3. When I simply try to export it, it doesn't ask me about what size I want, nor does it give the option of MP3 formatting.
I have figured out how to reach my goal, but it's a mess. After I make my trims in QT, I have to:
1. select "share" instead of "export".
2. It asks me what size I want and I select small.
3. The file is then exported as a Quicktime movie into Mail and the size is reduced from 450 MB to about 20 MB.
4. I then have to "right-click" on the attachment in the email that is created,
5. save the attachment,
6. discard the email,
7. import the file into iTunes, and
8. create an MP3 in iTunes to finally arrive at my goal.
This seems like a ridiculously convoluted process to change a large aiff to a small MP3 and put it in iTunes. Any suggestions?

Thanks. I guess the basic answer to my question is that it can't be done in one or two fell swoops. The problem is that it starts on a burned disc, and I need to make edits to it before it ends up in iTunes (to be eventually used in iWeb). I was hoping to avoid juggling back and forth between iTunes and QT. I either would have to send it back to QT to do the edits after -->iTunes-->mp3, or import the large file from the CD to QT, make the edits, save changes, import large file to iTunes, convert to mp3.

BW Landscape Question - DEV and QAS in same Environment

Hi,
I do have a doubt about the following Landscape of my client:
ECC - PRD CLNT 100 --> BW Prod
ECC- DEV CLNT 400 --> BW Dev
ECC- DEV CLNT 100
Basically
ECC- DEV CLNT 400 has MasterData but NO customizing !!
ECC- DEV CLNT 100 has NO MasterData but Cusomtizing !
First I pointed the Source System to DEV CLNT 100 but as has no MData that though was no point on having such connection.
So created the landscape as above described.
The only draw back I can see is that every time I activate some BI_CONT in BWD it replicates it in DEV CLNT 400 for which the client is not open for customization so get the message "no authorization for..."
So the procedure is to activate the Datasources (in ECC) on CLNT 100 where is open for Custo and is automatically visible on CLNT 400.
Think the landscape described above is a proper one or can see any pitfall ?
thank you,
AM

Hi Alex
Regarding your question, there is no right or wrong approach, but one has to understand the purpose of the multiple clients on a system, plan accordingly and depending on the business requirements this drives the landscape.
On a development system, you can have multiple clients for various purposes and have the BW system linked to the relevant client:
- Customizing
- Testing (prefered BW Development connection to an ERP Development system)
- Play
In response to your question, it is a good approach to following and the only pitfall would be someone trying to do transactions in the customizing client and the BW system not been able to extract the data for testing purposes.
Currently I have my BW Development system pointing a ERP Development system which contains 3 clients:
- 1 Client (i.e. 200) for Customizing (customizing only, no transaction data).
- 1 Client (i.e. 220) for Play (copy from the ERP production system which contains master and transaction data).
- 1 Client (i.e. 230) for Testing (copy from the ERP production system which contains master and transaction data).
For the testing and play clients, we can also refresh the data if required, generally we try to do this ever 3 months or when there is a large project to be done, i.e. fiscal year change).
Of these 3 clients, my BW Development system only points to the ERP System's Testing client (client 230) so that the we can test extractions on master and transaction data. All developments done in the ERP Development system for BW is done in the customizing client (client 200), since most of the development work is client independent regarding the extractors, so it would then be automatically in the testing client. We have been using this approach for the last 5 years, with no major issues.
PS: The only issue you may have is regarding the extractors that use classification (transaction CTBW) as there is a client specific issue refer to OSS Note: 588184.
Regards
Derek

Basic database question, and subscribe/unsubscribe code

Hi there
Although I've created and manage a website, and about a million years ago I worked with databases, I'm still a bit green and in need of some help ...
I have the website based on my local machine (laptop). I want to use a subscribe/unsubscribe for a newsletter via the website.
Before I go ahead with this, I need to clarify a very basic database issue ... would I have to always leave my laptop running in order for people to be able to subscribe to the newsletter on the website, i.e. will it still connect to the database if the laptop is not running?
I'm using Dreamweaver 3, so I hope I can use this version to connect with a database? I did install Dreamweaver 4 on one occasion with the intent of upgrading the website to it, but because I'm still a bit unsure of myself and was unfamiliar with the changes the newer version created, I decided to leave it on Dreamweaver 3 rather than risk stuffing the website up completely!
I also have Dreamweaver UltraDev but for some reason it won't install.
I'm hoping to follow instructions given on Dreamweaver Developer Centre for setting up a PHP development environment (http://www.adobe.com/devnet/dreamweaver/articles/setting_up_php.html).
If anyone would be so kind as to advise whether I'm on the right track with all this, using Dreamweaver 3, that'd be great!
Also, I'm sure this is unlikely, but is there any way to include a subscribe-unsubscribe without having to actually use a database?
Many thanks in advance :-)
Cheers, Chrissie

Thanks for your help and advice - much appreciated. I'm going to go the way
of hosting, as you suggest, and save myself the heartache
Quoting jj12689 <[email protected]>:
To answer your first question, yes your laptop needs to be powered on
for users to be able to access the database and subscribe/unsubscribe.
There is another way of doing it, but it requires more work on your
part. You could make an online program that would generate SQL
statements and place them in a text document on the server. Every time a
user subscribes/unsubscribes it would add them to the end of the text
document. Then you could make an update button on a back-end admin page
that you would have to push that would take that text file, open it and
take the sql statements and submit it to the database on your computer.
I would advise against this method, since it is time consuming, and not
very fast for today's world. I would recomend using a server based
database, if the host you currently have dose not have a database, I
would recomend finding another host. I use surpasshosting.com for my
hosting because they are cheap, reliable, and have all the requirements
I need.
Â
Hope this helps...
>

Help about ESS/MSS - Deploy error and landscape question

Hi.
I read a lot of post about this topic, but I continue something confuse about them.
I want to configure ESS and MSS.
My landscape is:
- J2EE 7.0 with Portal 7.0 (2004s) in a server A.
- ECC 5.0 ( with HR component SP05) in a server B.
Server B, has only stack Abap.
Server A is the latest version of Netweaver today. (stack j2ee and stack abap, BI, XI, Portal, etc)
I download and deploy in server A (J2EE 7.0), this components:
- BP ESS for erp2004
- BP MSS for erp2004
When I deploy the ESS BP, the deployment break raising this kind of error with the most of components, for example:

===========================================================================
Deployment started Tue Apr 10 12:01:57 ART 2007
===========================================================================
Starting Deployment of ess/au/addr
Aborted: development component 'ess/au/addr'/'sap.com'/'MAIN_xss04PAT_C'/'1178669'/'0', grouped by software component 'SAP_ESS'/'sap.com'/'MAIN_xss04PAT_C'/'1000.100.0.15.1.20070309085432''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/essauaddr.. Reason: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of ess/au/addr finished with Error (Duration 5187 ms)
Starting Deployment of SAP_ESS
Aborted: software component 'SAP_ESS'/'sap.com'/'MAIN_xss04PAT_C'/'1000.100.0.15.1.20070309085432''/'0':
Failed deployment of SDAs:
development component 'ess/au/addr'/'sap.com'/'MAIN_xss04PAT_C'/'1178669'/'0' : aborted
Please, look at error logs above for more information!
Deployment of SAP_ESS finished with Error (Duration 4781 ms)

Obviously, for this reason the most of iviews raise errors. A few of these works ok.
I assign role, and others configuration steps, this part I thinks that is OK
I configured the Jco, the role in Portal, the profile in ERP for ESS, etc.
My principal question is:
Can I use Portal 7.0 against ECC 5.0 in order tu use ESS/MSS based on webdynpro, without stack j2ee in ECC server (B) ?
Is necesary install J2ee stack in my server B ? or not?
Where I need to deploy the XSS 500 components ? in the J2EE 7.0 ?
Why when I deploy have this problem and the most of components cant deploy it?
For my landscape, which is the recommended setup ?
thanks in advance.!
Leandro.

My principal question is:
Can I use Portal 7.0 against ECC 5.0 in order tu use ESS/MSS based on webdynpro, without stack j2ee in ECC server (B) ?
You can use Portal 7.0 against ECC 5.0
Is necesary install J2ee stack in my server B ? or not?
You don't need to install J2EE stack on ECC system
Where I need to deploy the XSS 500 components ? in the J2EE 7.0 ?
Deploy XSS on Portal server not on ECC.
Why when I deploy have this problem and the most of components cant deploy it?
There won't be any issue. Go for ERP 2005
For my landscape, which is the recommended setup ?
As per the landscape mentioned by you, I will suggest go for ERP 2005 & XSS 600.
If you have further queries, mail me at [email protected]

Basic Container question

Hi,
Here is a basic question that I would like to clear myself:
Does Weblogic server have one instance of Ejb Container where it runs all different
kind of Ejbs (Session, Entity)?
I'm not talking anything about clustered systems, just case of one physical Weblogic
server instance
in one physical server.
Br
Mikko

Hello Glenn,
I'm writing somekind of technical thesis of J2EE servers and
it should also cover this kind of issue too. I know that Sun's
specification tells about "Container" which handles deployment,
runtime environment, etc. issues so, developers doesn't need to
thing about it.
But as I said, I'm also interested in how Container(s)
is/are physically implemented e.g. are there only one
multithreded instance of a Container handling all different kind
of EJBs or as you mentioned, a container for each kind of EJB.
Br
Mikko
Glenn Dougherty <[email protected]> wrote:
Mikko,
Whether wls has one container for all beans or a container for each type,
the
'container' controls the deployment and access features according to
the spec. I'm not
sure why you need to know how it's implemented. Maybe you could mention
why you need
this information? If you do learn how it's implemented and then write
your application
in some way that utilizes it, you could be setting yourself up for failure
in the
future.
Glenn
Developer Relations Engineer
BEA Support
Mikko wrote:
Hi,
Here is a basic question that I would like to clear myself:
Does Weblogic server have one instance of Ejb Container where it runsall different
kind of Ejbs (Session, Entity)?
I'm not talking anything about clustered systems, just case of onephysical Weblogic
server instance
in one physical server.
Br
Mikko

Basic Ant Question

Any Ant experts out there? This is such a basic question and I'm surprised it's not attacked point-blank in the Ant docs. I must be missing something.
I'm trying to use ant to build a makefile that can be used on both Unix and Windows. Basically the only difference between the two environments will be the name of the company root directory (designated by the environment variable CAEROOT which is defined under both OS's).
How can I access that environment variable with ant??? The obvious attempt shown below doesn't work because I guess Ant thinks it's a property.
<code>
<project name="XMLDBBridge" default="compile" basedir=".">

<property name="src" value="src"/>
<property name="build" value="classes"/>
<property name="caeroot" value="${CAEROOT}/"/>
<target name="init">

<tstamp/>

<mkdir dir="${build}"/>
</target>
<target name="compile" depends="init">

<javac srcdir="${src}" destdir="${build}" classpath="${caeroot}/JLib/OracleJDBC/;
${caeroot}/JLib/OracleXDK/lib/xsu12.jar"/>
</target>
<target name="clean">

<delete dir="${build}"/>
</target>
</project>
</code>

In case anyone else ever has this same problem.
I finally figured out how to get environment variables working in ant. It's quite nice but doesn't really figure anywhere in the docs even though I feel its one of the key usages for ant.
<code>
<project name="XMLDBBridge" default="compile" basedir=".">

<property name="src" value="src"/>
<property name="build" value="classes"/>
<property environment="envvar"/>
<target name="init">

<tstamp/>

<mkdir dir="${build}"/>
</target>
<target name="compile" depends="init">

<javac srcdir="${src}" destdir="${build}" classpath="${envvar.CAEROOT}/JLib/OracleJDBC/;
${envvar.CAEROOT}/JLib/OracleXDK/lib/xsu12.jar"/>
</target>
<target name="clean">

<delete dir="${build}"/>
</target>
</project>
</code>

BOE/BW landscape question

HAd a question about managing/configuring BOE in a BW environment.
We are planning to have many non-production systems in our BW landscape. (Dev, Dev+1, Product test, Performance Test, Training..etc).
If we are also including BOE in our environment (Webi, Infoview, etc), do we need a corresponding BOE environment for each BW environment?
We currenrly make all BW changes in our develpment environment and transport thru the landscape to all other environments. Wondering how that works for BO objects , what systems need to be set up, and what is best practice for this and managing changes through the landscape.
Seems that a separate BOE environment for every non-prod BW implies additional cost (hardware and licensing) and we are trying to determine the best scenario.
But also want to maitain the control of versions and changes through the landscape and ability to test them as they progress through.
Thanks.

My recommendation is to have a 1-1 setup.
There are two kinds of connections between BO and SAP.
1) Authentication connections
2) Data connections.
Authentication connections allow your SAP users to use the credentials to log into the BO system. You can indeed create more than one authentication connections within a BOBJ system.
Data connections retrieve data from SAP sources into your BOBJ reports. A single report/dashboard (WebI,CR,XCelsius) can connect to several SAP data sources at once. But you cannot dynamically change the name of the system you are connecting to. At least not by applying generic BOBJ functionality.
SAP Business Objects offers the LifeCycle Manager to help you manage the life cycle of your projects in a multi-leveled environment.
Assuming you are using a single BOBJ installation for multiple SAP systems you have to make sure that the security is well defined in order to separate your development from your production environment. You will probably have to work with separate
folders to host your different environments. In this case you will not be able to use all capabilities of the LCM (like mapping of data connections).
Regards,
Stratos

Few basic SRM questions .......

I recently completed the SRM training from SAP and I have few basic questions and need help. Full points will be rewarded.
These are my questions and it is based on SRM 5.0 Classic Scenario with R/3 backend
1. Invoice & confirmation transferred to R/3 via ALE ? . All other documents are transferred to R/3 via RFC?
2. Based on the configuration, if the material is available in the backend then reservation will be created. Other wise PO will be created. For text items, PR will be created.
     a. Who (purchaser) will process the PR in R/3 and how it is processed?.
     b. Who (purchaser?) will process the reservation in R/3 and how it is
         processed?. Assume no sourcing is setup in this case and No MRP run.
3. How the vendor is linked to the Material or product category in SRM?. During the vendor replication from R/3, vendor and material/prod category link is automatically maintained?
4. How the vendor is linked to a specific purchasing org/group? Is it based on the prod category assigned in the org structure for each purchasing org or purchasing group?
5. How to do delta prod category replication?
6. How to do Delta Material Replication?.
7. Contracts and vendor list:-
    In our SAP training we created these from the browser. But in the actual
    implementation how do we create this?. Is it always from the browser?
8. Direct Material and Plan driven Procurement.
   Can we use catalog items as direct material?. Just for example - > What
   about Car Batteries that is directly used in production and has the inventory
   also. But we are using electronic catalog for procuring this item. Is it possible to
   order this as direct material?
9. How to replicate Plant. How to use DNL_PLNT?. Is BBP_LOCATIONS_GET_ALL will replicate all the PLANT's and its locations from the R/3 backend?
10. In the HR system, which transaction we can view the org structure?

Hi
Answers to your questions ->
1. http://help.sap.com/saphelp_srm50/helpdata/en/e9/d0fc3729b5db48e10000009b38f842/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/74/ec7b3c91c1eb1ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/55/d77c3c3fd53228e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/77/e97b3c91c1eb1ee10000000a114084/frameset.htm
2. Provided the necessary role is given to the Purchaser (Buyer) in the System.
a) Yes
b) Yes
3. http://help.sap.com/saphelp_srm50/helpdata/en/e5/f5e938b4ece075e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/70/00c73a584611d6b21700508b5d5211/frameset.htm
4. http://help.sap.com/saphelp_srm50/helpdata/en/2c/867d3ca2156c6ae10000000a114084/frameset.htm
The vendor ORG has to be seperately created through trasaction PPOCV_BBP before replicating the Vendors from the R/3 System.
http://help.sap.com/saphelp_srm50/helpdata/en/70/00c73a584611d6b21700508b5d5211/frameset.htm
5. http://help.sap.com/saphelp_srm50/helpdata/en/42/d3b671ba67136fe10000000a1553f7/frameset.htm
6. http://help.sap.com/saphelp_srm50/helpdata/en/29/d586398dcfd74fe10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/05/9b8139437eac2ae10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/f5/b4bcdac7c40c4dba53e3695d18236c/frameset.htm
7. Yes, from Browser it's quite easy and is quite user-friendly.
8.
http://help.sap.com/saphelp_srm50/helpdata/en/d3/4b9c3b122efc6ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
9.
You can use the following three routines to download locations from the backend system and store them as business partners in SAP Enterprise Buyer.
BBP_LOCATIONS_GET_ALL
To get all the location numbers from each backend system that is connected
BBP_LOCATIONS_GET_FROM_SYSTEM
To get all the location numbers from one particular backend system
BBP_LOCATIONS_GET_SELECTED
To get selected locations
Previously, locations were not given business partner numbers in SAP Enterprise Buyer. If you are configuring an upgrade, you can use routines BBP_LOCATIONS_GET_FROM_SYSTEM and BBP_LOCATIONS_GET_SELECTED to check that the following conversions have been made:
·        Conversion of user favorites
·        Conversion of user attributes
·        Conversion of old documents
Routine BBP_LOCATIONS_GET_ALL checks these automatically.
Once you have run the routines, the location data is available in the SAP Enterprise Buyer system. Table BBP_LOCMAP contains the mapping information (in other words, which business partner number corresponds to which location in which backend system).
For more information, see SAP Note 563180 Locations for EBP 4.0 plant replication
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/77/e97b3c91c1eb1ee10000000a114084/frameset.htm
10. PPOCA_BBP(Create) / PPOMA_BBP(Change) / PPOSA_BBP(Display).
Regards
- Atul

Basic swing question

I just started looking at swing yesterday because I want to provide a GUI to replace a command line utility we use. I've basically finished it but have a quick question about form - I will get some literature later but would like to get a feel from the people here. If you have a JFrame with a few JPanels each which contain some other components, what is the best practice for variable declaration? Should I just declare the variables locally or should I make them instance variables? The reason I ask is that I have a button that submits a message but that message is dependant on check boxes, etc. from from the frame. If I declare them at the method level I then have to start passing them around whereas if I declare them as instance variables I can access them very easily BUT this may not be good form.
For example:
my class is SendMessageToo so in the main method I have a line like:
final SendMessageToo smt = new SendMessageToo();
now all the instance variables that I have can be accessed my the methods simply using smt.methodOne(), etc. Does that seem OK or is it just pure crap? :-)

Thanks, that was something that crossed my mind before I just made eveything an instance variable. It was during that process that I thought, do these all need to be instance variables? Then I thought, SHOULD they all be instance variables. At that point my brain imploded so I came here. :)

Basic landscape question in 2004s environment

Similar Messages

Maybe you are looking for