Basic questions. Accessing documents

Hello,
I have few very basic questions. I don't see an obvious way to access documents from within any CS6 app. Is this something that should be possible, or do files have to be uploaded/downloaded from the browser interface? I downloaded and installed trial versions of the Master Collection. When CS6 became available, it seemed to know I was a member because it no longer prompts me to "continue trial." However, several apps show as not installed in the download manager accessable from within CC.
Also, what does the subscription include as far as website publishing. Five sites is what the literature says. Is this five trial sites. I have a site I setup as a test. It's accessable through xxxx.businesscatalyst.com, but when I click "push to live" I am promoted to choose a monthly plan. I really don't need the service, but just curious what level is included.
Also, also, while I can access the creative cloud and it shows 20gb and all apps, my account shows nothing about being a Creative Cloud member.
Sorry for these basic questions.
-Hugh

Hi David,
Getting a lot of email time with you. Thank you for being helpful. I have one Adobe ID. Answers to your questions below:
For accessing documents within the CS6 apps, you could go through cloud storage if you wanted to transfer between locations or computers but saving your work to the computers HD is the same as past versions.
OK, I must be dense. I don't see an obvious way to transfer. Don't need a full tutorial, just point me to a menu item or window tab or anyplace. I'll figure it out from there.
I haven't tested using the Master Collection myself but I would be curious if you launch one of the products which show as not installed within the Adobe Application Manager window does it show as being a trial still? Does just launching make any difference?
No, the apps launch without the 30-day trial notice. Everything seems to be working normally except for not showing as installed through the CC site.
I did install the Master Collection trial Thursday night expecting the launch of CC to be delayed or on California time (East Coast here). Launched a few apps before discovering access (actually a little before midnight--good job). It seems the apps I launched before the service went live are the apps that display as not installed. But not 100-percent sure.
For the website question, I was wondering if it might be because you weren't signed in to Muse with your Adobe ID, it should be the same one as Creative Cloud.
I was promoted to login at the Business Catalyst site from the "manage" link in CC (same with typekit--every time I access)--same (and only) Adobe ID I have. I was also logged in through Muse. I'm sure of that.
Did you receive an email saying that your subscription service was activated? Are you logged into the Creative Cloud website with the same Adobe ID? It almost sounds like you are not signed in or the subscription is not activated?
Other than a few phone calls and online chats with folks at Adobe, this forum is the only (semi) official notification I've recieved. When I called the Customer Service number, the rep told me it would automatically convert (which it seems to have done since I can access and download). But the rep (nore online chat sessions) ask for my Adobe ID.
I checked my spam folder, etc., to make sure nothing was missed from Adobe. Nothing received. As an FYI, I did get the auto notice telling me I was charged for the monthly Design Premium 5.5 subscription on May 10 (just like clockwork).
Also try clearing your browser cache, closing and reopening the browser, oddly enough I've heard that can make a difference in some cases.
I'll try that. Also read elsewhere that uninstalling and reinstalling has helped with other issues. Also read about deleting config files to cause CS6 to reset. Haven't tried it. Would like to know my subsciption status first.
OK, so another basic question, How do I activate my subscription. Call customer service again? Some place on the website? Friends at Adobe ;-)
Thanks much.
-Hugh
BTW, I'm very happy with CS6 so far. Being super productive since Friday night. Not getting much sleep, but having a lot of fun learning/developing some pretty cool stuff.

Similar Messages

Basic question on Adobe document services

Hi
We have a ECC50 instance - the basis component of which has been given to us from our headquarters that has stripped off the J2EE server ( i.e given a WAS640 with just the ABAP runtime installed ).
Now, we are planning to use Adobe Interactive forms - for simple applications - like our field sales able to create a sales order by entering data -offline and submitting it to our ECC50 box.
Now, question is - the ADS - that provides runtime services - does it need a J2EE server - or can I assume that this version of our ECC50 has ADS installed on the ABAP stack - and we still go ahead and plan using Adobe Interactive Services assuming that ADS ( PDF document object )would be available to our ABAP environment to process a PDF form that comes in from field sales ?
Thanks in advance for answering this very basic question.

Hello Karthik,
the ADS only runs on the Java stack, so yes you will need to have SAP Web AS Java installed to deploy and run Interactive Forms.
The functionality of ADS can then be accessed both from Java and ABAP applications.
Cheers,
Matthias

Access Management Basic Questions

Hello, I have several basic questions regarding the access manager. Short answers are OK for me.
1) Is there a build in self registration process for end users
2) Where Access Manager store it's users data (AD, Ldap, Identity Server ? )
3) Does Access Manager come standalone or it rely in SUN IdM
4) Does Acess Manager has it's own workflow engine or can rely on IdM
5) What is the programming language XPRESS or any other.
Thank You !!!!

Hi Shivaram, thank you for reply.
Regarding the 4. What if I want to create the workflow for End User self registration, For example user must be approved by manager. Is this should be done by IDM? Does that mean that all self registration process will be moved to IDM?
Regarding the 5 ,I meant is there a possibility to write my own code which will expand the Access Manager capabilities .Like make some changes in AM user creation or deletion process? Sending notifications to end users etc. Is there any API or programming language for this?
Thank You!!!
Alex.

Assorted basic questions

Hello,
I have recently bought an iPhone, and after reading the User Guide I have many small basic questions. I'm using an iPhone 3GS together with Windows Vista. I wouldn't like to clog this forum with multiple topics about small things, hence everything being here:
1) Is it possible to save .pdf files to the iPhone? I have limites web access, and I often use a few pdf files. I would rather use storage space for them than downloading them all the time (even with cache). If this isn't possible without external applications, which reliable application can save documents such as pdfs and docs to the iPhone?
2) The iTunes Store is not available in my country for buying movies. Given how I'm using Windows, is there any way to transfer movies to my iPhone? Whenever I try dragging a movie to iTunes on my computer, nothing happens.
3) In order to access my work's network from outside computers, we need to set our browsers with specific proxy configurations. Is it possible to set a proxy with Safari? Is there any way of doing that at all with the iPhone?
4) I have began using iTunes in order to move my music to the iPhone, but iTunes and the iPhone automatically organize everything based on song title, while I have organized everything based on filename. Is it possible to make the iPhone and/or iTunes display and order songs by filename? I could manually rename everything, but with nearly 1000 songs...
5) Is there a Find command on Safari, corresponding to control F on other browsers? When reading long pages, I miss being instantly able to locate a specific word.
6) Is it possible to use the recorder built withon the iPhone to record a phone call? Is there any application capable of doing so?
7) I have set my Gmail account to the e-mail function, but I have noticed that, unlike the Gmail website, the e-mail application doesn't keep conversations together (like what the iPhone does with messages, keeping a message and its replies together). Is there any of setting the Mail application to do that?
Thank you.

1. For your pdf and other files I recommend the application Files. Files light is free and has a 300mb limit I think. The paid version is limited by your free space on the phone. It views Excel, Word, PDF, JPG, music, and other files. The transfer is by wireless.
2. Files might work with your movies, but they must be in a format the iPhone supports.
Video formats supported: H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per second, Low-Complexity version of the H.264 Baseline Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; H.264 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Baseline Profile up to Level 3.0 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
6. No, the recording of a phone call is not supported nativly by the iPhone.

Question on Document Download from Library: wopi.ashx vs download.aspx

I just got curious with this behavior, hence thought of posting this here. I was monitoring RequestUsage table to check the entries SharePoint makes when a user downloads a document. I downloaded two documents from Library. One document was downloaded using
the ribbon "Download a copy" option. Another document was downloaded using ECB menu.
When I observed in RequestUsage table, DocumentPath column was "/_layouts/15/download.aspx" and QueryString column was pointing to the document URL. This was smilar for both documents.
When the similar download activity was done from "other machine", DocumentPath column was "/_vti_bin/wopi.ashx/files/ec1a5b7d6e92497aaaf69ac3044c6912" and QueryString column was "?access_token=[lengthy characters]".
Both machines were using Windows 7 and this test were done from Chrome browser. My question is, why this difference in the way document gets downloaded? Basically what differentiates to call download.aspx or wopi.ashx? Any pointers please?

Hi Suresh,
When you click Download a Copy, it will redirect you to
http://site/_layouts/download.aspx?SourceUrl=urlofdocumentinlibrary If you are using IE browser, please download a document, then go to IE settings icon, and view downloads, right click the documents and copy download link. Then paste in a notebook,
you will find the link is in type of the link above.
As for the "/_vti_bin/wopi.ashx/files”, it is related to Office Web App. We access document via Office Web App, and it will use the url like that. The access token is a token passed between SharePoint and the Office Web Apps servers.
For reference:
http://blogs.technet.com/b/speschka/archive/2012/07/23/configuring-office-web-apps-in-sharepoint-2013.aspx?pi47623=2
http://blogs.msdn.com/b/fabdulwahab/archive/2013/10/30/office-web-apps-with-sharepoint-2013-issues.aspx
http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
http://blogs.technet.com/b/speschka/archive/2012/07/23/configuring-office-web-apps-in-sharepoint-2013.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

Basic questions about Bigdata, NOSQL and Hadoop

Hi,
I've basic questions related to Bigdata. (I've googled it but still wants to confirm with experts)
Please correct me if I am wrong on below.
1) As far as I know big data is collection of unstructured data. Even we can store relational data as well.
2) NOSQL is an Oracle product to handle bigdata (un structured data and relational data as well)
3) Hadoop is the only one frame work which is avilable in market to manage the bigdata.
What are the other database systems we have in the market to manage the bigdata.
Cheers,
Suri

Hi Suri,
1) "Big Data" does not have a crystal clear, black and white definition.
It is generally characterized as being the processing and management of an amount and type of data that makes a specific workload on that data slow and/or expensive.
Most commonly, Big Data involves processing and management of unstructured data of large volume and the typical technology used to store/process it is Hadoop, However, on occasion a NoSQL database will also deal with unstructured data.
Big Data is also seen often in the form of simple, semi-structured data of both large volume and/or large velocity and the typical technology used to store/process it is a NoSQL database. However, on occasion Hadoop will also deal with semi-structured data of large volume.
In some cases, Big Data is seen in the form of highly connected data that will be manipulated by advanced algorithms that will need to touch a lot of the data and the typical technology used to store/process it is a Graph type of NoSQL database.
2) NoSQL is a category of database technologies most often dealing with the issues as outlined in bullet 2 above. The Oracle NoSQL Database is oracle's product in the NoSQL category of database technologies. It does NOT store relational data. When using NoSQL relations between the data must be managed within the application code.
3) Hadoop and NoSQL booth manage Big Data, but different aspects as discussed in (1) above. Hadoop is a batch based, slow processing data technology, but the "slow" is relative because it can process very large amounts of data, so minutes is commonly seen as fast. NoSQL is a near real-time data processing technology and typically deals with Big Data where access times are in the single digit millisecond range.
Hope this helps,
-Robert

BASIC QUESTIONS - VERY URGENT

I have some basic questions regarding Oracle XMLDB's features.
Is there a special JOIN clause that can be used in Oracle XMLDB?
Can we create partitions in a set of records that are all based on the same DTD? How do we query records from a particular partition?
Is it possible to query records with synonyms of words present in the documents (some sort of a dictionary feature)?
Is it possible to query records based on the hierarchical directory structure using which the documents have been stored? i.e. can we query all documents that are stored in a specific path (including/excluding subdirectories)?
Can we select a particular field within the XML document to be the primary key? Can the documents be indexed based on this field?
What is the general performance of XMLDB like? For a database of the order of say 50-100 million XML records, would the performance be better with oracle XMLDB or with oracle RDBMS + some XML-RDB mapping tool?
It would be good if any one could help me out.
Waiting for earlier response

Ram
Please review the Oracle XML DB basic demo, it will answer some of your questions.
To answer some of your questions.
XML DB is architected to work with documents that are based on an XML SChema rather than a DTD...
If you documents are not based on a schema you will need to store them as CLOB Based XMLtype. At this point you will be better off storing then in a relational table with an XMLType column, rather than an XMLType table. You can add other columns to this table for partioning purposes...
You can query documents based on an Hierarchy, but only if they are schema based. Non schema based XML would be stored in the repository, Again it can be queried in terms of the heirarchy, but you cannot control the partioning on non schema based XML stored in the XML DB repository.
You can have a PK only with Schema based XML. You can partition Schema based XML on any element that is not part of a collection.
Hope this helps

2 Basic questions

Hai guys,
i am beginner in Webdynpro.i have
2 basic questions in abap webdynpro.
1)after a view is designed,while generating the application,we usualy get a web applicaiton.and use the url to access the developed screen.
can we,alternatively,generate a ABAP transaction instead?(like instead of URL ,we shud get a tcode,like normal abap dynpro)
in other way,i want to develop abap dynpro using webdynpro tools.
2)can we take a webpage,and covert in into meta data and thus,use it to create the view?(the reverse of what we do)

Hello shravan,
Regarding your first question: YES, you can attach a normal ABAP transaction to a WDA application.
Check out this report code I wrote, you just need to change the k_wdappl_name constant value to your application name:
REPORT y_abindi_001.
CONSTANTS: k_browser      TYPE string VALUE 'IEXPLORE.EXE',
           k_mandt_prefix TYPE string VALUE '?sap-client=',
           k_wdappl_name TYPE string VALUE 'YTEST_WD2'.   "Nombre de la aplicación
DATA: g_mandt_param TYPE string,
      g_url         TYPE string.
START-OF-SELECTION.
CONCATENATE
    k_mandt_prefix
    sy-mandt
INTO g_mandt_param.
CALL METHOD cl_wd_utilities=>construct_wd_url
    EXPORTING
      application_name = k_wdappl_name
    IMPORTING
      out_absolute_url = g_url.
CONCATENATE
    g_url
    g_mandt_param
INTO g_url.
CALL METHOD cl_gui_frontend_services=>execute
    EXPORTING
      application            = k_browser
      parameter              = g_url
      maximized              = 'X'
    EXCEPTIONS
      cntl_error             = 1
      error_no_gui           = 2
      bad_parameter          = 3
      file_not_found         = 4
      path_not_found         = 5
      file_extension_unknown = 6
      error_execute_failed   = 7
      synchronous_failed     = 8
      not_supported_by_gui   = 9
      OTHERS                 = 10.
IF sy-subrc <> 0.
    WRITE:/,'Error al ejecutar Browser (',k_browser,')'.
ENDIF.
Then attach a report transaction to this program, that's it.
Regards.

GRC - BASIC QUESTION

Dear All
I would to get the clarification on general question as below:
1. Who will be the part of the GRC (functional or Technical) ? What is best practice ?
2. What will be the role and responsibilities of GRC consultant ?
3. What are best practices say about the GRC Deployment ?
4. What is the best landscape with GRC ?
5. When GRC - ERM will be 100% bug free ?
Regards
Vimal

Hi Vimal ,
   Almost all the questions you posed are very generic ( As you rightly said, these are the BASIC QUESTIONS) and really need a lots of explanation to understand the product , here I have just given a few reference sites try to visit , it may be helpful in answering few of your queries
1. Who will be the part of the GRC (functional or Technical) ? What is best practice ?
Ans: Both ( also include many other teams like Business Process Owners etc etc )
2. What will be the role and responsibilities of GRC consultant ?
Ans: Quite a Lot Depends on the area where the consultant is working
3. What are best practices say about the GRC Deployment ?
Ans: These are the few customer feed back try to visit   http://www.sap.com/solutions/sapbusinessobjects/customers/testimonials/index.epx
4. What is the best landscape with GRC ?
Ans : Lots of documents available , but its always depends on your requirement , However try to visit http://www.sap.com/solutions/sapbusinessobjects/governance-risk-compliance/index.epx   You will get the better understanding of the GRC , then based on the requirement , the landscape will change.
5. When GRC - ERM will be 100% bug free
Ans: I feel, we canu2019t not say any software is 100 % Bug free , As you know that people always try to improve the quality of product by minimize the Bugs , and as and when a customer/ Consultant found a bug , SAP is always address in very less time and they release the patch/Note to address these issues.
Thanks & Regards
Umashankar T ekumudi

Basic questions of structure Alchmy inside the AVM ans corePlayer ? Help!

Hello community:)
Flash Player 10 has been amended in order to run the new code from the compilation Alchemy! Is this correct?
The new ABC Alchemy is for new features such as memory pointer, asynchronous functions? is that correct? and what else?
This amendment consists of a small AVM separated from the Tamarin ? where everything is in Tamarin?
The memory allocated to code from Alchemy is separated from the memory area allocated to the AVM and PlayerCore? it is like that?
The CorePlayer flashRuntime and had to be changed?
The ABC from Alchemy is intended only as to the AVM? or also to CorePlayer?
Alchemy can access the BIOS? especially for 33h the mouse? if not, is it possible to control the mouse in one way or another with Alchemy?
Immagine it would create a code C to produce sound from a bytesArray to replaceSampleData AS3 class, it's possible? If not, why? a restriction of the sandbox?
Can be added directly to the assembler code using Alchemy? or it's prohibited because of the respect of cross platefrom?
Thank you for maximum responses! although one can easily imagine some answers, I have confirmation:)
Too many people claim things on forums, affirmative behave as if it was the system programmers themselves FlashPlayer! Outside, people sometimes give wrong answers! Two days ago, I had a guy who claimed that the AVM does not compile ABC! The ABC was executed directly . It's sad and a shame to read such things. He obviously did not read and do not know the JIT
This post is aimed at people on what they say and who were able to verify the information. Alchemy or programmers themselves.
Thank you all!

In order to understand things and not waste our time trying to code without knowing ifthey are not working because of am or even if it is because it is not impossible or not the player, I'm posted this on the forum Player. But my post is not answered .. Adobe programmers never come on this forum? Nobodyknows exactly how it works?
Hello everyone
I have some basic questions about the Flash player and AVM2..
I made this little flow chart for Player 9 and above >
Can anyone tell me if it is consistent and fair to me or to report a possible error?
AVM2 the only accessing the CPU and Ram? and in no event in the device or OS API, right?
The AVM2 in our current players is always a Tamarin?
The next step is to replace the JIT by the nanoJIT spiderMonckey?
The byteCode from Alchemy is well executed in the AVM and not elsewhere?
The memory area codes assigned to Alchemy is the same as that of the AVM or is it different andseparate?
Thank you for your answers.
Gordially, Alain.

Basic questions about JSF/af:panelPage/Facets

Hi there
Using JDev 10.1.3.3.0, I created a couple of JSP pages using JSF and ADF BC. Then I added to one of them a af:panelPage and changed the facet branding to be the company logo.
Do I need to do the same for the other page (and any other pages that I create)? Is there a place where I set this facet value globally?
And is there a way to set up what facets are included in a af:panelPage by default?
Sorry if these are basic questions, I am just starting to use JSF!
Thanks,
Luis

facets with af:panelPage.
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtTopicFile.jsf_apps%7Cadfcreate%7Caf_alay_pagecomponent~html/
http://otndnld.oracle.co.jp/document/products/as10g/101300/B25221_03/web.1013/b25386/web_complex002.htm
Re: <jsp:include page/> - Error

Basic questions about Network Licence

Hi,
Before buying, I have some basics questions about the network licence of Acrobat
As an example, if I buy 5 network licence for 20 users.
If the 5 licence are used or if one user is outside and can't access the licence serveur, is there still some basic features available? I mean, is there a "acrobat reader" part that still allow users to read pdf?
In the same kind of problem, if 10 users are using Acrobat just for reading pdf file and that a user now want to use acrobat to create a pdf, is there still available licence or the 5 firsts that are just reading have take the 5 licences available?
Thank you for your answers

This is a user to user forum, with the space provided by Adobe
This is not official Adobe support... I think you need to contact Adobe

Very basic questions on text/email

So I'm now convinced - with the 3.0 OS and the 3GS handset, the iPhone finally does all I want it to do and I'll be buying my first one in a couple of weeks.
Before I do, though, I have a couple of very basic questions:
1. Does predictive text only work in the SMS app, or does it work in the apps for email, writing notes, etc?
2. Can you turn the predictive text off? (I find it wildly irritating, because I know far better what words I want to write than a pesky phone does!)
3. Having email sent to a mobile is a whole new world for me! Do I need to subscribe to MobileMe at £££ per month, or is there another way of having email from my three accounts forwarded to my mobile?
Hope someone can help!
Cheers,

1. Does predictive text only work in the SMS app, or does it work in the apps for email, writing notes, etc?
It works with Safari, the Mail client, the Notes app, and with the SMS app.
2. Can you turn the predictive text off? (I find it wildly irritating, because I know far better what words I want to write than a pesky phone does!)
Yes.
3. Having email sent to a mobile is a whole new world for me! Do I need to subscribe to MobileMe at £££ per month, or is there another way of having email from my three accounts forwarded to my mobile?
You can access any IMAP or POP account with the iPhone's Mail client, and access multiple email accounts. I currently access to email accounts with the iPhone's mail client - my MobileMe account, and a business POP account. You can access all 3 of your email accounts with the iPhone's Mail client.

Basic Question - Update - Usage of index

Gurus,
I have a basic question. As per my knowledge, an index will speed up the process while we are selecting the data. If we are doing some DML operations (especially Update), do we need the index to speed up the process eventhough the indexed column is in the where condition?
Regards
Edited by: Sarma12 on Apr 17, 2012 5:59 AM

Have you tried setting up a test scenario? For example:
SQL> CREATE TABLE test AS SELECT 1 num FROM DUAL CONNECT BY LEVEL <= 1000;
Table created.
SQL> UPDATE test SET NUM = 99 WHERE ROWNUM = 1;
1 row updated.
SQL> COMMIT;
Commit complete.
SQL> UPDATE /*+gather_plan_statistics*/
2         test
3 SET    num = 2
4 WHERE num = 99
5 ;
1 row updated.
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(null,null,'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID 96wt4ddwy0sa5, child number 0
UPDATE /*+gather_plan_statistics*/        test SET    num = 2 WHERE
num = 99
Plan hash value: 3859524075
| Id | Operation          | Name | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   0 | UPDATE STATEMENT   |      |      1 |        |      0 |00:00:00.01 |       7 |
|   1 | UPDATE            | TEST |      1 |        |      0 |00:00:00.01 |       7 |
|* 2 |   TABLE ACCESS FULL| TEST |      1 |      1 |      1 |00:00:00.01 |       4 |
Predicate Information (identified by operation id):
   2 - filter("NUM"=99)
Note
   - dynamic sampling used for this statement (level=2)
24 rows selected.
SQL> rollback;
Rollback complete.
SQL> CREATE INDEX test_x1 ON test(num);
Index created.
SQL> UPDATE /*+gather_plan_statistics*/
2         test
3 SET    num = 2
4 WHERE num = 99
5 ;
1 row updated.
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(null,null,'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID 96wt4ddwy0sa5, child number 0
UPDATE /*+gather_plan_statistics*/        test SET    num = 2 WHERE
num = 99
Plan hash value: 734435536
| Id | Operation         | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   0 | UPDATE STATEMENT |         |      1 |        |      0 |00:00:00.01 |       9 |
|   1 | UPDATE           | TEST    |      1 |        |      0 |00:00:00.01 |       9 |
|* 2 |   INDEX RANGE SCAN| TEST_X1 |      1 |      1 |      1 |00:00:00.01 |       2 |
Predicate Information (identified by operation id):
   2 - access("NUM"=99)
Note
   - dynamic sampling used for this statement (level=2)
24 rows selected.So yes, an index may be used in DML.

Basic questions. Accessing documents

Similar Messages

Maybe you are looking for