Basic question: sending patch, bank changes in Logic Pro 7.1
I find that when I use Logic's Track Mixer to assign patch and bank information to a midi track, my sound modules (usually an old Roland SC-8820 and a new Korg Micro X) play what they are supposed to (though I don't have a multi-set for the Korg yet, working on one). But when I save my Logic song, close Logic and reopen the song, the correct patch and bank info is not necessarily sent to the synths. The Track Mixer correctly shows my patch and bank settings (in the CC#00 and CC#32 boxes, etc.) but these banks and patches don't play -- unless and until I go ahead and click in those MSB or LSB boxes in the Track Mixer. I don't have to change anything, just click. Then apparently the Track Mixer sends the patch information and my synths play what they are supposed to play. Is this the way Logic always works? Is there anything else I can or should check or uncheck? (It's a drag, when working on a song with a lot of tracks, to have to click every track again every time to get the right patches playing.)
G4 Dual Mac OS X (10.4.8)
Powerbook Mac OS X (10.4.8)
Thanks for the suggestions, but things still aren't working. To implement what I think you are recommending:
In the Logic Pro menu, Preferences, MIDI submenu, Reset Message tab, there is a checkbox for "Send Used Instrument Settings on Reset." I've checked it.
In the File Menu, Song Settings, MIDI submenu, General tab, there is a "After Loading Song Send __ Used instrument MIDI settings" checkbox. I've checked it, too.
But with both checkboxes checked, I still don't get the right patches when the song loads -- yet, as before, just clicking in either MSB or LSB boxes in the track mixer seems to send the values I've previously put in those boxes, and the song plays as it should.
As to the other idea: by "insert the instrument settings into the beginning of each track," I am thinking that you mean choose "Insert Instrument Settings as Events" from the MIDI menu in the arrange window. Went there, did that. But for some reason after I do so my events list gets amended to show the patch I've selected for that track in the Track Mixer, but not the MSB or LSB -- CC#00 or CC#32-- settings I entered in the Track Mixer.
Suggestions?
Powerbook Mac OS X (10.4.8)
Powerbook Mac OS X (10.4.8)
Powerbook Mac OS X (10.4.8)
Similar Messages
-
HT1338 My basic content download wont complete for my logic pro?
My basic content download wont complete for my logic pro?
Same thing is also happening is Logic Pro X... but I have not seen or found links to the new Logic Pro X additional and basic content downloads.
ART OF NOISE helped with Logic 9 by offering up the following :
However, to resolve this... use these external links and download and then install all the essential and additional content instead.
http://dl.dropbox.com/u/2972851/logic-downloads-fixed.html
-eze -
Text Style question re INSTR Global text source - Logic Pro X
I write arrangments for an 18 piece big band. The line up is 5 saxes, 4 trumpets, 4 trombones, piano, bass, drums, male vocalist & female vocalist.
I only have one GM sound module (Kentron SD2). I use a Midisport 2x4 Midi Interface between the Mac Mini and the Sound Module.
The set up in Logic Pro X is that in the midi envronmemnt I have 1 multi instrument with the complete band linked up to that
The set up is as follows:
Channel 1 1st and 2nd Altos
Channel 2 1st and 2nd Tenors
Channel 3 Baritone
Channel 4 1st and 2nd Trumpets
Channel 5 3rd and 4th Trumpets
Channel 6 1st and 2nd Trombones
Channel 7 3rd and 4th Trombones
Channel 8 Piano
Channel 9 Bass
Channel 10 Drums
Channel 11 Male Vocal
Channel 12 Female Vocal
All the above instrments are on individual tracks even where they share a midi channel- these parts are printed out for use by the band
Channel 13-16 are spare channels that I use during the development of the arrangement - the track contents for these are not printed out
Here is the problem. When I print out the parts for the various insturments and use the INSTR global text to identify the specific instrument on the part header, what is displayed is the patch identity for the various instruments as indicateid in the Library. Logic is not reading the track name for this.
It follows that 1st and 2nd Altos will show on the part header Alto Sax - similarly for the other wind instruments sharing a midi channel.
I am a recent convert from Logic Audio for Windows v 5.5.1 where I used the same set up. In that case Logic read the track information and therefore the instrument identification was correctly displayed on the printed parts.
Any ideas how I can overcome this problem without having to go into each part and manually change the instrument description.
thanks
SwingtonesHi everyone, Sorry for my earlier long post, I just found the answer. All I needed to do is select REGION instead of INSTR
Happy Days!
Swingtones -
Question about Hard drive Space and Logic Pro
We just installed Logic Pro 7.2 (and Tiger) onto our Dual G4. We have nearly filled the bootup drive, with tonnes of space on our other hard drives (80GB and 100GB). With only ~4 GB left on the startup drive, will this cause problems with Logic Pro? We have more than the recommended RAM, but I was wondering if the hard drive space might be an issue, like with iDVD where you need ~8-10 GB free to burn a DVD.
I've been considering copying things over from my startup drive to my 80GB drive (which has tiger on it too)and making the 80 GB drive my new startup drive, but it's a bit of work and if I don't need to do it right away I don't want to bother. What is the recommended amount of free hard drive space and memory for Logic Pro to work well? I personally like to have ~10GB free for anything, but that might be tricky at this point. I want to know if I should go through with the hassle of moving things over or wait a bit and see how it goes. I've not ahd a chance to use the program yet, but I'd like to set it up and keep it working smoothly once I start to use it. Any advice or experience from anyone in this department?Your best off having at least 25% free space of any hard drive.
With Logic, It is a good idea (though not necessary) to have your OS and apps on one HD, and your song files and samples (and other files) on another. I would also suggest that you get a hard drive with a speed of at least 7200rpms. -
Basic question on how to change menu text in this FLA file
I am kind of new to Flash and I am just a bit stuck on where
I am suppose to edit the menu text in the flash file I purchased
(link below).
I can see where to edit the hyperlinks in the action script
for each menu item but I can find the text (e.g. I want to change
the word “Our Gallery” and type
“Competitions”
http://www.abcpchelp.com/header3_fv8.flaHello IawaGuy:
Thanks for getting back to me. I've been really having a
problem with this flash header. Being new to some of these programs
doesn't help much. It's been a learning curve for me. I used a
program called Flash Decompiler Trillix to convert the swf to fla.
and converting the symbols as text so that I could edit them. It
turned out that the text that came up was a jumble of letters which
I had to decifer. I was finally able to change the all the text to
what they were supposed to be. After I exported it back into the
website in Dreamweaver the links on the drop down menus didn't
work.
It's as if the layers aren't connected in some way. The main
links work but I can't access the drop down part which also contain
links as well. I hope you can help me with this.
Thanks,
Glenn
Email me and I will send file by
reply -
Basic question - how do you deploy a Logic app as SaaS?
This is partially a broader question of how you deploy SaaS solutions on Azure, but wanting to know in relation to logic apps.
So let's say I wish to create, for sake of argument, a service that allows contractors to log their hours (either via a phone or through their laptops)
Each contractor is a separate client of mine, and I wish to develop an SaaS service that I can sell to hundreds of contractors.
What is the blueprint for such a solution?
Is it:
- I create a web app to give me a web based interface they can use
- A mobile app in which they can enter their data by mobile
- A logic app to take data from both of these and process and store them into a SQL Server database
And if so, would the only thing separating one contractor from the other be their logins? Or is there way of instantiating separate databases for each user (let's say I wanted to give each client their own database)? Just trying to get my head round how
SaaS solutions would work. Any tutorials/good reads most welcome!Actually I came across a few articles talking about Single tenant vs Multi tenant architectures and that's opened up a whole new world for me, exactly what I was looking for. Will read up a bit more on how logic apps work in a single vs. multi-tenant environment.
-
Sticky proposal: Logic Pro (first draft)
Ok, here's a first draft of the proposed sticky for this forum. After looking at what we had, I decided to basically do it in four parts - introductory stuff (please post version numbers etc), problem solvers, tips, and audio general stuff.
I'm not making this a work of art, but value feedback in order to make this useful before we ask the mods for a sticky. It's not complete, such a task is a much bigger job, but it's a start. What's not there? What's confusing? Is it too much stuff? Too newbie unfriendly?
When we are happy I will probably style/format it a little better as well.
Lemme know - cheers,
This is a compilation of Logic tips, useful threads and information for Logic Pro users, compiled mostly by Eriksimon (thanks!) with additional contributions from Bee Jay and (final forum member list to be completed)
- Getting the best help from the Apple Logic Pro Discussions
This forum is intended to be a user-to-user support form to users of Logic Pro.
Please keep your posts on the topic of Logic Pro, or you risk your post being removed for being off-topic. There are plenty of other general audio and recording forums better suited for asking general audio questions.
Questions about third-party software and hardware are welcome as long as they relate directly to using these products in conjunction with Logic.
This forum is dedicated to the post-Apple versions of Logic, which means questions for Logic Pro 7, Logic Pro 8, and Logic Pro 9 are welcome. However, please include the version of Logic you are using, in order to give useful advice (as things change between versions.) Better still, put your Logic versions and system information in your signature, to save having to ask for it.
If you are a user of Logic Express, you should post in the Logic Express forum, rather than the Logic Pro forum, in order to get advice suited to your particular software version (as some things are different between Logic Express and Logic Pro).
Remember that many questions, especially if you are new to Logic, have been asked multiple times before, so it's good practice to use the Discussions Search feature in the top right of the page to search for previous discussions relating to your issue. You will find a wealth of information. Often you can find a solution to your question without needing to post and have someone type out a response they've already typed out hundreds of times before - or worse yet, have your question ignored.
Please be respectful of the members on the board at all times - we are happy to help people out, but do so in our own free time and don't have a duty to do so.
Posts discussing non-Logic related items, off-topic or controversial subjects, abusive posts and harsh language are not welcome and will likely be removed, as will posts discussing illegal software. Please read the Terms of Use of this board for more info at:
This post is a user-contributed compilation of links to content on this forum, official Apple documentation, and occasionally some other outside content where useful to Logic users. It is not in itself an official Apple document, and Apple do not take responsibility for it's content. It is not intended to be complete or comprehensive, just a helpful start for common issues.
Logic feature requests and feedback to Apple Logic team:
http://www.apple.com/feedback/logicpro.html
- General Help, Issues, Errors & Troubleshooting
Logic Pro 8 (*probably also for Lo9ic): Troubleshooting Basics
http://support.apple.com/kb/HT2375
Logic Pro, Logic Express: Remove Audio Unit plug-ins to troubleshoot issues (9?)
http://support.apple.com/kb/HT2852
Logic Pro, Logic Express: Spinning disc cursor after recording
http://support.apple.com/kb/TA24239
Logic Pro/Express 8 - Logic seems to stop responding (hang) while "Searching for Audio Unit plug-ins" when starting up (9?)
http://support.apple.com/kb/TS1086
Logic 9 (and all other LS2.0 apps) crashing on startup, other Logic Studio apps as well. Solutions:
http://discussions.apple.com/message.jspa?messageID=9879826#9879826
http://discussions.apple.com/message.jspa?messageID=9907434#9907434
Corrupted Plug Ins and a possible solution:
http://discussions.apple.com/thread.jspa?threadID=1912373&tstart=0
Delete AU cache - problems with invalidated Plug Ins:
http://discussions.apple.com/thread.jspa?threadID=1856107&tstart=0
How to open songs from Logic 4 or earlier (L7 + L8 needed)
http://support.apple.com/kb/HT3612
Why do you get 'kernel panics'?
http://discussions.apple.com/message.jspa?messageID=9954472#9954472
Logic Pro 8, Logic Express 8: Cannot select USB mic as an audio input
http://support.apple.com/kb/TS2648
Logic crashes: MelodyneRewireDevice or MelodyneBridge or Rewire need an update.
http://www.celemony.com/userforum/viewtopic.php?p=9807
Logic or GarageBand may quit unexpectedly when starting with Mac OS X 10.5 Leopard if Melodyne is installed
http://support.apple.com/kb/TA25071
Links/RSS feed of all Apple support docs released the past year concerning Logic Studio apps:
http://rss.support.apple.com/logic
Logic Pro/Express 8: Error when bouncing files with normalize checked (9?)
http://support.apple.com/kb/TS1094
Logic Pro/Express 8: Converted Apple Loops play in different key and tempo than expected (9?)
http://support.apple.com/kb/TS1283
Logic Pro/Express: Freeze cursor appearance prevents Audio Instrument track editing (9?)
http://support.apple.com/kb/TA23365
Logic Pro, Logic Express: Instrument not triggered as expected (9!)
http://support.apple.com/kb/TA22915
Logic Pro 8: Missing content after install:
http://discussions.apple.com/message.jspa?messageID=6602988#6602988
Logic: Dense clusters of automation nodes can cause audio to stutter
http://support.apple.com/kb/TS2139
Logic: Rebuilding the Loop Index
http://support.apple.com/kb/HT3443
Solutions for noise in the audio signal
http://support.apple.com/kb/HT2743?viewlocale=en_US
Logic Pro, Express: Solo Safe mode may not remain disabled for a particular channel strip
http://support.apple.com/kb/TS1939
Logic Pro/Logic Express: Error while trying to sync Audio and MIDI
http://support.apple.com/kb/TS2111
Logic Pro 9: Number of recent items sometimes resets to 10
http://support.apple.com/kb/TS2810
Logic Pro 8, Logic Express 8: ReWire inputs in existing projects may shift unexpectedly
http://support.apple.com/kb/TS2466
FAT32 disks
Message: I/O ERROR RESULT -36
Beachball when recording
http://discussions.apple.com/thread.jspa?threadID=2053469
http://discussions.apple.com/thread.jspa?threadID=1940763
Logic: Resetting MIDI Drivers
Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers.
http://discussions.apple.com/thread.jspa?threadID=1989370&tstart=0
Logic Pro: EVB3 Organ Instrument does not play
http://discussions.apple.com/thread.jspa?messageID=7344356�
Logic Pro: Inserts disappear from output channel strips
http://discussions.apple.com/thread.jspa?messageID=6796713
Logic 8: Where is the Tutorial DVD mentioned in the manual?
http://discussions.apple.com/thread.jspa?messageID=7401134�
Logic: If new AU plugins don't show up, reset AU cache
http://discussions.apple.com/thread.jspa?messageID=6247833�
Logic 8: Remove serial number / license
http://discussions.apple.com/thread.jspa?messageID=5636506�
Logic 8: Logic only runs when XSkey is connected
http://support.apple.com/kb/TS1106
Logic 8: Hybrid Morph missing
http://discussions.apple.com/thread.jspa?messageID=6289860
- General Logic Useful Tips & Techniques
Logic: CoreAudio System Overload Messages
http://support.apple.com/kb/TA24535
Logic: Learn about I/O buffer size and monitoring latency
http://support.apple.com/kb/HT1314
Logic Pro 8 (*probably also for Lo9ic): Tips for balancing multi-core performance
http://support.apple.com/kb/HT3161
Logic Pro 8, Logic Express 8 (*probably also for Lo9ic): Startup modifier keys
http://support.apple.com/kb/TS2047
How to setup Aggregate devices (help, my USB Mic doesn't work):
http://support.apple.com/kb/HT1215
Official Logic Pro 9 PDF manual:
http://documentation.apple.com/en/logicpro/
-click on View as PDF and the PDF will be downloaded.
If it doesn't download, ⌥-clicking on the link might work.
How to make the PDF manual appear in Logics' help menu:
http://discussions.apple.com/message.jspa?messageID=9974746#9974746
Logic Pro/Express 8: Discussion of the Normalize feature in the Bounce dialog
http://support.apple.com/kb/HT2890 (also 9?)
Logic Pro/Express 8: How the EXS24 sampler addresses RAM in Logic 8 (9?)
http://support.apple.com/kb/HT1041
Logic Pro, Logic Express: About compressed audio and track counts (9!)
http://support.apple.com/kb/HT3331
LP8: How to make readable lyrics that follow song
http://discussions.apple.com/message.jspa?messageID=9091728#9091728
Creating Split Stereo files:
http://discussions.apple.com/message.jspa?messageID=7932256#7932256
Performing a loopback test:
http://discussions.apple.com/thread.jspa?threadID=1883662&tstart=0
The novice quick guide to buses:
http://discussions.apple.com/thread.jspa?threadID=2108996&tstart=0
Sidechain Compression using a Bus:
http://discussions.apple.com/message.jspa?messageID=9943631#9943631
How to sidechain an Apple Loop to a Synth (ES2)
http://discussions.apple.com/message.jspa?messageID=9977884#9977884
Side Chain general:
http://discussions.apple.com/thread.jspa?messageID=3927558
http://discussions.apple.com/thread.jspa?messageID=5137845
http://discussions.apple.com/thread.jspa?messageID=5081924
http://discussions.apple.com/thread.jspa?messageID=3007887
http://discussions.apple.com/thread.jspa?messageID=3946575
Side chain filtering:
http://discussions.apple.com/thread.jspa?threadID=1356882
Side chain in Logic instruments:
http://discussions.apple.com/thread.jspa?messageID=6069943
How do I lower my recording level?
http://discussions.apple.com/thread.jspa?threadID=2077388
How to use MIDI Controller Knobs
http://discussions.apple.com/thread.jspa?threadID=1297134
Aligning audio tracks
http://discussions.apple.com/thread.jspa?threadID=1988906
How to split one stereo file into two mono.
http://discussions.apple.com/thread.jspa?threadID=1414557
Off, Read, Latch, Touch, Write
http://discussions.apple.com/thread.jspa?threadID=1996815
How to identify audio file types and formats of regions in Logic
http://support.apple.com/kb/TA25098
Logic: Compress types discussion
http://discussions.apple.com/thread.jspa?threadID=1272696&tstart=0
GarageBand, Logic: Where loops get installed
http://support.apple.com/kb/HT1045
Why level control is important, and hot recording is outdated.
http://discussions.apple.com/thread.jspa?threadID=2114225&tstart=50
How to use multiple keyboards in Logic:
http://discussions.apple.com/thread.jspa?messageID=6929093
How to use arpeggiators in Logic:
http://discussions.apple.com/thread.jspa?messageID=7812007�
Why are my MP3 bounces so loud?
http://discussions.apple.com/thread.jspa?threadID=2047411
Destructive Input processing
http://discussions.apple.com/thread.jspa?messageID=6000085
Compressing during recording
http://discussions.apple.com/thread.jspa?threadID=1260375&tstart=0
How to "Kill Voices" in a stereo track for Karaoke purposes (if you really must...)
http://discussions.apple.com/message.jspa?messageID=10115536#10115536
How to set iTunes to 'neutral' playback
or
"My bounce/mix sounds different when played in iTunes"
http://discussions.apple.com/thread.jspa?threadID=2148955&tstart=0
- Audio General
Final mix too quiet
http://discussions.apple.com/thread.jspa?threadID=1343759
Wikipedia: Audio bit depth
http://en.wikipedia.org/wiki/Audiobitdepth
Get to know your ears (& equipment)
http://audiocheck.net/audiotests_index.php
Very useful utility for checking vital stats
http://ragingmenace.com/software/menumeters/index.html
How to Record an Electric Guitar on Your Mac: Optimizing Your Analog Signal
http://www.apple.com/pro/techniques/connectingguitar/index2.html
---------------------------------------------Bee Jay wrote:
This is a compilation of Logic tips, useful threads and information for Logic Pro users.
- Getting the best help from the Apple Logic Pro Discussions
Remember that many questions, especially if you are new to Logic, have been asked multiple times before, so it's good practice to use the Discussions Search feature in the top right of the page to search for previous discussions relating to your issue.
The search still doesn't work, for anything pre-Snow Leopard... maybe you should omit this tip until it works again...
- General Help, Issues, Errors & Troubleshooting
Okay, here I marked some of the links because at the time it was not clear if they adress things that are still actual in L9.
It may be a good idea to name the topics that apply to all Logics' (7, 8 and 9) simply Logic Pro (or leave 'm nameless), and the others after the specific version they apply to. The topics with a (9?) behind it, have still to be confirmed to also apply to L9 (.0.2)
I used underlining to mark text that can be deleted.
1. Logic Pro _8 (*probably also for Lo9ic)_: Troubleshooting Basics
http://support.apple.com/kb/HT2375
2. Logic Pro, Logic Express: Remove Audio Unit plug-ins to troubleshoot issues (9?)
http://support.apple.com/kb/HT2852
3. Logic Pro, Logic Express: Spinning disc cursor after recording
http://support.apple.com/kb/TA24239
4. Logic Pro/Express 8 - Logic seems to stop responding (hang) while "Searching for Audio Unit plug-ins" when starting up (9?)
http://support.apple.com/kb/TS1086
5. Logic Pro 9 (and all other LS2.0 apps) crashing on startup, other Logic Studio apps as well. Solutions:
http://discussions.apple.com/message.jspa?messageID=9879826#9879826
http://discussions.apple.com/message.jspa?messageID=9907434#9907434
6. Corrupted Plug Ins and a possible solution:
http://discussions.apple.com/thread.jspa?threadID=1912373&tstart=0
7. Delete AU cache - problems with invalidated Plug Ins:
http://discussions.apple.com/thread.jspa?threadID=1856107&tstart=0
...and continue to number like this.
How to open songs from Logic 4 or earlier (L7 + L8 needed)
http://support.apple.com/kb/HT3612
Why do you get 'kernel panics'?
http://discussions.apple.com/message.jspa?messageID=9954472#9954472
Logic Pro 8, Logic Express 8: Cannot select USB mic as an audio input
http://support.apple.com/kb/TS2648
Logic crashes: MelodyneRewireDevice or MelodyneBridge or Rewire need an update.
http://www.celemony.com/userforum/viewtopic.php?p=9807
Logic or GarageBand may quit unexpectedly when starting with Mac OS X 10.5 Leopard if Melodyne is installed
http://support.apple.com/kb/TA25071
Links/RSS feed of all Apple support docs released the past year concerning Logic Studio apps:
http://rss.support.apple.com/logic
Logic Pro/Express 8: Error when bouncing files with normalize checked (9?)
http://support.apple.com/kb/TS1094
Logic Pro/Express 8: Converted Apple Loops play in different key and tempo than expected (9?)
http://support.apple.com/kb/TS1283
Logic Pro/Express: Freeze cursor appearance prevents Audio Instrument track editing (9?)
http://support.apple.com/kb/TA23365
Logic Pro, Logic Express: Instrument not triggered as expected (9!)
http://support.apple.com/kb/TA22915
Moved these together:
Logic Pro 8: Missing content after install:
http://discussions.apple.com/message.jspa?messageID=6602988#6602988
Logic 8: Hybrid Morph missing
http://discussions.apple.com/thread.jspa?messageID=6289860
Logic: Dense clusters of automation nodes can cause audio to stutter
http://support.apple.com/kb/TS2139
Logic 8: Logic only runs when XSkey is connected
http://support.apple.com/kb/TS1106
- General Logic Useful Tips & Techniques
Logic: CoreAudio System Overload Messages
http://support.apple.com/kb/TA24535
Logic: Learn about I/O buffer size and monitoring latency
http://support.apple.com/kb/HT1314
Logic Pro 8 _(*probably also for Lo9ic)_: Tips for balancing multi-core performance
http://support.apple.com/kb/HT3161
Logic Pro 8, Logic Express 8 _(*probably also for Lo9ic)_: Startup modifier keys
http://support.apple.com/kb/TS2047
How to setup Aggregate devices (help, my USB Mic doesn't work):
http://support.apple.com/kb/HT1215
Official Logic Pro 9 PDF manual:
http://documentation.apple.com/en/logicpro/
-click on View as PDF and the PDF will be downloaded.
If it doesn't download, ⌥-clicking on the link might work.
How to make the PDF manual appear in Logics' help menu:
http://discussions.apple.com/message.jspa?messageID=9974746#9974746
Logic Pro/Express 8: Discussion of the Normalize feature in the Bounce dialog
http://support.apple.com/kb/HT2890 _(also 9?)_
Logic Pro/Express 8: How the EXS24 sampler addresses RAM in Logic 8 (9?)
http://support.apple.com/kb/HT1041
Logic Pro, Logic Express: About compressed audio and track counts (9!)
http://support.apple.com/kb/HT3331
(no edits for the rest of the list.)
I like the format, btw, simple and easy to 'scan'. No need to 'pimp' it much more.
Great Job BJ! -
Logic pro, Kontakt 2 and keystation pro
When I use an 'instrument bank' in Kontakt 2, I want to controll the different cells (patches) with the buttons B46 to B51 from my M-Audio keystation pro. In Cubase this happens automatically; but what to change in Logic pro to become that result? Now, pressing those buttons in Logic don't change the patches ...
thank you for helping
DirkI've forgotten: The recording is ok with FCP
-
Background static in logic pro
This migt be a dumb question, but I am new at Logic Pro.
When I try to use a synth setting with my external keyboard, a loud background static appears. How do I get rid of this???
Thanks!Can't find the cause - have tried changing all the settings, reinstalling, etc. Nothing seems to work.
-
Logic pro 9 - Tracks reset faders when song returned to start
Logic resets settings on tracks (volume, pan, maybe more) when song is returned to Start. All mixing changes are lost even if song is saved before rewind. Automation state irrelevant.
All suggestions thought about and may be tried.
Thanks,
JoeOk!
First off, I would like to thank Data Stream Studio for how fast they returned with an answer.
Next, their answer did allow me to make changes to settings and have the changes survive after saving and rewind.
However, after going through all the tracks and resetting the faders to 0db and saving the file; if I then try to make further changes to the mix and then rewind the same problem reappears.
This in effect will force me to mix by list not by DAW graphic interface.
So I guess the real question is "what it is blocking logic Pro 9 from recording and keeping channel setting changes?"
As I stated in the original question, the automation mode is irrelevant. Such changes as are made in the automation data are lost when the track is rewound. -
Logic Pro 7 vs Logic Express whats the difference
please explain it to me......
Hi,
Another difference between Logic Express and Logic Pro is that Logic Express
does not allow multiple tracks within the Arrange Window to be armed for
recording.
So, when I use my external notation program sending live MIDI data to
Logic Express (my notation program does not know how to save the music
as a MIDI file), I click on the lane within the arrange window, and only that
lane can record incoming MIDI. If I have 5 staves in my external notation
program, I mute 4 of them, as I only want one staff recorded at a time (such
as for Violins I).
Here is another related question. If I upgrade to Logic Pro, could I play
my external notation program and send MIDI live to the slaved Logic Pro
such that Logic not only records on 5 lanes simultaneously, but also
knows to attach MIDI channel 1 data to a particular lane only (Violins I)
and MIDI channel 2 data to a different lane (Violins II), and so forth.
In this way, I can work in my external notation program which is very
flexible and great for creating music during the compositional process,
and occasional, play the song into logic, and then use Apple's orchestra
sounds (using the bounce feature as I am CPU limited with a G4) to create a better realization of what the music might actually sound like.
Thanks,
Sys6 -
Mac mini mid 2011 and logic pro 9 in 64-bit?
Hi,
I have a mac mini mid 2011 with a 2.7HGz intel core i7 processor and 8 GB of RAM. I have been using Logic Pro 9 in 32-bit mode and tried switching to 64-bit mode. I unchecked the "open in 32-bit mode" in the "get inf" section, but logic still opens in 32-bit mode.
My question is: Can my computer run Logic Pro 9 in 64-bit mode???
Thankyou!Hi there jdtay2,
It looks like your model of Mac Mini does have a 64-bit processor according to the article "How to tell if your Intel-based Mac has a 32-bit or 64-bit processor"
Processor Name
32- or 64-bit
Intel Core Solo
32 bit
Intel Core Duo
32 bit
Intel Core 2 Duo
64 bit
Intel Quad-Core Xeon
64 bit
Dual-Core Intel Xeon
64 bit
Quad-Core Intel Xeon
64 bit
Core i3
64 bit
Core i5
64 bit
Core i7
64 bit
As far as opening Logic Pro in 64-bit mode, you will first want to make sure that you have the most updated version, as 64-bit support was added in the v9.1 update. The article below has more information about Logic Pro and 64-bit mode.
Logic Pro and MainStage 64-bit mode FAQ
http://support.apple.com/kb/ht3989
-Hope that helps,
Griff W. -
I changed my logic pro icon in the dock a while ago and cannot locate the original icon to change it back. Any help appreciated.
Tried the get info, delete and it deleted my icon but did not default to the original. ***** that I have to waste time on this issue. I replaced original with a mic. Guess I will have to make do with the mic icon.
-
WB 1.6.0 has not updated even though Logic Pro 9.1.1 is installed
I've posted this also on the Logic Pro forum.
My computer refused to update Waveburner 1.6.0 to 1.6.1 even though Logic 9.1.1 is installed - tells me everything is up to date, which it is not!
How do I get it to comply?
Can I somehow uninstall the 9.1.1 update and the reinstall? and how would I do that?
I'm very confused and any help would be greatly appreciated.
I'm away for the weekend so I won't be around to answer questions, sorry...Fixed - see Logic pro forum for answer....
-
Logic Pro X won't let me play iTunes samples :(
Hiya,
So basically, im quite a new user of logic pro x and im not really sure how it all works so excuse me if im being so dumb about this, but when i try and drag into the space an itunes sample or any sample into an external MIDI it says "The specific number of tracks could not be created. Reduce the number of tracks to create, then try again!"
WHAT DOES THIS MEAN and what can i do to make it work?
Yes, you proberly think this is so obvious but im still compleatly new to this.
Please try and help me! xExternal Midi is for connecting to an external Midi instrument like a Midi keyboard to use it's own sound engine...
Instrument tracks are for using an external keyboard to play Software instruments... that are built into LPX (or to play 3rd party AudioUntil plugins you might buy later)
Audio tracks are for samples, loops, MP3/wave files like from iTunes.. or recording via a Microphone into LPX
What you need to do is simply drag and drop a sample or loop, or music files from iTunes.. into a blank area of the arrange window and a new Audio track will be automatically created for the audio sample or loop or music file.. you are dragging and dropping...
or
Create a new Audio track and then drag and drop a sample, loop or song from iTunes.. onto that new track
As a tip... You probably would best to watch a few videos on YouTube.. (Just search for Logic Pro X) on how to use LPX... and take some time and read the User Guide (Go to the help menu in Logic Pro X's menu bar)
Maybe you are looking for
-
How to find a jar file a class is in
Given a class file, I would like to find out in which jar file it exists.
-
Ipod Touch 4G not recognized on Windows
Hello to everyone! I have an ipod touch 4G 32GB, suddenly my windows cannot recognised my ipod. The problem started when my ipod battery is drained. I tried to charge it using my car charger but didnt charge as it should like before. So when i reach
-
Transferring Ipad videos (home not purchased) to PC ?
How do i upload my home videos from my ipad to my PC ( windows vista) ? When I transfer my photos from the ipad using Windows photo gallery they all show up but the videos dont or dont play. I asked in the Apple store and he said to use itunes to go
-
Multiple GraphicsDevice's scrolling failure
greetings. i plugged in as many searchs as i could think would return this problem and i didn't find anything. getting that out of the way, i just started playing with using multiple GraphicsDevice's and extending the desktop. if i run my swing appli
-
Parse Outlook msg files in ABAP
Hi, I'm looking for a way to parse Outlook MSG-Files in ABAP. E.g. to extract the subject line of a message. In my scenario the files are stored in DMS and have to be processed within a background job. Right now i had no luck in converting the binary