Basic query about Environment

Hi all,
I've been reading Martin Sitter's Logic Pro 7 book and had been finding it very helpful until it got to the Environment chapter, which is actually the reason I got it, that's the most difficult part of the program for me.
When it comes to the Customising your setup, all is well until it comes to "Creating a Multi Instrument. At this point he goes off on a tangential example setting up the internal QT Synth, while I am trying to set up a Roland keyboard as my controller.
For instance, he is working in a QT Synth Layer, I want to work in a MIDI Inst Layer. No problem, but he plugs his Multi Inst into the QT Synth Object which is accessed through the menu. What should the Roland Multi Inst plug into, and where do i find it?
Also, when i open the default templates, ther's an icon named "to Recording and Through". where does that come from.
It may be that the system's not configured correctly. Even on the QT synth, I can only get sound out of about half the channels. But I need a bit of guidance to know where to look. I've been going through Chapter 11for days now.
Thanks in advance.

Hi Lindsay
The quicktime synth works like all multitimbral virtual instruments. in order to access all 16 midi channels a multi instrument needs to be assigned to it
your outboard synths work differently than internal VI’s. After you create your multi for your Roland synth, you do not have to cable it to anything inside Logic, you just have to assign it to the proper midi output port that the synth is connected to on your midi interface. that is done in the parameters box on the left hand side if the environment window
in your clicks and ports layer you have your physical input, which represents any and all midi interface’s connected to your mac. then that is cabled to your sequencer input (record & thru) which sends that incoming midi signal to any record enabled midi track. and of course that midi channel will send the midi info “thru” back to whatever synth it is assigned to.
to break it down:
plug a midi cable from the midi out of your Roland synth to the input of your midi interface
that signal goes thru the physical input and is routed to the sequencer input (record & thru) which sends that signal to any record enabled track
assign one of the midi channels of your Roland multi to a track, it will record enable automatically
one thing to remember is, if you are using the same keyboard as a controller and a sound source at the same time you will want to turn “Local off” on that keyboard

Similar Messages

Basic Query on CQ 5

Hi,
I have a basic query about CQ5 ,actually i will be getting training on it ,i have the following doubts:-
1)I am a beginner in JAva and related technologies,does one need to be an expert in java to understand CQ5?
2)I have mainly worked on Teamsite CMS before,how easy is it for someone from that background to adapt to DAY CQ/
I can go through all the java concepts which are mandatory in CQ5 understanding,please guide regarding them.
Looking forward for expert guidance.
Regards,
Raul

Hi Raul,
Here's my 2 cents:
1)I am a beginner in JAva and related technologies,does one need to be an expert in java to understand CQ5?
No - and - depends. CQ is an enterprise level CMS. As such, it has many many bits and bobs. There is a back-end Java element, a front-end JavaScript/ExtJS element, and a bunch of stuff between the two (sling, crx, osgi, etc.). My best recommendation would be get on a project with a skilled architect in which you are being given components or other parts/pieces to work on. That will give you hands on guidance on building CQ and direct access to seeing an entire project go up from soup-to-nuts. Also, if you haven't already, try to get to an Adobe CQ Dev training class. That will really help jump start your knowledge and get you off on the right foot.
2)I have mainly worked on Teamsite CMS before,how easy is it for someone from that background to adapt to DAY CQ/
Any previous CMS knowledge is definintely helpful. Teamsite is VERY different to CQ. However, the goal is the same. Content authors need a way of entering content that ultimately gets displayed and served up as a web page. Teamsite does this with forms whereas CQ does this more inline on the page... If you've ever worked with Teamsite Sitepublisher, that's even better. Either way, having CMS experience is definitely helpful.
Todd

Basic questation about collation

HI all,
I have basic questation about create colletion . I want read and compare value from enviromnemt variables . But in the query i find "select * from SMS_R_System inner join SMS_G_System_ENVIRONMENT on SMS_G_System_ENVIRONMENT.ResourceId =
SMS_R_System.ResourceId where SMS_G_System_ENVIRONMENT.VariableValue = xzy " But where is the name for this value . I want etc. variable name PUBLIC value = "c:\public"
thanx
Falcon

OK, I think I follow now:
SELECT SMS_G_System_ENVIRONMENT.ResourceId
FROM SMS_G_System_ENVIRONMENT
WHERE SMS_G_System_ENVIRONMENT.Name = "FP_NO_HOST_CHECK"
AND SMS_G_System_ENVIRONMENT.VariableValue = "Yes"
Jason | http://blog.configmgrftw.com

Basic questation about VSS and windows backup

hi all, basic questation about backup and VSS
Environment:
windows 2008r2,NAS backup disk connected with iSCSI
If i create in the windows backup server job , where i backup disk D , target is NAS disk and start it . Windows backup is requester and is created shadow copy . This shadow copy is created in the disk D or in the NAS disk ? If in the disk D is created for
everyone application snapshot ? After created snapshot the windows backup copy data from snapshot to windowsimagebackup ? And If windows backup create different snapshot how detect which files is changed ?
thank you
Falcon

Hi,
Windows Server Backup stores backup versions in volume shadow copies. After the data write is complete, Windows Server Backup creates a shadow copy of the volume where the backup is stored using Volume Shadow Copy Service (VSS). This shadow copy retains the
state of the storage volume as a “backup version” or “point-in-time” of the backup and must restore using this backup version.
You could refer to the article below to know the steps of a back up operation performs:
Backup Version and Space Management in Windows Server Backup
http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx
Windows Server Backup uses Volume Shadow Copy Service (VSS) and block-level backup technology to back up and recover your operating system, files and folders, and volumes. The Volume Shadow Copy Service is used to differentiate between backup sets, and to track
where the various blocks are being written to within the shadow copy storage.
For more information about the incremental backup technology, please see:
Learn more about system image backup
http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx
Backup and Recovery Issues with Windows Server 2008 (Part 2)
http://www.windowsnetworking.com/articles-tutorials/windows-server-2008/Backup-Recovery-Issues-Windows-Server-2008-Part2.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Basic Query Creation

Hello,
Our company is about to go live with B1 and E commerce. We are very much looking forward to getting the ball rolling: the old MOM system and Sitelink shopping cart is causing issues!
Anyway, before i go too much further i would like to get hold of some basic Query creation documentation. So far i have been unable to find any.
If i have posted this in the wrong discussion group i apologies.
I look forward to hearing your comments and becoming a regular in this group,
Thanks,
Charlie

Hi Charlie,
Beside this forum, you may also search and post here:
SAP Add-Ons
Thanks,
Gordon

Urgent query about copying array of objects to html item

I have an urgent query about how I can display an array of objects on a html form. The only suitable html item I can see for this is a drop down box. Ideally a combo box would be preferable but I cant find anything like this. Basically the display item needs to contain 3 columns of data and has to display a number of rows. Can anyone tell me how to copy the array of values into a drop down box?

Here is all the code from my jsp. It keeps returning null:
<%@ page language="java" %>
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<%@ page import="java.util.*, java.lang.*" %>
<html:html locale="true">
<head>
<meta HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=windows-1252"/>
<link rel="stylesheet" type="text/css" name="timesheet" href="stylesheets/timesheet.css"></link>
<script type="text/javascript" language="javascript" src="javascript/sum.js"></script>
<title><bean:message key="eng.title"/></title>
<html:base/>
</head>
<body bgcolor="white">
<table border="0" width="100%">
<tr>
<td width="30%"><html:img page="/images/PwC_logo.gif"/></td>
<td width="40%" class="applicationTitleCell">
<div align="center">
<bean:message key="application.title"/>
</div>
</td>
<td width="30%"> </td>
</tr>
</table>
<center>
<html:form action="/selectEng" focus="engSearchNumber">
<table border="0" width="100%">
<tr>
<td width="30%"></td>
<td width="20%" align="center"> <b> <bean:message key="eng.prompt.engSearchNumber"/> </b> </td>
<td width="20%" align="center"> <b> <bean:message key="eng.prompt.clientSearchName"/> </b> </td>
<td width="40%"> </td>
</tr>
<tr>
<td width="30%"></td>
<td width="20%" align="center"> <html:text property="engSearchNumber" size="20" maxlength="9" onchange='<%= "SearchLength(this)" %>' onkeypress="return NumberOnly()" /> </td>
<td width="20%" align="center"> <html:text property="clientSearchName" size="20" maxlength="20" onchange='<%= "SearchLength(this)" %>'/> </td>
<td width="30%"> </td>
</tr>
</table>
<table border="0" width="100%">
<tr>
<td width="30%"></td>
<td width="40%" align="center"><html:image property="findButton" src="images/Find.gif" alt="Find"/></td>
<td width="30%"> </td>
</tr>
<jsp:useBean id="selectEngForm" scope="session" class="Time.SelectEngForm" />
<% if (selectEngForm.getEngSearchNumber() != null) { %>
<tr>
<td width="30%"></td>
<td width="40%" align="center"><select name="engListing" size="5">
<%= selectEngForm.getEngListing() %>
</select></td>
<td width="30%"> </td>
</tr>
<% } else if (selectEngForm.getClientSearchName()!=null){ %>
<tr>
<td width="30%"></td>
<td width="40%" align="center"><select name="engListing" size="5">
<%= selectEngForm.getEngListing()%>
</select></td>
<td width="30%"> </td>
</tr>
<% } %>
<%=request.getParameter("engListing")%>
</table>
<br><br>
<table border="0" width="100%">
<tr>
<td width="30%"></td>
<td width="11%" align="center"> <html:image property="addButton" src="images/Add.gif" alt="Add the selected engagement to the timesheet"/> </td>
<td width="11%" align="center"> <html:image property="cancelButton" src="images/Cancel.gif" alt="Cancel"/> </td>
<td width="30%"> </td>
</tr>
</table>
</html:form>
</center>
<br>
<center><html:link forward="timesheet"> <html:img src="images/Back.gif" border="0"/> </html:link></center>
</body>
</html:html>

Basic info about POWA?

Hi Friends
Please let me know some basic info about POWA
Regards
Simha

Hi,
There is no transaction with POWA.. Let me know what it is POWA
Following are few tcode's which starts with POW*
POWL_CAT             Maintain POWL categories
POWL_QUERY           Maintain POWL Query definition
POWL_QUERYR          Maintain POWL Query role assignment
POWL_QUERYU          Maintain POWL Query user assignment
POWL_TYPE            Maintain POWL Type definition
POWL_TYPER           Maintain POWL Type role assignment
POWL_TYPEU           Maintain POWL Type user assignment
Thanks
prasad.s

Basic query in Oracle Spatial

I'm trying to learn Oracle Spatial working with 11g R2 and with 3D georeferenced data (specifically data describing buildings in a city).
But I'm having trouble getting a basic query to work on my dataset (it works for the book example), and I'm trying to do it exactly the way it's done in the Spatial Developer's Guide for 11g.
To learn how spatial queries work, I set up the cola_markets tables used in the book, made the appropriate manual entry in the user_sdo_geom_metadata view and created the index. Having done that, I can run the following simple query (as well as the others in the manual) on the book tables:
SELECT SDO_GEOM.SDO_DISTANCE(c_b.shape, c_d.shape, 0.005)
FROM cola_markets c_b, cola_markets c_d
WHERE c_b.name = 'cola_b' AND c_d.name = 'cola_d';
but when I try to do the same thing on my own tables (created from citygml data), I get an error. There is the difference that the data is 3D, and the index was created without any PARAMETERS ( ... ), hence is just 2D. But still I don't get why the following query doesn't work:
SELECT SDO_GEOM.SDO_DISTANCE(c_w.envelope, c_b.envelope, 0.0005)
FROM cityobject c_w,
     cityobject c_b
WHERE c_w.id = 50025
     AND c_b.id = 50018;
The id's for the buildings are valid, and I used the same tolerance used by the software that set up the database.
Here's the error I get in SQL developer:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.Exception: 54535
ORA-06512: at "MDSYS.SDO_3GL", line 637
ORA-06512: at "MDSYS.SDO_GEOM", line 1973
ORA-06512: at "MDSYS.SDO_GEOM", line 1990
29532. 00000 - "Java call terminated by uncaught Java exception: %s"
*Cause: A Java exception or error was signaled and could not be
     resolved by the Java code.
*Action: Modify Java code, if this behavior is not intended.
So, thinking it might have something to do with the fact that it's a Java interface, I also tried running it from SQL/PL command line and get essentially the same thing:
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.Exception: 54535
ORA-06512: at "MDSYS.SDO_3GL", line 637
ORA-06512: at "MDSYS.SDO_GEOM", line 1973
ORA-06512: at "MDSYS.SDO_GEOM", line 1990
Any ideas why this isn't working?
(P.S.: I couldn't find a specific board for Oracle Spatial, hence put this question here--if there's a better place for this question, then, admins, of course, feel free to move the thread to the appropriate spot)

Hi,
The SPATIAL forum is here : {forum:id=76}

Basic questions about Infocube

Hi, everyone.
I got very basic questions about infocube data handling.
With infopackage, I extracted all the data about employees from R/3.
But there were some mistakes during inputting employee data, like positions,
so I just extracted those employees data once more.
Now I have two requests in infocube, where the first one has some wrong data.
Is there any solutions about this?
I might got it all wrong, so as beginner, any suggestions and explanations will
be grateful.

Hi,
You can manually delete the earlier request by going in the Manage option of the cube. select the request and click on delete icon at the bottom.
Other option is to make setting in the Infopackage to delete similar or overlapping request.
Data target tab --> 6th column Automatic loading / deletion of similar request. --> click on the blank icon --> you will get a pop-up --> select the radio button - "delete existing request" --> Select Conditions --> Infosource are same, datasource are same and source system are same, --> selections are "Same or More Comprehensive "
Assign points if useful
Regards
Venkata Devaraj !!!

Basic Questions About Compiling Source

Hi!
I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/ - and during the install process, everything will be installed in its proper dir, right?
How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
Once you do figure out which compiler to run, the process is supposed to go like this, right?
./configure
make (or whatever)
make install
But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
$ ls ~/Downloads/arm
ChangeLog
README
armrc.sample
setup.py
LICENSE
arm
install
/src
Maybe it's that 'setup.py' file? What are you supposed to do?
Of course, it's not only this one that's given me trouble. Sometimes the readme will say I have to edit a certain file for my system. Are there just a few standard changes you always make? Or is it...how can I put it...complicated? How do you find out what's needed in those cases?
OS 10.6.8
Xcode 3.2.4
Python 2.7

sudont wrote:
I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
This is the place for UNIX discussions. If you have developer-related questions, there is a forum dedicated to that as well: Developer Forums
First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/ - and during the install process, everything will be installed in its proper dir, right?
Yes. Hopefully the project you want to install follows standard conventions. If so, you can do "./configure", then "make", and finally "sudo make install" to install the software into "/usr/local".
How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
The make file will figure that stuff out.
Once you do figure out which compiler to run, the process is supposed to go like this, right?
./configure
make (or whatever)
make install
Yes, with the addition of "sudo" before "make install" because "/usr/local" is owned by root.
But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
$ ls ~/Downloads/arm
ChangeLog
README
armrc.sample
setup.py
LICENSE
arm
install
/src
arm? You mean "arm (anonymizing relay monitor) - Terminal status monitor for Tor relays." You really don't want to be messing with that stuff. The only people involved with Tor that are trustworthy are US Navy intelligence who have their own uses for it. If you don't understand it as well as they do, best stay away.

Basic questions about macbook pro + external monitor

Hi,
I have some very basic questions about using a Macbook Pro + external display. I don't actually have them but need to know how things works.
So, here they are:
1) Can I use the external display as the main display?
2) Will the external display run with its resolution or with that of the mbook pro?
3) Somewhere I read that you cannot keep the macbook pro open and get the full resolution of the external display. Is that true ?
4) Is it dangerous to keep the mbook closed while using the external display?
5) Does the usage of the external display impact on mbook performance?
I know...a lot of questions , but would be nice if someone could help me.
Thanks.

Hi - I am presently using an external display.
To answer your questions in sequence:
1. Yes you can use the external display as your main display. The way to enable that mode is to put your MacBook Pro to sleep, attach the external display. Wake up your MBPro with the lid closed and you will see the external display as you main display. You can alternatively set the external to "Mirror" your notebook by using preferences/display.
2. The external display will run at its resolution although you can adjust and calibrate it using Preferences/Display.
3. Not true. You get max resolution on both displays. Of course you may have to tweak as mentioned above.
4. Not at all. I use this mode all the time. Just make sure you initially set up as mentioned above and your LCD on the MBPro will stay off.
5. I have not seen any performance degradation whatsoever.
Hope this helps.

Basic question about Flash video. Please Help

Hello,
Sorry for the noob question but I'm struggling with the basic
understanding about the Flash video.
I just need to reduce a large video file to a small size with
a nice quality and the Flash Video Encoder does very god job with
that. But when I double click the compressed .flv file it opens as
a blank screen in the stand alone player without playing any video.
I can use Dreamweaver to produce a web page playing the file, but I
don't need this file for posting it on a web page, I just want the
file smaller and to simply play it on my computer or send it to
others.
What is the way to do this?
I appreciate your help.

It sounds like you're not having problems with the actual
compression of the videos, just the playback, correct? All you need
is a standalone player that plays FLVs. Like Quicktime Player plays
MOVs, and Windows Media Player plays WMVs, you need something to
play the FLV files. There are many free options available. On a
mac, I use something called, strangely enough, SWF & FLV
Player. You can find it here:
http://mac.eltima.com/freeflashplayer.html
Just do a search for FLV players and you should find
something appropriate. The only downside is you'll need to make
sure anyone you're distributing the videos to also has an FLV
player. If you're sending your files to just a few people, no big
deal. If this is for the public in general, you would want to embed
a Flash video player in an HTML page and send it like that.
Hope that helps.

Basic question - Problems with basic query - Mask = INSIDE

Greetings,
I'm doing a basic query on Oracle 10g Spatial, is to determine the intersection between two layers (one point called "Calidad1") and other polygons, called "Parishes")
For issuing the following query based on the documentation of oracle:
"select C1.ID, C1.SECUENCIA,
P. COD_ENTIDAD, P. STATE
Cod_county P., P. TOWNSHIP,
P. COD_PARROQUIA, P. PARISH
from CALIDAD1 c1,
PARISHES p
where sdo_relate (c1.geoloc, p.geoloc, 'mask = INSIDE querytype = WINDOW') = 'TRUE'
order by C1.ID;
When I run the query, no errors but extends too long (more than 10 minutes) and no end, I have to cancel.
Canceling shows me the following error:
"ORA-13268: error obtaining dimension from USER_SDO_GEOM_METADATA
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 8
ORA-06512: at "MDSYS.SDO_3GL", line 89 "
This query is very basic and the data volume is small, a conclusion: I must be skipping a step or activity.
Can you guide a little to resolve this situation and get the query that I need?
Thanks to all

First, try this query with the ordered hint and also note the change in the FROM clause.
select /*+ ordered */ C1.ID, C1.SECUENCIA,
P. COD_ENTIDAD, P. STATE
Cod_county P., P. TOWNSHIP,
P. COD_PARROQUIA, P. PARISH
from PARISHES p,
CALIDAD1 c1,
where sdo_relate (c1.geoloc, p.geoloc, 'mask = INSIDE querytype = WINDOW') = 'TRUE'
order by C1.ID;
See if this is using the index as expected. If not try this:
select /*+ ordered index(p name_of_the_spatial_index_on_the_PARISH_Table) */
C1.ID, C1.SECUENCIA,
P. COD_ENTIDAD, P. STATE
Cod_county P., P. TOWNSHIP,
P. COD_PARROQUIA, P. PARISH
from PARISHES p,
CALIDAD1 c1,
where sdo_relate (c1.geoloc, p.geoloc, 'mask = INSIDE querytype = WINDOW') = 'TRUE'
order by C1.ID;
siva

Query about local storage

Hi,
     i had a query about local storage.
     I've a machine that hosts weblogic and tangosol. i've an ejb that accesses a distributed cache i.e NamedCache cache = CacheFactory.get("MyCache")
     i modified tangosol-coherence.xml and set local-storage to false ( for distributed cache) and replaced the file in coherence.jar.
     i'm using an overflow scheme and the back map uses a disk scheme.
     i also start a separate standalone instance of tangosol and i set the system property of local storage to true for the standalone instance.
     i start the standalone instance first and then weblogic.
     The idea is ensure that the tangosol instance in weblogic or the weblogic JVM should not participate in storing data (hence local storage false).
     only the JVM for the standalone instance should store data (hence local storage true -system property).
     i wanted to know whether the property "local-storage" is pertinent to a member(machine) or to a JVM?
     the reason for this doubt: as i'm using a disk scheme, tangosol creates a file for an overflow (e.g lh014402~.tp). i can see two such files when ideally i would have wanted only one for the tangosol instance.
     -rw-r--r-- 1 zephyr users 8364032 2005-06-23 17:02 lh014402~.tp
     -rw-r--r-- 1 zephyr users 8364032 2005-06-23 17:02 lh014403~.tp.
     can you please let me know if we can configure tangosol in such a way that we can two separate instances running with local stroage false for one and true for the other?
     Awaiting your reply
     Thanks
     Vinay

I would suggest leaving the default 'local-storage' value set to 'true' in the tangosol-coherence.xml and just use the JVM argument to control the local storage of each individual node. Then start the stand alone instance normally (I assume you are using the com.tangosol.net.DefaultCacheServer) and start the WebLogic instance with the following:
     java [...] -Dtangosol.coherence.distributed.localstorage=false [...]
     Hope this helps.
     Later,
     Rob Misek
     Tangosol, Inc.

Basic questions about CISCO IOS

Hi everybody, Jack here,
I have some basic questions about the Cisco IOS, could someone help me addressing some of them please? Any feedback would be greatly appreciated.
Basically, I have two IP addresses assigned by our Cable ISP. From what I understood you can configure a Cisco router for multiple IP addresses using the IOS, thereby allowing someone like myself to take advantage of having multiple IP addresses. This may seem unnecessary to some, but I've always wanted to put the 2nd IP address to use, since after all, I've been paying for it.
I was just wondering if someone could confirm that what I'm hoping to accomplish is indeed within the capability of the Cisco IOS (i.e. Fully utilize my 2 IP addresses). As well, if someone could kindly suggest a decent CISCO router for online gaming home use that would be super awesome!
Thank you all so much for reading through the wall of text:)
Jack

Jack
Certainly using multiple IP addresses is in the capability of Cisco IOS routers. How they can be used depends on the relationship of the IP addresses. I am assuming that we are talking about IP addresses assigned for the user to use and that the IP address for the ISP connection is not one of these that we are talking about.
If both of the IP addresses that you have been assigned are within the same subnet then you would assign one of the addresses to the router interface to establish IP communication between the router and the ISP and to enable Internet connectivity for the devices inside your network that will use the router as their gateway to the Internet. The other address that is assigned can be used for address translation and in particular for static address translation which would make one of your devices inside to be reachable for connections initiated from the Internet (if that is something that you might want to do).
If the addresses that are assigned to you are in different subnets then you could assign one address to the outside router interface and assign the other address to the router inside interface. Or you could use the second address for address translation.
I do not have much expertise with online gaming, but I would think that either the Cisco 881 router or the 890 router might be appropriate for you. If 100 Mb connection is sufficient then probably the 881 would be the one to look at. If you need Gig connection then look at the 890.
HTH
Rick

Basic query about Environment

Similar Messages

Maybe you are looking for