Basic questions about Notes domino connector

Hi,
I have a very basic question about the Lotus Domino connector for OIM. We have a requirement to provision accounts into the domino mail server and while doing that also update some information directly into a separate nsf file.
I checked the documentation and it seems while configuring an IT resource, we need to give the Mail DB path, and thats the only place where it refers to it.
Could you guys please let me know if this can be done? Can I write directly to a different nsf file, which is not like provisioning to the complete mail server. So the other attributes in the IT resource may not be able to be set up as its just the file I need to provision into.
Looking forward to your response.
Thanks, M

Hello folks, please share your experience working with the lotus notes connector.
Thanks, M

Similar Messages

Basic Questions About Compiling Source

Hi!
I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/ - and during the install process, everything will be installed in its proper dir, right?
How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
Once you do figure out which compiler to run, the process is supposed to go like this, right?
./configure
make (or whatever)
make install
But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
$ ls ~/Downloads/arm
ChangeLog
README
armrc.sample
setup.py
LICENSE
arm
install
/src
Maybe it's that 'setup.py' file? What are you supposed to do?
Of course, it's not only this one that's given me trouble. Sometimes the readme will say I have to edit a certain file for my system. Are there just a few standard changes you always make? Or is it...how can I put it...complicated? How do you find out what's needed in those cases?
OS 10.6.8
Xcode 3.2.4
Python 2.7

sudont wrote:
I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
This is the place for UNIX discussions. If you have developer-related questions, there is a forum dedicated to that as well: Developer Forums
First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/ - and during the install process, everything will be installed in its proper dir, right?
Yes. Hopefully the project you want to install follows standard conventions. If so, you can do "./configure", then "make", and finally "sudo make install" to install the software into "/usr/local".
How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
The make file will figure that stuff out.
Once you do figure out which compiler to run, the process is supposed to go like this, right?
./configure
make (or whatever)
make install
Yes, with the addition of "sudo" before "make install" because "/usr/local" is owned by root.
But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
$ ls ~/Downloads/arm
ChangeLog
README
armrc.sample
setup.py
LICENSE
arm
install
/src
arm? You mean "arm (anonymizing relay monitor) - Terminal status monitor for Tor relays." You really don't want to be messing with that stuff. The only people involved with Tor that are trustworthy are US Navy intelligence who have their own uses for it. If you don't understand it as well as they do, best stay away.

Basic questions about macbook pro + external monitor

Hi,
I have some very basic questions about using a Macbook Pro + external display. I don't actually have them but need to know how things works.
So, here they are:
1) Can I use the external display as the main display?
2) Will the external display run with its resolution or with that of the mbook pro?
3) Somewhere I read that you cannot keep the macbook pro open and get the full resolution of the external display. Is that true ?
4) Is it dangerous to keep the mbook closed while using the external display?
5) Does the usage of the external display impact on mbook performance?
I know...a lot of questions , but would be nice if someone could help me.
Thanks.

Hi - I am presently using an external display.
To answer your questions in sequence:
1. Yes you can use the external display as your main display. The way to enable that mode is to put your MacBook Pro to sleep, attach the external display. Wake up your MBPro with the lid closed and you will see the external display as you main display. You can alternatively set the external to "Mirror" your notebook by using preferences/display.
2. The external display will run at its resolution although you can adjust and calibrate it using Preferences/Display.
3. Not true. You get max resolution on both displays. Of course you may have to tweak as mentioned above.
4. Not at all. I use this mode all the time. Just make sure you initially set up as mentioned above and your LCD on the MBPro will stay off.
5. I have not seen any performance degradation whatsoever.
Hope this helps.

Basic questions about CISCO IOS

Hi everybody, Jack here,
I have some basic questions about the Cisco IOS, could someone help me addressing some of them please? Any feedback would be greatly appreciated.
Basically, I have two IP addresses assigned by our Cable ISP. From what I understood you can configure a Cisco router for multiple IP addresses using the IOS, thereby allowing someone like myself to take advantage of having multiple IP addresses. This may seem unnecessary to some, but I've always wanted to put the 2nd IP address to use, since after all, I've been paying for it.
I was just wondering if someone could confirm that what I'm hoping to accomplish is indeed within the capability of the Cisco IOS (i.e. Fully utilize my 2 IP addresses). As well, if someone could kindly suggest a decent CISCO router for online gaming home use that would be super awesome!
Thank you all so much for reading through the wall of text:)
Jack

Jack
Certainly using multiple IP addresses is in the capability of Cisco IOS routers. How they can be used depends on the relationship of the IP addresses. I am assuming that we are talking about IP addresses assigned for the user to use and that the IP address for the ISP connection is not one of these that we are talking about.
If both of the IP addresses that you have been assigned are within the same subnet then you would assign one of the addresses to the router interface to establish IP communication between the router and the ISP and to enable Internet connectivity for the devices inside your network that will use the router as their gateway to the Internet. The other address that is assigned can be used for address translation and in particular for static address translation which would make one of your devices inside to be reachable for connections initiated from the Internet (if that is something that you might want to do).
If the addresses that are assigned to you are in different subnets then you could assign one address to the outside router interface and assign the other address to the router inside interface. Or you could use the second address for address translation.
I do not have much expertise with online gaming, but I would think that either the Cisco 881 router or the 890 router might be appropriate for you. If 100 Mb connection is sufficient then probably the 881 would be the one to look at. If you need Gig connection then look at the 890.
HTH
Rick

Basic questions about Network Licence

Hi,
Before buying, I have some basics questions about the network licence of Acrobat
As an example, if I buy 5 network licence for 20 users.
If the 5 licence are used or if one user is outside and can't access the licence serveur, is there still some basic features available? I mean, is there a "acrobat reader" part that still allow users to read pdf?
In the same kind of problem, if 10 users are using Acrobat just for reading pdf file and that a user now want to use acrobat to create a pdf, is there still available licence or the 5 firsts that are just reading have take the 5 licences available?
Thank you for your answers

This is a user to user forum, with the space provided by Adobe
This is not official Adobe support... I think you need to contact Adobe

Basic questions about JRE installation

I am using NSIS to make a installer, which insalls the JRE 1.5, JMF, Javamp3, then our own software packages.....
Firstly I have some basic question about the general installatio/deinstallation.
1 Why sometimes is it required to reboot computer for the installed software to take effect, e.g.
JRE 1.5. If not, what doest NOT take effect? (Actually in many cases, it seems to work even if not reboot the computer).
Regarding the JRE 1.5,
I am wondering:
1 where is the registry entry written in windows?
2 how to make the JRE installation process silent?
Thanks !

Just click on this link http://mindprod.com/jgloss/registry.html.

One very basic question about inheritance

One very basic question about inheritance.
Why we need inheritance?
the benefit of inheritance also achieve by creating instance of base class using it in other class instead of extending the base class.
Can any one please explain why we are using inheritance instead of creating object of base class????

SumitThokal wrote:
One very basic question about inheritance.
Why we need inheritance?
the benefit of inheritance also achieve by creating instance of base class using it in other class instead of extending the base class.
Can any one please explain why we are using inheritance instead of creating object of base class????What did you find out when you looked on Google?
One example of inheritance comes in the form of a vehicle. Each vehicle has similarities however they differ in their own retrospect. A car is not a bus, a bus is not a truck, and a truck is not a motorbike. If you can define the similarities between these vehicles then you have a class in which you can extend into either of the previous mentioned vehicles. Resulting in a reusable class, dramatically reduces the size of code, creates a single point of definition, increases maintainability, you name it.
In short there are thousands of benefits from using inheritance, listing the benefits could take a while. A quick Google search should give you a few hundred k if not million links to read.
Mel

Basic question about storage and safety in iMovie '11

A very basic question about storage and safety:
I want to keep a backup of my raw footage on my external hard drive prior to begin working on the movie in iMovie. I want to do this:
1. Upload the digital files from my camcorder to my Desktop *(as opposed to iMovie)*
2. Duplicate that footage/clips.
3. Put the duplicate clips/footage into a folder labeled with the name of that footage (like "Fun At the Dentist" or "Jimmy Learns How to Yodel").
4. Drag the folder with the footage/clips into my external hard drive into a pre-existing folder titled "Backups/duplicates of all of my raw footage/clips." This big granddaddy folder will house all of the child folders of different movies.
5 Then, open up iMovie '11 and import the raw footage/clips from my Desktop rather than from my camcorder.
6. Then I want to make a duplicate of my finished movie and put it in my external hard drive in a "Finished Movies" folder.
I know that the original raw unedited footage will always be in iMovies '11 but I want the original to also exist immediately accessible in my external hard drive.
QUESTION:
Is this viable? Is it wise? (I know it goes an extra unnecessary step, but aside from that.)
*Do you have any precautionary advice?* Should I do something in my iMovies '11 preferences? What?
In earlier years with iMovie '04 or '06 (cannot recall) I made many novice errors and ended up losing audio to my finished movie. I also lost footage.
This time around with iMovie '11 I don't to make such novice, ignorant errors.
Thanks so much for any comments to this question.
-L

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Basic question about NR filter

Very basic question about the (perhaps oversimplified) interface of the noise reduction filter.
Does anyone know definitively whether the first "Strength" slider is a master control for the filter overall (i.e. it controls the power of all other sliders below it), or whether it only affects an individual parameter (such as what might be perceived as luminosity-based noise, rather than color noise)?
In other words, if Strength is set to zero, but Reduce Color Noise is set to 100%, does the color noise reduction effectively become zero or 100%?
Neither the Help Menu nor three of the aftermarket books I have definitively addresses this. There are further redundancies regarding this "Strength" slider when advanced mode is turned on: for instance, if Strength on the "front" panel is set to 0, but 9 on the individual channel panels, what is the effective strength?
Thanks in advance -

Yes I'm sure it will work great for you.
The iFrame format is something Apple has come up with. The reason for its existence is unknown to me so I can only speculate. But it seems to me that Apple "invented" this format in order to have devices such as Ipod/Ipad/Iphone/Ixxx create clips that are editable on consumer hardware such as already mentioned devices but also standard Mac computers, without the need for format conversion.
iMovie converts most input formats during import, which takes a lot of time, and this need for conversion often comes as a surprise to most people new to home video editing.
iFrame has a resolution of 960x540 which is long way from the common standards of 1920x1080 and 1280x720. If your end target is YouTube however, this may not be too bad though. However if you intend to go with YouTube HD, you may find iFrame footage to look wrong since they are effectively upscaled to a higher resolution.
Technically iFrame uses the H.264 algorithm, a smaller frame size (960x540) and a rather low compression scheme. This will result in large files, but the plus side is that the files are ready for editing without the need for any conversion and iMovie will natively edit the files.

Some basic questions about DAC

Hello
I am just starting to use DAC now and I have some basic questions about DAC..
1: How many different kinda image tables are there, what are they used for?
2: In order to check which ETL mapping with in the same execution plan is taking a long time, what to do? I mean is there a table that stores such info?
3: How to determine which ETL task to run after and which after?
4: Is subject area always map to the Informatica workflow folder? Or what should subject area be?
Please shed some lights on it, deeply appreciate!
Thanks

Hi,
I have problems to understand you question but will do a try:
From a logical point of view objects can be only serialized reasonabely when they have a state of it's own which can be reestablished at a later point in time and space without further dependencies.
F.E. a "serialized file" would NOT make much sense cause it depends heavily on the state of the underlying file system.
You can't expected that is can be deserialized at a later point of time (physical file refered may not longer exists) or on another machine, where the serialized object was transported to.
Technical - at zero approach - it's more or less trivial. Simply implement Serializable and all non static, non transient fields of your object will be serialized automatically.
But there is a couple of pitfalls, you should study documentations regarding this feature.
Hope this helps
Martin

Basic questions about Infocube

Hi, everyone.
I got very basic questions about infocube data handling.
With infopackage, I extracted all the data about employees from R/3.
But there were some mistakes during inputting employee data, like positions,
so I just extracted those employees data once more.
Now I have two requests in infocube, where the first one has some wrong data.
Is there any solutions about this?
I might got it all wrong, so as beginner, any suggestions and explanations will
be grateful.

Hi,
You can manually delete the earlier request by going in the Manage option of the cube. select the request and click on delete icon at the bottom.
Other option is to make setting in the Infopackage to delete similar or overlapping request.
Data target tab --> 6th column Automatic loading / deletion of similar request. --> click on the blank icon --> you will get a pop-up --> select the radio button - "delete existing request" --> Select Conditions --> Infosource are same, datasource are same and source system are same, --> selections are "Same or More Comprehensive "
Assign points if useful
Regards
Venkata Devaraj !!!

Basic questions about JAAS capabilities

I've never used JAAS for authentication or authorization in a Java app before. Can somebody that has (or at least has some experience and knowledge about JAAS) please answer the following couple of basic questions about it? (I know I could probably answer these myself with a few hours of reading.)
1. Can I use JAAS to restrict the users that can execute specific methods of my code?
2. If the answer to #1 is yes, is there a way to programmatically determine if a JAAS login user has the permissions to run a method before actually calling that method. In other words, can I ask something like canUserExecute(method) or do I have to just put the call to the method in a try/catch and catch a security exception of some type?
3. Is it fairly simple to have JAAS authenticate against a Windows Domain or a LDAP server?
4. Are there programmatic ways to add or edit user information in JAAS?
Answer to any of these questions are greatly appreciated. I'll even toss a couple of Dukes to the people that answer each question. Thanks in advance.

You might look at the AfterthoughtSoft-Secure product at http://www.advancedmodelingconcepts.com. It is designed to do just that and will easily allow you to connect to users/group repositories that are in anything from a simple text file all the way up to Kerberos V.
You can contact the author of the product (me) at bart dot jenkins at gd-ais dot com.
bart

Basic Questions about Package Installation

I have one basic question about installing packages.
How can I find out if needed software is already installed without knowing the name of the package?
For e.g. I want to know, if the MYSQL Server is already installed but I don't know the Package name.
How can I find out the package name of needed software?

Difficult.
Assuming the string "MYSQL" appears somewhere in the package
name or the package description, you can grep the output from
"pkginfo". That is "pkginfo | grep -i sql" would list all installed
packages that contain the substring "sql" with either upper- or
lowercase letters.

BASIC Questions about JavaMail

Hi Everyone
I have some very basic questions about java mail.
I have a weblogic web server. I think it's version 5 or something like that.
when a user clicks a form on my application sends some information to my database (via my jsp/java program) , I need to send email to a person?
Does anyone know how to do that ?
Could someone please describe the process
Stephen

I would recommend that you first read the JavaMail design specifications http://java.sun.com/products/javamail/JavaMail-1.2.pdf
Then, download JavaMail. It comes with a reference implementation of the API and also very good samples.
Those samples should get you started very quickly on how to send email from Java program.

Few basic questions about database administration

Hello,
I have a few basic questions about database administration.
1. I switched one of my oracle instances to archivelog mode. I just cannot locate the archive log files on my windows system. The %ora_home%/ora92/database/archive directory is desperately empty...
2.What is the tools01.dbf datafile used for?
3.What is the undotbso1.dbf datafile used for?
Thanks in advance,
Julien.

1. The archive log location needs to be specified in your init.ora file. By default, Oracle will place the archive files in either ORACLE_HOME/dbs or ORACLE_HOME/database.
2. The tools01.dbf file belongs to the tools tablespace which should be set as the default tablespace for system. It primary purpose is to hold Oracle Forms and Reports database objects, however, it should also be used for holding other non sys database objects such as the perfstat (statspack) or other third party database schemas e.g. quests sqllab.
3. undotbs01.dbf file belongs to the undo tablespace.

Basic questions about Notes domino connector

Similar Messages

Maybe you are looking for