Basic parameters to define the grouping for the Items and the BPs in SAPB1
Dear Friends,
What should be the basic parameters to define the grouping for the Items and the Business partners in SAP B1?
What will be the case when the client wants to classify the sales revenues various categories?
Hi
What should be the basic parameters to define the grouping for the Items and the Business partners in SAP B1?
For items:
Raw Material.
Capital Goods
Finished Item
Semi Finished Item.
Conusmables
Stationary .........etc
or .
Metal.
Rubber
Wooden.....etc
Bsuiness Partner
Foreign or domestic.
Region wise e.g South,North,East,West.
State wise e.g MH,KT,DELHI,GOA....ETC
What will be the case when the client wants to classify the sales revenues various categories?
SIMILARLY
Foreign Revenue, Doomestic Revenue, Region Wise Revenue, State wise, Or Territory wise.......etc
I hope this clarifies you
Ashish Gupte
Similar Messages
-
my iphone5 is stuck at the i tunes logo whenever i try to restore it the iphone reboots at the waiting for iphone stage and the i tunes logo appears againe
Water damage is really a tough hurdle to get over if the steps you have already tried do not work.
The next step would be to tranfer your Logic Board to a working 3GS to see if it works.
If the Logic Board is good or you just want to try one more thing, try cleaning the Dock Port very well with Isopropyll Alcohol. If still problem, at most replace the Dock Port Assembly.
Throwing good money after a bad iPhone is not a good idea. -
Message about iCloud backup and it won't clear. It also won't allow the iPad to do anything else. It is plugged in and now locked. The slides to open iPad and the one to power off do not work. I have the iPad plugged in and have pressed ok on the message numerous times.
Welcome to the Apple Community.
Try restarting the iPad and seeing if that helps.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again. -
Definning SPK (30) for BOM item in the tcode cs02
hello,Guru's
i want Tcode or Path
for definning special procurement key
30-subcontracting for
item in the tcode cs02
regards,
mysDear ,
Goto OPPQ
1.assign 30 in SP type,
2.procurement type F,
3 Special Procurement :L
4.As BOM Component
Activate Direct Procurement
Now in BOM CS01 or CS02, Sekect the item you are doing Subcotracting and in Basic tabe page u have Special P.Key filed .Aassing 30.
Hope this will work for your requirement.
Reward point if useful.
Regards
Jia -
Ungroup a group and keep the scriptlabel for each item of the group
Hi
does someone know how to ungroup a group of rectangles with a certain label (example groupA) an give each rectangle a own label (the same text groupA)
I can find the group and ungroup it but I can't label the rectangles...
var oPageItems = app.activeDocument.allPageItems;
for (var j = oPageItems.length-1; j >= 0; j--) {if (oPageItems[j].label==("groupA")) {oPageItems[j].ungroup();)
Please helpHi,
before
oPageItems[j].ungroup();
go into the loop and set proper label to each item inside group:
for (var k; k < oPageItems[j].length; k++)
oPageItems[j][k].label = "groupA";
assuming your oPageItems[j] is a group indeed.
hope... -
can it be saved? i know the rice thing has worked for other people but the bottom have of the screen is in basically small fragments so it probably got extra wet...
If you take or send it to Apple for the broken screen, they will replace your iPod (for a significant price) with an equivilant refurbished model. It doesn't matter what else is wrong with it.
-
After installing the latest update to itunes, and my ipod, I can no longer sync my computer and my ipod nomatter what I do. I have tried everything I know and can read. I am beginning to think it has something to do with the password that I changed, but I tried to change it back and nothing happens. Does anybody have any suggestions. I have been working on this for three hours and I can't figure it out? Apple is no help and it was their updates that messed the whole thing up.
Kathy295http://kb.mozillazine.org/New_messages_do_not_appear
-
What is the criteria for showing items in the Add items LOV for MDS?
I am trying to create an MDS. When I try to add the Item I (that is enabled in this Org), I do not see the item in the LOV. Any idea what setup needs to be done that I might be missing?
case closed.
The problem was that I had not set the item to be an inventory item. After checking the inventory item checkbox, I am able to add the item to MDS.
So, this is another requirement (in addition to the planning method). Thanks for your help Kevin and Ricardo. -
Unable to update apps. Use iTunes password and program thinks for a couple of seconds and the goes back to original position.
What's the original position?
Does the screen asking for your password have a different Apple ID that the one you currently use? If so the app must have been downloaded with that different Apple ID. You will have to enter the password for that original Apple ID because downloaded or purchased apps are always associated with the ID used to download o urchase them. -
Bought the watch for my nano and the face is clock face is sideways
I bought the watchband for my nano today and the clock face is sideways. I am betting there is a simple explanation but I am not seeing it. Thanks!
Turn on the display and place two fingers on the display and rotate it until you get to the right position.
-
table of content in a landscape orientation.
I want to have in my table of content only image and the name of the chapter which is each to do.
my problem when I am draging an image to each chapter it copied it to all chapter although I am marking only the specifc chapter.
why? how can i overcome it?Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert -
Is the login for Creative Cloud and the Forums the same or different?
When I log in to CC I see my name and when I login to the Muse forums a screen name I used a while back shows up. Not sure if this is related or not but I cannot install the latest Muse due to a "cerificate problem".
Hi Computer guy,
welcome to Adobe Forum,
1. To log in to creative cloud: use: www.creative.adobe.com
2. To log in to Forums: use: http://forums.adobe.com/index.jspa
Regards,
Rajshree -
Hide "more" button in a list view, only works for first item in the list
I have the following code in a list view that outputs several dozen items in a web app. The code only works for the first item, how can I make it loop through and execute the test for each item in the list view? The {tag_hide more button} is a checkmark field that yields a numeric 1" if checked otherwise yields a numeric "0".
<div id="more-option">
<p class="right"><a href="{tag_itemurl_nolink}" class="btn btn-small btn-very-subtle">More →</a></p>
</div>
<div class="more-selection" style="display: none;">{tag_hide more button}</div>
<script>
if ($(".more-selection").text() == "1") {
$("#more-option").hide();
</script>What's the URL for the site where you are using this? Offhand, it looks like it should work with your first example so you are either placing the script before those elements are loaded or you might try wrapping your current javascript inside the:
$(document).ready(function() {
--- your existing javascript here
This make sure the code runs once all the html is loaded on the page. Without seeing a URL and debugging with the js console in Chrome I can't give you a solid answer.
But, I do know that you can probably do this with a lot less markup. Once we figure out what the actual problem is I have a better solution mocked up for you on jsfiddle.
When looking at my HTML code on jsfiddle, please realize I setup some dummy HTML and removed your tags and added actual values which would be output by your tags. The main thing I did was remove the whole div.more-selection and instead, added a "data-is-selected" attribute on your div.more-option element. Then, in my javascript for each div.my-option element on the page, we loop through them, find the value of that data attribute and hide that div if it's less than 1 (or 0).
Here's the fiddle for you to look at: http://jsfiddle.net/thetrickster/Mfmdu/
You'll see in the end result that only two divs show up, both of those divs have data-is-selected="1".
You can try pasting the javascript code near the closing </body> tag on your page and make sure to wrap my js inside a <script> tag, obviously. My way is neater on the markup side. If you can't get it to work it's likely a jquery conflict issue. My version is using the $(document).ready() method to make sure all the code is loaded before it runs.
Best,
Chris -
My apple tv (1st gen) alternatly shows the apple for 30 sec. and then the menu for few seconds and the apple again, like it was restarting. I can't do any operations
Welcome to the user to User Technical Support Forum provided by Apple.
Please do not post your Apple ID on a Public Forum. I have requested the Hosts remove your Personal Information.
Thana Chootabtim wrote:
'Your Purchase Could Not Be Completed'
For assistance, contact iTunes Support....
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Serial Number assignment for main items and sub items
Hi
All, good evening, i need clarificaction on the serial number assignment. My client's requirement is to maintain the serial numbers, so in this regard when i am confirming production order in this i need some information how the serial numbers are picked and consumed for main items and the sub items.
I need someone to help me in solving this.
Regards
Narsingdear Narsing,
please look here:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c817b3f911d1896e0000e8284931/frameset.htm
Maybe you are looking for
-
8.1.7.2.1 patch set. (8i server patch set for windows )
Hi, Please, where may I find the patches for 8.1.7 server to download. I do not have access to metalink. I urgently need these patches. Thanks
-
How to set our favourite song as ringtone?
Hai Friends, I don't know how to set our favourite song or favourite cut song as a ringtone for my IPhone 5s, so can u help me to solve my query? And if any applications available for set our favourite ringtone means tell me guys...
-
Now that Lightroom gets really stable and powerful, maybe we have a better chance to get some of the "smaller issues" resolved as well? One feature which would interest me would be indication of the cropped size while performing the cropping. Lightro
-
Photoshop elements and Canon 6D raw
Can i use PSE 10 and the raw files from my 6D, or is it still not possible?
-
Pb to download photoshop CC trial
Download of Photoshop CC trial version doen't start. 1st install of Photoshop. Windows 8.1 warning appear and then nothing else.