Basic questions on migrating from a controller-less setup to a 2504 controller setup

Hello,
I am new to Cisco networking so forgive me for my basic questions. Currently our company uses a controller-less setup with 2 WAP321's and 1 Cisco controller-less 2602e WAP.  I am told I can reflash the Aironet 2602e to be used with the controller.  My first question is, if I mount the controller and network it into my network to set it up, will it effect my current environment? I don't want a situation where I take down the current environment.  If it will not harm my current wifi network then, should I be able to configure the controller fully and associate my new WAP Cisco Aironet 2602e to it without effecting the current environment?  Thank you!

There will be no problem.
connect AP to switch and place it same place where it was to cover the same area.
Make sure that 2602 AP need minimum 7.2.100.0 version on WLC.
See the compatibilty matrix.
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Regards
Dont forget to rate helpful posts

Similar Messages

  • Several questions about migrating from iPhoto to Aperture

    I'm currently a heavy iPhoto user and am looking into migrating to Aperture. Can anyone give me a sense of what I to expect if/when I make this switch?
    Here are several particular things I'm wondering about:
    1. iPhoto works great as a computerized photo album for casual browsing. (I can see a page of different events with mouse-over previews, plus I can hide poorer shots so that I can just view the highlights.) Will Aperture be a step back in this department? If so, is it possible to "share" my Aperture photos with iPhoto without keeping two parallel copies of everything?
    2. When I import an edited photo from iPhoto to Aperture, will the iPhoto "original" become the Aperture "original" and the iPhoto "modified" become the Aperture "modified? Is the same true if I export an edited photo from Aperture to iPhoto?
    3. Does Aperture have an analog for "hidden" photos? I currently mark my best shot from a series by hiding the rest. Will I lose this marking if I migrate to Aperture or is there a way to preserve it?
    4. I currently have a number of short video clips (taken with my point-and-shoot's video feature) mixed in with the iPhoto albums. (iPhoto really does let me keep everything organized in one place!) If I understand correctly, Aperture won't let me store these in my Aperture library alongside the still-photos of the same subjects. Is this correct? If so, how have other people handled this?
    5. Do EXIF tags get re-read upon import from iPhoto to Aperture? I've got a number of iPhoto files which I've retroactively geotagged with HoudahGeo. Will the tagging be lost (since iPhoto is not currently aware of the geotagging as the EXIF tags have not been re-read)... or will Aperture now recognize this metadata?
    6. If worst-comes-to-worst and I give up on Aperture after a few months, how painful will it be to un-migrate back to iPhoto? More importantly, what album metada (e.g. events, albums, ratings, tags, notes, dates, hidden-ness, links between original and modified versions of a photo, iWeb references, etc.) will be lost? In other words, if I were to import everything from iPhoto to Aperture, wipe my iPhoto library clean, and then export everything back from Aperture to iPhoto, what information will have been destroyed?
    Thanks in advance for any answers to this long list of questions!

    Here are several observations (read: warnings) in case anyone else is considering migrating a significant iPhoto library to Aperture...
    A) Pictures marked as "hidden" appear to be silently skipped over (along with video clips, as was expected) when importing an iPhoto library to Aperture. They do not appear in the relevant Aperture project regardless of the filtering options.
    B) Both iPhoto originals and modifieds are imported. The former are given the keyword "iPhoto original" and the latter are given the keyword "iPhoto modified." Each pair of photos is put into a single Aperture "stack." Both photos are given the same tags/ratings (so, for example, the un-rotated, uncropped, poorly balanced original will show up alongside the nice clean "modified" if you were to filter for 5-star images), and both files are given identical "version names" (equal to the "name field" in iPhoto). In most cases the original -- not the modified version -- was set as the stack's "pick" and displayed when the stack was collapsed. *Significantly, I could find no way of creating a view in Aperture that showed one copy of each picture, with the "iphoto modified" version displayed for photos that had been modified in iPhoto and the original version displayed for photos that had never been modified in iPhoto!* (This is, of course, the way they are shown in iPhoto.)
    C) My understanding of "stacks" is that they are designed to help organize multiple "tries" at the same shot (e.g., I want to make sure that nobody's eyes are closed in the group photo, so I press the shutter six times in quick succession -- I'm going to pick a "best" one will be mostly interested in that shot from then on). This is a fantastic idea! However things get confusing if you are already using stacks to track original and modified versions (as described above)... particularly if your stack should contain six pictures plus original versions of each. Plus, as I mentioned, the "original" version is usually the default "pick" in each stack.
    D) After import, "iPhoto original" versions of portrait photos appear un-rotated. Normally, my cameras (including a Nikon D80, an iPhone, and others) mark photos' orientations and they are automatically displayed in the correct orientation. Aperture appears to consider this auto-rotation an iPhoto edit and helpfully displays the "iPhoto original" always in landscape.
    E) Aperture may incorrectly import events whose names contain a "/" or a ".", so if your event names contain dates, rewrite them with "-"s before importing to Aperture.
    F) Aperture does have a rough mouse-over-the-icon-to-flip-through view, similar to the "events" pane in iPhoto... although you will lose your choice of which photo serves as the default icon for each event when you import your library from iPhoto, and you cannot "hide" photos from appearing in the flip-through as you can with iPhoto.
    G) Perhaps it's my inexperience with the program, but I could find no way to sort the project list by date (vs. alphabetically), nor could I find any way to make a correction to a single photo's date/time.
    As a bottom line, remember that Aperture is definitely not "iPhoto Plus." It lacks a number of iPhoto's features, but in exchange gives you a number of really slick tools aimed at streamlining a digital photography workflow.
    I'd also encourage people to think very carefully before moving a large, well-organized iPhoto library to Aperture. You may lose a fair amount of information, and the result will take a lot of work to "make pretty" again. It does look like a nice program, though. Are you ready to relegate all of your existing pictures to an iPhoto "pre-history" and start over with a blank -- but much fancier -- slate in Aperture?

  • Question about migration from 10.1.0.5 to 10.2

    Hi,
    I've 10g 10.1.0.5 installed (by installing some patches).
    Now I need 10.2.
    Can I reach this with pathches (and which one(s)), or do I have to install from scratch an 10.2 ?
    Any reaction will be appreciated.
    Leo

    Can I reach this with patches No, you have to install the base release of 10.2 and then migrate.
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14238/toc.htm

  • Question about migrating from iPhoto to Aperture 3

    I have been using the free trial of Aperture 3 after importing my iPhoto library with the option chosen of storing the files in their original location. I am now considering purchasing the program. My question is: Should I just carry on, or would it be better (or worse) to import the files into Aperture, placing them in a new Aperture library, then deleting my iPhoto library? I have not done any significant work in the trial so this is the time do redo it if it is preferable. If this question does not make sense then I would appreciate knowing that too. Many thanks!

    Andrew
    One of the ways that Aperture is much more powerful than iPhoto is in how it relates to the Master files.
    From your post I understand that you imported to Aperture leaving the Originals in iPhoto, right?
    There is no need to now move the original files into Aperture. You can leave them where they are, move them elsewhere or bring them over to Aperture. Whichever decision you make Aperture can work with and help you do do it.
    Check out 'Relocate Masters' in the Aperture Help for more.
    Regards
    TD

  • Basic questions? Upgrade from v 1.56??

    Can anybody tell me if you can upgrade from 1.56 to aperture 3? And will that convert my old library so that I use it in the new version?
    I upgraded to snow leopard and now cannot access my old library.
    Any info would be greatly appreciated.
    thanks
    joe
    (Kinda ***** to be forced into upgrading!) Any way to gain access to the contents of my old library without upgrading?

    Sorry, "stinks" is what i meant to say.
    "Kinda stinks to be forced into upgrading"
    (I didn't realize that the word that i used was offensive) Sorry everybody!!
    Any suggestions for getting an answer to my question? I would think that any common user of this forum would know the answer. I was trying to avoid making a phone call.
    The info is greatly appreciated!!
    Can one upgrade normally from v 1.56 to v 3?
    Is the integrity of the old library in tack with the newer version???
    Anybody??
    thanks

  • Question on migrating from JSF 1.2 to JSF 2.0

    My application on JSF 1.2 has a fairly large faces-config.xml file. Just the sort of thing that some features of JSF 2.0 is supposed to reduce. However I find that under Glassfish v3 I can't create managed beans with the annotations and no entries in faces-config. I read the JSF 2.0 spec and I can't see any mention of whether a mix of declarations (XML + Annotations) are permitted.
    Can someone tell me if this is supposed to work, and if it is how Glassfish behaves with regard to this?

    Replace the JSF JAR files. There's a Glassfish updater as well. Documentation is just available at the homepage.

  • Basic question about upgrading from Mac OS X 10.4.11

    Very simple - how do I upgrade my Mac to run the many apps & gadgets which now require more than 10.4.11?
    A friend said I'd have to change to Leopard/S Leopard. But is there another way? I think we might be confusing 2 different issues here.
    Thanks for help.

    No, there is no other way.

  • Creation of domain issues - migration from weblogic 10.3.0 to 10.3.5 versio

    Hello,
    i would like to kindly ask for a help with following issue:
    Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
    The command to run the creation of the domain is following:
    ${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
    returnCode=$?
    SILENT_SCRIPT contains following commands:
    read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
    write domain to "/local/wg372/BM/appl/BmDomain";
    set OverwriteDomain "true";
    close template;
    When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
    2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
    2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
    2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
    java.lang.NullPointerException
         at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
         at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
         at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
         at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
         at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
         at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
         at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
         at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
         at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
         at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
         at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
         at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
         at java.lang.Thread.run(Thread.java:662)
    In Windows env im getting following error:
    create.domain:
    [exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
    [exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
    [exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
    [exec] << write Domain to "J:/_dev/build/BmDomain"
    [exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
    [exec] null
    CFGFWK-60550: - doc says
    CFGFWK-60550: Script execution aborted. The script may contain an error.
    Cause:
    Action:
    Level: 1
    Type: ERROR
    Impact: Configuration
    I tried to google for this issue, look into the weblogic documentation but with no luck.
    So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
    Thanks in advance.

    Hi,
    thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
    Anyway,
    after some googling and testing im again stucked with another issue:
    1. First i have created the old doman (10.3.0)
    2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
    ---> worked fine
    3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
    4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
    wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
    wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
    Error: writeDomain() failed. Do dumpStack() to see details.
    wls:/offline/BmDomain>dumpStack()
    com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
    at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
    at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
    at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(Unknown Source)
    at org.python.core.PyMethod.__call__(Unknown Source)
    at org.python.core.PyObject.__call__(Unknown Source)
    at org.python.core.PyInstance.invoke(Unknown Source)
    at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
    at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
    at org.python.core.PyTableCode.call(Unknown Source)
    at org.python.core.PyTableCode.call(Unknown Source)
    at org.python.core.PyFunction.__call__(Unknown Source)
    at org.python.pycode._pyx24.f$0(<console>:1)
    at org.python.pycode._pyx24.call_function(<console>)
    at org.python.core.PyTableCode.call(Unknown Source)
    at org.python.core.PyCode.call(Unknown Source)
    at org.python.core.Py.runCode(Unknown Source)
    at org.python.core.Py.exec(Unknown Source)
    at org.python.util.PythonInterpreter.exec(Unknown Source)
    at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
    at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
    at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
    at weblogic.management.scripting.WLST.main(WLST.java:173)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.WLST.main(WLST.java:29)
    Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
    at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
    at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
    ... 29 more
    I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
    Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
    Any ideas?
    Ill keep you updated :-)

  • Migrating from Oracle8.0.x to Oracle10g on OpenVMS

    Hello,
    We have the Oracle 8.0.5, which runs on the OpenVMS Version 7.2. The Hp documents show that we must upgrade the OpenVMS to 8.2. However, before upgrading the OpenVMS system and migrating Oracle, we really want to know what steps we need to perform before the migration and a procedure to migrate Oracle8 to the latest Oracle version. We appreciate for any advice.
    Thank you,
    Kelli
    Message was edited by:
    [email protected]
    Message was edited by:
    Kelli

    This forum deals with questions of migrating from non oracle databases to Oracle. For upgrade related questions, I would suggest that you post your question to the Database - General forum. If you have a current Oracle support contract, checkout MetaLink as well.
    Donal

  • Need help in migration from Layer2 to layer3

    HI Guys
    Need u r help in migration from layer2 switched network to layer3.
    here is the setup there are 9 sites connected with a 10gig backbone in a ring.each site has a 6513 but at the data centre site we having two 6513.we are having a combination of voice and data vlans.at present all the sites are connected with layer2 trunks.all the trunks are teminated at the core ie datacentre site.so how should i procedd and what are the advantages of it ie migration.
    Thanks
    Mahmood

    For this migration you first need to assign IP addresses to your connections between switches. This could be /30 (or /31, if supported) subnets. You should also consider running some dynamic routing protocol such as OSPF between switches.
    Hope this helps.

  • Basic questions from a new mozaic owner

    I have some very basic questions about how to use the new mozaic 2G mp3 player. I bought the Mozaic because it has a speaker and sleep timer, but I'm finding it to be much harder to use than other mp3 players that I have had (Ipod shuffle, clix etc). This may reflect my failure to look in the right place but I have to say the "help" section isn't much help.
    Here goes:
    . I download podcasts to listen to during my morning run. WMP provides an easy to find place in its program, "recently added," which allows the user to just work with those files. As near as I can tell, Creative makes you wade through all of your tracks. Is there some way to create a file to which "recently added" tracks, or specific tracks, can be dumped? How about automatic tagging of these added files?
    2. I have several thousand pictures on this hard dri've. Apparently, the Mozaic Centrale
    Is going to copy all of them, which strikes me as a waste of space. Is there a way to shut this function off? I couldn't care less if a single photo was added to the centrale program (or whatever it's called). Is it really going to duplicate all of the jpg files?
    3. I have the Zen Stone plus speaker which has served me very well. I had similar problems working with whatever Zen was calling its media player and wound up using WMP instead. I"d like to take a run at using the dedicated Zen media player....
    I apologize for the basic nature of these questions, but the answers weren't obvious to me from the materials I was able to locate.
    gba

    sineadholly wrote:
    Problem with speaker. I read you need to do a firmware update to get the speaker option on your product's menu so i've completely updated it, but still no option to switch speaker on, and won't just come on when i unplug the headphones, any ideas?
    what exactly is the model of your Mozaic? Is it EZ 00, EZ 300 or plane ZEN Mozaic?

  • How much effort for object migration from CPS Basic to Full version?

    Dear all,
    I've got 2 questions concerning using SAP CPS Basic version first and migrating later to full version, looking for answer(s):
    1. Is it possible to start using the free CPS and then with some tool migrate from many isolation group as to one global ?
    2. Is there any limitation in the number of isolation groups in the free version ?
    If someone have experience, would be great to get feedback.
    Look forward reading from you.
    Best Regards
    Ferry

    Hello,
    1) the product comes with a job to 'De-Isolate' the system when you install a full license. Note that you can only deisolate, it is not possible to go back from full to free.
    2) there is no limitation.
    Regards Gerben

  • Question regarding Exchange ActiveSync migration from Exchange 2003

    Hello,
    I am a bit confused about info about requirements when migrating Exchange ActiveSync (EAS) from 2003 to 2010. Now this question is related to EAS only, forget about other services, such as OWA or Outlook Anywhere, for a while.
    Basically, all migration guides state that you have to configure and setup a legacy url for legacy services for co-existence. Based on that, I have had an understanding that Exchange 2010 CAS cannot proxy EAS users that are still on Exchange 2003, but issues
    a redirect command to EAS client.
    However, this article shows information that, based on my understanding, states that Exchange 2010 CAS DOES proxy EAS clients that are still on 2003: http://blogs.technet.com/b/exchange/archive/2009/12/08/3408985.aspx
    For migration from 2007 EAS to 2010 EAS the article shows redirecting, but not with 2003.
    So my question is: While talking about only EAS, do I need to configure legacy external url/namespace/name resolution or not?
    Thanks for answering!

    Hello,
    I agree with Rajith's suggestion.
    Additional article for your reference.
    http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
    Cara Chen
    TechNet Community Support

  • HT1311 I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

    I know this is a basic question, however, how do i change my pass word on itunes to stop my kids from automatically buying tunes from the I store... as my card details are already saved they just log in with their ipods and download via my account

    http://support.apple.com/kb/HE36
    Regards.

  • HT1848 Forgive such a basic question, it's easier than looking it up.  I have my iTunes music on macbook pro and have only synced it to one iPod.  I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no ch

    Forgive such a basic question, it's easier than looking it up.  I have my iTunes music on macbook pro and have only synced it to one iPod.  I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no charge?

    will I be able to sync my music from computer to new iPod at no charge?
    Yes, you will.

Maybe you are looking for