Basic requirements to view iBooks created by Author?

Hello,
I've been working on a simple iBook as a promotional device to attract investors to a project. While it works fine on my iPad 2, it isn't working with my partners who own the iPad 1.
I've gone through these forums to better understand the requirements needed in viewing books created with Author but I haven't found a consistent answer.
I'm assuming the only update needed for people using older iPads is that they've updated to iBooks 2 - or do they truly need to be running iOS 5 as well?
Thanks -

Not tested - just quoting Apple.
Examples such as yours is why I recommended 5.x - that and a desire to see everyone current, of course.

Similar Messages

HT5071 How to download paid iBook created using iBook Author

I would like to submit a paid iBook created using iBook Author and make it available to download in India. Apple does not support downloading paid iBooks in India. Is there a solution for this. Also, is there an enterprise deployment of iBooks ie limited distribution of paid iBook.

Apple requires that books can only be sold through the Store. See iBooks Author: Publishing and distribution FAQ - Support for details otherwise.
As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Is there an apple approved agreggator that allows me to publish to the iBookstore ibooks created using iBooks author? I would like to use the interactivity that iBooks Author allows but need an aggregator that supports it. Thank you.

Is there an apple approved agreggator that allows me to publish to the iBookstore ibooks created using iBooks author? I would like to use the interactivity that iBooks Author allows but need an aggregator that supports it. Thank you.

Apple - iTunes - Partner Programs - Book Publishers
See a list of Apple-approved aggregators
Start contacting them with your particular needs and see who fits best.
Be sure to understand this info:
Please note that if you choose to work with an aggregator to distribute your content on the iBookstore, Apple's contractual and financial relationship is with that aggregator.

Why I can not find the backgound change button in the iBooks created by the iBooks author?

Every iBooks download in the iBooks store all have this option, why I can not find it in the iBooks created by myself? Is it the benefit for the iBooks store stuffs only?
Thanks for the help in advance!

Those options are only available for books _not_ made using iBooks Author.
iBooks Author outputs a hybrid e-pub of Apple's design that only works on iPad.
Your example above is from a book using a standard e-pub format that works on both iPhone and iPad.
And example of an OS X application that outputs a standard e-pub file is Pages.

BASIC PLANT DATA VIEW in BAPI_MATERIAL_SAVEDATA

HI,
 I need to save some fields in the BASIC PLANT DATA View using BAPI_MATERIAL_SAVEDATA. Would anyone know the HEADER VIEW DATA I need to select and how I am going to go about this?
I am able to successfully save a material but I am having problems in creating the material's BASIC PLANT DATA VIEW.
Thanks!

Check out this code:
*& Report ZBAPI_MATERIAL_SAVEDATA
*& AUTHOR
*& PURPOSE : THIS REPORT USES BAPI MATERIAL SAVE DATA TO UPDATE AND CREATE
*& THE MATERIAL
REPORT ZBAPI_MATERIAL_SAVEDATA NO STANDARD PAGE HEADING MESSAGE-ID (ZHNC).
TYPES:BEGIN OF TY_MAT,
 MATERIAL(4),
 IND_SECTOR(1),
 MATL_TYPE(4),
** BASIC_VIEW(1),
** SALES_VIEW(1),
** PURCHASE_VIEW(1),
* STORAGE_VIEW(1),
 MATL_GROUP(9),
 BASE_UOM(3),
 BASE_UOM_ISO(3),
* MATL_GROUP1(1),
* BASE_UOM1(1),
* BASE_UOM_ISO1(1),
 PLANT(4),
 DEL_FLAG(1),
 PUR_GROUP(3),
 BASE_QTY(13),
* PLANT2(4),
* DEL_FLAG5(1),
* PUR_GROUP1(1),
* BASE_QTY1(1),
* PLANT3(4),
 STGE_LOC(4),
 MRP_IND(1),
* PLANT4(4),
* STGE_LOC1(4),
* MRP_IND1(1),
 SALES_ORG(4),
 DISTR_CHAN(2),
 DEL_FLAG1(1),
 MIN_ORDER(13),
* SALES_ORG1(4),
* DISTR_CHAN1(2),
* DEL_FLAG2(1),
* MIN_ORDER1(1),
 LANGU(2),
 MATL_DESC(40),
 END OF TY_MAT.
DATA: IT_DATA TYPE TABLE OF TY_MAT,
 WA_DATA LIKE LINE OF IT_DATA.
*decalraing flag
data: v_flag value ''.
*DECLARING WORK AREAs TO BE PASSED TO THE FUNCTION MODULE.
DATA: BAPI_HEAD LIKE BAPIMATHEAD,
 BAPI_CLIENTDATA LIKE BAPI_MARA,
 BAPI_CLIENTDATAX LIKE BAPI_MARAX,
 BAPI_PLANTDATA LIKE BAPI_MARC,
 BAPI_PLANTDATAX LIKE BAPI_MARCX,
 BAPI_STORAGELOCATIONDATA LIKE BAPI_MARD,
 BAPI_STORAGELOCATIONDATAX LIKE BAPI_MARDX,
 BAPI_SALESDATA LIKE BAPI_MVKE,
 BAPI_SALESDATAX LIKE BAPI_MVKEX,
 BAPI_MAKT LIKE BAPI_MAKT,
 BAPI_RETURN LIKE BAPIRET2.
*INTERNAL TABLE TO HOLD THE MATERIAL DESCRIPTION
DATA: BEGIN OF IT_MAKT OCCURS 0.
INCLUDE STRUCTURE BAPI_MAKT.
DATA END OF IT_MAKT.
DATA:BEGIN OF IT_RET OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA END OF IT_RET.
*INTERNAL TABLE TO HOLD HEADER DATA
DATA: IT_EXCEL TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
*SELECTION-SCREEN ELEMENTS
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER: FNAME TYPE RLGRAP-FILENAME OBLIGATORY DEFAULT 'C:\Documents and Settings\Administrator\Desktop\MATMAS.XLS' .
PARAMETERS: P_BEGCOL TYPE I DEFAULT 1 NO-DISPLAY,
 P_BEGROW TYPE I DEFAULT 1 NO-DISPLAY,
 P_ENDCOL TYPE I DEFAULT 100 NO-DISPLAY,
 P_ENDROW TYPE I DEFAULT 32000 NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK B1.
*DECLARATION OF EXCELAL TABLE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
PERFORM F_GET_FILE USING FNAME.
START-OF-SELECTION.
PERFORM F_XLS_ITAB USING FNAME
 CHANGING IT_EXCEL.
PERFORM F_MOVE_DATA.
perform F_GET_DATA.
*& Form F_GET_FILE
* text
* -->P_FNAME text
* <--P_SY_SUBRC text
FORM F_GET_FILE USING P_FNAME LIKE FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
 PROGRAM_NAME = SYST-REPID
 DYNPRO_NUMBER = SYST-DYNNR
* FIELD_NAME = ' '
* STATIC = ' '
* MASK = ' '
CHANGING
 FILE_NAME = P_FNAME
* EXCEPTIONS
* MASK_TOO_LONG = 1
* OTHERS = 2
IF SY-SUBRC 0.
MESSAGE E006(ZHNC).
ENDIF.
ENDFORM. " F_GET_FILE
*& Form F_XLS_ITAB
* text
* -->P_FNAME text
* <--P_IT_EXCEL text
FORM F_XLS_ITAB USING P_FNAME
 CHANGING P_IT_EXCEL.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
 FILENAME = FNAME
 I_BEGIN_COL = P_BEGCOL
 I_BEGIN_ROW = P_BEGROW
 I_END_COL = P_ENDCOL
 I_END_ROW = P_ENDROW
TABLES
 INTERN = IT_EXCEL
EXCEPTIONS
 INCONSISTENT_PARAMETERS = 1
 UPLOAD_OLE = 2
 OTHERS = 3
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_XLS_ITAB
*& Form F_MOVE_DATA
* text
* --> p1 text
* <-- p2 text
FORM F_MOVE_DATA .
DATA : LV_INDEX TYPE I.
FIELD-SYMBOLS <FS>.
*--- Sorting the internal table
SORT IT_EXCEL BY ROW COL.
CLEAR IT_EXCEL.
LOOP AT IT_EXCEL.
MOVE IT_EXCEL-COL TO LV_INDEX.
*--- Assigning the each record to an internal table row
ASSIGN COMPONENT LV_INDEX OF STRUCTURE WA_DATA TO <FS>.
*--- Asigning the field value to a field symbol
MOVE IT_EXCEL-VALUE TO <FS>.
AT END OF ROW.
APPEND WA_DATA TO IT_DATA.
CLEAR WA_DATA.
ENDAT.
ENDLOOP.
ENDFORM. " F_MOVE_DATA
*& Form F_GET_DATA
* text
* --> p1 text
* <-- p2 text
FORM F_GET_DATA .
LOOP AT IT_DATA INTO WA_DATA.
MOVE-CORRESPONDING WA_DATA TO BAPI_HEAD.
BAPI_HEAD-BASIC_VIEW ='X'.
BAPI_HEAD-SALES_VIEW ='X'.
BAPI_HEAD-PURCHASE_VIEW ='X'.
BAPI_HEAD-STORAGE_VIEW ='X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_CLIENTDATA.
BAPI_CLIENTDATAX-MATL_GROUP = 'X'.
BAPI_CLIENTDATAX-BASE_UOM = 'X'.
BAPI_CLIENTDATAX-BASE_UOM_ISO = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_PLANTDATA.
BAPI_PLANTDATAX-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_PLANTDATAX-DEL_FLAG = 'X'.
BAPI_PLANTDATAX-PUR_GROUP = 'X'.
BAPI_PLANTDATAX-BASE_QTY = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_STORAGELOCATIONDATA.
BAPI_STORAGELOCATIONDATA-PLANT = BAPI_PLANTDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-PLANT = BAPI_STORAGELOCATIONDATA-PLANT.
BAPI_STORAGELOCATIONDATAX-STGE_LOC = BAPI_STORAGELOCATIONDATA-STGE_LOC.
BAPI_STORAGELOCATIONDATAX-MRP_IND = 'X'.
MOVE-CORRESPONDING WA_DATA TO BAPI_SALESDATA.
BAPI_SALESDATAX-SALES_ORG = BAPI_SALESDATA-SALES_ORG.
BAPI_SALESDATAX-DISTR_CHAN = BAPI_SALESDATA-DISTR_CHAN.
BAPI_SALESDATAX-DEL_FLAG = BAPI_SALESDATA-DEL_FLAG.
BAPI_SALESDATAX-MIN_ORDER = 'X'.
REFRESH IT_MAKT.
IT_MAKT-LANGU = WA_DATA-LANGU.
IT_MAKT-MATL_DESC = WA_DATA-MATL_DESC.
APPEND IT_MAKT.
CLEAR IT_RET.
REFRESH IT_RET.
PERFORM F_CALL_BAPI.
READ TABLE IT_RET WITH KEY TYPE = 'S'.
IF SY-SUBRC EQ 0.
PERFORM F_BAPI_COMMIT.
WRITE:/ 'MATERIAL CREATED OR UPDATED SUCESSFULLY WITH MATERIAL NO',WA_DATA-MATERIAL.
ELSE.
MESSAGE E000(ZHNC) WITH 'ERROR IN CREATING THE MATERIAL'.
*WRITE: / 'ERROR IN CREATIN MATERIAL',IT_RET-MESSAGE.
*PERFORM F_DOWNLOAD.
ENDIF.
*ENDIF.
ENDLOOP.
ENDFORM. " F_GET_DATA
*& Form F_CALL_BAPI
* text
* --> p1 text
* <-- p2 text
FORM F_CALL_BAPI .
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
 HEADDATA = BAPI_HEAD
 CLIENTDATA = BAPI_CLIENTDATA
 CLIENTDATAX = BAPI_CLIENTDATAX
 PLANTDATA = BAPI_PLANTDATA
 PLANTDATAX = BAPI_PLANTDATAX
 STORAGELOCATIONDATA = BAPI_STORAGELOCATIONDATA
 STORAGELOCATIONDATAX = BAPI_STORAGELOCATIONDATAX
 SALESDATA = BAPI_SALESDATA
 SALESDATAX = BAPI_SALESDATAX
IMPORTING
 RETURN = IT_RET
TABLES
 MATERIALDESCRIPTION = IT_MAKT
* UNITSOFMEASURE =
* UNITSOFMEASUREX =
* INTERNATIONALARTNOS =
* MATERIALLONGTEXT =
* TAXCLASSIFICATIONS =
* RETURNMESSAGES =
* PRTDATA =
* PRTDATAX =
* EXTENSIONIN =
* EXTENSIONINX =
APPEND IT_RET.
ENDFORM. " F_CALL_BAPI
*& Form F_BAPI_COMMIT
* text
* --> p1 text
* <-- p2 text
FORM F_BAPI_COMMIT .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
ENDFORM. " F_BAPI_COMMIT

Html5 but when press Shift+Enter in code view, get created a br / tag

WHEN I CREATE a new web page what choose if i want:
HTML 5 page
when press Shift+Enter in code view, get created a tag and NOT tag...? now if choose html5 created tag...

Are you manually selecting an HTML 5 document then?
If I have understood your question correctly, the link I posted should give you a workable answer. It basically changes the default to whether it's an HTML doctype or XHTML doctype. http://www.alistapart.com/articles/dreamweaver/
Closing non–closing elements
XHTML requires you to close non–closing (“empty”) elements including form tags, image tags, horizontal rule tags and break tags. Closing these pesky elements can be one of the most time–consuming tasks in transitioning to XHTML. But you can modify Dreamweaver to do the work for you:
CLOSING THE LINEBREAK.HTM
Let’s start with the simple line break; we’ll change to .
First, find the file called LineBreak.htm in Configuration\Objects\Characters.
Create a backup of LineBreak.htm.
Open LineBreak.htm.
Edit line 17 so that becomes .
Save and close the file.
Open a new HTML document in Dreamweaver and insert a line break.
View Source to be sure it worked.

In material master How to add a new field on Basic data 1 view

Please Help It's very Urgent...
 I have the Requirement that in Material Master a new field reqired to be added on basic data 1 view. This new field should be added just below field Old Material Number( MARA-BISMT).
Can anyone Please suggest the correct way to add the field as per above requirement.
I hope to get quick reply.
Thanks and Regards...
Tanweer Zaki

No need to validate all the other fields is no wear concerened with you, if you have any requirement to validate your field MVKE-LFMAX .
PROCESS BEFORE OUTPUT.
 Verarbeitung vor der Ausgabe
MODULE INIT_SUB.
MODULE GET_DATEN_SUB.
MODULE FELDAUSWAHL.
MODULE SONDERFAUS.
MODULE SONFAUSW_IN_FGRUPPEN.
MODULE FAUSW_BEZEICHNUNGEN.
MODULE FELDHISTORIE.
MODULE BILDSTATUS.
MODULE ZUSREF_VORSCHLAGEN_B.
MODULE REFDATEN_VORSCHLAGEN.
MODULE ZUSREF_VORSCHLAGEN_A.
MODULE SET_DATEN_SUB.
PROCESS AFTER INPUT.
 Verarbeitung nach der Eingabe
MODULE GET_DATEN_SUB.
CHAIN.
 FIELD MVKE-LFMNG.
 FIELD MVKE-AUMNG.
 MODULE MVKE-LFMNG ON CHAIN-REQUEST.
ENDCHAIN.
FIELD MVKE-EFMNG.
FIELD MVKE-SCMNG.
FIELD MVKE-RDPRF.
CHAIN.
 FIELD MVKE-SCHME.
 MODULE MVKE-SCHME.
ENDCHAIN.
CHAIN.
 FIELD MVKE-RDPRF.
 MODULE MVKE-RDPRF.
ENDCHAIN.
CHAIN." to validate your field
 FIELD MVKE-LFMAX.
 MODULE MVKE-LFMAX.
ENDCHAIN.
MODULE SET_DATEN_SUB.
PROCESS ON VALUE-REQUEST.
Selbstprogrammierte Eingabehilfen
FIELD MVKE-SCHME MODULE MEALL_HELP.
FIELD MVKE-RDPRF MODULE MVKE-RDPRF_HELP.
&----
*& Module MVKE-LFMAX INPUT
 text
MODULE MVKE-RDPRF INPUT.
Validate check code
ENDMODULE. " MVKE-LFMAX INPUT
Thanks and Regards,
Pavankumar

Material Master MRP View not be created till Basiv View is created

Hello All,
I need an information where i would like to know if an MRP view in a Material master can be restricted without the creation of the Basic View. Basically an MRP view is getting created even though the Basic View of material master is not there and it needs to be stopped.
Thanks for your inputs.
Ismail

Dear Syed ,
If you want to prevent end users update other material master views , you can apply the concept of SAP note 545380 - FAQ: Authorizations material master , with this you will not more problem with this kind of problem.
Hope this can help you.
Please let me know if my thinking about your question is correct.
best regards,
Carlos Moçatto

Old material number - Field in Basic Data 1 View Material Master

Hai Techies,
We have a field called old material number - MARA-BISMT in material master basic data 1 view. Is that field is just for reference of old material or does it have any effects in the SAP MM when using the material for purchasing or in BOM or so on.
Could any one please highlight me the consequences of using this field to refer a old material number for the new number created.
Thanking you in advance.
Regards,
Kris.S

Hello Kris,
Number under which you have managed the material so far or still manage it,
for example, in another system or in a card index.
You can use the old material number to systematically search for material
master records via matchcodes.
Your understanding for the use of this field is correct.
regards
Ray

Viewing iBooks on a PC

Hello everyone.
I have a few iBooks on my iPod, although the pages are small and some parts are difficult to read. It also requires a lot of scrolling and changing orientation also takes a little time to do. Is it possible to view iBooks on a PC either through iTunes or any other program? Is anyone aware of any plans to make this possible? I have dowloaded an ePub reader, adobe digital editions, although it will not view my protected iBooks. Please help.
Thanks,
Stu

No, there is no way to view protected iBooks on anything other than an iOS device.
Nobody knows if or when Apple is going to release a version of iBooks for OS X or any other OS, but lots of people want them to.

Can new PWA views be created whereby a filter can be set and associate to the view by default? (Project Server 2013 ONLINE)

My main question is: Can new PWA views be created whereby a filter for that view can be set, and associate to the view by default? (Project Server 2013 ONLINE)? and can I have a filter set to filter on person logged on to...
In previous versions of Project Server, when CREATING a PWA view, we were able to apply/ define a filter for that view. Does not seem like it is the case in Project Server 2013 Online. And if I remember, we could also use the URL Guid_view_id.
Please confirm; and / or tell me how-to.
What I was hoping to do is the following... Given that our standard that we have adopted for reporting time is 'My Timesheets' (fyi, Single Mode Entry=ON), we have some resources who have others who do it on their behalf via 'My Tasks' (ie., accomplished
by using the 'Assignment Owner' field, accordingly). Therefore, when entering time on someone else's behalf within 'My Tasks', we like to present the user that is logged in only the tasks that they are are assigned to update on others' behlaf.
I know that there is another more elegant approach to doing this which may be to use the Delegation feature. But since we are trying to stick to Sharepoint Security mode for now, this is not an option for the time being.
Any help appreciated would be greatly appreciated.
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Hi Spiro,
1- You still can define in Project Online a filter in the view settings, it is located just above the category setting. Here is a screenshot of the summary project center view:
2- The view GUID is not anymore in the URL, since the URL triggers an action only on the webpart and not on the whole page. I agree this is annoying since it was great to send a URL with a specific view.
3- Concerning the access to my timesheet versus my task, I'm not sure to get a full understanding but on a general way, it is much more easy to deal with those situation using categories which you cannot do with the SP permission mode.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

JavaHelp 1.0 is required to view the JavaHelp output?????

Hi All,
I'm getting this dialog after I have generated the JavaHelp.
"JavaHelp 1.0 is required to view the JavaHelp output. Please
install the latest version of JavaHelp"
But I have allready installed this "C:\jh1.1.3" and inserted
these 2 System variables "JAVAHELP_HOME" - "C:\jh1.1.3" and
"JHHOME" - "C:\jh1.1.3".
I have allso installed "j2sdk1.4.1_01".
What else needs to be done?
BR
Thomas

I faintly remember a problem with Robohelp and JH1.1.3 a
couple of years ago, I don't know if this was ever resolved.
I have found the following that might help.
Click Here
Just found a link to the following Forum thread on Peter
Grainge's site
Thread
here
Hope this helps.
Brian

Unable to view pdf created in Live Cycle Designer ES2-initially thought to be a user/OS issue

Unable to view pdf created in Live Cycle Designer ES2. I initially thought this was a user / OS issue when I created a document for someone who is new to a MAC laptop. She could not view the document through email. Unfortunately, I began seeing the same error in my own document folders when searching for another document showing as icons instead of a list. I can open the file without a problem although I see the error she sees only while viewing the icons in my folder. I am using a Windows 7 PC. Now, I also know that if the document is downloaded, it can be viewed.
Other notes:
If trying to access the form via the internet, the same error is seen through Chrome, Firefox, and Mozilla but NOT through IE
Everyone seems to have the latest or a very recent READER
The form is compatible with Reader versions 7 and up
Again, downloading from the internet to the computer appears to allow the file to open properly
Document cannot be viewed on the Galaxy Tab 2 via Chrome or the pre-installed Internet Browser, nor can it be viewed through the Reader after download to tablet. I did not try on an Apple iPad.
All parties involved are up-to-date with virus protection.
Below is a link to the exact message received when trying to open the document.
https://www.dropbox.com/s/wmjqzwyriovg9vi/Adobe%20Error.pdf

You're on to something KJ! Yes the form was created in LiveCycle Designer ES2 which came bundled with my Adobe X Pro. I began creating a new form yesterday and found that I could not preview the form, rendering this same "error" instead. I ran a repair on my Adobe and at first it seemed to fix the issue but after making some changes to the form I tried to preview again and couldn't. Here is what I get when I try to preview my forms in Designer ES2:
When I click the OK button, it then gives me that single static page as mentioned above in previous posts.
I searched Adobe yesterday trying to figure out how I could repair the LiveCycle Designer or if there was some sort of patch that I haven't gotten but was not able to find anything.
(Sorry for the delay in response, I've been on vacation.)
Message was edited by: AngelaC

OHS VirtualHost only SSL - redirect to equivalent of IIS HTTP Error 403.4 - Forbidden: SSL is required to view this resource

Hi,
I'm completely new to OHS and have been asked to ensure that a URL that goes to OHS should only be accessible on HTTPS, if accessed by HTTP it should go to the equivalent of IISs
HTTP Error 403.4 - Forbidden: SSL is required to view this resource.
As OHS is the frontend to our SOA installation we have specific files under /moduleconf/ for the virtualhosts, an example of one is below.
Can anyone give me any clues/best practice to only allow this VirtualHost to be allowed on HTTPS/SSL and to not redirect non SSL to SSL but to an error page like the equivalent mentioned above.
Any guidance would be greatly appreciated. Many thanks
<VirtualHost *:443>
ServerName testhub.example.com:443
RewriteEngine On
RewriteOptions inherit
RewriteRule ^$ /osb/hub.asmx [NC,P]
RewriteRule ^/$ /osb/hub.asmx [NC,P]
RewriteRule ^/hub\.asmx$ /osb/hub.asmx [NC,P]
<Location /sbinspection.wsil >
SetHandler weblogic-handler
WebLogicCluster OSB1:8011,OSB2:8011
</Location>
<Location /sbresource >
SetHandler weblogic-handler
WebLogicCluster OSB1:8011,OSB2:8011
</Location>
<Location /osb >
SetHandler weblogic-handler
WebLogicCluster OSB1:8011,OSB2:8011
</Location>
<Location /alsb >
SetHandler weblogic-handler
WebLogicCluster OSB1:8011,OSB2:8011
</Location>
<IfModule ossl_module>
SSLEngine on
SSLProtocol nzos_Version_1_0 nzos_Version_3_0_With_2_0_Hello nzos_Version_3_0
SSLCipherSuite SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_DES_CBC_SHA,TLS_RSA_WITH_AE
S_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA
SSLVerifyClient none
SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/host"
SSLProxyEngine On
SSLProxyWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/host"
SSLCRLCheck Off
</IfModule>
</VirtualHost>

Use https://221.135.134.52/vodacts/
That gives me a certificate error because the server doesn't send an intermediate certificate that chains to a build-in root certificate.

Basic requirements to view iBooks created by Author?

Similar Messages

Maybe you are looking for