Basic LOC is not working in B2C shop where as area level LOC is working.

Hello Experts,
We are on CRM 2007 (6.0) B2C Implementation. The Requirement is to have a search on certain attributes which were maintained in basic list of characteristics in product catalog header level. The same attributes are appearing at item level where as it is not allowing us to maintain values for these attributes.
We could able to maintain values for area level loc attributes and LOC at catalog area level is also working fine in the web shop .
Could you throw some light on this.
Regards,
Vasu.

Hello Vasu,
Since no products can be maintained at header level basic list of characteristics cannot work. if you maintain products at any subarea level you can have area level LOC.
Regards,
Jeevan

Similar Messages

I am running Win 7 Pro and the javascript to give popup pictures on my website is not resolving correctly. Pop up frames are too large. Worked O.K. on 3.6

Small images are on the website pages. A click on the small images gives a larger picture which pops up in a frame. Small images are around 320 x 200. Pop up images are around 880 x 660. This procedure is controlled by javascript coding within the page for each pop up. If the images are larger than your screen size, scrollbars are provided.
Javascript routine -
<script language="JavaScript" type="text/javascript">

</script>
Routine called with -
<a title=" Auld Brig in the Summer Foliage" href="javascript: popitup('images/auldbrigsum2-2.jpg','Auld Brig and Summer Foliage',865,650,'white')">

Small images are on the website pages. A click on the small images gives a larger picture which pops up in a frame. Small images are around 320 x 200. Pop up images are around 880 x 660. This procedure is controlled by javascript coding within the page for each pop up. If the images are larger than your screen size, scrollbars are provided.
Javascript routine -
<script language="JavaScript" type="text/javascript">

</script>
Routine called with -
<a title=" Auld Brig in the Summer Foliage" href="javascript: popitup('images/auldbrigsum2-2.jpg','Auld Brig and Summer Foliage',865,650,'white')">

Your wireless provider does not have a roaming agreement in this area?

everytime i try to make a call i get a message "your wireless provider does not have a roaming agreement in the area. message 6". i work out of chariton,ia my coworkers have verizon and have no problem. also data doesnt work anymore.

Hi samoanmutt!
Thanks for the additional information! Upon further review of the area, I show zip code 50049 listed as a "Extended Digital Coverage" area:http://vz.to/1mRpOe3. Unfortunately, that means no VZW towers are present in the area.
Thanks
AyaniB_VZW
Follow us on Twitter @VZWSupport

Firefox is not going online while my other browsers are

for the past 4 days, when i click on the firefox icon it automatically installs an update that i cannot stop. then the window opens and it does not go online, while my other browsers are.

Do you have "Work Offline" checkmarked in the File menu? If so, click it to remove the checkmark.
If not, please do the following.
Click '''Help''', then '''Restart With Add-ons disabled'''.
Next, click the button called "'''Continue without making changes'''". Firefox will subsequently restart in Safe Mode which means all your add-ons will be disabled.
Then go to '''Help '''| '''About Firefox '''and click the '''Check For Updates''' button to download version 4.0.1

HT2693 I bought an itunes gift card but when i try to redeem my account it says invalid code. I put in the code perfectly but its still not working. The shop wont take it back either, What should i do?

I need help, i bought an itunes gift card but when i try to redeem my account it says invalid code. I even checked the code and i had it 100% right but its still not working. The shop in which i bought it wont take it back so i dont know what to do. Please help.

iTunes Store: Invalid, inactive, or illegible codes

Apache bridge & Basic Auth does not work

The WebLogic newsgroups are not the appropriate place to file product defect
reports.
I suggest that you file a bug report with our support organization. Be sure
to include a complete test case. They will also need information from
you -- please review our external support procedures:
http://www.beasys.com/support/index.html
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Jaroslav Mechacek <[email protected]> wrote in message
news:[email protected]..
>
I tried mod_wl with apache 1.3.12 ( mod_ssl / openssl ) ,
but the basic auth does not work.
When apache starts it complains that mod_lw uses plain apache api
Tue May 16 17:29:54 2000] [warn] Loaded DSO libexec/mod_wl.so uses plain
Apache 1.3 API, this module might crash under EAPI! (please recompile it
with -DEAPI)
When I request protected page, apache returns both
HTTP/1.1 200 OK , HTTP/1.1 401 Unauthorized
what apache / ssl configurations are known to work ?
Escape character is '^]'.
GET /file/index.html HTTP1.0
HTTP/1.1 200 OK
Date: Tue, 16 May 2000 14:47:01 GMT
Server: Apache/1.3.12 (Unix) mod_ssl/2.6.4 OpenSSL/0.9.5a
HTTP/1.1 401 Unauthorized xxx:
www-authenticate: Basic realm="WebLogic Server"
content-length: 23
content-type: text/html
connection: Close
No credentials supplied

HT201269 I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can

I am trying to remove the backup encrypt for my Iphone 4 but the itunes ask for the password and basically I have not set any password before ...!!! Please note that I entered the password for my apple account and also it did not work, how i can reset it?

You can't reset it. If you don't konw the password then you can't use that backup

I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it. I've tried restoring it and restarting it but nothing seems to work.

I just restored my ipod and the power button works, as well as the home button but when I slide the unlock button it doesn't respond. Basically it is not sensing that I am touching it and I can not get out of the home screen. I've tried restoring it and restarting it but nothing seems to work. I've tried everything, is there anything I can do myself to fix it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Basic Motion Tween not working?

I created a graphic symbol in Illustrator and copied-and-pasted it into Flash. I placed a keyframe further in the Timeline and scaled the symbol down on that frame. I went back to the first frame and right clicked on it and chose to create motion tween, though nothing visually happened between the first frame and last one like it did in previous versions, and the the symbol did not not animate. What did I do wrong?
Thanks.

Adobe has made it a wild goose chase. For me, it only works if I don't have a second keyframe. Baffling, why should it behave so differently than classic tweening?!
People like me have been hitting their heads against the wall for years trying to get this to work. Absolutely asinine.
For the record and to repeat my huge gripe, it behaves nothing like classic tweening, where you define an end point and then "tween" between them. You can end up doing that, but you can't create the tween between two existing keyframes (even if they have the exact same single object in them).
So this is what's working for me now:
1 - Create a timeline layer with one single object in an initial keyframe (black dot indicates a keyframe). No more than one object can be tweened in one layer, but Adobe will not give you any userful feedback about this while you're working.
2 - On that layer, farther out in the timeline where there are no frames (what is the name for these "non-frames"?), right click where you want the tween to end, and select "Insert frame". (You'll have a black dot keyframe, a row of grey empty frames, and white box as a blank keyframe.
3 - Right click anywhere on the active part of that timeline and choose "Create Motion Tween", even though there is nothing to tween yet. After you do this, the span of frames should turn blue and the blank keyframe white box should disappear. Congratulations, you've created your first motion tween, but Adobe doesn't want you to know that. You need to actually go to individual frames and move the object around to get tweening to happen, as I outline in steps 4 and 5. Assuming your object is where you want it in the starting position, I would recommend going to the last frame to determine the final position next. Then you can do any number of middle positions (each frame can have a new position).
4 - (optional step, helps with positioning on the timeline) Scrub the timeline and find a frame where you want the trajectory of your object to change (at the very minimum, you'll want to move the object for one frame, otherwise there will be no motion)
5 - Move the object on the stage.
6 - Repeat 4 and 5 for as many frames as you want.
If you're not seeing motion paths that chart the motion, play with the little buttons on the bottom of the timeline, such as Onion Skinning. Lastly, just move the playhead left and right. If you're not seeing your object move, then blame Adobe some more, because this is far from immediately intuitive.

Work flow not created for the Shopping Cart

Hi one of the customers created a shopping cart,in approval overview it is showing as no need of approvals,but the status of approval is 'awaiting approval', but workflow is not created for the Shopping cart. advised to re-order in change mode but still no use. please advise.

Hi,
what do you see in SLG1? Check the below t.codes
SM58 - check for stuck remote function calls
ST22 - check for system dumps
SM13 - check for stuck update requests
SM21 - check in the system log for anything unusual
SWUD - run a consistency check on the workflow
Saravanan

Pricing Totals not appearing in B2C web shop

Hello All,
We are using list prices in product catalog and in B2C web shop.
We are unable to see the pricing totals in the save order screen.The pricing totals and prices are appearing in in the back end(SAP GUI).
Could any one suggest where do we have to make the necessary settings?
Thanks in advance,
Sastri

Dear Yanamandra,
If you are using list price your gross total also will be the same as list price.
And for this you have to switch off the IPC in XCM settings and have to replicate the catalog properly in TREX server.
Otherwise if you are using a customer pricing procedure to calculate the prices and there are other additional prices which have to be added to the list price at the time of pricing.
Then you should activate the IPC and also your VMC should be active in the CRM s/m, and also if you are using any customized user exit that also should be implemented.
hope this clarifies your doubt.
Thanks and Regards
shanto aloor

IPhone 4s WiFi not turning on, repair shop says they won't fix it (they've done it 4 times now), bought the iPhone second hand and the apple website says the serial is invalid.. What do I do?

First off, I've a 16gb unlocked white iPhone 4s. The discussion title kind of explains the entire situation. I can't get on to apple to get it repaired, because it says the serial code is a replacement and invalid - I bought the phone from DoneDeal.ie (an Irish Craigslist/eBay basically) and the guy I bought it from gave me the box with everything in it, phone, phone charger, warranty, apple care, everything. But then I looked closer and realised the apple care document was faked, and the warranty was also fake. I checked online with my IMEI code and the website said the warranty was well up, and that the phone was a replacement.
I was told the phone was brand new and that it was literally just out of the box but obviously that was a lie.. Anyway, approximately 3/4 months later, the WiFi broke - When I went in to to turn the wifi on in the settings menu, the wifi was greyed out and didn't have an option to be turned on. I've since got the wifi repaired for the 5th time as it constantly goes back to the greyed out option every month or so. The repair shop (not sure if it was apple official or anything, if I had to guess, I'd say it wasn't) said they could either give us back our money or repair it one last time but it's gone again and that's kinda the last straw, they said it was a generic problem they'd found on all iPhone 4s's and that basically, I'd just have to deal with it as apple are not very helpful with replacing these phones but obviously I'd like to give them a chance to prove that wrong though.
Anyway, seeing as I can't contact apple through the customer support section, any chance someone from apple can give me some feedback as to what my options are on this discussion?
I don't even need a replacement phone (although that would be ideal) but I definitetly need a repair that's going to work for more than a month..
Thanks to anyone who can help, but especially to anyone from apple!

If the repair shop was not apple certified repair shop then Apple will not replace/ or touch that device with a ten foot pole sadly. I'd follow Rudegar's advise and try anthoer repair shop as sadly it sounds like you got jipped by the original owner. Always verify your infomation through the company before you hand over the money!

Discounts types in B2C shop

Hello Experts
I am working on CRM 7.0
I have maintained discounts for materials in the backend system (ECC).
They have been downloaded to CRM. When creating Order in B2C shop, I am not able to see the Discount condition type
in the B2C shop. The discounts are getting calculated and added to the total, but not visible.
Is this the standard behaviour in the B2C shop. Or I am missing something here. If I need to display the discounts in the webshop what needs to be done.
Awaiting for your valuable suggestions.
Thanks
Sastri

Standard behavior.
Displaying any additional condition type is a custom effort.

BBP_DOCUMENT_TAB does not get populated with shopping cart

Hello Gurus,
We are facing some weird issue out of blue. We have SRM 5.0 Classic scenario with ECC 6.0 backend system. We have everything configured and it was working i mean shopping carts were successfully transferring into ECC system as PR.
Suddnely now we are getting error Item in transfer process for all the shopping carts. While checking into RZ20 monitor it shows following error " Backend application errors: Shopping cart (PReq. 7000027359): W5 002 No items exist (not possible to save)".
When we put debug in CLEAN_REQREQ_UP we found out that table BBP_DOCUMENT_TAB which should get populated whenever shopping cart is approved it not getting any data.
Could you please let us know what could be the reason? As all the user IDs with which RFC's are maintained at SRM and ECC level active and all proper authorization are there.
Please advise.
Thanks
Ritesh

Hello Ritesh,
Actually, the document tab is updated by the SC transfer (SC spooler). Each time the system starts the shopping cart transfer, an entry is created in BBP_DOCUMENT_TAB until the CLEAN_REQREQ_UP is executed.
You could debug the shopping cart transfer and check if the follow-on document is being created.
Also, you could check the SPRO customizing -> SRM SERVER -> Techcnical Basic Settings -> Set Control Parameters, and check its value.
As additional information, you can check the note 1173815, which provides some information regarding the follow-on document creation (customizing tables).
I hope it helps.
Kind regards,
Ricardo

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Basic LOC is not working in B2C shop where as area level LOC is working.

Similar Messages

Maybe you are looking for