Basic Question VTP Server

Can two VTP Servers exist in a the same VTP domain?

Hi Guys,
Yes it is always recommended to have 2 Servers and properly connected with trunking.
Let say if you have 2 Core switches and 2 Access switches, your choice may be to have redundancy so consider load balance at the same site also.
So Vlans will be serviced by 2 Core switches but there should be difference in STP root numbers.
Exampls : Ensure that all VLAN numbers are specified in the commands
Primary STP root - 4096
Secondary STP root - 8192
Short downtime when implementing these commands
On root bridges (core switches):
(config)# spanning-tree mode rapid-pvst
(config)# spanning-tree portfast bpduguard default
(config)# spanning-tree extend system-id
(config)# spanning-tree vlan x, x, x, priority 4096
(config)# spanning-tree vlan y, y, y, priority
On other non-root (non-core) switches:
spanning-tree mode rapid-pvst
spanning-tree portfast bpduguard default
spanning-tree extend system-id
I am sure you can have peace of mind and no calls during weekends or late nights if you configure port security commands as well.
Thanks and take care.

Similar Messages

Basic Questions from Prospective Lion Server Switcher

I have five servers I am running right now using Windows 2003 Server and various 3rd party packages. Several years ago I became a Mac fan, moved all of my client based stuff to Mac, and now want to start moving my server based equipment to the OSX platform.
I stopped by my local Apple Store, and they had a version of OSX Lion Server running on a MacMini, but couldn't seem to answer the most basic of questions because as their business people stated "We are not Server Certified" ... they recommended I talk to an outside consultant to get these basic questions answered which seems a little extreme.
So I'm hoping the group can help.
(1) I read through most of the Lion Server Advanced Administrative manual. Lion server appears from the manual to do most of what I need. However, when I tried doing some of the functions in the manual on the demo Lion Server at the Apple Store, many of the functions I wanted to do did not seemed to either be installed, or their were buttons missing in the Server App. I do not know if this was a permission level problem, because the account I setup for myself had administrative rights.
(2) In the mail app, it only appeared you could setup one mail domain. It appeared you could setup virtual domains and users through the user app, but not through the mail domain itself?
(3) I could not find any where to enable DNS services. The manual seems pretty straight forward in turning on DNS, but the Lion Server I saw had no DNS services running, or any way to enable them?
(4) Same for mailman listserv type function ... manual seems to be straight forward on enabling under the mail server, but again, no signs of the settings or enabling under the mail service.
(5) Under the mail app, didn't find any way to setup alternative SMTP ports ( I allow now Port 26 besides the standard Port 25 and SSL ports for my users.) ... I find port 26 gets past most firewalls at hotels etc. Didn't see any way to control SMTP authentification too.
(6) Under the Lion Server tech description, it talk about a built in web editor, saw nothing of the kind.
So did the apple store have a limited install or am I missing something that the lion server manual does not match the capabilities of lion server.
Love to get a straight answer before purchasing hardware to replace 5 present machines.
Thank you.
David

Thanks for quick response. Indeed, in hindsight, it appears that they had only installed the Server App, but not the Server Admin tools.
Unfortunately, I am not a system admin, but I played one on TV <grin>
All kidding aside ... I'm willing to learn, but would need most of the basics controlled through the GUI ... and then feel comfortable reading up and editting configuration files and running commands from the Terminal.
On this line, is there good documentation of this, or is this something that you know because you are familiar with Unix? ie something like the alternate port issue ... is this something in the GUI, or something I would have to edit via Terminal?
Just trying to make an informed decision before jumping platforms.
Thanks
David

The difference between VTP server and transparent mode on Catalyst Switch.

Hello
I have a question about the difference between VTP server mode and VTP transparent mode on general catalyst switch.
Basically VTP server mode can create and modify VLAN configuration but actually there is not any VLAN configuration through running-config, is it true? When I checked it on Cat3550, certainly there is not VLAN configuration on VTP server mode. But VTP transparent can create VLAN and configuration but does not synchronize with other switch VLAN status. I appreciate any related information and reason of the VTP server mode specification, thank you very much.
[VTP Transparent mode]
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Transparent
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*omit
vlan 99
name TEST-VLAN
[VTP Server mode]
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*no VLAN like above configuration on VTP transparent mode.
Best Regards,
Masanobu Hiyoshi

Hi mhiyoshi,
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Transparent
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*omit
vlan 99
name TEST-VLAN
The above out put indicates that Vlan is created and then mode changed to transparent. i.e why revision no is 0.
3550#sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 27
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
*omit
3550#
3550#sh run
Building configuration...
*no VLAN like above configuration on VTP transparent mode.
This indicates that vlan never created in server mode nor learnt from another switch as revision no is 0

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

How to set up a basic file sharing server for my small architectural business?

I have no idea if I have posted in the correct area as this is my first forum post within the apple support community!
I have been using a 21.5" imac running 10.6.8 for the past 5 years to run my small home based architectural design business. I have been using the internal hard drive & backing up the necessary data to a simple usb external hard drive. I am now looking to firstly purchase a new imac 27" retina and purchase new autocad lt 2015 for mac software. I am looking to have another imac (my old mac) running in conjunction with the new mac. I want both macs to be able to access the same data and am slightly unsure what is the best way to achieve this.....As my old mac is currently only running snow leopard and an old version of autocad for mac 2011 it wont run on any more recent OS. Essentially i believe I have 2 main options with this.... (1) I Accept that I have to purchase 2 no. autocad lt 2015 licences @ a cost of £2300. Or option (2), I only run autocad on the new mac as this will be the primary station and the old mac used for primarily for admin & accounts. I have also recently discovered that it is possible to rent autocad licences for £300p/a which may also be another option (3)!
I previously had a problem where my hard drive failed on my mac & lost all data on the internal hard drive, luckily I had been backing up all data regularly to my external hard drive and now loss occurred! Obviously with any new system I want to ensure that my data is safe!
I currently utilise about 250GB of data for business operations but this will obviously grow with time.
In the future I would like to have the option of potentially being able to access the network data remotely via macbook pro whilst abroad although at this stage this really isnt my primary objective. Although I believe I could achieve this through apple remote desktop.
I suppose I should provide some information with regard to the required speed of the system...I regularly open 50-100 photos at the same time totalling around 250-500MB. I would like the system to be able to handle this fairly easily.
I have been trawling through forums and to be honest they are totally confusing me. I have also spent time on the phone to the apple business team and have also discussed my objectives with a member of the apple team in store.
There have been various options advised to me and I really do not know which is the most appropriate route forward.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!

Hi sblemings,
Welcome to the community.
I think with your scenario you should ask yourself, how complicated do you want the setup to be and how much time would you have to be able to resolve an issue should one occur with this setup.
All the options that have been advised would work but they come with complexity and therefore time.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!
option 1
Would be a way to achieve what you want, it would centralise your files and you would only need to backup your file server (as long as all the files you wanted backed up were on it). This could be achieved either using the client and sharing various folders or using Server which would give you more options than you would possibly need.
option 2
This is exactly like option 1 except that you wouldn't have to administer another mac however you may limit any future growth.
option 3
This option I probably wouldn't pick, you could achieve this with firewire and use a firewire to thunderbolt adapter (saves you having to buy a new iMac)
option 4
This option would, depending on your RAID level, give you disk redundancy but remember you would still need to back this up, as RAID is NOT a backup solution.
I would also ask is there a pressing need to keep the old iMac in service and complicating things by having a server / NAS? Could you not just transfer all your information over to this and continue with the one backup? I would say that doing it this was would be the simplest way of achieving what you want from what I can take from your question.
As for remotely accessing your data, if you have the right hardware the way to achieve this would be to use a VPN and connect back to your data. However a potentially easier way for you ,would be to use a service like logmein or teamviewer to connect back.
Hope this helps, and by all means any questions please ask.
Dan
How to set up a basic file sharing server for my small architectural business?

Basic questions from a new mozaic owner

I have some very basic questions about how to use the new mozaic 2G mp3 player. I bought the Mozaic because it has a speaker and sleep timer, but I'm finding it to be much harder to use than other mp3 players that I have had (Ipod shuffle, clix etc). This may reflect my failure to look in the right place but I have to say the "help" section isn't much help.
Here goes:
. I download podcasts to listen to during my morning run. WMP provides an easy to find place in its program, "recently added," which allows the user to just work with those files. As near as I can tell, Creative makes you wade through all of your tracks. Is there some way to create a file to which "recently added" tracks, or specific tracks, can be dumped? How about automatic tagging of these added files?
2. I have several thousand pictures on this hard dri've. Apparently, the Mozaic Centrale
Is going to copy all of them, which strikes me as a waste of space. Is there a way to shut this function off? I couldn't care less if a single photo was added to the centrale program (or whatever it's called). Is it really going to duplicate all of the jpg files?
3. I have the Zen Stone plus speaker which has served me very well. I had similar problems working with whatever Zen was calling its media player and wound up using WMP instead. I"d like to take a run at using the dedicated Zen media player....
I apologize for the basic nature of these questions, but the answers weren't obvious to me from the materials I was able to locate.
gba

sineadholly wrote:
Problem with speaker. I read you need to do a firmware update to get the speaker option on your product's menu so i've completely updated it, but still no option to switch speaker on, and won't just come on when i unplug the headphones, any ideas?
what exactly is the model of your Mozaic? Is it EZ 00, EZ 300 or plane ZEN Mozaic?

Some basic questions on File Adapter

Hello all,
I have some basic questions on XI and File Adapter and hope you can help me. Any answer is appreciated.
1. Can I use NFS transport protocol to poll a file from a machine in the network, which is not the XI? Or do I have to use FTP instead?
2. If I understand it correctly - when using the FTP-File Adapter, XI has the role of a ftp client. I have to run a ftp server on my distant machine. XI connects to FTP-Server and polls the file.
Can it also be configured the other way round? The scenario I think of would be: FTP client installed on distant machine, which connects to FTP-Server(XI) and loads up a file. So XI would act as FTP Server.
I know this works, if I install a ftp Server on the computer my XI runs on, and use the NFS-File Adapter to observe the folder. But I want to know, if I need a second, independant ftp server for this.
3. And last but not least: When do I need the active ftp mode instead of passive?
Thanx a lot for your answers!
Ilona

> Hello all,
> I have some basic questions on XI and File Adapter
> and hope you can help me. Any answer is appreciated.
>
>
> 1. Can I use NFS transport protocol to poll a file
> from a machine in the network, which is not the XI?
yes
> Or do I have to use FTP instead?
>
also you can do it
> 2. If I understand it correctly - when using the
> FTP-File Adapter, XI has the role of a ftp client. I
> have to run a ftp server on my distant machine. XI
> connects to FTP-Server and polls the file.
> Can it also be configured the other way round? The
> scenario I think of would be: FTP client installed on
> distant machine, which connects to FTP-Server(XI) and
> loads up a file. So XI would act as FTP Server.
> I know this works, if I install a ftp Server on the
> computer my XI runs on, and use the NFS-File Adapter
> to observe the folder. But I want to know, if I need
> a second, independant ftp server for this.
>
XI cannot act as FTP server, but it is always a client. When XI is reading (File sender adpater) when XIis writing than it is File Receiver adapter
> 3. And last but not least: When do I need the active
> ftp mode instead of passive?
>
It depends on your firewall configuration. The best and the fastests is active mode but not always available.
> Thanx a lot for your answers!
> Ilona

Basic Questions About CSM

Hi,
We have a CSM installed in a 6513 chassis working as our load balancer for web servers. I have a few basic questions:
1. The current default configuration of probes on our switch indicates 2 minutes interval, 3 consecutive errors before marking real server failure and 5 minutes between probes of failed server. This setting results in 10-12 minute switch over delay in case one server fails.
In one of the Cisco papers I read that the default for these parameters in CSM is 8 seconds, 2 retries and 5 seconds, respectively.
My question is what is the default settings for probe parameters and is there any recommendation for a optimal settings? (I am going to use 1min, 3, 15seconds resulting 0.5 to 1.5 minutes delay and want to make sure there is no concerns with that)
2. Does the sticky timeout affect the switch over delay time? My understanding is that sticky timeour applies to the normal condition when all legs are up and in case of a failure, the traffic will switch over regardless of an existing active sticky session. Is this correct?
3. What is the exact definition of a "connection" in a load balancer? Is there any way to estimate or predict the number of connections for a specific traffic load (e.g. number of connection per user)?
Thanks for your response,
Ali

There is an ASK THE EXPERT session currently, if you have more questions, please join us there.
Regarding your current questions :
1/ The default for an icmp probe is 120sec, 3 retries and 300sec for failed.
You can use whatever values you think is necessary for your environment.
However, you need to remember that a probe generates traffic and each probe require process CPU time to send and receive.
With a lot of servers you probably want to avoid low frequency values.
I think your suggested value of 1 minute is ok.
2/ the sitcky timeout does not affect failover.
However, you should be aware that if a server goes dowm, the CSM will send NEW connections to the other servers. But active connection will stay with this server even if down. To change this behavior use the 'failaction purge' command.
3/ A connection is a flow. It is defined by a SRC IP, DST IP, protocol, SRC PORT, DST PORT.
Within a connection you can send 2 bytes or 2 Gig.
So, it is difficult to link the 2 values.
ie: when you load a webpage, if you are using http 1.0 you open 1 connection for every object (text, gif, banner, ...) but with http 1.1 you can download all the same objects in a single connection.
Hope this helps.
Gilles.

Basic questions on iPhone apps. Please help!

Hey I have a few semi-basic questions about iPhone apps. If you know the answers to any of them please respond as it would help me ton. Even if you dont know the exact answer, it'll help me with any input. Trapster is a good example of what im looking for because it uses a map and it receives/sends small amounts of data constantly.
1) How much on average does it cost to hire a group of people to code an app for you. Specifically, how much do you think the app Trapster took to program? Are there any specific other apps you know how much it took to code? I need estimates, because I have nothing. A number like 50,000 would help a ton more other then saying "it depends" .....
2) Apps like Trapster, send and receive small amounts of data all the time? What controls all of this data? Im guessing a server. But what are the server's specs? How many? Price per month?
3) With 3.0 SDK now out, you are now allowed to implement google maps into 3rd party applications. Now I know you cannot use it for turn-by-turn navigation. But can you still use the directions feature already on google maps? Can you still use the search feature to search for a restaurant as well? Or maybe you can just see the map and thats it. Does anyone know exactly what you can use with google maps or know where there is more information? Ive tried everywhere.
4) Just tell me if this is correct: You can add advertisements into your app. On average, for every 1000 times your app gets opened, you get about 1.00-2.00. So if your app gets opened 2,000,000 times you get $2,000 from advertising if you get 1.00/1000. Is that accurate as an average?
5) Since 3.0 now supports push notifications, would you be able to have anything at all running in the backround? For example, on trapster, if you approach a red light camera, the app beeps. With 3.0, if you are on the home screen and approaching the camera, is there a way of getting the iphone to beep even though your just on the iphones main screen or any other screen? Im guessing not because in order to receive the push the iphone needs to know your current location and the location of the camera, which is why the app would need to be running. Incase im wrong is there a way of doing this?
6) If an app is free and does not do advertising, does it make any money? If so how?
Thanks!

>"If an app is free and does not do advertising, does it make any money? If so how?"
Of course.
It's called 'reputation earned'. You negotiate your future based on attention from something (a free app?) that amazes the known world. Could be a book deal after you spend your young/old life crossing the divide - could be a marriage proposal that brings great wealth - could be a cabinet position with a station in a foreign tax haven.
Use your imagination.
As for cost, pull a number out of your hat and then double it...then double it again. Same goes for time, staff and delays.
Ad-ware is so yesterday. Find something more current to scrape off your shoe

Basic questions about JAAS capabilities

I've never used JAAS for authentication or authorization in a Java app before. Can somebody that has (or at least has some experience and knowledge about JAAS) please answer the following couple of basic questions about it? (I know I could probably answer these myself with a few hours of reading.)
1. Can I use JAAS to restrict the users that can execute specific methods of my code?
2. If the answer to #1 is yes, is there a way to programmatically determine if a JAAS login user has the permissions to run a method before actually calling that method. In other words, can I ask something like canUserExecute(method) or do I have to just put the call to the method in a try/catch and catch a security exception of some type?
3. Is it fairly simple to have JAAS authenticate against a Windows Domain or a LDAP server?
4. Are there programmatic ways to add or edit user information in JAAS?
Answer to any of these questions are greatly appreciated. I'll even toss a couple of Dukes to the people that answer each question. Thanks in advance.

You might look at the AfterthoughtSoft-Secure product at http://www.advancedmodelingconcepts.com. It is designed to do just that and will easily allow you to connect to users/group repositories that are in anything from a simple text file all the way up to Kerberos V.
You can contact the author of the product (me) at bart dot jenkins at gd-ais dot com.
bart

Basic Questions about Package Installation

I have one basic question about installing packages.
How can I find out if needed software is already installed without knowing the name of the package?
For e.g. I want to know, if the MYSQL Server is already installed but I don't know the Package name.
How can I find out the package name of needed software?

Difficult.
Assuming the string "MYSQL" appears somewhere in the package
name or the package description, you can grep the output from
"pkginfo". That is "pkginfo | grep -i sql" would list all installed
packages that contain the substring "sql" with either upper- or
lowercase letters.

Basic questions about Notes domino connector

Hi,
I have a very basic question about the Lotus Domino connector for OIM. We have a requirement to provision accounts into the domino mail server and while doing that also update some information directly into a separate nsf file.
I checked the documentation and it seems while configuring an IT resource, we need to give the Mail DB path, and thats the only place where it refers to it.
Could you guys please let me know if this can be done? Can I write directly to a different nsf file, which is not like provisioning to the complete mail server. So the other attributes in the IT resource may not be able to be set up as its just the file I need to provision into.
Looking forward to your response.
Thanks, M

Hello folks, please share your experience working with the lotus notes connector.
Thanks, M

BASIC Questions about JavaMail

Hi Everyone
I have some very basic questions about java mail.
I have a weblogic web server. I think it's version 5 or something like that.
when a user clicks a form on my application sends some information to my database (via my jsp/java program) , I need to send email to a person?
Does anyone know how to do that ?
Could someone please describe the process
Stephen

I would recommend that you first read the JavaMail design specifications http://java.sun.com/products/javamail/JavaMail-1.2.pdf
Then, download JavaMail. It comes with a reference implementation of the API and also very good samples.
Those samples should get you started very quickly on how to send email from Java program.

Basic question inbound / outbound and source service (ASA 5505)

Hi there,
I'm new to the ASA 5505 appliance and have a few very basic questions. Hope I get some responses and not flamed for being a total newbie. :-)
Inbound versus outbound: I'm having a difficulty understanding the inbound versus outbound terminology. Can somebody please clarify? For example, if I want to block all http traffic from hosts on the inside to the internet but allow all https connections, intuitively I'd configure a rule to block outbound (= outgoing) traffic for the http protocol for the inside network. However, it seems as if I have to add this rule for inbound connections. Why is a connection from a host on the inside to a web server on the internet considered an inbound connection on the inside interface?
When I add a rule, I've got a "service" field and a "Source Service" field in the "More Options" section. What's the difference? Do I have to set both to the same value?
Your help is greatly appreciated.

Hi Ralf,
Yes, if you put a deny http, it would drop all packets for destination as http port, but be mindful that when you apply an access-list on your inside interface, it automatically activates the deny ip any any right at the bottom, you would be able to see that in the ASDM. So for the users that need be allowed access to the http, needs to be explicitly allowed http access, so your correct configuration would be:
access-list inside_access_in deny tcp host 192.168.1.1 255.255.255.255 any eq http
access-list inside_access_in permit tcp any any
access-group inside_access_in interface inside
This would block 192.168.1.1 to go to internet, but allow all others.
Second question, i haven't chceked the ASDM, but just remember out of memory, that this service option should be the protocol, whether ip,tcp,udp,esp or gre etc.
Moreover always try to block connections as closed to the source as possible, this would mean, if you want to filter traffic going from inside to outside, that should be done on the inside interface not outside.
Thanks,
Varun Rao
Security Team,
Cisco TAC

MapViewer - A team of newbies and definitely basic questions...

Dear All,
We are a team of programmers who are very new to MapViewer. We are an experienced team of GIS programmers, however, we find difficulty in applying known functions to MapViewer. It's a great application, but a lot of unknowns.
We have very basic questions, as well as advanced ones. I would like to summarize them as follows:
1. How can I let the map to be zoomed into a specific feature?
2. How can I execute a query to find a specific feature?
3. How can I execute network analysis query to find the shortest path or paths between two or more nodes?
4. How can I find out the nearest node to the location when user clicks on an arbitrary location on the map?
5. How can I execute generic queries, without (this is important) need to send/receive XML queries?
6. The bottomline is: we just want to use ready made functions to make it as easy as possible.
Anyhelp is greatly appreciated. We are stuck with the basics of MapViewer (Oracle Maps).
Please help us find the light :)
Best regards.
Desperate MapViewer Team!

Here are some quick answers, hopefully they are not too late.
1. You will construct a theme (mostly a dynamic one) that contains the specific feature, then call the theme's setBoundingTheme(true). Typically what we see people do is: a) create a dynamic theme with a query that selects a set of features; b) create a FOI layer based on the theme (MVThemeBasedFOI); c) call the setBoundingTheme(true) on the FOI layer. The end result, is that MapViewer will process your query and return the FOI data to the Oracle Maps JavaScript client, which will zoom the map to include the set of features in the FOI layer. Check out Oracle Maps tutorial #35 for an example.
2. This is partly answered above. Basically you will construct a theme with a dynamic query string. You may want to check out tutorial #37 which finds out and displays the buffers around a set of points; the buffers are constructed via a SQL query at run time.
3. This is not really a MapViewer question; rather, you may need to consult the Oracle Spatial routing engine XML API; the gist is you send the XML route request to the routing server, which returns a set of coordinates for your directions, which you can construct (MapViewer) FOI objects out of and display them on the map.
4. I'm not sure our routing engine or network data model API has such a function ready for use; what you can do is if you can formulate the SQL query string (with the current location represented as a binding variable), then you can create a theme out of this query condition, and simply supply the location at run time to get the set of nodes.
5. Can you please elaborate on what do you mean by generic queries? A simple usage scenario will help.
6. We understand; there are quite a lot of things that can be made easier out of the box and we are working towards that. in the mean time, just ask questions if you have them; and always check out the Oracle maps tutorials first (actually reading the MapViewer primer article should be the absolute first step :) ).
thanks
LJ

Basic Question VTP Server

Similar Messages

Maybe you are looking for