Basic Order View - Define View Profiles

In ECC 6.0, we have an option to customize the work order screen as per the busiess needs in the configuration path:
Plant Maintenance and CS -> Maintenance and Service Processing -> Functions and Settings for Order Types -> Basic Order View -> Define View Profiles
Question -> Is there a view profile defined by SAP for standard SAP work order screen?
We have a requirement to modify the standard SAP work order screen where we have to add additional tabs. Since there is no profile defined for standard SAP work order screen, we have to build from the scratch which takes a lot of time.
Any suggestions?
Thanks

Thanks SN. Yes, I am aware of the user exit and also that we can configure the screens of work order in ECC 6.0 using SPRO but the only problem is that we have to build it from scratch. My question was to know if SAP had standard screen templates or profiles like they have for Notiification. Anyways thanks for your response, I got the below response from SAP for my question.
I've checked if its possible to customize the screen selections
like it can be done for notifications and unfortunately it isnt
possible in the standard system
The only customizing that can be done for order can be found using the
following path:
SPRO>>>IMG>>>PLANT MAINTENANCE & CUSTOMER SERVICE>>>MAINTENANCE &
SERVICE PROCESSING>>>MAINTENANCE & SERVICE ORDERS
You will find the following options:
DEFINE FIELD SELECTION FOR ORDER HEADER(PM)
DEFINE FIELD SELECTION FOR ORDER HEADER(CS)
DEFINE FIELD SELECTION FOR ORDER OPERATION(PM & CS)
DEFINE FIELD SELECTION FOR ORDER COMPONENT(PM & CS)

Similar Messages

PM Basic Order View

Attempting to configure a basic order view for order type F1
I have configured the basic view profile with the following to see if it will work:
View profile: Fleet
Tabs
Tab Page 10
Tab Active "checked"
TabPageTitle Fleet Order
TabPageSymbol Blank
S 1 005
S 2 001
S 3 002
Navigation
Pushbutton Header Data
Tab Page 10
I have also assigned this to the F1 order type for all activities.
When I go to create an F1 order my view does not change.
What could I be missing?

Hi,
You need to be really careful when you are turning on enhancement packs on SAP, once this functionality is working is not possible to return back. This application may have impacts in other areas
Please review the information below:
http://help.sap.com/erp2005_ehp_02/helpdata/EN/46/4AD530501C0DB6E10000000A1553F6/frameset.htm
Regards
Carlos Gonzalez

Basic order view IMG activities in ECC6.0

Hi guys,
In our ECC6.0 system the IMG activities for customizing the tab pages in the PM order are missing. In the releasenote for ECC 6.0 it says I should expect it under Maintenance and Service Orders -> Functions and Settings for Order Types -> Basic Order View.
Any of you have the same problem? How did you get to the IMG activities?
Thanks in advance!

Hi Harvey,
To enable the PM order screen layout in IMG, the extension set EA-SCM-IMG (Enterprise SCM switch for IMG) activation is enough or any other components are needs to be configured. (Component EA-APPL is already installed).
Is there any implications by activating this extension set? where should i get the documentation to know the affects by activating any extension set.

Basic Order View.

Hi,
I am configuring BASIC ORDER VIEW, I have two queries
1) Why am I not able to view this pushbutton any where on the initial screen?
2)I want to view the costs in this configured view without switching it to the old GUI.
Thanks in advance.

hi
can you clearly specify the requirement , i am not able to understand your query
regards
thyagarajan

Basic Order View - Plant Maintenance

Looking for any advice, tips, tricks, things to look out for in using screen blocks, to structure the tabs on work order configuration, similar to notification configuration. I believe that this functionality came in with enhancement pack 3 in ECC6.0.

Dear,
For creting a Order view as per ur requierment, first u need to create a view profile in the customozing
When defining the tab pages, you must note the following:
The key of the tab page serves as the sort key for the sequence in which the tab pages are displayed.
You can assign a maximum of eight screen areas to a tab page. The sequence in which the screen areas are assigned also determines the sequence in which they are displayed on the tab page.
There are screen areas that take up a whole tag page (fullscreen). You must always enter these screen areas in the field for the screen area 1.
For all the pushbuttons for the navigation, that are offered on the initial screen of the order, you must define which tab page is displayed when you select the pushbutton.
If you do not define an active tab page for a pushbutton, the system uses the first tab page.
Now assign the created profile to the order type, planning plant and the activity category.
If you leave the activity category empty, then the assigned view profile applies to all the activity categories.
If you also define an activity category (for example, add), then the assigned view profile only applies to this activity category.
regards
sunil

KDE Device Notifier command for specific Konqueror View Profile?

Hi,
I added a custom action in KDE device notifier widget for optical devices to be opened with Konqueror. However, is it possible to modify that command so that Konqueror opens with a specific view profile?
Many thanks in advance.

Thanks a bunch!
However, one tiny problem still persists: When I execute konqueror --profile <profile_name> %f, a Konqueror window split into four opens, one showing the optical device but the other three are void. My view profile indeed splits the window into 4 sub-windows, but what I'm trying to do is basically view the optical device in one sub-window while the others show two certain websites and one samba shared folder.
I know it sounds weird, but is it at least possible?

Maximum lines set on Sales Order view

Hi All,
This is happening with all sales orders with more than 8 items, where the rest of the items are not seen in the sale order after creation and save. For example 15 different type of material were sold to customer, the billing document view (VF03) showed all 15 line items, the delivery line items showed all 15 lines, but the sales order only showed the first 8 line items. The other last 7 items were not to be seen anywhere on the sales order.
Is there a maximum view limit on sales orders? Anyone else has had a similar case?
Thanks
Sandip

Hi Balaji,
I tried to access SE51 but I have no authorization, and even though I maintain user accounts at my company I could not find more details in regards to this Tcode.
I even tried to find some role associated with it but was unsuccessful.
Hi Chandrasekhar,
For the information in VOV8, the Display Range had 'UALL' in the field.
And wierdly, when I clicked on the Item Overview, all items (15 different types) are shown, but when going back into the Sales Order View for the same order, only the first 8 are shown.
The main problem here is that when doing a ZRE sales order, as we cannot do 'post goods receipt' for the 9th+n item.
I appreciate the help.

How to use column with linkToItem in the Basic Table view style mode

Hi
I have already changed a normal column that I made to a column with linkToItem as follows.
<viewfields>
<FieldRef Name="MyColumn" linkToItem="TRUE">
and it worked.
But this column works only at the default view style mode in my case.
Does anyone know how to use linkedToItem column in the Basic Table mode?
hope someone help me.
thanks

Hi,
According to your description, my understanding is that you want to use linkToItem in the Basic Table view style.
Per my test, in the Default style view, we need to use linkToItem=”TRUE”. However, in Basic Table style view, we need to use LinkToItem=”TRUE” instead.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Merging Basic data View and Classification View in Material Master

Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar Baddela

Hi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT

Is there anyway to create a basic Image Viewer in CS5?

Hello,
Im looking for a really basic Image Viewer - exactly like the one you could create using DW CS3 but od corse it was discontinued. Is there any other way I can create something similar using CS5? or if not can anyone recomend a bsic one on - line without all the thumb Nails and fancy stuff.
Here is a perfect example of what I am looking for.
www.broadsoft.com.au/janielle/test5
Thanks

Log-in to the Adobe Widget Exchange with your Widget Browser.
There are a some jQuery and Ajax powered image viewers & slideshows you can grab for your site.
jQuery Cycle Widget
Lightbox Gallery Widget
Spry Content Slides
Spry Image Slideshow
I don't recommend using a Flash viewer because it's not supported by all web devices.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Set View Profiles.equipment

Hi SDN,
When I addded one Sub Subscreens (No.: 110 ) in general tab, it not impact my equipment master data. why?
for this should i missed some configuration?
KB
Edited by: Umapathy.B on Apr 19, 2008 9:15 AM

Hi,
You will have to assign the view profiles to equipment categories.
Goto SPRO>PM&CS>Master data in PM & CS>Technical Objects>Equipment categories-->Maintain Equipment category and Execute ,Then Assign the profile Standard to the Equipment Categories.
After doing these settings, when u create equipment with that category then it displays the sub screen.
I hope this helps you.
Reward with points if useful...

View profile different?

Two questions. First, when I click "view profile" of an account (say A) from my account, and when my friend clicks "view profile" of the same account (account A) from his account, the profile shows differently. One shows gender/language (in addition to city and skype account name), and the other shows nothing but city and skype account name (no gender, no language). Why? Second, when I hover on an account name, there is no last activity, and no last seen on an account. What does that mean? How to make it happen on my account so that when someone hovers mouse on my skype name on his account, it shows no last seen, no last activity? I am asking this because when I block someone, that someone can still see my "last seen", and my "last activity" from his account when he hovers mouse on my skype name. So, blocking does not make your account "last seen", and "last activity" disappear? There is no "remove" option for someone who sent me "request to add to contact", but I did not approve and did not add to my contact (so I have only block option), right? Thanks!

More profile information is shown if users have shared contact details with each other, e.g. after a user has sent a request and the other accepted it.
Also the "Last seen.." and "Last activity..." information is client specific, e.g. you might see different information when checking this in the morning on your work laptop compared to in the evening on your home computer. That's because this information is about when this contact was last seen from that Skype instance, not in the Skype network in general.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

View profile parameters through RFC

Hi,
Do you know any RFC FM that allows you to view profile (start, instance, default) profiles' content?
I would like to receive a table, similar to the output of RSPARAM.
cheers,
Ivan.

Hi,
Sorry for intervention. I have just tried "test"-ing the FM PFL_MODIFY_PARAMETER. When you test(F8) it, in the following screen you will have "import parameters" and "Tables" sections.
In the tables section you have PAR_VALUE_TAB, PAR_COMMENT_TAB, PAR_TAB.You can double click on the PAR_VALUE_TAB and in the next screen it will ask Profile name and the parameter you want to change.
Hope this is what you're looking for.
Regards,
Srihari

Equipment View Profiles????

Dear All,
I have a question about the equipment views profiles
After creating eq. category X there was four standard views BUT after creating the view profile and assign it eq. category only the views in this profile appear and the other four is not appear ??????
As i know the profiles is created to add new tabs/screens why the standard ones is not appear and what is the solution.
thanks in advance

hi
What are the four standard view that doesn't appear. Even if yuo do not assign the view profile to the equipment category ,system will display some standard view while creating equipment master like General data.Location etc.if you assign the view profile to the equipment category then it will overrite the standard one .hence whatever the tabs mentioned in the View profile will only get displayed
regards
thyagarajan

How do I "archive" masses of old emails IN ORDER TO SHRINK MY "PROFILE" SIZE and yet be able to access them possibly in a different profile?

In order to have quicker "profile" backups... I have emails dating back to 1996, about 15GB, and do not want to delete any of the old email, and, at the same time do not need to look at most of the old email, although I may sometimes do a search for something; now, backing up the 15GB profile is time consuming and if I "archived" (saved the old stuff, possibly under a separate profile), then that profile might be 14GB, which, when backed up would not need to be re-backed up, and my daily use profile might be 1GB which would be much easier to back up on a regular basis. I managed to create another profile and I wonder if I can just copy those "folders" in my profile that I want to "archive" into the new profile? And, it is not clear to me how to have both profiles displayed in the same instance of Thunderbird, but, if that is not possible, I'm OK with starting TB and specifying which profile I want for the current session. Thanks.

What I would do is export all of the folders you want to archive to an external medium and then delete them from the profile. If you need to look at an old email later, the export can be in HTML format for easy viewing.
There is an add-on to TB which allows export (and import) of emails in various formats to a separate storage medium (external disk, thumb drive, etc.).
The instructions on how to download and install it can be found at http://barryduggan.info/exportMail.php

Basic Order View - Define View Profiles

Similar Messages

Maybe you are looking for