Basic question about Weblogic integration

Hi All,
How many xml schema files can be specified at Start node in JPD. Can Dynamically select a schema file at startnode. If Yes How??
Thanks

Pratap,
If I understood correctly you want to start a process with different XML document (dynamically).
It is possible to use XmlObject as the input. This will allow your process to accept every possible XML document.
Later on in your process you can identify the type of the XML document and convert it into your known types.
Hope this answer your query.

Similar Messages

  • BASIC Questions about JavaMail

    Hi Everyone
    I have some very basic questions about java mail.
    I have a weblogic web server. I think it's version 5 or something like that.
    when a user clicks a form on my application sends some information to my database (via my jsp/java program) , I need to send email to a person?
    Does anyone know how to do that ?
    Could someone please describe the process
    Stephen

    I would recommend that you first read the JavaMail design specifications http://java.sun.com/products/javamail/JavaMail-1.2.pdf
    Then, download JavaMail. It comes with a reference implementation of the API and also very good samples.
    Those samples should get you started very quickly on how to send email from Java program.

  • Some questions about the integration between BIEE and EBS

    Hi, dear,
    I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
    could anyone give some guide for me? I'm very appreciated if you can also give any other information.
    Thanks in advance.

    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
    Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
    and many more docs on google
    Hope this helps

  • Basic questions about Infocube

    Hi, everyone.
    I got very basic questions about infocube data handling.
    With infopackage, I extracted all the data about employees from R/3.
    But there were some mistakes during inputting employee data, like positions,
    so I just extracted those employees data once more.
    Now I have two requests in infocube, where the first one has some wrong data.
    Is there any solutions about this?
    I might got it all wrong, so as beginner, any suggestions and explanations will
    be grateful.

    Hi,
    You can manually delete the earlier request by going in the Manage option of the cube. select the request and click on delete icon at the bottom.
    Other option is to make setting in the Infopackage to delete similar or overlapping request.
    Data target tab --> 6th column Automatic loading / deletion of similar request. --> click on the blank icon --> you will get a pop-up --> select the radio button - "delete existing request" --> Select Conditions --> Infosource are same, datasource are same and source system are same, --> selections are "Same or  More Comprehensive "
    Assign points if useful
    Regards
    Venkata Devaraj !!!

  • Basic Questions About Compiling Source

    Hi!
    I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
    First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/  - and during the install process, everything will be installed in its proper dir, right?
    How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
    Once you do figure out which compiler to run, the process is supposed to go like this, right?
    ./configure
    make (or whatever)
    make install
    But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
    $ ls ~/Downloads/arm
    ChangeLog
    README
    armrc.sample
    setup.py
    LICENSE
    arm
    install
    /src
    Maybe it's that 'setup.py' file? What are you supposed to do?
    Of course, it's not only this one that's given me trouble. Sometimes the readme will say I have to edit a certain file for my system. Are there just a few standard changes you always make? Or is it...how can I put it...complicated? How do you find out what's needed in those cases?
    OS 10.6.8
    Xcode 3.2.4
    Python 2.7

    sudont wrote:
    I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
    This is the place for UNIX discussions. If you have developer-related questions, there is a forum dedicated to that as well: Developer Forums
    First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/  - and during the install process, everything will be installed in its proper dir, right?
    Yes. Hopefully the project you want to install follows standard conventions. If so, you can do "./configure", then "make", and finally "sudo make install" to install the software into "/usr/local".
    How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
    The make file will figure that stuff out.
    Once you do figure out which compiler to run, the process is supposed to go like this, right?
    ./configure
    make (or whatever)
    make install
    Yes, with the addition of "sudo" before "make install" because "/usr/local" is owned by root.
    But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
    $ ls ~/Downloads/arm
    ChangeLog
    README
    armrc.sample
    setup.py
    LICENSE
    arm
    install
    /src
    arm? You mean "arm (anonymizing relay monitor) - Terminal status monitor for Tor relays." You really don't want to be messing with that stuff. The only people involved with Tor that are trustworthy are US Navy intelligence who have their own uses for it. If you don't understand it as well as they do, best stay away.

  • Basic questions about macbook pro + external monitor

    Hi,
    I have some very basic questions about using a Macbook Pro + external display. I don't actually have them but need to know how things works.
    So, here they are:
    1) Can I use the external display as the main display?
    2) Will the external display run with its resolution or with that of the mbook pro?
    3) Somewhere I read that you cannot keep the macbook pro open and get the full resolution of the external display. Is that true ?
    4) Is it dangerous to keep the mbook closed while using the external display?
    5) Does the usage of the external display impact on mbook performance?
    I know...a lot of questions , but would be nice if someone could help me.
    Thanks.

    Hi - I am presently using an external display.
    To answer your questions in sequence:
    1. Yes you can use the external display as your main display. The way to enable that mode is to put your MacBook Pro to sleep, attach the external display. Wake up your MBPro with the lid closed and you will see the external display as you main display. You can alternatively set the external to "Mirror" your notebook by using preferences/display.
    2. The external display will run at its resolution although you can adjust and calibrate it using Preferences/Display.
    3. Not true. You get max resolution on both displays. Of course you may have to tweak as mentioned above.
    4. Not at all. I use this mode all the time. Just make sure you initially set up as mentioned above and your LCD on the MBPro will stay off.
    5. I have not seen any performance degradation whatsoever.
    Hope this helps.

  • Basic questions about CISCO IOS

    Hi everybody, Jack here,
    I have some basic questions about the Cisco IOS, could someone help me addressing some of them please? Any feedback would be greatly appreciated.
    Basically, I have two IP addresses assigned by our Cable ISP. From what I understood you can configure a Cisco router for multiple IP addresses using the IOS, thereby allowing someone like myself to take advantage of having multiple IP addresses. This may seem unnecessary to some, but I've always wanted to put the 2nd IP address to use, since after all, I've been paying for it.
    I was just wondering if someone could confirm that what I'm hoping to accomplish is indeed within the capability of the Cisco IOS (i.e. Fully utilize my 2 IP addresses). As well, if someone could kindly suggest a decent CISCO router for online gaming home use that would be super awesome!
    Thank you all so much for reading through the wall of text:)
    Jack

    Jack
    Certainly using multiple IP addresses is in the capability of Cisco IOS routers. How they can be used depends on the relationship of the IP addresses. I am assuming that we are talking about IP addresses assigned for the user to use and that the IP address for the ISP connection is not one of these that we are talking about.
    If both of the IP addresses that you have been assigned are within the same subnet then you would assign one of the addresses to the router interface to establish IP communication between the router and the ISP and to enable Internet connectivity for the devices inside your network that will use the router as their gateway to the Internet. The other address that is assigned can be used for address translation and in particular for static address translation which would make one of your devices inside to be reachable for connections initiated from the Internet (if that is something that you might want to do).
    If the addresses that are assigned to you are in different subnets then you could assign one address to the outside router interface and assign the other address to the router inside interface. Or you could use the second address for address translation.
    I do not have much expertise with online gaming, but I would think that either the Cisco 881 router or the 890 router might be appropriate for you. If 100 Mb connection is sufficient then probably the 881 would be the one to look at. If you need Gig connection then look at the 890.
    HTH
    Rick

  • Basic questions about JAAS capabilities

    I've never used JAAS for authentication or authorization in a Java app before. Can somebody that has (or at least has some experience and knowledge about JAAS) please answer the following couple of basic questions about it? (I know I could probably answer these myself with a few hours of reading.)
    1. Can I use JAAS to restrict the users that can execute specific methods of my code?
    2. If the answer to #1 is yes, is there a way to programmatically determine if a JAAS login user has the permissions to run a method before actually calling that method. In other words, can I ask something like canUserExecute(method) or do I have to just put the call to the method in a try/catch and catch a security exception of some type?
    3. Is it fairly simple to have JAAS authenticate against a Windows Domain or a LDAP server?
    4. Are there programmatic ways to add or edit user information in JAAS?
    Answer to any of these questions are greatly appreciated. I'll even toss a couple of Dukes to the people that answer each question. Thanks in advance.

    You might look at the AfterthoughtSoft-Secure product at http://www.advancedmodelingconcepts.com. It is designed to do just that and will easily allow you to connect to users/group repositories that are in anything from a simple text file all the way up to Kerberos V.
    You can contact the author of the product (me) at bart dot jenkins at gd-ais dot com.
    bart

  • Basic Questions about Package Installation

    I have one basic question about installing packages.
    How can I find out if needed software is already installed without knowing the name of the package?
    For e.g. I want to know, if the MYSQL Server is already installed but I don't know the Package name.
    How can I find out the package name of needed software?

    Difficult.
    Assuming the string "MYSQL" appears somewhere in the package
    name or the package description, you can grep the output from
    "pkginfo". That is "pkginfo | grep -i sql" would list all installed
    packages that contain the substring "sql" with either upper- or
    lowercase letters.

  • Basic questions about Notes domino connector

    Hi,
    I have a very basic question about the Lotus Domino connector for OIM. We have a requirement to provision accounts into the domino mail server and while doing that also update some information directly into a separate nsf file.
    I checked the documentation and it seems while configuring an IT resource, we need to give the Mail DB path, and thats the only place where it refers to it.
    Could you guys please let me know if this can be done? Can I write directly to a different nsf file, which is not like provisioning to the complete mail server. So the other attributes in the IT resource may not be able to be set up as its just the file I need to provision into.
    Looking forward to your response.
    Thanks, M

    Hello folks, please share your experience working with the lotus notes connector.
    Thanks, M

  • Basic questions about Network Licence

    Hi,
    Before buying, I have some basics questions about the network licence of Acrobat
    As an example, if I buy 5 network licence for 20 users.
    If the 5 licence are used or if one user is outside and can't access the licence serveur, is there still some basic features available? I mean, is there a "acrobat reader" part that still allow users to read pdf?
    In the same kind of problem, if 10 users are using Acrobat just for reading pdf file and that a user now want to use acrobat to create a pdf, is there still available licence  or the 5 firsts that are just reading have take the 5 licences available?
    Thank you for your answers

    This is a user to user forum, with the space provided by Adobe
    This is not official Adobe support... I think you need to contact Adobe

  • Basic questions about JRE installation

    I am using NSIS to make a installer, which insalls the JRE 1.5, JMF, Javamp3, then our own software packages.....
    Firstly I have some basic question about the general installatio/deinstallation.
    1 Why sometimes is it required to reboot computer for the installed software to take effect, e.g.
    JRE 1.5. If not, what doest NOT take effect? (Actually in many cases, it seems to work even if not reboot the computer).
    Regarding the JRE 1.5,
    I am wondering:
    1 where is the registry entry written in windows?
    2 how to make the JRE installation process silent?
    Thanks !

    Just click on this link http://mindprod.com/jgloss/registry.html.

  • Question about Weblogic

    Hello,
    I have a question about Weblogic and would like someone to help me with it.
    I created a JSP and everything was doing fine while i was testing it in Tomcat. But once I started the tests with Weblogic, it seemed Weblo wasn't accepting a class that i used to call from my JPS ( a sax parser). Instead of using my parser, Weblogic was using his default SAXParser, what causes problems to my JSP. Trying to solve this, I changed the classpath in Weblo and putted the jar of my parser in the beginning of the classpath, but it still didn't work. Does anyone have an idea of why Weblogic don't accept my parser and uses its default parser instead?
    Thanks in advance!!
    M@G

    naveen.g wrote:
    How to get the path of the domain, where my application is running, in a java code?
    For example, my domain path is "D:\bea\user_projects\domains\production". How to get this path dynamically?Please start a new topic instead of resurrecting an old and non-related thread and hijacking others' threads.

  • Few basic questions about database administration

    Hello,
    I have a few basic questions about database administration.
    1. I switched one of my oracle instances to archivelog mode. I just cannot locate the archive log files on my windows system. The %ora_home%/ora92/database/archive directory is desperately empty...
    2.What is the tools01.dbf datafile used for?
    3.What is the undotbso1.dbf datafile used for?
    Thanks in advance,
    Julien.

    1. The archive log location needs to be specified in your init.ora file. By default, Oracle will place the archive files in either ORACLE_HOME/dbs or ORACLE_HOME/database.
    2. The tools01.dbf file belongs to the tools tablespace which should be set as the default tablespace for system. It primary purpose is to hold Oracle Forms and Reports database objects, however, it should also be used for holding other non sys database objects such as the perfstat (statspack) or other third party database schemas e.g. quests sqllab.
    3. undotbs01.dbf file belongs to the undo tablespace.

  • Basic question about importing wma files

    Hi, I have a basic question about importing wma files. I ripped some cd's on a Mindows computer using Media Player, but now want to copy them to my Mac and use them in iTunes on my Mac. when I use Import in iTunes, nothing happens and I cant even seem to copy them one by one using the Music folder.
    Can someone help me?
    thanks
    eMac   Mac OS X (10.4.4)  

    iTunes for Mac doesn't support .wma files.
    If you can use a PC to convert them, you can use one of many freeware applications. Google for 'wma to mp3'.
    For the Mac there's the shareware program EasyWMA that can convert them.
    Hope this helps.
    M
    17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.3.9)   Several ext. HD (backup and data)

Maybe you are looking for