Basic question for HTML DB

Hi ,
I am a very new user to HTML DB . i had requested for a workspace from htmldb page. I tried developing some basic pages . My application nuber is 920 .
If I have to make the URL accessible to other users ..what do I need to do .
Presently the URL is http://htmldb.oraclecorp.com/pls/htmldb/f?p=960:1:7293424715472730277
how to have this in my machine ? Should I have HTML DB installed and apache installed in my machine ..
Please clarify .
Thanks,
Madhu

Hello,
You need to change the authentication scheme to 'No Authentication (using DAD)
'. You can set this up by creating a new authetication scheme in the
Workspace xxx> Builder - Application xxx>Shared Components>Security>Authentication Schemes>Gallery
Tab.
Once you apply this new auth.. scheme. Then you and your users should be able to open URL directly to the 'http://htmldb.oraclecorp.com/pls/htmldb/f?p=960:1'
To get HTMLDB on your machine you need the following:
1. Oracle 9i or 10g RDMS software
2. 10g RDMBS Companion CD
3. Configure a Oracle database that has XDB schema.
The 10g Companion CD contains the Oracle Apache and HTMLDB engine software. So you don't need separate Apache install.
The Oracle DB, Oracle Apache and HTMLDB engine can all installed on one PC.
If you are using 9i RDBMS , make sure you patch it up to 9.2.0.4 or higher (i think).
Hope this helps.
Regards,
Philip

Similar Messages

Mind answering some basic questions for a few bright HS students?

I am a HS computer science teacher who seeks a professional mentor regarding JDBC. While I have successfully
- installed a MySQL database,
created, queried, updated the database,
- read the Java Tutorial and:
used Connect/J and written a main method to manipulate a
database
created very simple applets to query or update a database with
their run methods.
I have basic questions about how pieces fit together in web application development and how one can best take advantage of OOP when dealing with a database. My motivation are a few very bright post-AP students who have an excellent grasp of OOP and data structures; they are curious to see how Java is used in web applications.
The sample code I have found on the Web has all been small main method examples. I would like to see and discuss a truly OOD application with JDBC, and to discuss how the pieces fit together.
So, aware of our ignorance and of how dangerous a little knowledge can be, and not expecting to go live with an application anytime soon, we seek a very high level understanding of current professional practice (like: "Where does tomcat fit in here?") as well as some direction while we get our hands dirty. (I hope that makes sense.)
If you have time to correspond with us via e-mail, answer some very basic questions, and perhaps take a look at some code as we work through it, we would love to hear from you off-line ([email protected]). We would also appreciate knowing where to look for a good OOD sample application. Thanks.

Complete this tutorial and you will have a much better understanding.
http://java.sun.com/javaee/5/docs/firstcup/doc/toc.html
Also here is the tutorial for j2ee ( a little detailed but useful):
http://java.sun.com/javaee/5/docs/tutorial/doc/

Exchange 2013 Site Resilience - Basic questions for setup in two seperate AD Sites, same domain

I am just getting ramped up with Exchange 2013 and have a friend that I am assisting with planning an exchange 2013 deployment for. I am not asking for step by step directions for setup, just asking for a basic overview so I can dig in to this and
assist.
Goal is to have an exchange server, one in NC and one in Switzerland in an active/passive mode for site resilience. Both servers will be multi role servers.
This is a small organization, less than 50 users and on a budget for equipment. HQ is in NC and the server will have all roles installed on a single server. Switzerland will have only one Exchange server for fail over. There is only
one domain total with two AD Sites.
My questions for clarity -
1. Can I create a Site resilient deployment with two Exchange Multi Role servers in these locations?
2. Currently, the organization does not have a Load Balancer. Will this be required?
3. They do not have a third location for a Witness Server, what issues could potentially happen if the witness sits in one of the two sites?
4. Any other basics for this design are much appreciated. I am reading a lot, however a little confused as I read through the requirements.
Thanks for your input and direction!
Wall

Hi
Please find below answers to your questions.
1. Can I create a Site resilient deployment with two Exchange Multi Role servers in these locations?
Yes
2. Currently, the organization does not have a Load Balancer. Will this be required?
No you don't need to have a load balancer. As you are setting up the infrastructure in Active / Passive mode you don't need a dedicated LB for this.
3. They do not have a third location for a Witness Server, what issues could potentially happen if the witness sits in one of the two sites?
The issue with the witness server in primary or DR site is if your witness server is not responding your DAG won't work properly (failover). If you don't have a 3rd site then you can setup a witness server in your primary site and Alternate witness server
to your DR site.
4. Any other basics for this design are much appreciated. I am reading a lot, however a little confused as I read through the requirements.
I would recommend to use Exchange sizing calculator and technet is the best resource for you :)
Kindly mark this as answer if it fulfill your requirements. :)
Regards, Riaz Javed Butt Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365

Basic questions for a self-taught re: HDV for SD HDV (yes again)

ok - like many others posting on this topic, I am apologising for going over what seems to be one of the most covered topics out there, that still isn't clear!
I am trying to teach myself DVD SP4 in the same way I did with FCP5 (trial, error and lots of forum searching). I am by no means a pro on FCP - but have certainly got enough understanding of it to have cobbled together 7 23 minutes episodes to broadcast! I have gone thought the DVD SP4 Manual and forums and lots of it just makes my brain ache - what mostly lets down my understanding are formats/compression/codecs.
So - my main questions (for now....)
-In DVD SP I couldn't import my QT movie into my assets list as it was an "incompatible format" - is this because it was HDV to a SD DVD Project? Doesn't the process of DVD SP encoding it as Mpeg 2 make is SD anyway?
-I read a post from someone in a similar situation, who advised exporting a HDV sequence as Uncompressed 8 Bit, and bringing that to DVD SP. So am doing that now (6 hours or so for a 23" sequence) and am hoping it gives a great looking picture, but I have seen from its preview icon that its a 720 x 576 frame - why is it not exporting in 16:9? or will it squeeze that down to normal once it's in DVD SP?
Really appreciate any understand you can help me with.
cheers
Hugh

Hughey wrote:
Going back to my original questions - could the problem be a HD file in an SD project?
No. If you followed the workflow process from the above post you would have a SD mv2 file. The file should be playable in Quicktime and it should be 16:9.
EDIT: Yes. Reading back on your OP this question ->
In DVD SP I couldn't import my QT movie into my assets list as it was an "incompatible format" - is >this because it was HDV to a SD DVD Project? Doesn't the process of DVD SP encoding it as Mpeg 2 >make is SD anyway?
I believe that importing a HDV file into a SD project would give you that error but if you follow the above steps and import the mv2, AC3 files you should not get that error.
The reason you got three files is because that is how the preset group is made up. To be completely truthful I duplicated that preset, deleted the AIFF part and renamed the group. I now use that as my default settings when I bring any asset into Compressor.
As far as bring video assets (quicktime SD/HD, or other) into DVDSP in general you can do this but, what is happing is that in the background DVDSP is going through the steps from my above post and creating the mv2, AIFF, AC3 files for you (based on your preference setting in DVDSP) and then replacing the video files you brought in with the compressed files.
Can you play the mv2 file in quicktime? If not then something else must be going wrong.

Basic Questions for Getting Started

I want to make a DVD with a menu that will link to video files that will not be compressed at DVD SD size 720 x 480 (I think that is the right size for DVD?) Instead, I need to make the window size of the videos smaller so I can fit as many as possible on a single-layer disc.
1. Will there be any issues with linking to video files that are not full screen, whether it is played in a computer DVD or a home one?
2. What is the best format for bringing video in from FCP for doing this? I am guessing that since DVD SP compresses as MPG-2, I should bring the video in a non-compressed format so it does not get double compressed.
3. Does anyone have any recommendations for a smaller window size that displays well on screen? 400 by something???
Thanks for any help in advance!!!

1. Will there be any issues with linking to video
files that are not full screen, whether it is played
in a computer DVD or a home one?
I can only suggest that you try it and see, or ask on the Final Cut Pro discussion forum and someone there will know.
2. What is the best format for bringing video in from
FCP for doing this? I am guessing that since DVD SP
compresses as MPG-2, I should bring the video in a
non-compressed format so it does not get double
compressed.
Yes. You should bring it into DVD SP as a QT file (.mov) which you export from Final Cut, presumably using the option "using QT Compression" which I think gives options for size. However, I have never had luck when using the QT compression option. There may be other utilities which can reduce the size of a QT movie.
I suppose that you know to use Compressor to make a more efficient compression than the one built in to DVD SP, and to use APack (or whatever it is called in DVD SP 4) to compress sound - that saves a lot of disc space.

Basic questions for RS232/422/485 & Modbus

Hello,
i have to write some libraries for four types above.
But, i only have a normal windows-computer with a normal serial-connection.
Do i see it correct that can then only make "RS232" with this and that 422 amd 485 are then "special" serial-cards?
So for me it seems that 232/422/485 are three different hardware-types.
And only Modbus is a software-protocol that can be created with labview.
Is this correct?
Thanks for help
Solved!
Go to Solution.

RS232/422/485 are hardware specific. Many RS422 UART cards out there will also handle RS485. Luckily, most of these cards just show up as a COM port, so the software is the same for all 3.
According to Wikipedia, most Modbus devices use RS485 as the hardware layer. I will admit that I have no exprience with Modbus, so I'm not going to offer any advice on it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Morning all. Hope you can help. Basic question for a newbie.

Is there anyway I can check if a form is in QUERY_ONLY mode??
Basically I have a button and I want it to do different things depending on if the form is query only or not.
Really hope you can help me...
thanks alot...
Ben

Whoa. After looking at that I'm still confused.
We have a form on our system that can be called in 2 different ways. Calling the form normally and calling it in Query only mode depending on the user roles.
The form we are calling can then call about 10 other forms. However we want it so that one particular form can't be accessed in query only mode but can be accessed in normal mode.
I'm thinking about just setting a global when calling the main form depending on if it's in query only mode or not. Then checking the global when trying to call to subsequant form, if the global is set to "QUERY_ONLY" then give an error message telling the user is not allowed to view the form or running the form it the global is set to "NORMAL". But didn't know if there was a better way to do it or not.

Basic question for TACACS

Hi All,
I have some issues with TACACS authentication. Do the ACL created for SNMP affect the tacacs authentication if a permit statement is not given for the tacacs server ip.
Regards,
Piyush

The initial config that i did was working fine for authentication:
aaa new-model
aaa group server tacacs+ tacgroup
server 172.30.xx.xx
server 172.30.yy.yy
aaa authentication login default group tacgroup enable
aaa authentication enable default group tacgroup enable
aaa authorization console
aaa authorization exec default group tacgroup if-authenticated
ip tacacs source-interface Vlan34
snmp-server community xxxxxxxxxx
tacacs-server host 172.30.xx.xx
tacacs-server host 172.30.yy.yy
tacacs-server directed-request
tacacs-server key 7 060506324F41
line con 0
session-timeout 5
exec-timeout 5 0
password 7 11481D0029021E0201
transport output telnet ssh
line vty 0 4
session-timeout 5
exec-timeout 5 0
password 7 13441317351C11242E
transport input telnet ssh
transport output telnet ssh
line vty 5 15
transport input lat pad mop udptn telnet rlogin ssh nasi acercon
But after adding :
logging 172.17.30.75
access-list 10 permit 10.70.0.202
access-list 16 permit 172.17.30.190
access-list 16 permit 172.17.30.139
access-list 16 permit 172.17.30.141
access-list 16 permit 172.17.30.140
access-list 16 permit 10.0.30.32
access-list 16 permit 10.0.160.14
access-list 16 permit 10.0.160.15
access-list 16 permit 10.0.160.12
access-list 16 permit 10.0.160.18
access-list 16 permit 10.0.160.20
access-list 16 permit 172.17.30.75
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps bgp state-changes all
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps hsrp
snmp-server enable traps syslog
snmp-server enable traps cpu threshold
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server host 172.17.30.75 xxxxxxxxxx
After adding this i lost connection of my devices 1 by one. It gives % Authentication fail on trying to telnet or on console.
Do i need to add ACS SE ip in this ACL.
Regards,
Piyush

Simple Swing Question for HTML

I am trying to load a web page and I know how to do that using JEditorPane or JTextPane, but what I need to do is for the program to be able to load the page, enter a username and password in 2 of the <input> text fields and then submit it.
IMPORTANT: I don't mean that I or a user would login, I mean the program I write would auto login.
Does anyone know how this is accomplished?
I do know how to do it with Javascript, but this needs to be a Java application.
Once loaded I would then do some web scraping, again with Java, this I think I know how to do.
Thanks,
Dan

Hi!
Maybe you can find one part of the solution here (Reply 2,3,4)
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=285307
or here
http://forum.java.sun.com/thread.jspa?threadID=786631&messageID=4470190#4470190
This would be the part for getting the username and password.
How to submit it I do not know. I would look at class HttpURLConnection and the tutorial: http://java.sun.com/docs/books/tutorial/networking/urls/index.html

Basic Questions for Airport Express...

The apartment I am moving into provides Internet services, but you must provide your own wireless router if you would like wireless internet. The apartment is relatively small, and there will be a total of three people in the apartment (I can imagine that only three laptops, two iPhones, and one iPad will be connected to the wireless network at one time).
I would like to buy a reburbished AirPort Express Base Station with 802.11n and AirTunes (the 2008 version), but can it be used to create a standalone network? Could I just plug it into the wall, connect it to an Ethernet cable, then set up a wireless network from my laptop and be good to go?
If so, how is the signal strenth? Would it be able to provide fast service to all devices connected in the apartment (the unit is 1188 sq. units in size)? Also, would I be able to connected my non-wireless printer to the Airport Express to print wireless from my laptop?
Thanks so much.

Could I just plug it into the wall, connect it to an Ethernet cable, then set up a wireless network from my laptop and be good to go?
Yes
If so, how is the signal strenth?
It all depends on the number of obstructions that the signal must pass through to reach a wireless device. A typical wall absorbs 15-20% of the signal, so you would never want the signal to have to pass through more than 3 walls to reach a connected device.
Any other wireless networks in the area (there will be plenty in an apartment complex) can also interfere with the wireless signal. No way to know whether this may or may not be an issue until you try.
Also, would I be able to connected my non-wireless printer to the Airport Express to print wireless from my laptop?
Yes, assuming that the printer is compatible with the AirPort Express. Most are, but Apple does not provide a compatibility list. You will need to check with the printer manufacturer on that, or simply try it.
Even if the manufacturer says it "should work", you wont' really know until you try.

Basic question reg. distributed installatio

Hi everybody,
          i have a very basic question, for which i wasn`t able to find a simple
          answer/solution.
          I am planning to set up Bea in a distributed environment. the idea is
          to have a physical machine for the presentation, meaning
          webserver/jsp/servlets in the dmz1 and a machine with the application
          server holding ejbs in a different dmz.
          This results in an architecture where the presentation layer only can
          be contacted via http/https by the users and the logic layer
          communicates with the pres. layer via RMI/T3.
          Is there any documentation on such a setup ? any hints ?
          Thanks in advance, i'll keep on searching the dox.
          Berthold Krumeich


[att1.html]

Best table format for html?

I see that after I convert my FM doc to Online Help (via webworks), the tables do not expand in the output the way the text does. Is there a specific table format that works best for conversion to html?
Regards,
Bill

Bill,
in FrameMaker you design each table to have certain column widths because you are limited by the size of your page (and the paper).
HTML browsers have more freedom unless they are explicitly instructed to create certain column widths. The basic rule for HTMl tables (and there is only a single table "format" in HTML) are those:
Check each column for its minimum width, specified by a graphic or a very long unhyphenated word.
Look in each column for the longest content. i.e. as if multi-line content would be written in a single line (attention: <br> tags force line breaks)
If all columns expanded to hold the longest content fit inside the browser window: scale them accordingly: This may result in tables which are smaller than in print, because they contain only very short texts
If the columns do not fit the current browser width, scale them down to fit the browser width, but only as far as the minimum width.
If the sum of minimum widths is wider than the browser window: create a horizontal scrollbar.
Of course, using CSS instruction like {width: 12em;} one can force certain column width independent from content, but this is usually not the default.
If you want all your tables to always span the full width of the browser window, you have to add the following to your CSS (maybe via the Webworks UI):
table { width: 100%; }
HTH,
- Michael

Sorry for such a basic question

Hi
Sorry for such a basic question.
I have been given the challenge to learn after effect (CS4), it appears to lag loads and take a hour to render (a 10sec composition).
Is the laptop I have been 'given' not really recommended for after effects, yes the program runs and works albeit very slowly, and appears to tick all the boxes on the minimum requirements.
Acer Aspire 5745
Processor         Intel i3 CPU M350 @2.27GHz
Memory            4.00 GB ( 3.68)
System               64-bit
Running on Windows 7 Home Premium
Is it a reasonable request to ask for something better?
Thanks

First, welcome to AE.
Most people here think of using the software as journey, and not something that can be totally mastered. That's an important differentiation from most applications, no?
Another important differentiation: knowing the basics is the key to doing the impressive-looking stuff in AE. There is a formidable number of little details to learn at the beginning which will relieve dead ends and frustration later. If you start at the beginning, you actually progress faster later on. Here's a good starting point:
http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html
Don't overlook the links within; they're valuable. Other good learning resources can be found at videocopilot.net (free), plus Total Training ($$$).
To answer your question directly, I'd say yes: it IS reasonable to ask for something better. AE is a RAM hog, and in AE-Land, 4 gigs is almost nothing. If you must have a laptop, make sure it's filled up with memory. Serious AE power users would advise forsaking laptops altogether and going with a desktop machine.
To ease your task in the interim, I would do a few things:
Got multiprocessing (aka Render Multiple Frames Simultaneously) turned on? Turn it off and keep it off.
Got Open GL turned on to accelerate rendering? Turn it off and leave it off.
Got any footage in a project from a consumer camera, XDCam, HDV cam, helmet-cam or DSLR? Use a different application than AE to convert them into LOSSLESS footage. The files will be huge; that's life in AE-Land.

Possibly a very basic question but I have set up a spread sheet in Numbers and have viewed help videos but I can't get it to give me sums for the columns I highlight. Keeps coming up with the figure zero. I have version 09 2.3(554). Can anyone help

Possibly a very basic question but I am going nowhere without a solution. I have set up a spreadsheet in Numbers but it won't give me sums for chosen columns. I have viewed the run through videos and used the formula but nothing happens apart from giving a figure of zero or a red arrow. The sum icon in the bottom left hand section of the window does not highlight or show any total as I understand from the video that you can drag whatever total is here onto the relevent position on your spreadsheet. I have Numbers 09 version 2.3 (554). Can anyone advise. Thanks.

Hi Sohojools,
To sum a column, use a formula such as this one in Cell A6
Type this in a cell below your data:
=SUM(A2:A4) or whatever range of cells you want to sum. The easy way is to type:
=SUM(
and then drag or shift-click to select the range of cells. Close the formula with a final bracket ")".
The sum icon in the bottom left hand section of the window does not highlight or show any total
To see the sum (and other simple statistics) in the bottom left, select a range of cells. That tells Numbers which cells you are refering to.
The videos are good, but the Numbers'09 User guide, and the Formulas and Functions User Guide are better. Download them from the Help Menu in Numbers.
Regards,
Ian.

Basic Questions related EHPs for SEM

Hi Guys,
I've some basic questions related to EHPs: -
1. If we don't mean to implement any of the new functionalities does it make any sense to implement EHP? In other words do EHPs also have some general improments other than the functionalities which can be specifically activated?
2. If we just activate a functionality and don't implement/ use it can there be any negative impact?
3. In case of a pure technical upgrade from SEM 4.0 to SEM 6.0 which EHP would be recommended?
4. Is there a quick way to find all relevant notes in EHPn which are related to corrections for EHPn-1?
Thanks in advance,
-SSC

HI,
If you see some of my older posts I have had many issues with certain features of the EHP2 functionality but that doesn't mean I would recommned against it.
BCS 6 EHPs 3 & 4 (BCS 6.03 / 6.04) - enhancement packs worth implementing?
BCS 6 EHP 2 (BCS 6.02) - activation of enhancement pack
My recommendation is to implement the EHPs but not necesarrily activate the functions (in SFW5) unless you need them - this means that you will only have to test once after EHP implementation and will have the ability to activate the other features as and when required (although testing is required after activation of course) whereas it might be difficult to persuade your client/basis team to implement EHP4 later if you don't do it now.
In the features of EHP2 (activate FIN_ACC_GROUP_CLOSE) it states that there is a general performance improvement - although I have yet to experience it! From OSS note 1171344 "The functionality which is available in EHP2 consists of...
... Performance improvements of status management, reporting and initial start-up of consolidation workbench and monitor.
Since activating FIN_ACC_GROUP_CLOSE I have had many OSS notes requiring application but i discovered that when the technical team implemented the EHPs (before i joined this client) they somehow forgot the latest SP (support packs) and didn't upgrade to the current level - so make sure that you get the right SPs too (see the links in Greg's link above) to avoid the many OSS notes.
As for your question - "is there a list of OSS notes to specific to EHP upgrades? - the answer is most definietly "NO" - I already asked OSS in desperation!
however, you can see the OSS notes that i have applied listed in the above link ( BCS 6 EHP 2 (BCS 6.02) - activation of enhancement pack )

Basic question for HTML DB

Similar Messages

Maybe you are looking for