Basic questation

HI ,
I have 2 basic questation about adobe premiere element 7 . Can I intergarte 2 clips to one clips ? And can I cahnge speed of the clip with the keyframe ? I wan in the begin clip slow and accelerate .....
thanx

Marek,
To elaborate on what Steve says in Post 10, what you have on your Timeline is a pair "virtual" Clips. They appear as separate on the Timeline only, but Premiere is referencing back to your original Clip, which is in your Project Panel. It has not been physically cut, but has just had references added to it for editing.
When you Delete the second Clip, the one you "created," and drag the end of the first Clip back out, you are just erasing those references. Your Clip is essentially now unchanged.
The Undo (Ctrl-z) works while you are editing. If you Save your Project and close it, you cannot use the Undo. You can also use your History Palette (Window>History) to have multiple Undo's. These also disappear when you Save and Close, then reopen PE.
Hunt

Similar Messages

Basic questation about collation

HI all,
I have basic questation about create colletion . I want read and compare value from enviromnemt variables . But in the query i find "select * from SMS_R_System inner join SMS_G_System_ENVIRONMENT on SMS_G_System_ENVIRONMENT.ResourceId =
SMS_R_System.ResourceId where SMS_G_System_ENVIRONMENT.VariableValue = xzy " But where is the name for this value . I want etc. variable name PUBLIC value = "c:\public"
thanx
Falcon

OK, I think I follow now:
SELECT SMS_G_System_ENVIRONMENT.ResourceId
FROM SMS_G_System_ENVIRONMENT
WHERE SMS_G_System_ENVIRONMENT.Name = "FP_NO_HOST_CHECK"
AND SMS_G_System_ENVIRONMENT.VariableValue = "Yes"
Jason | http://blog.configmgrftw.com

Basic questation about MBAM

HI all , sorry for basic questation .
I try set with gpo mbam client in the windows 7 . I set requerid encrypt os drive and fixed drivers .and questtaion :
in the error log is write :
detect OS volume encryption policies conflict . check bitlocker anb MBAM policies related OS drive protectors .
I set MBAM only in MBAM GPO .
an second quetstaion .
I cannot enable bitlocker only with GPO ? I must enable manualy ?
thanx
Falcon

Recovery key and the PIN are two different protectors. PIN is something you set to unlock your machine at boot. It provides an additional protection. You can always change the PIN choosing option, bitlocker drive encryption option from control panel.
Recovery key is to log in the machine if your machine goes into the recovery mode. If you will not be able to access your OS Drive how you will be able to boot. TPM string is called as the Ownership Hash password which is different from the recovery string
of the OS Drive which is a 48 digit numerical password.
Gaurav Ranjan

Basic questation about backup SQL database

Hi I have basic questation about backup database . If I set DPM to backup database and the database have full model and another application truncate log. Detect this dpm and create full backup or create error ?
Falcon

Hi,
If you want another backup process to truncate the logs instead of DPM, you can just configure DPM to synchronize
just before a recovery point. That basically tells DPM to just perform express full backups which will not truncate logs.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Basic questation about VSS and windows backup

hi all, basic questation about backup and VSS
Environment:
windows 2008r2,NAS backup disk connected with iSCSI
If i create in the windows backup server job , where i backup disk D , target is NAS disk and start it . Windows backup is requester and is created shadow copy . This shadow copy is created in the disk D or in the NAS disk ? If in the disk D is created for
everyone application snapshot ? After created snapshot the windows backup copy data from snapshot to windowsimagebackup ? And If windows backup create different snapshot how detect which files is changed ?
thank you
Falcon

Hi,
Windows Server Backup stores backup versions in volume shadow copies. After the data write is complete, Windows Server Backup creates a shadow copy of the volume where the backup is stored using Volume Shadow Copy Service (VSS). This shadow copy retains the
state of the storage volume as a “backup version” or “point-in-time” of the backup and must restore using this backup version.
You could refer to the article below to know the steps of a back up operation performs:
Backup Version and Space Management in Windows Server Backup
http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx
Windows Server Backup uses Volume Shadow Copy Service (VSS) and block-level backup technology to back up and recover your operating system, files and folders, and volumes. The Volume Shadow Copy Service is used to differentiate between backup sets, and to track
where the various blocks are being written to within the shadow copy storage.
For more information about the incremental backup technology, please see:
Learn more about system image backup
http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx
Backup and Recovery Issues with Windows Server 2008 (Part 2)
http://www.windowsnetworking.com/articles-tutorials/windows-server-2008/Backup-Recovery-Issues-Windows-Server-2008-Part2.html
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Some basic questation about mbam and bitlocker

Sorry for questation . What doing options Auto-unlock ?
allow auto-unlock and require auto-unlock .
and exist some construction betwen setting fixed drive and os drive . If I disable encrypting fixed drive or set only read fixed drive it mean that os drive is set to ?
and about bitocker:
exist solution how i enforce encrypting ?
thank you
Falcon

Recovery key and the PIN are two different protectors. PIN is something you set to unlock your machine at boot. It provides an additional protection. You can always change the PIN choosing option, bitlocker drive encryption option from control panel.
Recovery key is to log in the machine if your machine goes into the recovery mode. If you will not be able to access your OS Drive how you will be able to boot. TPM string is called as the Ownership Hash password which is different from the recovery string
of the OS Drive which is a 48 digit numerical password.
Gaurav Ranjan

Basic questation about how works DPM

HI all,
sorry how DPM detect which files is changed I must copy to replika ? Or how is created replika . DPM also reguester create full backup and then use incremental backup copy-and-write method ?
thanx
Falcon

Closing for housekeeping.
DPM uses a file system filter driver (DPMFilter) to track block level changes between backup times and only transmits changed file blocks during synhronizations for file data. DPM never transfers the whole file except for initial replica
creation.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Basic questation about sql backup

HI all, sorry for my englisch . I have quetstaion about DPM and SQL 2012 database recovery model .
If I select recovery model simple , that DPM always backup full backup ... This create with vss providera ?
If I select full backup what work synchranization ? Every log files is copy to replica , and after copy truncate log ?
thanx
Falcon

For application data that support incremental backups (exchange, SQL Db's in full recovery mode) there are two job types.
A) Synchronization - This is equivalent of an incremental backup and only brings over log changes. Each incremental synchronization is equivalent to a recovery point. Each incremental synchronization results in application log truncation which
is performed by the application (SQL / Exchange)
B) Express full - This is equivalent to FULL backup, however only brings over Database changed blocks and applies them to the replica volume then makes a snapshot Each express full backup is recoverable. Express full backups do not result
in log truncation by the application. There is a 512 snapshot limit for express full backups.
For applications that do not support incremental backups (SharePoint, SQL Db's in simple recovery mode, Hyper-V VMs) always use express full backups.
http://social.technet.microsoft.com/Forums/en-US/b767a3fb-ce59-4599-a92e-2e5e7e1c8b98/help-to-understand-the-difference?forum=dpmfilebackup
Backing up SQL with DPM
SCDPM: Backup SQL and Truncate SQL Logs
Does DPM Clear transaction Log when Backup?
Have a nice day !!!

Questations on BAPI

HI all,
I have some questations on BAPI function modue creation,
1. After creating bapi function module we have to release the
     function module. why should we release the Function
     module ?
2. Creating BAPI object,
    What is API Method ?
    Why should we create the API Method ?
    What is the use of API ?
3. Here also we are doing like
   Object Type Component -> To Implemented.
   Object Type Component -> To Released.
   Object Type -> To Implemented.
   Object Type -> To Released.
   What is the use of this ?
Thanks,
Nagaraju.

Hi,
1.RFC is Remote Function Call - a function module, which can be called remotely from outside
BAPI is also a Remote enabled function module but the difference between BAPI and RFC is in BAPI there is a bussiness object attached to it which calls SAP application internally.
can you explain RFC and BAPI???
The difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
RFC is the protocol used to call functions in an R/3 system by a caller external to R/3 or to call programs external to R/3 from an R/3 system. Functions can only be called via RFC, if they are tagged as RFC functions in the SAP development workbench. They are then called RFC function modules. BAPIs are complete sets of (BAPI) function modules that model a business application.
RFC is the protocol used by SAP for remote communication, that is, for communications between remote independent systems.RFC is used for communications between two independent SAP systems, or for communications between an SAP system and a non-SAP system, such as an external application. It can also be used for communications between modules on the same system.Using the RFC interfaces you can extend the functionality of R/3 applications from an external program.
An R/3 system also contains Business Application Programming Interfaces (also called Business APIs, or BAPIs), which provide a programming interface to business objects. BAPIs are a set of methods for working with and manipulating SAP business objects.Internally, BAPIs are implemented as function modules stored in the R/3 Function Builder. Each BAPI has an equivalent internally-named function module. However, you should use the BAPI and not the function module behind it, because the BAPI provides a stable, object-oriented view of R/3 applications and data. The internal function modules or even the fact that the BAPIs are implemented as function modules are not guaranteed to remain the same in future releases of R/3.
BAPI stands for Business Application Programming Interface.
It is a library of functions that are released to the public
as an interface into an existing SAP system from an external
system.
RFC is the protocol used to call functions in an R/3 system
by a caller external to R/3 or to call programs external to
R/3 from an R/3 system.
Functions can only be called via RFC, if they are tagged as
RFC functions in the SAP development workbench. They are
then called RFC function modules. BAPIs are complete sets of
(BAPI) function modules that model a business application.
When you are familiar with web developments: RFC can be
compared to HTTP and BAPIs are CGI applications.
In other words: A BAPI function is a function module that
can be called remotely using the RFC technology.
RFC and BAPIs are remote enabled function modules. They are practicly the same. A BAPI is one step further as it usually is a self contained business function, such as "Create Purchase Order", or "Change Sales Document". BAPIs interface is very well defined and documented. BAPIs can be found in the BAPI browser via transaction BAPI. RFCs are just remote enabled function modules.
BAPI stands for Business Application Programming Interface. It is a library of functions that are released to the public as an interface into an existing SAP system from an external system.
RFC is the protocol used to call functions in an R/3 system by a caller external to R/3 or to call programs external to R/3 from an R/3 system. Functions can only be called via RFC, if they are tagged as RFC functions in the SAP development workbench.
BAPIs are RFCs, the only difference is that BAPIs usually encapulate some complete business object. For example, creating a sales order, the BAPI would do all of the steps required to create a sales order.
2.Create the API Method Using the BAPI WIZARD
The BAPI wizard is used toTo expose the remote function module as a BAPI. The wizard will generate some additional code, so the function module is a valid method of the BOR. This allows the BAPi to be called as a workflow method in addition to be called by an outside program.
Note: Each function module corresponds to a method in the BOR
Go to the Business Object Builder SWO1.
You can either create the new Object type as a subtype of an existing business object or create a new business object from scratch. In this example it would be obvious to create the Object type as a subtype of BUS2005 Production order. However, to illustrate how to create a new Object type from scratch, we will do this.
In the Object/Interface type field write the name of the new Business Object: ZORDERSTAT. Press enter and fill in the additional fields necessary to create the object type.
Supertype: Not relevant because we are creating our object from scratch
Program. This is the name of the program where the wizard generates code for the Object type, NOT the function module we created earlier. The program name must not be the name of an existing program.
Create the API Method Using the BAPI WIZARD
The BAPI wizard is used toTo expose the remote function module as a BAPI. The wizard will generate some additional code, so the function module is a valid method of the BOR. This allows the BAPi to be called as a workflow method in addition to be called by an outside program.
Note: Each function module corresponds to a method in the BOR
Go to the Business Object Builder SWO1.
You can either create the new Object type as a subtype of an existing business object or create a new business object from scratch. In this example it would be obvious to create the Object type as a subtype of BUS2005 Production order. However, to illustrate how to create a new Object type from scratch, we will do this.
In the Object/Interface type field write the name of the new Business Object: ZORDERSTAT. Press enter and fill in the additional fields necessary to create the object type.
Supertype: Not relevant because we are creating our object from scratch
Program. This is the name of the program where the wizard generates code for the Object type, NOT the function module we created earlier. The program name must not be the name of an existing program.
Create the API Method Using the BAPI WIZARD
The BAPI wizard is used toTo expose the remote function module as a BAPI. The wizard will generate some additional code, so the function module is a valid method of the BOR. This allows the BAPi to be called as a workflow method in addition to be called by an outside program.
Note: Each function module corresponds to a method in the BOR
Go to the Business Object Builder SWO1.
You can either create the new Object type as a subtype of an existing business object or create a new business object from scratch. In this example it would be obvious to create the Object type as a subtype of BUS2005 Production order. However, to illustrate how to create a new Object type from scratch, we will do this.
In the Object/Interface type field write the name of the new Business Object: ZORDERSTAT. Press enter and fill in the additional fields necessary to create the object type.
Supertype: Not relevant because we are creating our object from scratch
Program. This is the name of the program where the wizard generates code for the Object type, NOT the function module we created earlier. The program name must not be the name of an existing program.
After you have finished the wizard, you will notice that the ZGetOrderStatus has been added to the business object:
You can double-click on the method to see its properties. To use the business object you must change the Object type status to Implemented. Use menu Edit->Change releases status->Object type->To implemented. No you can test the object (Press F8).
Note that the BAPI wizard has added a wrapper class for the function module so it can be sued as method in the business object. Choose menu Goto->Program to display the program:
Implementation of object type ZORDERSTAT *****
INCLUDE <OBJECT>.
BEGIN_DATA OBJECT. " Do not change.. DATA is generated
only private members may be inserted into structure private
DATA:
" begin of private,
" to declare private attributes remove comments and
" insert private attributes here ...
" end of private,
KEY LIKE SWOTOBJID-OBJKEY.
END_DATA OBJECT. " Do not change.. DATA is generated
BEGIN_METHOD ZGETORDERSTATUS CHANGING CONTAINER.
DATA:
BAPIORDERSTATUSIMPORT LIKE ZBAPI_ORDER_STATUS_IMPORT,
RETURN LIKE BAPIRETURN,
TBAPISTAT LIKE ZBAPISTAT OCCURS 0.
SWC_GET_ELEMENT CONTAINER 'BapiOrderStatusImport'
BAPIORDERSTATUSIMPORT.
SWC_GET_TABLE CONTAINER 'TBapistat' TBAPISTAT.
CALL FUNCTION 'Z_BAPI_GET_ORDER_STATUS'
EXPORTING
BAPI_ORDER_STATUS_IMPORT = BAPIORDERSTATUSIMPORT
IMPORTING
RETURN = RETURN
TABLES
T_BAPISTAT = TBAPISTAT
EXCEPTIONS
OTHERS = 01.
CASE SY-SUBRC.
WHEN 0. " OK
WHEN OTHERS. " to be implemented
ENDCASE.
SWC_SET_ELEMENT CONTAINER 'Return' RETURN.
SWC_SET_TABLE CONTAINER 'TBapistat' TBAPISTAT.
END_METHOD.
Please check this link.
http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dce68eafc11d18a030000e829fbbd/frameset.htm
Use this its perfect for you
EMIGALL
Regards,
Shiva.

Basic question

Hello, i have a basic question. if i have defined 2 fields in a cube or a dso:
Name Quantity
and from the external flat file i get some characters for my quantity field. would my load fail? for standard dso and for write optimized?
NOTE: quantity field is a keyfigure defined as numeric.
and the load coming in has "VIKPATEL" for Quantity field and not numbers.
thanks

Hi Vik,
Yes, the load will fail.
May be you coud first load this data into BW (into PSA) and set both fields as characters fields. Then you can create DSO, do transformation from this PSA to the DSO, and put your logic as to what do you want to do with those Quantity that is not number (e.g. convert to 0, or 'Not assgined', etc).
You can use transfer rule, or a clean up ABAP code in the start routine.
Hope this helps.

How can I create a video clip that has multiple copies of the same subject playing at the same time? Basically like one person became 50 backup dancers!

Hello Everyone,
I am trying to create a single video clip where my original subject (dancer) is multiplied on the screen many times. Basically I am trying to create a background video for a dance team and want to make it look like an army of the same person dancing behind them. Amy guidance would be great!
Thanks
Madisonman 2013

Motion ($50) can do this with a replicator.
Russ

Type Mismatch error while calling a Java Function from Visual Basic 6.0...

Hi,
I'm having a problem in calling the Java Applet's Function from Visual Basic. First, I'm getting the handle of the Java Applet and components of it using "Document.Applets(n)" which is a HTML function. I'm calling this function from Visual Basic. My code is something like this...
' // Web1 is IE Browser in my Form.
Dim Ap,Comp
Dim Bol as Boolean
Bol = true
Ap = Web1.Document.Applets(0).getWindow() ' \\ Gets the Parent Window.
Ap.setTitle("My Java Applet") ' \\ Sets the Title of the window.
msgbox Ap.getVisibility() ' \\ This will return a Java boolean ( true or false )
Ap.setVisibility(Bol) ' \\ Function Syntax is : void setVisibility(boolean b)
Here in my code , i'm able to call any function that which accepts Integer or String but not boolean. So, i m facing problem with Ap.setVisibility() function. It gives me a "Type mismatch error" while executing it. Can you please tell me a way to do this from Visual Basic !
I'm using Visual Basic 6.0, Windows 2000 , J2SDK 1.4.2_05.
Please help me Friends.
Thanks and Regards,
Srinivas Annam.

Hi
I am not sure about this solution. try this
Declare a variable as variant and store the boolean value in that variable and then use in ur method.
Post ur reply in this forum.
bye for now
sat

Disappointed by missing basic functionality

I recently started working with Muse, and got frustrated by the fact that there seemingly is no Show/Hide functionality.
Also, am I correct to say that there is no direct import for Mp3/4 media? If so, why not?
Lastly: if InDesign can have basic animation options, then surely it wouldn't be so hard to include it in Muse.
Muse works great, but I am quite disappointed by this lack of basic functionality.
Cobus

Thanks for your response.Yes I agree with you - I put my expectations in the fact that Muse is developing fast.
However, what I'd regard as a very basic feature for any interactivity (show/hide), is missing. Instead of having abutton that can show or hide icons on a map, I now I have to create a duplicate of the same page that don't show them. So when a user click the button, another page first has to load!
Clumsy and stupid.
Thanks for the link - I'll have a look at it.
Regards
Cobus

How to install Windows 8.1 Enterprise on Ultrabook which came with basic Windows 8.1

Hi,
I guess I'm not the first one with this question but anyway...
I've got 2000EUR expensive Ultrabook recently, and what's interesting it came with Windows 8.1. Just standard basic Windows 8.1, not Pro or Enterprise.
Obviously I needed to upgrade it with larger SSD 1Tb and install Windows 8.1 Enterprise as I need Hyper-V and other Enterprise version functionality on day to day bases.
I was surprised that I can't do so as SLIC is reverting Windows 8.1 back to basics!!!
.. so my question is - How can I can Windows 8.1 Enterprise 64Bit on to very expensive Ultrabook which came with Windows 8.1?!?!
Kind Regards,
Kon

Hi,
Enterprise edition of Windows Client OS, is not available via OEM and not via Retail - it's only available via Volume Licensing agreement.
you can purchase an upgrade to Pro, via the Microsoft Store:
http://windows.microsoft.com/en-au/windows-8/feature-packs
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

HR-ABAP basic questions

1) What is the reason for using infotypes with different way(not the same way as in ABAP) of saving the records the database is used in the ABAP-HR Programming?
2) What is the some reason for using Logical Database more ABAP-HR?
3) What is the reason for using precoded macro's in ABAP-HR?

Matt,
I am trying to learn ABAP-HR and found that many things that sound different in HR-ABAP can be achieved through normal ABAP below are the some
    1) Infotypes - I had read some where that records get saved horizantally (record1 record2 record3) instead in a vertial save ( record1
                                                      recordn).
       Why is that this type of database design is adapted. Ofcourse these are called repeate structures I guess.
       Why is that infotype need to have self built database table, internal table and structure?
       This is being already handled in Normal ABAP by creating internal table refering database table/structure.
      So my 1st question in the previous to know what is making infotype different than normal way of having a internal table.
    2) Macro - is the precoded select query but that is already coded in TRMAC. My question over this when we can have select query what is the need for the precoded stuff?.
      For example why to have "RP-READ-INFOTYPE" on some Infotype when this can done through Select * from TABLE pA0*** where field1 = 'xxxx' .
Any ways Thanks for your response,I have 2 years of experience in ABAP and want to shift my self to ABAP-HR. I always try to have strong foundation/understanding of the basics and post the questions to know the differents views (approach of thinking of other ABAPER's). Many times the response provide me very...very valuable stuff and this is the frist time that I have a response that is different from Grath & Sameer. But I guess any response that posted to question which is related always related to ABAP is definitely going to be helpful in one or the other way (may for having good understanding or for preinterview..or some thing else) .
      If the post is found to be non sense there is responsible person "MODERATOR" to block the post. I Dont know what made these two guys bother them much.
     That's great! that you gave me a repsonse that I was always expecting
Ty
SDN Powered

Basic questation

Similar Messages

Maybe you are looking for