Basic quality management

Hi All,
I have very very basic question regarding SAP quality management. Can anybody explain me how system determines
Which inspection type to use, .
which inspection plan to use,
which sampling procedure to use &
how the system calculates the sample size. &
who the link will be established between these objects.
I have business knowledge, but I donu2019t have any knowledge how it works in sap, Pleas help me.
Regards,
Smith

James
I think that you have had your question answered so if you are happy with this can you please award points if you want to but mainly can you please mark your question as answered so that it is easier to navigate around the open questions in the forum as the number of pages are growing and growing and it takes too long to go through everything expecially if a satisfactory answer has already been given and people like me who want to help will give up and so some people may not get any help.
Thanks for this
Frenchy.

Similar Messages

  • Basics of Oracle Quality Management

    Hello Everybody,
    Please provide the basics of Oracle Quality Management ( related to Process manufacturing).
    Thanks.

    Hi,
    Check the E-Business Suite documentation here. There is a manual called 'Oracle Process Manufacturing Quality Management User's Guide' under Process Manufacturing.
    Regards.

  • Quality Manager - Clearing Unscored Call recordings

    Probably a very basic question, but unfortunately I'm not yet familiar with this product.
    Some of our supervisors wish to clear out a backlog of "Unscored" recordings from the list in Quality Management Desktop, so that they can start with a clean slate the following week.
    Can anyone advise how to do this? I've searched documentation and googled but haven't had much luck.

    Hi
    The unscored reports will eventually disappear.
    You set different retention periods for scored and unscored recordings in the admin tool.
    The idea is that you might for example set:
    2 weeks for unscored
    1 week for scored
    Then your scored recordings would disappear after being available for a week for review, and the unscored ones will be around longer to allow time to get round to scoring them.
    The scores are then kept on file (along with answers to the rating questions etc) for reporting purposes.
    The retention periods are configured on the Workflow in QM Desktop Administrator...
    Regards
    Aaron
    Please rate helpful posts...

  • Quality Manager no record the calls.

    Hi everyone
    I'm Deploying a Recording QM solution and it does't record the calls.
    I'm using a Network Recording enviroment with CUCM 8.6, CCX 8.5(su4) and QM 8.5.2.18
    I've followed the QM Configuration Guide and the CUCM monitoring a recording configuration guide to setup the QM. 
    Postinstall process was good, without any errors.
    Agents have basic license, and workflow is configured.
    I can see RTP packets coming from Agents pohones on call to Windows 2008 QM server using Wireshark.
    But any audio files is saves in the Recording folder.
    I have found some error in log files releated with SQL DB, But I checked the SQL information, and it is ok.
    I have attached a RecordSErver0001.dbd error as well.
    RecordSErver0001.log
    2014-03-23 23:00:14:348 INFO SL4007 The Windows NT service has started.
    2014-03-23 23:00:16:407 INFO SOCKET0000 <RecordService> service on port <59102> has started.
    2014-03-23 23:00:16:469 INFO MS0001 Socket service has been started.
    2014-03-23 23:00:19:932 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:00:23:630 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:00:51:959 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:00:55:657 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:01:24:017 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:01:27:699 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:01:56:075 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:01:59:757 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:02:28:118 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:02:31:784 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:03:00:176 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:03:03:724 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:03:32:131 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:03:35:766 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:04:04:158 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:04:07:808 INFO QM0001 Unable to retrieve 'recording storage location' with error '-1'.  Retries will occur automatically.
    2014-03-23 23:09:43:225 INFO STD0004 Client <Primary_CTI> connected to service at <10.10.10.5>.
    2014-03-23 23:27:01:859 INFO CTI0001 An error was received from the QM CTI Server for client with MAC address '': 'Provider Down.'
    ctiservice.log
    2014-03-23 23:04:44,578 INFO  QMCT0000 Server is listening at port <52102>.
    2014-03-23 23:04:50,022 INFO  QMCT0000 Opening JTAPI Provider Primary='10.10.10.2' Username='QM'...
    2014-03-23 23:04:52,471 INFO  QMCT0000 SQM CTI Service ready.
    2014-03-23 23:05:49,006 INFO  QMCT0000 Client Connected <10.10.10.5>
    2014-03-23 23:05:49,053 INFO  QMCT0000 Sending Response <10.10.10.5>: Head[26,158,1]InvokeId=1;StatusCode=0;StatusText=OK;StatusMemory=0,0439;StatusThreads=0,0033;<
    2014-03-23 23:06:14,590 INFO  QMCT0000 TimeoutTimer[HeartbeatTimer] Timeout Items=0 - FreeMem=4784304 TotalMem=16252928 MaxMem=259522560.
    2014-03-23 23:09:43,225 INFO  QMCT0000 Client Connected <10.10.10.5>
    2014-03-23 23:09:44,223 INFO  QMCT0000 Sending Response <10.10.10.5>: Head[26,158,1]InvokeId=1;StatusCode=0;StatusText=OK;StatusMemory=0,0446;StatusThreads=0,0033;<
    2014-03-23 23:09:44,239 INFO  QMCT0000 <Agent[type=Network,dev=SEP000C298D44C2,ip=10.10.10.5,id=1.PC2]> created successfully.
    2014-03-23 23:09:44,254 INFO  QMCT0000 <Agent[type=Network,dev=SEP000C298D44C2,ip=10.10.10.5,id=1.PC2]> registered successfully.
    2014-03-23 23:09:44,254 INFO  QMCT0000 <Agent[type=Network,dev=SEP000C290478A3,ip=10.10.10.5,id=1.PC3]> created successfully.
    2014-03-23 23:09:44,254 INFO  QMCT0000 <Agent[type=Network,dev=SEP000C290478A3,ip=10.10.10.5,id=1.PC3]> registered successfully.
    2014-03-23 23:09:44,270 INFO  QMCT0000 <Agent[type=Network,dev=SEP000C29B5DB52,ip=10.10.10.5,id=1.PC1]> created successfully.
    2014-03-23 23:09:44,270 INFO  QMCT0000 <Agent[type=Network,dev=SEP000C29B5DB52,ip=10.10.10.5,id=1.PC1]> registered successfully.
    2014-03-23 23:15:43,039 INFO  QMCT0000 Client Connected <10.10.10.5>
    2014-03-23 23:15:43,039 INFO  QMCT0000 Sending Response <10.10.10.5>: Head[26,158,1]InvokeId=1;StatusCode=0;StatusText=OK;StatusMemory=0,0476;StatusThreads=0,0033;<
    2014-03-23 23:27:01,859 INFO  QMCT0000 NT Service requested shutdown <QM CTI Server[Configuration[10.10.10.5:52102][30,3]][running=true]>
    2014-03-23 23:27:01,859 INFO  QMCT0000 Shutting down request handling...
    2014-03-23 23:27:01,859 INFO  QMCT0000 Server no longer listening on port <52102>.
    2014-03-23 23:27:02,124 INFO  QMCT0000 Request handling shutdown complete.
    2014-03-23 23:27:02,124 INFO  QMCT0000 CTI Service shutdown complete.
    2014-03-23 23:27:03,372 INFO  QMCT0000 VERSION INFO: <Quality Management - ctiservice>: Version <8.5.2.18>
    2014-03-23 23:27:03,372 INFO  QMCT0000 NT Service requested start.
    2014-03-23 23:27:03,856 ERROR QMCT2006 Cannot load configuration from Data API Service.
    2014-03-23 23:27:03,856 ERROR QMCT2000 Could not retrieve configuration <Cannot load configuration from DB.>.  Retry in <30000> ms.
    2014-03-23 23:27:33,886 ERROR QMCT2006 Cannot load configuration from Data API Service.
    2014-03-23 23:27:33,886 ERROR QMCT2000 Could not retrieve configuration <Cannot load configuration from DB.>.  Retry in <30000> ms.
    2014-03-23 23:28:03,947 ERROR QMCT2006 Cannot load configuration from Data API Service.
    2014-03-23 23:28:03,947 ERROR QMCT2000 Could not retrieve configuration <Cannot load configuration from DB.>.  Retry in <30000> ms.
    2014-03-23 23:28:34,008 ERROR QMCT2006 Cannot load configuration from Data API Service.
    2014-03-23 23:28:34,008 ERROR QMCT2000 Could not retrieve configuration <Cannot load configuration from DB.>.  Retry in <30000> ms.
    2014-03-23 23:29:04,054 ERROR QMCT2006 Cannot load configuration from Data API Service.
    2014-03-23 23:29:04,054 ERROR QMCT2000 Could not retrieve configuration <Cannot load configuration from DB.>.  Retry in <30000> ms.
    2014-03-23 23:29:32,758 INFO  QMCT0000 NT Service requested shutdown <null>
    2014-03-23 23:29:32,773 INFO  QMCT0000 CTI Service shutdown complete.
    dbproxy.log
    14-03-23 22:02:05,442 INFO  QMDP0000 VERSION INFO: <Quality Management - dbproxy>: Version <8.5.2.18>
    2014-03-23 22:02:05,442 INFO  QMDP0000 NT Service requested start.
    2014-03-23 22:02:05,894 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:02:05,894 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:02:35,924 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:02:35,924 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:03:05,954 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:03:05,954 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:03:35,984 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:03:35,984 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:04:06,015 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:04:06,015 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:04:36,045 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:04:36,045 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:05:06,075 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:05:06,075 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:05:36,105 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:05:36,105 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:06:06,135 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:06:06,135 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:06:36,165 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:06:36,165 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:07:06,195 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:07:06,195 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:07:36,225 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:07:36,225 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:08:06,255 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:08:06,255 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:08:36,285 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:08:36,285 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:09:06,315 ERROR QMDP2001 Unable to load database connection properties from Data API Service
    2014-03-23 22:09:06,315 ERROR QMDP2003 Could not initialize RequestManager. Verify DB connection information is correct. Will retry in 30000ms.
    2014-03-23 22:09:36,626 INFO  QMDP0000 Server is listening at port <52103>.
    2014-03-23 22:14:42,839 ERROR QMDB2001 SQM database execute failed: The INSERT statement conflicted with the FOREIGN KEY constraint "EventAudit_person_FK". The conflict occurred in database "SQMDB", table "dbo.Person", column 'id'..
    2014-03-23 22:16:06,845 ERROR QMDB2001 SQM database execute failed: The INSERT statement conflicted with the FOREIGN KEY constraint "EventAudit_person_FK". The conflict occurred in database "SQMDB", table "dbo.Person", column 'id'..
    2014-03-23 22:16:11,431 INFO  QMDP0000 NT Service requested shutdown.
    2014-03-23 22:16:11,431 INFO  QMDP0000 Server no longer listening on port <52103>.
    2014-03-23 22:16:11,431 INFO  QMDP0000 DB Proxy shutdown complete.
    mana.log
    2014-03-23 23:25:42,626 INFO  MANA0000 Running polling diagnostic...
    2014-03-23 23:26:01,799 ERROR QMMN2016 Unexpected error while getting call data for CM task.
    2014-03-23 23:26:01,908 INFO  MANA0002 Notification: <2014-03-23 23:26:01 QM1000 [CATASTROPHIC] Mana no pudo conectarse a Quality Management CTI Service (10.10.10.3): RECHAZADA>
    2014-03-23 23:26:01,908 INFO  MANA0000 Polling diagnostic finished.
    Any aideas?
    Thank you

    Did you ever get this resolved?  This product is horrible.  I fix one thing and then another is broken.

  • Telstra Gateway Max aka Technicolor TG799vac lacks basic Quality of Service

    Hi, I have recently moved to a plan that included the Telstra Gateway Max for free, and have also recently opted-in to Telstra Air which I think is wonderful. Problem. These Technicolor TG799vac modem/routers which Telstra is providing (are actually a very high quality, highly finished product), are missing 1 key feature. My plan also came with a free T-Box which I can watch Foxtel on T-Box, Presto, Bigpond TV, Bigpond Movies, and other great content. Except the Gateway Max does not have even basic "QoS" features. QoS is an acronym for Quality of Service. It provides that certain traffic on your local network can be marked as a higher priority than other less important content. For instance. VoIP (Voice over IP) usually has #1 priority, usually followed by video, and then other content like HTTP (normal downloads) and Bit Torrent etc are all just normal quality. https://en.wikipedia.org/wiki/Wireless_Multimedia_Extensions "Wireless Multimedia Extensions (WME), also known as Wi-Fi Multimedia (WMM), is a Wi-Fi Alliance interoperability certification, based on the IEEE 802.11e standard." "It provides basic Quality of service (QoS) features to IEEE 802.11 networks." "WMM prioritizes traffic according to four Access Categories (AC) - voice, video, best effort, and background. However, it does not provide guaranteed throughput. It is suitable for well defined applications that require QoS, such as Voice over IP (VoIP) on Wi-Fi phones (VoWLAN)." This WMM standard is a highly important standard for modem routers because if I'm downloading some random large file on one computer which consumes all available bandwidth (speed), my T-Box instantly degrades and becomes unwatchable. My plan comes with unlimited calls anyway plus my mobile comes with unlimited calls on a Telstra competitor so I don't personally have any use for VoIP. My main concern is the lack of Quality of Service for video content. Given we now have Telstra Air I do wonder what happens when a guest user consumes all available bandwidth (speed) is that going to affect my T-Box negatively? I understand there is QoS built into Telstra Air such that the guest user cannot hog all your bandwidth (preference is given to the host customer over the guest customer) however that's as far as QoS goes with Telstra. I would urge Telstra to pass this post to their development team for consideration, because as it stands the only way for people to get QoS is to buy other non-Telstra modem routers. I can still probably plug Telstras Gateway Max into another modem router that does support QoS which is what I intend to do to solve the problem, but if they could look at addressing this issue the Gateway Max would be a very ideal, very professional modem router that I could recommend to everybody and not bother with the hassle of buying other non-Telstra modem routers.

    Telstra Air has built in QoS, there is a specific speed threshold that they can't pass. If your internet speed is too low it won't allow allow fast access to clients.
    The real truth is all those features are available on your modem but have been disabled by Telstra's firmware, Telstra wants to manage all of these areas so sadly there is nothing we can do

  • QUALITY MANAGEMENT INFORMATION SYSTEM

    hello guru
    kindly explain  what is quality management information system.
    i will be really thankful if u can send me the detail step by step procedure along with t codes
    thank u
    [email protected]

    NITHIYASEELAN ,
    QMIS is basically deals with kind/types/ of data updation that takes place in the system
    Pls go through these links for detailed understanding
    http://help.sap.com/erp2005_ehp_02/helpdata/en/8c/fd5872a94711d1890a0000e8322f70/frameset.htm
    Reward points if useful
    Regards,
    SVP

  • Quality Management - Removing old agents

    Hi all,
    Having an issue with Quality Management. Is it possible to remove to remove an agent that is no longer active from the Quality Management system? I notice that the admin docs for QM say that once an agent has been configured they can't be removed, just unlicenced. The problem we have is the reports in Quality Management Desktop still list this agent. The agent in question has been removed everywhere else in the system (CUCM, UCCX etc) but is still appearing in QM. Is this the expected behavior, or are we doomed to have an ever increasing list of inactive agents?
    Thanks in advance,
    Jason

    Hi
    Well - the recordings are uploaded on a schedule, yes... the schedule basically says 'at off peak hours, that I have defined, upload at a high rate', and 'during peak hours that I have defined, upload at a limited number of recordings per hour'.
    There's no guarantee that the upload won't overload your agents' web connection while it is uploading, even though there will be fewer uploads per hour.
    In theory you could disable in-hours uploading and rely on out-of-hours/off peak times to get the recordings uploaded. However it would be difficult to enforce that people at home will leave their PCs running and connected in the evening to upload the recordings.
    In terms of support; the manual for 2.7 suggests VPN software clients are not supported:
    Remote Agent RequirementsAgents who do not work onsite are supported in these situations:■They connect to the network via a Cisco 831 or 871 router and use a supported IP phone.
    In previous versions (pre 2.6), IP Communictor was not supported for remote workers.
    Finally, if you do go down this route there are no guarantees that you will get good service/voice quality. You will probably be at the mercy of as many different ISPs as agents, and that's not a position I'd want to be in as either you or one of your contact center customers...
    Regards
    Aaron
    Please rate helpful posts...

  • Quality Management: Check Massage on entering Dynmaic Modification Rule

    Hi,
    I'm trying to enter 'Dynamic Modification Rule'.(TrCD: QDR1)
    I found somthing to work out.
    Do anyone have a hint on this?
    In the screen of 'Insspection Stages', I entered some data and clicked 'Save', the following massages appeared.
    "Either enter an inspection severity or set the skip indicator
    Message no. QD505
    Diagnosis
    For an inspection stage you either assign an inspection severity or set the skip indicator.
    You can only assign inspection severities that have been defined as permitted inspection severities in Customizing."
    So, I checked this IMG setting;
      IMG Menu
      > Quality Management > Quality Planning > Basic Data
      > Sample, SPC > Define Inspection Severities
    But, setting there was the same data I entered on the QDR1.
    The 'Inspection Severities' data I set was these;
       1     Inspection without sampling scheme
       2     Reduced inspection
       4     Normal inspection
       6     Tightened inspection
    Regards,
    Katsumi Makabe

    Hi
    Please check again following in inspection stage
    Example skip at every 5 bacthes
    Stage Insp Sev  Skip   1st    Short text    Stag Cha    No
    10      4               X    Start          X            1
    20               X           Skip           X           4
    regards
    Srinivas

  • Create Quality Management view for a Material in background mode

    I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
    The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
    I want to create inspection setup for a material which does not have QM tab.
    I have to create everything is background mode. BDC is one option which I am list interested in.
    Thank you for helping in advance.

    Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.

  • Quality Management During Goods Receipt (Inspection Lot)

    Hi all,
    >>>>>>>>>>>>
    REQUIREMENT
    <<<<<<<<<<<<
    I have a requirement that i need to write an interface program which will receive a file from external agency (manufacturer) and process goods receipt until inspection results. The following steps need to be taken care of;
    1) Create a equipment (Utilities - It is an unique identifier for each unit of the material).
    2) Do Goods Receipt for the PO with the equipment numbers created.
    3) Create Inspection Lot for the material document created during the GR for each equipment number.
    4) Execute Inspection Result.
    >>>>>>>>>>>>
    INFO NOW
    <<<<<<<<<<<<
    Inspection lot can be created from MIGO directly by SPRO config and MM master data maintenance.
    >>>>>>>>>>>>
    DONE
    <<<<<<<<<<<<
    Called BAPI to create Equipment.
    Called BAPI to create Goods Receipt.
    Inspection Lot Settings to create lots during MIGO
    1) New Inspection Type Created as SG1 at SPRO->QM->Quality Inspection->Inspection Lot Creation->Maintain Inspection types. The maintenance is a copy of type 01.
    2) Assign Inspection Type to Lot Origin at SPRO->QM->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection Types. SG1 is maintained against lot origin 01 with variant 01.
    3) Set Default values for SG1 at SPRO->QM->Quality Inspection->Inspection Lot Creation->Define Default Values for Inspection Type with parameters same as for 01.
    4) In Material master for the record set the inspection setup in the quality management tab. put SG1 as active and preferred. Also set Post to insp Stock, Insp with task list, Auto Assign, Skips allowed, Serial Numbers poss, Control Insp lot as For each Material Doc Item.
    I have to kow how to select the Inspection Plan for the lot and thus set the status of lot to released and get it ready for results.
    I also have BAPI ready for Inspection Result.
    >>>>>>>>>>>>
    TESTING
    <<<<<<<<<<<<
    I have tested it and was working fine till last thursday. I have the above mentioned settings even now in the system. Can there be anything else which the functional consultants would have change that affected the process. Anyways now the inspection lot is not getting created for the Inspection during MIGO and I am really struggling to find the exact reason.
    For your info, I am working mostly on Utilities and so do not have much idea about the quality management stuff.
    >>>>>>>>>>>>
    QUESTION
    <<<<<<<<<<<<
    Why the inspection lot is not getting created during MIGO for my scenarion?
    How to select the inspection plan in the program?

    deleted

  • Inspection setup in view quality management update in material master

    Hi all,
    We are using BAPI_MATERIAL_SAVEDATA for our material master updation.
    Here one  of the change in the program is to update the inspection setup in the view quality management.
    Can anybody tell in which stucture of the bapi BAPI_MATERIAL_SAVEDATA  i can pass the values of the inspection set up fields.If not is there any other bapi through which can be done?
    Thanks in advance.
    regards
    Nazmul

    Hi,
    To deactivate the Inspection Types for materials, you can use transaction QA08.
    Here use tab "Deactivate insp. type" and specify the inspection type which you want to dactivate.

  • Licensing Issue Quality Management 9.0 with UCCX 8.5

    Hi guys,
    The UCCX compatibility matrix, Cisco WFO System config Guide plus QM 9.0 installation guide all state QM9.0 is compatible with UCCX 8.5(SU3).
    We have ordered QM9.0 licenses using part number
    L-CCX-90-QM-L-K9=:L-CCX-90-QM-L-K9= : CCX 9.0 Quality Manager Server , 10 Seats LICENSE ONLY
    I am unable to add these licenses to our UCCX server as I am getting:
    Error: The Cisco Unified CCX Quality Manager Seat feature (2nd line) of xxxxx.lic has unsupported version number (9.0)
    Has anyone installed QM9.0 with UCCX 8.5 and if so what licenses did you have to purchase?
    Thanks!

    I have not done this yet, I was looking into getting the license to do same you are doing.  Thanks for the heads up. I will wait to see outcome of your attempt.
    My main drive to go to 9.x is to get IE9 32 bit support with the latest 9.x SR as I have a handful of supervisors who have Windows 7 and using it to play back recordings, etc and I'm tired of the compatibility issues and time spent on their PCs to keep it running after they do other updates, etc.  Was hoping 9.x with the IE9 and 32 bit support would help with those headaches.

  • Quality Management v9 - Recording file is .spx and size of 0 kb

    Guys,
    I have theses versions here :
    CUCM v9.1.2
    Quality management 9.0.1.57
    UCCX 9.0.2.11001-24
    Desktop are connected on the PC port of the phone !
    I want to do the desktop recording and I have an issue where the storage location contains only .spx files that are empty with 0 bytes.
    Here is the troubleshoot I did :
    From the Recording interface I can see all the conversation but I can't play it.
    If I use wireshark I can see the RTP on the destop, I can convert it and listen that RTP stream..so the stream is going to PC
    If I run the QMDump on the desktop of the agent I see the G711 Ulaw which is good but I can't find Skinny hearts beats ( logs of QMdump Attatch ).. I rebooted the phone but still..
    I see on the troubleshooting guide, that this situation could be during the conversion process, it says we need to get logs and escalate the case.
    Anyone have a suggestion ?

    Mary,
    this issue pertains to either not receiving a SIP invite to start recording, or not receiving the actual RTP from the phone.  More than likely it is not receiving a SIP invite.  Check the (WFO 9.0 "Recordserver.dbg") or (WFO 10.0 "Ctiservice.dbg") logs , look for INVITE, it should tell you if you received it or not.
    Example of a good SIP invite:
    SIP: IN|INVITE sip:[email protected]:5060 SIP/2.0|6156255c|10.192.252.36:32880->10.32.2.66:5060|Call-ID: [email protected]|From:
    Example of a BAD SIP response:
    type=Network Recording,person=140]] call CiscoCall[Call[2:20211600];ConnectionId=31651532] should have received SIP but didn't!
    If you are getting a SIP invite, then check the ports between Phone and Recordserver to ensure RTP can get through.
    If you are NOT getting a SIP invite, check your CUCM configuration for Recording:
    here is a link to guide you.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/cmfsgd601/fsmr.html#wp1047595

  • Is Quality management module required to be used for vendor evaluation?

    Hi,
    There is vendor evaluation functionality in MM. Is use of quality management module is mandatory for this? I wish to track the performance of vendor regarding quality (How much he has supplied, out of which how many are accepted and how many are rejected). Can I get this report without using QM?
    Thanks in advance,
    Satish

    you can enter Quality results manually in vendor evealuation, so QM is not necessary for this, however with QM you can get the scores semi-automatic and  automatically.

  • Function module for Mass uploadnotifications in Quality Management

    Hi  Experts,
    I need function module for quality management which MASS UPLOAD THE QM NOTIFICATIONS.
    Thanks

    Hi,
    For updation use BAPI_QUALNOT_ADD_DATA.
    Hope it helps.
    Regards
    Hiren K.Chitalia

Maybe you are looking for