Basic Portal Server 6.0 install questions
Background:
I am currently running iPlanet Portal Server 3.0 SP4. The gateway and portal server are running on the same host. I am also using a seperate Sun One Directory Server 5.1 for portal authentication.
I am going to wipe out the current portal server and install the Sun One Portal Server 6.0. The new gateway will be installed on a seperate host. We are going to keep our existing Directory Server 5.1.
Here are my questions:
1) I don't know where to put the Netlet Proxy and Rewriter Proxy. I can put it on the gateway host or the portal host. Both boxes are comparable in horsepower but the portal host has four times the disk space. Don't know which config is more efficient.
2) I don't understand what the iDS/AME piece is or where it goes. Is this something that gets installed on the existing Directory Server host? Or does it get installed on the Portal host?
3) The install docs say that you need to install patch 113177-01 on your directory server if the install was not done using the Portal Server install procedure. We are using an existing Sun One Dir Server 5.1 so I tried to install the patch and it says I don't have the required packages installed. It looks like it's missing SUNWamds. What is this package?
Thanks for any information you can provide.
A Sun engineer contacted me with the answers
Similar Messages
-
Crystal Reports Server 2008 V1 - Install Question
I have been unable to find why there are 3 parts for download. I have downloaded them, and ran the first setup, which went through with only a few prompts, not giving me the opportunity to select IIS instead of Apache.
Why are there 3 downloads and which to use or what to do with them? I really appreciated your help!Hi Trina
if you store all parts in the same directory and do not rename them then the .exe with extract the files from all 3 packages at the beginning automatically and then start the installation.
Regards,
Stratos -
Portal server question, pls help!
Hello,
I have Portal server 5.04 installed in my local PC. It works well until I modified LoginActions.xml file. After I changed LoginActions.xml, I could not login to portal any more and got "The server has experienced an error. Try again, or contact your portal administrator if you continue experiencing problems" error. Then I changed LoginActions.xml file back to original one. However, I still could not login and got the same error.
I am wondering if there is cache in the server and how can I restart Portal server and kill the cache? I rebooted IIS server, but it didn't help.
Thanks in advance!I got three lines of error code from PTSpy:
Error 1:
Location: com.plumtree.uiinfrastructure.activityspace.Redirect.GetSpaceName() Message: Attempting to read from redirect before the space has been set.
Error 2
Loction: com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest() Message: Unable to proccess request._System.NullReferenceException_ at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRedirects(Redirect myRedirect, RequestData tempData) _ at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)
Error 3:
Location: com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError()
Message: Server error._System.NullReferenceException_ at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRedirects(Redirect myRedirect, RequestData tempData) _ at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)
I am using UI Source Code.
Thanks again! -
Hi,
After installation of JSE(Windows Version),
I can access the identity admin console with url
http://host:port/amconsole
But I can't use the url
http://host:port/portal or
http://host:port/portal/dt
to access Portal Server Desktop, the browser
receive an 500 Internal Error Message.
The summary report after installation is
Installation Summary Report
Install Summary
Sun Java System Message Queue 3.0.1 Service Pack 2 : Installed, Configured
Sun Java System Application Server 7 Update 1 : Installed, Configured
Sun Java Studio Enterprise 6 2004Q1 : Installed, Configured
Sun Java System Web Server 6.1 Service Pack 1 : Installed, Configured
Sun Java System Directory Server 5.2 : Installed, Configured
Sun Java System Identity Server 6.1 : Installed, Configured
Sun Java System Portal Server 6.2 : Installed, Configured
PolicyAgent: Installed, Configured
It seems nothing wrong, and how can I solve
this problem?
Many thanks,So, you got Java SE installed. Great. (I've been following your other thread re: installing IS and PS properly).It's not exactly right. I try to use Windows 2000 to install JES and with the same DNS configuration.
It works. But I still can't install IS/PS correctly in the original machine(Win XP).
Check the troubleshooting info in the Java SE Install Guide, I believethis error is covered in there. Be sure you use a new instance of your browser to access the PS desktop. And, be sure to check the supported browser list in the Release Notes.
I go through the overall Install Guide, it's really that I can't find and answer to solve my problem :'(
Regards, -
Portal server 7.2 ASCTabContainer
HI All,
I have installed Sun Portal server 7.2 on Sun GlassFish Enterprise Server v2.1 (9.1.1) (build b60e-fcs).Portal server is successfully installed but I am not able to find ASCTabContainer .
Plz tell me how to get ASCTabContainer in portal server 7.2
Thanks in Advance
MadhuI also installed Portal 7.2 with remote X and I had no such problem.
-
Basic install question for Flex on CF 7.02
Hello,
I've been trying to get Flex working on CF 7.02 and I'm
reading very different and conflicting stories.
Firstly I have CF 7 running on 2003, and then installed the
updates for7.01 and then 7.02 .
I installed as a single server instance.
Reading here, I just need 7.02 and I should be fine
http://www.adobe.com/devnet/coldfusion/articles/fr_fds.html
This here tells something completely different, with lots of
config files
http://www.adobe.com/support/documentation/en/flex/1/flexforcf.html
What is most annoying is that I had it working on a local
server and it was fine. But this was installed over a year ago, and
I don't have a steps taken that made it work. That server is now
being used for something else.
I don't know if I need the FDS or Lifecycle to be installed
as everything I read says FDS is part of CF.
I have also read that FDS express can be downloaded and run
on a Java server, and that it doesn't need cF, but this in not the
solution to my problem..
To summerize:-
I need to get Flex apps running on CF 7.02 in a production
environment.
Do i need do install anymore than CF, if so how much does it
cost?
I'm not a CF programmer, and don't know much about it, I
usually deal with MS stuff
Thanks very muchThanks again EJ, I really appreciate your ongoing help here. With some difficulty I was able to post this;
https://communities.oracle.com/portal/server.pt/community/view_discussion_topic/216?threadid=380585&Portlet=Create%20Discussion&PrevPage=Communities-CreateDiscussion
I just want to verify this new community is set-up correctly; I have two accounts for the Oracle site, this one (linked to my gmail email) and another linked to my work email (I can log support cases with the latter).
I'm not able to hit that community from this account (linked to my gmail email), the error I get is;
We are sorry, we could not log you in. We apologize for the inconvenience. One of the following might have happened: You don't have a valid Customer Support Identifier. Your privileges are not up to date. This should be resolved by logging in into My Oracle Support. Internal error in the login process.
The bit about the support identifier in the error message led me to try my work account - with some trouble I was able to get in and post the question above.
Is this new community only open to people with a support identifier?
EDIT>>>>: Getting that error with both accounts now. I realize you don't "support the forums", just let me know if you think the new forum has been setup correctly. Thanks again EJ.
Paul
Edited by: Paul Smith on 21-Jun-2012 12:35
Edited by: Paul Smith on 21-Jun-2012 12:38
Edited by: Paul Smith on 21-Jun-2012 12:38 -
MFA Server - User portal and mobile app web server should be installed where?
Hi. We are in the process of testing the Multi-Factor Auth server and are currently using it for two-factor authentication to RDS for a couple of users. At the moment we are only using the phone call/text options but I'd like to get the mobile app portion
working to test. Also still need to implement the user self-service portal for testing.
Currently I have a vm that was dedicated to MFA where the Multi-Factor Authentication Server software was installed. Now though I'm a bit confused as to if its safe to install the user portal and mobile app web service portion on this same machine
or if they should go on a different server(s)? Currently the box is internal but I'm guessing if it has also act as the web server we would stick it behind the TMG for external inbound access. Is external access to the primary MFA server ok?
What's the best practice for separation of the MFA roles; or is there none and its fine to just put it altogether?
Thanks.Hello Col. Forbin,
Thanks for posting here!
You have a dedicated MFA server and if you install User Portal on the same server as the MFA Server, it uses RPC to communicate with the MultiFactorAuth service locally.
If the User Portal is installed on a different server, it must connect via the Web Service SDK. You can use either a username/password of a service account that is a member of the PhoneFactor
Admins security group, or you can configure client certificates. If using the username/password, you can encrypt the appSettings section of the web.config file if desired.
Under Inetpub\wwwroot\MultiFactorAuth when you edit the web.config file you need to make sure these values are set.
USE_WEB_SERVICE_SDK:
true
WEB_SERVICE_SDK_AUTHENTICATION_USERNAME: domain\user
WEB_SERVICE_SDK_AUTHENTICATION_PASSWORD:
password
OVERRIDE_PHONE_APP_WEB_SERVICE_URL:
You might want to refer this thread link:
https://social.msdn.microsoft.com/Forums/en-US/ad1f6fc1-ab3f-482d-a435-e4fd6665f640/mfa-user-portal-issue?forum=windowsazureactiveauthentication
Additional reference links:
https://technet.microsoft.com/en-us/library/dn376347.aspx#multifactor
https://pfweb.phonefactor.net/install/6.2.1.16387/release_notes.txt
Let me know if you have any further questions!
Regards,
Sadiqh Ahmed -
Tiger and a Microsoft SharePoint Portal Server MySite Question
Hello all-
We're running Microsoft Sharepoint Portal Server 2003, and we just got an iMac running OS X Tiger (10.4.6) for our graphic artist.
Using Firefox, I can get to our intranet (intranet.comapny.com) just
fine, and the user can get to her My Site and open docs, upload files, etc.
What I need to do is set up an alias to her Private Documents folder
and her Team Site's document folders.
If I go to Go> Connect to server and type in
http://intranet.company.com/mysite I can see the following folders:
_catalogs
_private
_themes
images
Lists
and the Default.aspx file.
There's no Private Documents folder visible like there is on all my
Windows boxes for the same shortcut.
The list of folders should look like this (items in bold are missing):
_private
images
Lists
My Pages
My Pictures
Private Documents
Shared Documents
default.aspx
Basic authentication is turned on for the intranet portal, and I'm able
to authenticate to AD from the iMac.
Any help would be greatly appreciated.
Thanks very much,
Joe
20" iMac Intel Duo Mac OS X (10.4.6)Your question may be better handled in the
AWS Support forums.
Jason Warren
habaneroconsulting.com/Insights
@jaspnwarren -
Hi,
HW: Sun Solaris 2.8
I would really appreciate it you can cc: me if you can shed any light
as
to whats going wrong, and what I should do to fix the following
problem.
Portal server doesn't allow one to access /console (or /login) -
0 length document is returned.
We find the following in the enterprise server error log, when we
attempt
to access portal console (URI: http://....:8080/console)
1) Installed SP3.0sp3a as Open Portal, i.e without the gateway and
without
SSL enabled.
2) Our Unix users are served using YP
***From the server access logs : ***
- - [16/Nov/2001:15:12:40 -0800] "GET /login HTTP/1.0" 503 0
***From the server error logs : ***
[16/Nov/2001:14:11:27] info ( 4639): successful server startup
[16/Nov/2001:14:11:27] info ( 4639): iPlanet-WebServer-Enterprise/4.1SP7
BB1-04/05
/2001 18:30
[16/Nov/2001:14:11:28] info ( 4639): Loading Simple Session Manager by
default. Sp
ecify MMapSessionManager in servlets.properties to load persistent
session manager
[16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Default
values for maxi
mum number of sessions is 1000 with a time out value of 1800 seconds
[16/Nov/2001:14:11:28] info ( 4639): SimpleSessionManager: Maximum
number of sessi
ons (1000) with a time out value of (1800) seconds
[16/Nov/2001:14:12:40] info ( 4639): Internal Info: loading servlet
login
[16/Nov/2001:14:12:41] info ( 4639): Internal Info: loading servlet
pllservice
[16/Nov/2001:14:12:41] info ( 4639): pllservice: init
[16/Nov/2001:14:12:42] failure ( 4639): Internal error: exception thrown
from the
servlet service function (uri=/login): java.lang.NullPointerException,
stack: java
..lang.NullPointerException
at
com.iplanet.portalserver.auth.service.AuthD.printProfileAttrs(Compiled
Code)
at
com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:160)
at
com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
at
com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled C
ode)
at
com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.j
ava:990)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at
com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunne
r.java:507)
, root cause:
Many thanks for your responses on this.
Tarang Kumar Patel. WWW home:http://ic-www.arc.nasa.gov/ic/
NASA Ames Research Center, MS 269-2, Moffett Field, CA 94035-1000
Email: [email protected], Tel:(650) 604-4721 fax: (650) 604
3594
Stated views are my own IDEA, as I'm another I.D.E.A man "I Didn't
Explain All"Just one more thing:
I made the following setting in platform.conf
ips.debug=on
Now, the trace I see on the STDOUT/STDERR stream reveals :
Received RequestSet XML : <?xml version="1.0" standalone="yes"?>
<RequestSet vers="1.0" svcid="profile" reqid="2">
<Request sid="qxcuekwwdrcfwubmmwuip82764q94o37r67n@[email protected]@8080@z
repvc"><![CDATA[<ProfileService ver="1.0" reqid="0"><GetProfile searchFlag="false"
admin="false"><Profile profileName="mercip/authentication" profileType="9"><Priv p
rivName="iwtSession-addSessionListenerOnAllSessions"/></Profile></GetProfile></Prof
ileService>]]></Request>
</RequestSet>
---->NEED TO FILL APPSHASH -----
getProfile.walktree
321^iwtSession-addSessionListenerOnAllSessions-pv
com.iplanet.portalserver.profile.service.ProfileServiceException: 321^iwtSession-ad
dSessionListenerOnAllSessions-pv
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Exception.java:42)
at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(
ProfileServiceException.java:47)
at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compile
d Code)
at com.iplanet.portalserver.profile.service.ProfileService.getProfile(Compi
led Code)
at com.iplanet.portalserver.profile.service.ProfileService.processProfileRe
quest(ProfileService.java:134)
at com.iplanet.portalserver.profile.service.ProfileService.processRequest(P
rofileService.java:123)
at com.iplanet.portalserver.profile.service.ProfileService.process(Compiled
Code)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(PLLR
equestServlet.java:139)
at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Co
de)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
.java:507)
ProfileResponse: exception key:321
ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
ProfileResponse.toXMLString:method id is 0
Sent ResponseSet XML : <?xml version="1.0" standalone="yes"?>
<ResponseSet vers="1.0" svcid="profile" reqid="2">
<Response><![CDATA[<ProfileService vers="1.0" reqid="0"><Exception>321^iwtSession-a
ddSessionListenerOnAllSessions-pv</Exception></ProfileService>]]></Response>
</ResponseSet>
ProfileResponse: exception key:321
ProfileResponse: exception string:iwtSession-addSessionListenerOnAllSessions-pv
ProfileUtils.getProfileResponse: Response content <ProfileService vers="1.0" reqid=
"0"><Exception>321^iwtSession-addSessionListenerOnAllSessions-pv</Exception></Profi
leService>
Profile Error:
Invalid attribute or privilege name
com.iplanet.portalserver.session.SessionException: Invalid attribute or privilege n
ame
at java.lang.Throwable.fillInStackTrace(Native Method)
at com.iplanet.portalserver.session.SessionException.<init>(SessionExceptio
n.java:30)
at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
(Session.java:642)
at com.iplanet.portalserver.session.Session.addSessionListenerOnAllSessions
(Session.java:502)
at com.iplanet.portalserver.auth.service.AuthD.<init>(AuthD.java:112)
at com.iplanet.portalserver.auth.service.AuthD.getAuth(AuthD.java:171)
at com.iplanet.portalserver.auth.service.LoginServlet.doGetPost(Compiled Co
de)
at com.iplanet.portalserver.auth.service.LoginServlet.doGet(LoginServlet.ja
va:990)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:701)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:826)
at com.netscape.server.http.servlet.NSServletRunner.Service(NSServletRunner
.java:507)
Authd Profile Attributes
cookieDomains
cookieName->iPlanetPortalServer
authHost:authPort->........:8080
authProto->http
authHostIP->.....
authHostURL->http://.......:8080/login/default
Lets hope this helps -
Installing Portal server on Solaris 10
hi,
I am installing portal server on a zone in Solaris 10 machine.Access Manager could be installed success fully . But now I am trying to install portal server. but it is showing installtion failed and configuratioin failed.
Are there any special steps to be followed fro installation of Portal server on a different zone.
The only product I have installed is the AM.
please advice
thanks in advance
dhawanmayurHi,
I ran into trouble because the installer "forgot" to install SUNWldapcsdk-tools, but later tried to use /opt/SUNWdsee/dsee6/bin/ldapsearch, which wasn't installed (and the error I got was just that installation and configuration failed).
You could either run the installer twice, first time just install the Directory Server, then manually install SUNWldapcsdk-tools (it is in Product/shared_components/Solaris_10/Packages directory), then run the installer again and install the other modules. Or you could get the Directory Server as a separate download, install that first (it is supposed to install everything you need, but I haven't tried it) and then run the installer for AM and the portal.
Cato -
Process.conf file not found after installing Sun One Portal Server 6.0
This extract is from the Sun One Portal Server development guide for logging error or logs in log file. This says that to generate the log, entry should be done to enable logging in process.conf file. I could not find any such file after installing Sun One Portal Server 6.0.
Any help will be appreciated...
Reporting Errors to the Robot Log File
When problems occur, robot application functions should return an appropriate response status code (such as REQ_ABORTED), and they should also log an error inthe error log file.
To use the error-logging functionality, you must include the file log.h in thesdk/robot/include/libcs directory. After you have ensured that log.h exists in the correct place, you can use the cslog_error macro to report errors. The prototype is in the following format:
cslog_error(int n, int loglevel, char* errorMessage)
The first parameter is not currently used (may be used in the future) You can pass
this as any integer.
The second parameter is the log level. When the log level is less than or equal to the log level setting in the file process.conf, the error message is written in the robot.log.Since removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings? -
Could not start the portal server after installing Portal Source Code
Hi all, I try to install the portal source code and compile portal source code on the development computer. It does not work. I use Visual Studio 2002. Now I can not start the portal server. I got the error. I delete source code from webapp\portal folder. I still get the following error.
948 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest() Unable to load request data._System.NullReferenceException_ at com.plumtree.uiinfrastructure.application.RequestData.LoadQSSettings() at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)949 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError() Server error._System.NullReferenceException_ at com.plumtree.uiinfrastructure.application.RequestData.LoadQSSettings() at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)950 03-14 11:16:20 Info UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.DisplayServerErrorPage() Server error, redirecting to error page.951 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError() Error displaying error page._com.plumtree.openfoundation.util.XPException_ at System.Environment.GetStackTrace(Exception e) at System.Environment.GetStackTrace(Exception e) at System.Environment.get_StackTrace() at com.plumtree.openfoundation.util.XPException..ctor(String message) at com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper.GetPersonalSettingValue(String sSettingName, ISessionManager sessionManager, IApplication application, IPTSession ptSession) at com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper.GetPersonalSettingValue(String sSettingName, AActivitySpace asSpace) at com.plumtree.portalpages.common.uiparts.NavigationModel.Init(AActivitySpace parent) at com.plumtree.uiinfrastructure.activityspace.AActivitySpace.RegisterModel(String modelName, String storageName) at com.plumtree.uiinfrastructure.activityspace.AActivitySpace.RegisterModel(String modelName) at com.plumtree.portalpages.common.uiparts.PlumtreeAS.Init() at com.plumtree.portalpages.common.error.ErrorAS.Init() at com.plumtree.uiinfrastructure.activityspace.Interpreter.CreateSpace(RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.DisplayServerErrorPage(RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError(Exception e, Boolean bDisplayErrorInComments, RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) at com.plumtree.uiinfrastructure.activityspace.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.ResumeSteps(Exception error) at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr) at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
I don't know how to fix this problem. Should I reinstall portal server? Thank you for your help! JanHi all, I try to install the portal source code and compile portal source code on the development computer. It does not work. I use Visual Studio 2002. Now I can not start the portal server. I got the error. I delete source code from webapp\portal folder. I still get the following error.
948 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest() Unable to load request data._System.NullReferenceException_ at com.plumtree.uiinfrastructure.application.RequestData.LoadQSSettings() at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)949 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError() Server error._System.NullReferenceException_ at com.plumtree.uiinfrastructure.application.RequestData.LoadQSSettings() at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application)950 03-14 11:16:20 Info UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.DisplayServerErrorPage() Server error, redirecting to error page.951 03-14 11:16:20 Error UI Infrastructure 3328 3340 com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError() Error displaying error page._com.plumtree.openfoundation.util.XPException_ at System.Environment.GetStackTrace(Exception e) at System.Environment.GetStackTrace(Exception e) at System.Environment.get_StackTrace() at com.plumtree.openfoundation.util.XPException..ctor(String message) at com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper.GetPersonalSettingValue(String sSettingName, ISessionManager sessionManager, IApplication application, IPTSession ptSession) at com.plumtree.portaluiinfrastructure.login.PTPersonalSettingsHelper.GetPersonalSettingValue(String sSettingName, AActivitySpace asSpace) at com.plumtree.portalpages.common.uiparts.NavigationModel.Init(AActivitySpace parent) at com.plumtree.uiinfrastructure.activityspace.AActivitySpace.RegisterModel(String modelName, String storageName) at com.plumtree.uiinfrastructure.activityspace.AActivitySpace.RegisterModel(String modelName) at com.plumtree.portalpages.common.uiparts.PlumtreeAS.Init() at com.plumtree.portalpages.common.error.ErrorAS.Init() at com.plumtree.uiinfrastructure.activityspace.Interpreter.CreateSpace(RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.DisplayServerErrorPage(RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleError(Exception e, Boolean bDisplayErrorInComments, RequestData tempData) at com.plumtree.uiinfrastructure.activityspace.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) at com.plumtree.uiinfrastructure.activityspace.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.ResumeSteps(Exception error) at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr) at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
I don't know how to fix this problem. Should I reinstall portal server? Thank you for your help! Jan -
Installing Portal Server 7.1 on Windows XP
I installed Portal Server 7.1 for Windows, via the Sun Java Application Platform Suite Installer. The installer was super clean and very easy--practically idiot-proof. It is substantially easier to install than the SPARC version.
However, during installation and configuration--done via the GUI--the Portal Server configuration failed. After performing all the necessary post-intallation tasks, I discovered that CACAO will not start. When I attempt to start CACAO, I get the following:
"Cannot start an unconfigured instance. "
--(This is a doc defect. The doc should tell me to configure before starting)
After attempting to configure, by following the instructions, I get the following error:
"Error handling error: 1722, LookupAccountName at <cacao-base>\cacao_2\\configure.pl line 120."
Is this a bug or is this yet another documentation defect? Anyone experience this during a Windows installation?Hi,
I'm also trying to install Portal Server 7.1 and configure the same , getting the same error
---------------- "Cannot start an unconfigured instance."
I went to the cacao log location "C:\Program Files\Sun\JavaES5\share\cacao_2\var\cacao\instances\default\logs" to find out the errors but could not find any log files there.
But when i went to the AM log location "C:\Program Files\Sun\JavaES5\identity\debug" . I found three files namely,
amEventService
amSDK
CCPPClientDetector
there contents are as follows,
In amEventService
03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
rminating! Persistent Searches will no longer be operational.
03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
ERROR: EventService.run() - Monitor thread is terminating! Persistent Searches will no longer be operational.
In amSDK
03/13/2007 06:07:23:365 PM IST: Thread[EventService,5,main]
ERROR: Connection to LDAP server threw exception:
netscape.ldap.LDAPException: failed to connect to server ldap://w2gzw3vm01.apac.corp.eds.com:1389 (91); Cannot connect to the LDAP server
at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:517)
at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:437)
at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:276)
at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:201)
at netscape.ldap.LDAPConnThread.connect(LDAPConnThread.java:109)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1081)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:952)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:903)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1050)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1060)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1005)
at com.iplanet.services.ldap.DSConfigMgr.getConnection(DSConfigMgr.java:387)
at com.iplanet.services.ldap.DSConfigMgr.getNewFailoverConnection(DSConfigMgr.java :354)
at com.iplanet.services.ldap.DSConfigMgr.getNewConnection(DSConfigMgr.java:283)
at com.iplanet.services.ldap.DSConfigMgr.getNewAdminConnection(DSConfigMgr.java:24 0)
at com.iplanet.services.ldap.event.EventService.addListener(EventService.java:351)
at com.iplanet.services.ldap.event.EventService.resetAllSearches(EventService.java :673)
at com.iplanet.services.ldap.event.EventService.run(EventService.java:515)
at java.lang.Thread.run(Thread.java:595)
and In CCPPClientDetector
03/13/2007 05:48:23:565 PM IST: Thread[main,5,main]
03/13/2007 05:48:23:565 PM IST: Thread[main,5,main]
ERROR: Could not get 'fediConfigRoot' from properties file:
03/13/2007 05:50:04:205 PM IST: Thread[main,5,main]
03/13/2007 05:50:04:190 PM IST: Thread[main,5,main]
ERROR: Could not get 'fediConfigRoot' from properties file:
03/13/2007 05:50:37:643 PM IST: Thread[main,5,main]
03/13/2007 05:50:37:643 PM IST: Thread[main,5,main]
ERROR: Could not get 'fediConfigRoot' from properties file:
03/13/2007 05:51:13:377 PM IST: Thread[main,5,main]
03/13/2007 05:51:13:377 PM IST: Thread[main,5,main]
ERROR: Could not get 'fediConfigRoot' from properties file:
any ideas on what I'm missing ?
Thanks in Advance,
Vinayagan -
Light weight custom portal server install to run webcenter blogs
Hi,
We are running PS6 UCM, we just leverage blog service provided by webcenter for blog functionality to be implemented.
Is there lighter version of webcenter custom portal server, that we could you just to run blog service and associated (document service) components.
Any pointers in this direction would be helpful.
Thanks,
Seshan K."Light weight custom portal". In terms of hard drive space or CPU and Memory?.
I don't know which license do you have for WebCenter (Portal, Content etc...).
In case of having a WebCenter Portal license (for document services components) Install WebCenter (extended for WCPortal Framework Applications) and just enable the Services or components that you are going to use (like CustomPortal and UCM servers only).
Regards. -
Installing Portal server, does it include App server?
Hi All,
I hope that you can give me a pointer on this one.
I want to use Portal server to develop portlets for .
when i will install it, would it automatically install Sun Application server with it or do i have to do it seperately.
I understand there is a Identity Server that must exist.
Will it be installed too or should i do it manually and then somehow show where app server/identity servers are?
If so , how can i show portal server where App Server is.
Thank you all very much
SergeHi Serge,
Just run the JES installer and select to install the portal server, the installer will automatically select the pre-requisites. When doing a sandbox installation, just install all components on one server:
- application server
- portal server
- access manager
- directory server
Be sure to read the release notes and the JES installation guide.
Regards, Robert
Maybe you are looking for
-
Site-relative links fail on local testing server
Using CS4/WAMP/XP, I have a testing server set up. All works well except that when I specify site-relative links, on the testing server they go back to localhost, not localhost/Frances. They work fine on the live site, but not on my testing server. T
-
OEM Problem in Communicating with Listener
Dear all, for some reason, my OEM is corrupted and when it's enabled, it messes up with the listener. I concluded the problem lies in OEM rather than in the listener since I can establish connection between SQLdeveloper and the server via the listene
-
Automatic filling of form table-fields in the document
Hi Gurus, We are working with sap RM on WAS640. In our Record Model we need to include a Word document that is to be used as a template. Inside the template we defined a table which has a fixed number of columns and one line which will be contains on
-
Open the "Merge Files into a Single PDF" utility via script or exe?
Greetings: I'm trying to find a method to open the Merge Files into a Single PDF utilty without opening Acrobat first. Does anyone have some example code on how to open this dialog window? It doesn't matter what language it is in, I can do the legw
-
Prompting to save report.
I support a program that generates a report in PDF format. One of my users is now being prompted to save the report every time they view it. In the past this was not the case, they could generate the report and print and close with no prompt to save.