Basic or Full Version

On page http://www.adobe.com/products/acrobat/messaging/search.html it says:
"When you download Adobe Reader 6.0 from the Adobe Web site, you can choose the basic version or the full version. For the most robust search capabilities, download the full version."
How do I know whether the Basic version or the Full version is installed (on my company intranet)?

I don't know for sure, but try this:
Help > About Adobe Plug-ins
Look down the list for "Search". I'd expect this to be in the full one
only.
The distinction no longer exists in recent versions I think.
Aandi Inston

Similar Messages

How much effort for object migration from CPS Basic to Full version?

Dear all,
I've got 2 questions concerning using SAP CPS Basic version first and migrating later to full version, looking for answer(s):
1. Is it possible to start using the free CPS and then with some tool migrate from many isolation group as to one global ?
2. Is there any limitation in the number of isolation groups in the free version ?
If someone have experience, would be great to get feedback.
Look forward reading from you.
Best Regards
Ferry

Hello,
1) the product comes with a job to 'De-Isolate' the system when you install a full license. Note that you can only deisolate, it is not possible to go back from full to free.
2) there is no limitation.
Regards Gerben

Activate Microsoft Lync 2013 basic to full version.

Hi,
In our customer environment around 5000 machines have been installed with LYNC 2013 Basic, however We have the licensed LYNC 2013 full version need to replace LYNC 2013 basic version What is the best way to achieve this.
Thanks in Advance.
Regards,
Madhan

Hi Tanders,
This is what you need to do:
1. Take that download and run lyncentry.exe /extract (when prompted, drop the files into a new folder)
2. Inside of the lyncentry.ww it creates, edit a file called "config.xml"
3. Change the "Display Level" Line to: <Display Level="None" CompletionNotice="No" SuppressModal="no" AcceptEula="Yes" />
4. Make sure to remove the  at the begiinning and end of the line.
5. Then, you are going to publish the setup.exe in the top level folder. You must upload the entire folder and its sub folders to Intune (there is a checkbox to upload all the subfolders as well)
6. When prompted to provide command line options, use: /config lyncentry.ww\config.xml
That should be it. It will completely unattended and silently.
Hope that helps.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Redwood: Migration from Basic to Full version

Hi All,
Our client is now going ahead with OEM version of REDWOOD and will plan for full blown version in future. In this regard, we wanted to know the possibility of migrating all the existing stuff (like all the created scripts, job chains, time windows etc.). Request your inputs in this regard.
Thanks and Regards,
Vithalprasad

Best way to do it is use oracle export, import.

Does the basic photographic package (photoshop & lightroom) include the full version tutorial tab?

Does the basic photographic package (photoshop & lightroom) include the full version tutorial tab?

Just curious, what is the full version tutorial tab?

Ozone 3 Demo great, bought the full version and now it won't work

Bought Ozone 3 for mastering because I downloaded a trial version that was great. Installed the full version and now it won't show up in my garageband effects windows? Any help would be greatly appreciated. It shows up in pro-tools but not garageband? Any ideas or advice?
Thanks in advance.

I was able to get some help with the situation by going to the thread at:
https://discussions.apple.com/thread/4091321?tstart=0
I followed the basic idea of the guy who said OH! I've got it! or something like that. He listed several things to do to uninstall all apple programs then finally amds (which did uninstall but it still displayed in the Programs page) as well as to download the newest version of iTunes, save it to the desktop and run it by right-clicking and installing as admin. It worked. Thanks for offering to help with the situation.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

Queries related to Redwood Installation / Upgrade to Full version

Hi All,
We Need some help.
We have couple of question related to redwood installation, kindly help us.
We have SAP Central Process for Scheduling (Redwood 6.0.2.7) basic version installed on our Unix server.
We are now planning to migrate to the SAP CPS full version and have already procured the license. SAP added the installables at the marketplace under - Installation and upgrades - My Application components - SAP Partner products - SAP CPS Scheduler (Full) after the procurement. We have downloaded the installables now.
My questions are:
1. How do we now upgrade the Redwood OEM version to full version? Because, we had mailed to SAP with the OEM license to change it to full version, but then SAP replied to us asking us to send them the full version license. How do I get that? Does this file (register.txt) gets created once we start the installation of Redwood full version? Because we had assumed that by buying the full version license, we would just need to send the OEM license and it would be changed to a full version, but its not so. How do we go about from here. Do we do a new installation and uninstall the basic version?
2. Also, if we are to do a new installation, how do we get the register.txt file which we need to send to SAP for key generation?
We are very new to Redwood. Any pointers would be highly appreciated.
Awaiting your response.
Thanks in advance.
Warm Regards
Rajeet

SCS stands for central services of SAP NetWeaver AS Java instance, with enqueue and message service.The Central Services run on one physical machine and constitute a Java instance.
You could get a better response on an appropriate forum,I think.
You have got quite a lot of threads open .Pls close them if u r fine with replies u have recieved .It would also be nice if you could go through this
Must read</b>
Rgrds
Vineeth

Move from trial to full version of Aperture 3

I have been using the trial version of Aperture 3 for a week now, and I am really impressed with it. I would like to buy the App version from the App Store. What is the best way of doing this? Do I have to remove the trial version and then purchase and install the App version, or do I just purchase and install the App version and it will overwrite the trial version? I have read a few threads where someone went from the trial to the full version and because of the way then did it, it could not accept updates because it was still being seen as a trial version. I am still new to Apple and not comfortable with the way Macs handle software installation and removal. Any help will be appreciated.

We're in a kind of limbo with Aperture right now because of the transition to the Mac App Store. Logically that BUY link should take you to the MAS and let you buy from there without having anything else to do. But I don't know if they've changed it to do that — you'll have to try and see for yourself.
What may happen is that it'll work like it did before and you'll instead get taken to the Apple Store and be offered the $199 full version or $99 upgrade. Which is a little odd and — I have to agree with you — very un-Apple.
Basically there are two versions of Aperture 3 floating around: the $79 MAS version and the $199 Apple Store version. Both are identical in function but the $199 version still works with a serial number. You also get a DVD but frankly I haven't used an Aperture DVD since version 1.5 (I've been downloading the trial and purchasing a serial number upgrade since then).
Confusing? Yeah, it is.
But unless you want to pay more for the same thing, I'd go with the $79 MAS version. You might not even have to delete the trial but it's just a precaution in light of certain stories on this forum. Deleting the trial application won't affect anything you've done with Aperture 3 until now so don't worry, it's really not a big deal.
Best

Want to load WindowXP on Mac. Need clarification between OEM & full version

First I am totally new and green. Have had MacBook for 6 mos.- Have learned a lot but can't figure this one. I want to load Windows XP. I have installed Leopard, had the drive partitioned but now need to know which XP I need. I have already purchased an OEM version and was told it would not work. I returned to seller. Now I am not sure of the difference between 1) licensed copy, 2)full version 3)OEM version. What do I need to buy??
Carolyn525

Most any OEM XP SP2 should work unless it is 'vendor specific' to a particular machine (Dell, etc). The seller should know, most buy from places like Newegg, Amazon etc.
I use Vista System Builder, which is basically your OEM, you don't get Microsoft support and have to provide your own if you run into trouble and have questions is all.
If new to Windows, you may want to need to know to configure, choose which security software you want to use, etc. I settled on Kaspersky Internet Suite after trying a couple others (AVG, Norton 2007/2008).

Crystal Reports full version 64 bit native by when?

Hi,
I am wondering if crystal report recent full versions (not basic with VS) native 64 bit will be released in the near future?
Thank you in advance for your answers.

Hello,
We can't say for sure, just that we are working on it.
Watch the Home page for more info....
Thank you
Don

Muse Demo vs Full Version Question

Demo version working well, but seems to be missing a lot of basic tools. Does the full version come with more site building options I assume?
Are there any websites out there you can direct me to that was built by Muse?
I would like to buy Muse's full version but just checking first... thank you!

Thank you for responding Mac!
Bullets, borders, more widgets, background pic's, templates, etc. (The demo comes with one sample template... "Katies Cookies" or something.)
Those sites look beautiful... and all created on Muse? I CAN create sites with those cool graphics using the demo version??
If so I'll look at more tutorials.

After redeeming the full version of CC through my University,I dont appear to have it.

Hi everyone,
so basically my University allows students like myself to download the full version of Creative Cloud for free. I went through all the steps and recieved a confirmation email with a redemption code. I then used this code to redeem CC and thought i would be able to download and install programs such as Photoshop, Indesign etc. But i checked my adobe account and apparently i only have access to trial versions of the software. I even tried redeeming again but it said that the code had already been used.
Hope ive explained myself well enough.
Any help appreciated.
Thanks

Hi basketball_21
Could you please check that you're using the same Adobe ID you used to redeem the membership. I can see a membership under a slightly different email address - edyu instead of edu?
Thanks
Bev

Full version vs OEM ?

I am about to buy windows vista home premium i cant decide on which to get though the Full Version priced at $195 or the OEM priced at $95.
Questions
1.my real question is what are the differences between these too?
2.I heard OEM can only be used to install once, so will it be possible for me to reinstall the OEM if i need or want to one the same computer?
3.With the OEM version can i run Windows with Bootcamp and then run the same version in Parallels?
4.Basically can I use the OEM more than once on the same computer?

Another difference between the retail an OEM versions I believe, is that the OEM version contains either a 32bit version or a 64bit version but not both.
The retail version has both allowing you to later change your mind and reinstall the other option.
The main issue I would worry about is that if you think you are going to regularly upgrade your computer, then the OEM version would have to be replaced each time (it is tied to a single logic board - the one you first install on), whereas the retail version can be uninstalled and moved to a new machine (the license allows you to do this). If you might only change once then the much cheaper price of the OEM version means you could afford to buy two copies, if you might change three times, then it might become cheaper to have the retail version.
Hardcore gamers, who constantly rebuild their custom machines would probably benefit from getting the retail version.

Help? PSE 9 - was a full version, now the serial on my adobe account is registered as "Beta"?

Hi,
I have a bit of a frustrating situation - I received a full copy of Photoshop Elements 9 (for Mac) with a printer 2 years ago, installed it and used it on and off without problem for a year or so. Brilliant.
Earlier this year, running out of disk space, I had a clean-up of my machine to free up some space and as part of that I uninstalled PSE9.
I now need to reinstall PSE9, but I've lost the serial number (was printed on a slip of paper with the software bundled with the printer). So, first attempt was to recover the installed app from the Mac "Time Machine" backup from before my cleanup. I was able to recover the PSE folder/app, but it wouldn't launch - I'm guessing there are some other system files I need or something (I'm primarily a PC user, and I suspect there are "Program Files" equivalents to consider)...
Anyway, with that not working, I tried reinstalling from the CD (hoping there may be a "repair installation" option of some kind - but there wasnt). So I went through the regsitration, through the adobe id login & halted once more at the serial key screen.
After several attempts to recover from backup, uninstall, install, reinstall, (throw mac out of window....!!!) I eventually logged into adobe.com, and found to my delight that my serial number for PSE9 was accessible in my account - excellent! So I joyfully entered that into the installation screen and .... NO!! "error: serial number is not valid for this product".
Frustrated at this point I contacted Adobe chat help, who (cutting another long 45 minute story short) advised that the serial number in my account was for a "beta" version of PSE9. ...even though the disc and original serial (decomposing in landfill somewhere now...!) I have is for a full version. I have used it as I said and it is definitely not "beta" or a trial!!!!
I noticed also that my account registration date was showing as 2nd November 2012 (i.e. that same day), despite me having originally registered with my original product installation almost 2 years prior on 12/12/2010 (I have the welcome "Your Adobe Membership" email in my GMail still).
So with hindsight now, I'm wondering if by trying to reinstall PSE yesterday and logging in with my adobe id, my account and/or my serial number from 2010 has been overwritten with a new account(?) and "temporary" serial number? That's all I can think of, and now I have no way of recovering my serial number! (bundled with the printer, the serial number came on a printed piece of paper, which 2 years on, I've lost)
This is quite a specific sequence of events, I realise, but has anybody else experienced this, and if so, is there any way I can recover my original serial number (without of course paying for another licence? Or putting my wellies on & digging through the local refuse tip!!).
Thanks to anyone who has read to here, and thanks in advance to anyone who can offer any advice!
Thanks,
Aaron.

Hi,
Just an update - I'm now attempting to do a full system restore from the time machine back to before I ununstalled PSE9.
Wish me luck....!
(meanwhile, downloading Gimp 2.8 on my PC to see if I can do what I need with that in the meantime!!)
Thanks,
Aaron.

Basic or Full Version

Similar Messages

Maybe you are looking for