Basic Question, White box while loading

I am sort of a newb at flash. I have an animation for a site I am working on, When it first loads the viewer sees a white box before the animation. What do I do to eliminate that problem?
For reference this is the page I am working on.
http://www.2ndlookgraphics.com/CMS/index.html

I think that is the answer. I tried it in a browser I had not been using so I believe the cache was clear and I did not get that white box. If you would I would appreciate it if you could try it to to make sure it is fixed.
I sure do appreciate your help!!!
-- Cathy

Similar Messages

Safari flashes white boxes when loading pictures or video, distorts text

Hi,
I have Safari 3.1.2 and a lot of times when I look at a photo on a flickr page, when the photo loads it flashes these annoying white boxes everywhere. And when I watch a youtube video it will flash white sections on them. Also, when I'm scrolling through an article, the lines will double up and distort. If I restart my computer it will adjust to normal, but the after a while it will start up again. I've singled the problem down to Safari because Firefox does not have this problem. I guess I could just use Firefox and say sayonara to Safari? Any advice?

I have exactly the same problem with browsers, iPhoto, and also text breaking up when scrolling up and down (in Mail, for instance). I also have a Macbook Pro (15", 2,4ghz, GeForce 8600M graphics).
I have heard about people taking the unit back to Apple and having the graphics card replaced, and some people talk about it being a video driver issue, but this has been going on for me since at least 10.5.2 (that's when I first noticed it as a problem) and if it's a software problem it's taking a long time to fix it!

Eliminating 'the big white box ' on load

In the second or two before my flash page appears with normal
preloader etc, the size of the flash element is always shown a s a
big white box over the surrounding black page...my background color
is set to black on both the flash and html page containing it and I
try to leave first frame clear of elements that would slow
load...is there an easy fix for this unsightly hiccup to my
intro?

Try to set the flash window at "transparent, windowless" at
the HTML tab in export options.

White box under Loader Component

I am using the Loader Component to load my images as they are
viewed in my file.
Most of my images are ok, but some have a white box
underneath of them.
I'll have an image that is like 300 pixels wide and 100 tall,
but it looks like a 100 wide by 200 tall white box is behind the
image. It does this with random images using the Loader COmponent.
any ideas what is up or how to fix it?

weird solution. i copied all of my keyframes into a new
document and when testing the movie the box problem does not
appear.
is flash got bugs?

Simple basic question on attribute data load for Master Data InfoObject....

Hi
I am a bit confused & wanted to have some clarification on the following:
1) For loading Attributes data to Master Data InfoObject, we load it through Data Source of Type Master Data Attribute.
But what i did, i created Data Source of type Transaction data and using the same Excel file, i was able to create transformation with Matser data Attribute and was able to load the data.
This shows i can use Data source of type either master data attribute OR Transaction Data doen't matter while loading into master data attribute. IS THIS TRUE?
2) I have 2 master data infoobjects (Test1 & Test2). I made Test2 as an attribute in Test1.
My question is while loading Master data for Test1, will it also load the data into Test2 if it doen't find respective data in Test2?
(i did all the transformation as per need.)
Waiting for your reply....
Thanks...

HI Harpal,
1. Did you make a transformation between attribute data source from source system other than flat file and DSO?...
I think PC File is flexible in this aspect..
2.While loading Test1 the infoobject Test2 will get loaded only if it is a navigational ttribute..(You can see this by refering the SID Table)
Please also note that it does not load Test2 attributes.
regards,
Rakesh.

White background while loading?

There's a white background visible as my flash swf loads. The
background is set as the same color as the page background. Is
there a way to fix this? Does my flash swf just need to load more
quickly?
http://www.aprilaromatics.com/AAindex.html
Thanks!
~*Beth

Hi Beth,
it is the way I guessed, you don't have the bgcolors defined
in your object and embed tags. I have done that already. Should I
post the code here for you to copy and paste, or email you the
file?
BTW.: This would be a good moment to incorporate something
like swfObject to circumvent the "Active-Content" issue and add
flash detection and a non-Flash alternative, while we are at it.
:-)

Can I get rid of the white box behind my swf file?

I would like for the space behind my swf animation to not appear as a white box while the browser is loading the swf but rather show what is on the page behind the loading file.
I believe someone had once told me what to do to prevent this but I cannot find this info now.

Thank you. I knew it was something simple. I think I used to
have to enter it as a paramenter but now in CS5 there is
a w mode setting. I appreciate your help..

HT2506 OS X Preview: Insert a white box with no border?

Hello, I have a PDF document in Preview (OS X Lion), and I'm trying to insert a "whiteout" area--basically a white box with no border or shadow. However, no matter what I do, I can't seem to create an annotation rectangle without some kind of border showing up. Actually, it looks more like a shadow than a border. Am I missing something? Is this possible with Preview?
Thanks!

This drives everybody nuts, and Apple does nothing about it. My guess is there's somebody with a patent -maybe Adobe- forcing them to keep the damned shadows.
The only decent solution seems to be the free app Skitch. Reveiws are 100% negative on the latest version, which has been stripped of features (Adobe, again?), but you can still get the older versions at http://www.oldapps.com/mac/skitch_for_mac.php I use version 1.0.12, which works with Mountain Lion.
There's also GIMP, which is a powerful program but has a learning curve like the Matterhorn.

On my MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks.

On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!

I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Photos from the Internet will not load correctly. I get white boxes with blue question marks inside. This has only been happening for the past 3 weeks so I'm not sure why it is happening.

Yes - email & text work fine but when I use something like Google Images or search a blog with imbedded photos I get the empty white boxes with question marks. If I click the question mark it opens the photo but I can't possibly do that for EVERY image on EVERY page I search!?!?! I've rebooted the iPad & my wireless card several times but neither action helped. Have any clue what I should do now?

White box appears while switching between two desktops

Hello all,
Since few weeks I have a problem when I switch between two Desktops. Everytime I switch between them a white box appears in the left corner of my screen (see screenshot).

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

While loading ITunes Igot this messege, Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. My question is, How do I verify if I have sufficient privileges?

While loading ITunes I got this messege, Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. My question is, How do I verify if I have sufficient privileges?

Hello hurleygirl63,
Thank you for the details of the issue you are experiencing with iTunes. I recommend following the steps in the article below:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thank you for using Apple Support Communities.
Best,
Sheila M.

White box loads over web pages

Upon loading up any website i am also greeted with a white box that covers almost all of the screen with a X in the top right, as if it was an advertisement but it's just white. it happens on every page e.g. Amazon, Youtube, Facebook. At first i thought it was a virus but Avast detects no threats, I have also tried restoring my Laptop to an earlier date, and it still occurs. I have a picture but I don't know if i can post it on here so there's a link:
http://imgur.com/7a612L7
any help would be greatly appreciated
Thanks

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

White Box appears for a second before loading (Preloader?)

Hello,
This is my second post in 2 days (sorry). I am working with
Flash MX. I am building a site and I have build a template of sorts
(menu layout & background image). I was originally going to try
to load external swf (which was yesterday's issue and now resolved)
but it didn't quite give me the effect I was looking to achieve.
So, I am now linking to each page using flash buttons. I drop
a .swf it's own HTML page (home, contact, etc.). I am not sure if
this is the best way to do it, but it has worked in the past.
However, I am getting a white box where the swf sits as I navigate
from page to page.
Is this because I need a preloader? I have the background
color in my .fla file set to black. If not, how do rid of the box?
Thanks.

Hey, I couldn't wait to try this out. I pasted your code in
and I am still having the issue. Maybe it's just the way I have set
this up. I like having individual swf on each page. Not sure where
to go from here. I really do appreciate all your help in sticking
with my issue. Sorry if I am misunderstanding things. As I learn, I
want my work to look professional.
Also, at what point do I use a preloader? Is it always
needed?
Here is my HTML code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
<title>Untitled Document</title>
<script language="JavaScript" type="text/JavaScript">

</script>
<style type="text/css">

</style></head>
<body>
<div id="Layer1" style="position:absolute; width:200px;
height:115px; z-index:1; left: 52px; top: 0px;">
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,29,0"
width="978" height="723">
<param name="movie" value="untitled.swf">
<param name="bgcolor" value="#000000" />
<param name="quality" value="high">
<embed src="untitled.swf" quality="high" pluginspage="
http://www.macromedia.com/go/getflashplayer"
type="application/x-shockwave-flash" width="978" height="723
bgcolor="#000000""></embed>
</object>
</div>
</body>
</html>

Help: White Box "movie not loaded" in banner ad using AC_RunActiveContent.js

I am having trouble with a banner ad displaying all white when I try to insert the code into my website.
I get a white box and when you right click it says "movie not loaded"
I am using the AC_RunActiveContent.js file
Here is the HTML code.
Any help is greatly appreciated.
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>728x90</title>
<script language="javascript">AC_FL_RunContent = 0;</script>
<script src="http://www.dewalt.com/dwassets/other/flash/mundial/AC_RunActiveContent.js" language="javascript"></script>
</head>
<body bgcolor="#ffffff">



<script language="javascript">
    if (AC_FL_RunContent == 0) {
        alert("This page requires AC_RunActiveContent.js.");
    } else {
        AC_FL_RunContent(
            'codebase', 'http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0',
            'width', '728',
            'height', '90',
            'src', '728x90',
            'quality', 'high',
            'pluginspage', 'http://www.macromedia.com/go/getflashplayer',
            'align', 'middle',
            'play', 'true',
            'loop', 'true',
            'scale', 'showall',
            'wmode', 'window',
            'devicefont', 'false',
            'id', '728x90',
            'bgcolor', '#ffffff',
            'name', '728x90',
            'menu', 'true',
            'allowFullScreen', 'false',
            'allowScriptAccess','sameDomain',
            'movie', '728x90',
            'salign', ''
            ); //end AC code
</script>
<noscript>
    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0" width="728" height="90" id="728x90" align="middle">
    <param name="allowScriptAccess" value="sameDomain" />
    <param name="allowFullScreen" value="false" />
    <param name="movie" value="http://www.dewalt.com/dwassets/other/flash/mundial/728x90.swf" /><param name="quality" value="high" /><param name="bgcolor" value="#ffffff" />    <embed src="http://www.dewalt.com/dwassets/other/flash/mundial/728x90.swf" quality="high" bgcolor="#ffffff" width="728" height="90" name="728x90" align="middle" allowScriptAccess="sameDomain" allowFullScreen="false" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
    </object>
</noscript>
</body>
</html>

Both of the files (js and swf) appear to exist where your code has them. Does the html page live in the same folder as the swf?

Basic Question, White box while loading

Similar Messages

Maybe you are looking for