Basic Questions On List View Plug-in For Lightroom

I need some basic information about the List View Plug-in for Lightroom:
HERE ARE MY QUESTIONS:
I have 40-60 photos per folder. Can List View list that many files on successive pages?
Most of the time I have 15-30 keywords or keyword phrases listed per picture. If I could widen the column I could see all of them. If the column does not widen, will the keywords not shown still be there to be exported to an Excel column, and then shown?
The thumbnail pictures on the end of all the summary lines are cool, but can I delete them before exporting to Excel?
Thank You Very Much for any information about this Plugin,
THANK YOU,
Sandy

Your questions seemed to be asked without actually tried the trial of the plug-in. I did, just now, and from what I can tell, with only have 20 images to test with since that is the trial limitation:
1)      The number of rows is fixed, and you can use the slider at the top-right to move from one page to the next.
2)      The columns do not change width in the plug-in though what you can’t see still gets exported to Excel although I’d expect all the keywords to be in one Excel column, not one column each.
3)      There are several sizes of thumbnails that can be selected from, including None—this is new compared to the one screen-capture on the plug-in website, so setting None as the thumbnail size is how you’d prevent thumbnails from going to Excel. I tried exporting thumbnails and they were all broken images, so maybe it doesn’t actually work, or maybe there is a limitation in the trial mode.

Similar Messages

Plug in for lightroom

What do I need to do in order to use a PS as a plug in in Lightroom?

Maybe my question was not correct. Let me explain what do I need. I have been using Lightroom and sometimes I would like to swich to PS to to use options not available in there. Hope, now you understand my question.Thank you for your time Baron06903
Date: Sat, 5 Jan 2013 02:34:20 -0700
From: [email protected]
To: [email protected]
Subject: plug in for lightroom
    Re: plug in for lightroom
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
What exactly? LR uses a different plug-in format than PS and you need to obtain the specicifc LR versions of whatever tools you have in mind... Mylenium
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4969871#4969871
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4969871#4969871
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4969871#4969871. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Custom column in a list view web part for a multilingual site does not take on custom language labels. Stays in default language.

Hello all,
I have what so far appears to be a fairly unique problem. We are running a multilingual SharePoint 2010 environment with English as the default language and French as the secondary. We have setup the sites in a variance relationship, but the
issue I am discussing happens outside of a variant as well.
We have created a library outside the variant (but within the collection) that the two sites must share. A list view web part was created via Designer to add to each site to provide a quick view into the list. If we are in the libary and switch
to French, then update the column label it will remember the setting (because of the resource file) and maintain it as the language is flipped back and forth. Where it doesn't work is as a web part in a variant or where the language is different.
If the language is different, the out of the box columns work find, but the custom columns (all site columns not library\list columns) remain as the english label. It doesn't matter if within a variant or outside with the browser language changed.
It always reverts back to English. It's like it isn't using the same resource file that was used in the list itself.
I created a custom view and modified it with xslt as per
http://sharepoint.stackexchange.com/questions/50004/how-to-change-column-title-for-a-view-but-not-modify-the-list but this only worked within the list and did not occur in the list view either.
I can't be the first that has come across it, either I am not performing my searches properly, no one has ever documented a fix for this or this is something we just can't fix with OOTB tools. That's the other thing, the solution has to be accomplised
OOTB or with minor client side changes. I can't fire up Visual Studio because they are piloting Office 365 and have put a "No custom code" mandate on for migration.
Thank you all in advance.

Ok, I have come up with a solution. I edited the XSLT for the web part on the page. I did the following:
1.   Create the variants in the Site Ccollection
2.   Create the library outside of the variants.
3.   Add all the columns you require for the library. It is very important all the columns are there before you move on.
4.   Create a French and English view.
5.   Create the list view web part via designer.
6.   Add the list view web part to each site selecting the appropriate view to use.
7.      Edit the page in SharePoint Designer 2010.
8.      Place cursor in the column you wish to modify.
9.      Click Design in the List View Tools on the ribbon.
10.     Then click Customize XSLT and select Customize Item. Select this option otherwise you will generate a **LOT** of unnecessary XSL code.
11.     You are looking for a piece that resembles the following:
        <xsl:with-param name="fieldtitle">
          <xsl:value-of select="@DisplayName"/>
        </xsl:with-param>
12.      Modify it by typing in the actual column name you want. You should end up with something like this:
        <xsl:with-param name="fieldtitle">
          New Column Name.
        </xsl:with-param>
13.      Now, for this page only, the column will be renamed.
There are some caveats:
1.   Doesn’t appear to work in a publishing portal. I think this has to do with how SP stores the pages in this case. In a publishing portal you can only modify the page layout which won’t work as we need to modify the content.
2.   If you add another column, you will need to repeat the XSLT modification
Anyways, I hope this helps out any others with the same issue or need as I had.

Missing speaker icon in list view in iTunes for Windows

On my Mac I can see a speaker icon in list view of iTunes, but in iTunes for Windows 7 I cannot see the speaker icon that shows now playing against the song playing in list view - anyone help how to switch this on?

..same problem here!
Solution:
in the View Options: Arrange by has to be set to none
Message was edited by: Andy_M

Hide "more" button in a list view, only works for first item in the list

I have the following code in a list view that outputs several dozen items in a web app. The code only works for the first item, how can I make it loop through and execute the test for each item in the list view? The {tag_hide more button} is a checkmark field that yields a numeric 1" if checked otherwise yields a numeric "0".
<div id="more-option">
        <p class="right"><a href="{tag_itemurl_nolink}" class="btn btn-small btn-very-subtle">More →</a></p>
      </div>
      <div class="more-selection" style="display: none;">{tag_hide more button}</div>
      <script>
if ($(".more-selection").text() == "1") {
    $("#more-option").hide();
</script>

What's the URL for the site where you are using this? Offhand, it looks like it should work with your first example so you are either placing the script before those elements are loaded or you might try wrapping your current javascript inside the:
$(document).ready(function() {
--- your existing javascript here
This make sure the code runs once all the html is loaded on the page. Without seeing a URL and debugging with the js console in Chrome I can't give you a solid answer.
But, I do know that you can probably do this with a lot less markup. Once we figure out what the actual problem is I have a better solution mocked up for you on jsfiddle.
When looking at my HTML code on jsfiddle, please realize I setup some dummy HTML and removed your tags and added actual values which would be output by your tags. The main thing I did was remove the whole div.more-selection and instead, added a "data-is-selected" attribute on your div.more-option element. Then, in my javascript for each div.my-option element on the page, we loop through them, find the value of that data attribute and hide that div if it's less than 1 (or 0).
Here's the fiddle for you to look at: http://jsfiddle.net/thetrickster/Mfmdu/
You'll see in the end result that only two divs show up, both of those divs have data-is-selected="1".
You can try pasting the javascript code near the closing </body> tag on your page and make sure to wrap my js inside a <script> tag, obviously. My way is neater on the markup side. If you can't get it to work it's likely a jquery conflict issue. My version is using the $(document).ready() method to make sure all the code is loaded before it runs.
Best,
Chris

Basic iCal functionality-list view

Does iCal have a list view? I am looking for a view of an individual calendar where I can see all the events and respective dates for that calendar. I have a lot of old calendar and can find no way of seeing all the old entries in those calendars. I would like to transpose some of those events into new calendars - selectively.

Julie,
There are three buttons on the bottom right side of the iCal window.
Just click on the one with the three lines to view events in the list pane.
There are list print options in the Print>View selections.
;~)

I am running Quickbooks Online and need a pdf viewer plug in for Firefox 5 in order to print checks. Is it available and if so where?

After writing a check in QBOL it shows it in a pdf viewer within my browser. After upgrading to FIREFOX 5 I can not print checks correctly as the earlier pdf viewer plug in is nit compatible with Firefox 5

Try the version posted here:
Blaq Blog - Firefox 4 Mac PDF Solution:
* http://www.blaqapp.com/blog/110329-Firefox-4-Mac-PDF-Solution
You need this extension to overcome the compatibility problem.
*Add-on Compatibility Reporter: https://addons.mozilla.org/firefox/addon/add-on-compatibility-reporter/

Basic question on multiple views

Just getting started in the world of cocoa, objective-c, etc. and have basically started by building a very basic app and slowly adding things to that app (however arbitrary and seemingly useless) to teach myself new things.
I initially started with a simple app that loaded a single view that had a couple of buttons (one plus, one minus) and a "total" label. All that happened was the total incremented/decremented by 1 based on the button you selected.
I want to try and hit on the idea of multiple views, so I've modified the code to only allow the user to modify the total within a range of 1-5 and have added a "Go To Page" button.
What I'd like to do now is set it up so that the user generates a number (1-5) and then selects Go To Page at which point I load a page (probably just with a label to confirm which page it is, i.e. "First Page", "Fourth Page", etc.).
I guess where I'm running into a mental block is how I go about changing views from within a view controller (where my response to my "Go To Page" button is).
I understand I could build all of my views (basically just my navigation view controller and one other "page controller" that I will create multiple instances of and set different label values on) in the App Delegate, but how would I go from my response method inside one of the controllers to my top level Delgate.
Again, I know this is basic stuff, but I'm learning and have had some difficulty finding answers to some specific things.
Thanks.

Hi jd & welcome to the forums
You may want to visit iTunes/iTunes U and download some of the iPhone developer videos...good stuff that will help you get a handle on using the touch screen and smaller space, etc.
Also, check the Apple iPhone Human Interface Guidelines...
The point I'm trying to suggest is that your 'block' about how to design and proceed may actually be your inner geek trying to tell you this is a new environment and you perhaps need a bit more time to come to grips with what is actually a new way of presenting data, etc.
'pages' are so.... yesterday

Download FB plug-in for Lightroom 5

My plug-in for FB was buggy and never worked. Deleted it and emptied the trash. Where can I download a fresh copy of the plug-in? Can't find it on the Adobe plug-in site.

Dunno where to download Adobe's, you may need to re-install the Lr app to get it (dunno).
That said, perhaps now would be a good time to consider upgrading your facebook interface:
Jeffrey Friedl's Blog » Jeffrey’s “Export to Facebook” Lightroom Plugin

Problem with adobe pdf viewer plug-in for safari

I recently updated from adobe reader 8 to adobe reader 9 and now pdf documents that I view on Safari won't open. I get this message that says 'adobepdfviewer does not recognize a compatible adobe acrobat or adobe reader program' This is really strange because I have both Adobe reader 9 and Adobe acrobat installed. If you have any advice or solutions it would be much appreciated.

Personally, I like to open PDFs that I have saved to my hard drive in Adobe Reader, because I find it quicker, especially with PDF files that have many pages. I also find the resizing controls and search functions more useful in Adobe Reader. At the same time, for quick looks when clicking on web links, I don't mind letting Safari open some PDF files. So having both capabilities is important to me.
one000mph, your problem might be in the Adobe Reader / Acrobat preferences settings. It's perfectly possible to have these programs installed and still view PDFs in Safari, so there really isn't a need to delete either or both of the programs.
If you still have one or the other of those installed, check its preferences "Internet" setting where it says, "Display PDF in browser using ..." I have that set to "Adobe Reader 8.1.2" and its working nicely. If you don't have Adobe Reader installed any longer you might have different options there than I have. Try the different settings there and see if changing them solves the problem.

Request: PDF Viewer plug-in for Firefox

So, just what is wrong with Adobe? Shouldn't this be a no-brainer?

EEE! All right! Good-bye Adobe! I found a very good working option -- no plug in required!:
http://www.docufarm.com/ (Can't find it through mozilla, but I did a virus scan before I downloaded it, and it was clean (you should always do that)). An explanation as to how it works is located at
http://googlesystem.blogspot.com/2007/05/preview-documents-with-docufarm.html
Three problems with the PDF Browser Plug-In:
(1) Limited features -- cannot search within the document
You can direct the plug-in to use Adobe (or other viewer) to open, but then the document is downloaded which belays the whole point of having the plug-in...
(2) Scrolling issues (minor, I could live with it, but it is annoying): using the scrollbar tends to break the display and you have to reload the document
(3) PDF Browser Plug-In does not work directly with Mac Intel (must run Rosetta) -- this is an issue since I'm about to upgrade my powerbook...
I agree it likely comes from higher than the poor programmers. Either Mac/FF users simply aren't a large enough group to get priority (I was kinda hoping this thread would prove that wrong), or the directive came from Apple (not Adobe) -- they've been stupid about the competition thing before... ...but if feature requests aren't read by anyone at Adobe what's the point of having a feature request forum?

Plug-in for Lightroom 4.3 for Facebook on Windows ?

I have Lightroom 4.3 and am using Windows 7, 64 bit, and wanted to use publish services with Facebook. Add photos to Facebook through Lightroom which is stated possible. When I try to utilize it, I am told under the Mozilla Firefox that
" it doesn't know how to open this address, because the protocol (lightroom) isn't associated with any program. You might need to install other software to open this address."
Terry White's solution does not work, some guy named Jeffrey on a blog wants $ through PayPal and I would have thought that Adobe would have a simple fix. I have Googled the question with no successful results. Does anyone have a solution? If it can be done with Flickr why not Facebook???

Hi, assuming your are referring to Jeffrey Freidl then can I just say that his plug-ins add so much more flexibility to any that might already exist in LR and I think he only expects the minimum set by Paypal as the minimum donation.
You can try them for a number of days before deciding to donate.
I did and I wouldn't be without them.

DxO 4.5 with plug-in for Lightroom available

Another great news, DxO released update 4.5 to its Optics Pro software. It incorporates a Photoshop plug-in and a Lightroom plug-in as well.
You can send files from Lightroom to DxO, as you already do with LightZone, including autostacking with original... but you can also send files to Lightroom from DxO standalone version.
Good stuff. DxO made clear that they want to push integration further but, for this, Adobe has to hurry with SDK release...
Gilles.
more info @ www.dxolabs.com

Craig, I believe the DxO pdf manual (p.16) mentions that DxO always returns files in TIF format (http://www.dxo.com/intl/photo/learning/tutorials/dxo_optics_pro/integrating_dxo_optics_p ro_v4_5_and_above_with_adobe_lightroom)
"Hint: RAW images edited by the DxO Optics Pro plug-in will always be returned to Lightroom as a 16-bit TIFF."
If I've misinterpreted this and someone knows how to return the file in DNG or RAW format please let me know. I'd much rather continue Lightroom adjustments on a RAW file than a TIF file, especially since my 16bit TIF files are about 50-60MB compared to 13MB for my 5D .cr2 files.
Wick, I'm not sure about the sidecar comment either. I have XMP sidecar files created and updated for all my .cr2 files but the metadata was still lost after the round-trip.
Thanks for helpful comments guys.
I really want DxO to work but it just isn't elegant when you need to process hundreds to thousands of different images quickly, which is what LR does very well. I do mainly travel photography so my favorite lens is the Canon 24-105 f/4L. Didn't realize how much distortion happened on the wide-angle side as I used to travel with a Canon 1DMarkII (1.3 crop factor). I'm now travelling with a Canon 5D and unfortunately that full-frame DSLR really shows up weaknesses in lenses :(

PicWorkflow Multiple-Microstock Plug-in for Lightroom 5

¿Qué tal?
Encontré el plugin para exportar directamente a agencias de Microstock:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=2346523
Antes de instalarlo vi en el readme que era para versiones 2 y 3 de Lightroom. ¿Alguien lo encontró para el 5?

Nada. Sucede lo mismo que con la descarga desde mi enlace. Instalarlo incluso lo permite pero luego no aparece como reconocido en los servicios de publicación de la pantalla de LR5.
A lo peor hago algo mal, pero en el readme del vínculo que me envias, dice lo mismo sobre las versiones de LR.
Usaré el email. Si averiguo algo lo incluiré aquí.
Gracias.

XSLT List View Web part with Inline Editing changing value for one field changes the other lookup field

Hi
It's a bit of a weird one. In an XSLT List View web part when Inline editing is enabled if I change the date column, it changes the lookup field column as well. This behavior only occurs if the lookup list has more than 20 entries. Below 20 and we are
OK.
Let me explain by example:
MileStones List - Having more than 20 items
Tasks List - having a lookup to the Title field from MileStones list. Also having a due date field.
Simple web part page with one XSLT List View web part for Tasks having inline editing enabled.
When I edit the first record's due date and press enter (which saves the changes and moves onto next record) and change the due date on second record without even touching the MileStone field. Press enter to commit changes and you see the milestone changing
on first record!
The wierd thing is that if the MileStone list has less than 20 items all works as expected.
Any pointers will be appreciated
Thanks

Hi,
This is a known limitation when working with complex fields like Lookup field.
A workaround is that we can avoid using the inline edit feature when there are
complex fields in a list.
You can take a look at this KB from Microsoft Support to get more details:
http://support.microsoft.com/kb/2600186/en-us
A similar thread for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3d369611-ee79-4b5c-86bb-c0f3878cd746/standard-list-view-with-inline-editing-lookup-column-copies-preceding-or-following-items-related?forum=sharepointgeneralprevious
Thanks
Patrick Liang
TechNet Community Support

Basic Questions On List View Plug-in For Lightroom

Similar Messages

Maybe you are looking for