Basic Settings for new BW QA Box

Hi All,
i got a problem in BW QA.
The BW QA server was a new one. I have created new requests for all the master data infosources and transported them sucessfully.
The problem is when i opening the infopackage which was transported to QA i am getting a popup with "Caution ! - The transfer method has changed" and when i see in the infopack the processing method was changed to ALE and i could'nt see the PSA option there. The infopack in Dev was with psa.
This is the case with all the infopacks in QA.
Do i need to do any settings as this is a New QA box.
Can anyone send me the basic settings need to done for the new BW qa box document.
Thanks in Advance
Appreciated with Rewards

Ram,
have you created the source systems in QA - that should be done and when you transfer - make sure you have also transferred the datasource ...
Arun
Hope it helps...

Similar Messages

Premiere Basic Settings for MTS

A bit new to Premiere but coming up to speed fast. I have scoured the forums and docs for the following basic questions but have come up empty. However, I am still unclear on what to use for the basic settings for my project to get me the best results. Basically I want to create the project in Premiere and output it as an NTSC DVD via Encore. I have .MTS files from a Canon HG21 shot as either MXP (1920x1080) for some projects and SP (1440x1080) for others and so when I start a project, I:
leave the Project presets but select the Capture Format as HDV
not sure what to set for the Sequence presets.
Would love any guidanceor pointers to the rights docs. Thanks!

I guess the HG21 is an AVCHD camera, it definitely is not HDV. You should use sequence settings that reflect the majority of your material. If 2/3 of your material was shot at 1920 x 1080, use that as the sequence setting and just use the rest of your material in that sequence.

Basic Settings for Stastical Forecasting

Hi Guys,
Could you please provide the basic settings for Statistical forecasting.....
Regards,
Pullaiah.

Hi Pullaiah,
If you are doing stastical forecasting you have to do following setting,
1. if you are running forecast engine at aggregated level then while creating planning area, you should define calculation type "p" for forecast key figure (For disaggregating forecast key figure at detail level)
2.Check the forecastong box while design the planning book in initial tab page.
3.Create forecast profile under the resopective planning area(/SAPAPO/MC96B).
This is the basic setting you have to do before running forecast engine..
Hope this will help you
Regards
Sujay

Basic Settings for BADI

Hi All,
I would like to set BADI to transmit contracts from SRM to MM and I am going >>>Customizing under BADi --> Follow on documents --> Create Contract in back-end but then I do not know how to move.
Could you please explain me basic settings for BADI.How to set and configure ?
Thanks in Advance,
#Bill J.

Bill,
Hi. You would only implement this BADI if you would like to modify the functionality/values of the contract interface to MM.
To do this proceed as follows:-
1) Press the execute button (As per you navigation in SPRO mentioned).
2) Specify an implementation name (Start with a Z or Y) - press enter (You will need a developers key from service.sap.com)
3) Give the implementation a name and SAVE to a transport package
4) Select the interfaces table and navigate (double click) on the method applicable (CONTRACT_INTERFACE_FILL or CONTRACT_PROCESS_TYPE_FILL)
5) Enter the code you would like SAVE & activate.
6) Go back to the implementation (F3 to go back) and activate the implementation (CTRL-F3).
7) Test and if this works transport the development through the landscape.
Cheers
Rob

Basic Settings for Lifecycle planning

Hello All,
I want to maintain the basic settings of Life Cycle Planning to use Like Profile
Transaction: /SAPAPO/MSDP_FCST1 - Lifecycle Planning
My question is; is it a must to use 9AMATNR and 9ALOCNO characteristics in our POS?
I have seen the sentence below in OSS note: 354660
**If you are using a characteristic for a product and do not want to use the 9AMATNR characteristic, you must specify the characteristic you would like to use.The 9AMATNR characteristic must exist in the planning object structure if you want to use it as a characteristic for a product.Only then can a LIKE profile be used.In this regard, see the information on the /SAPAPO/FCST_LIKE user parameter in note 350065.**
What I understand from this sentence is that 9AMATNR is not an obligatory characteristic to use in POS for the purpose of life cycle planning.
However when I do not use 9AMATNR I receive such an error message during the maintenance of Basic Settings for Life Cycle Planning.
*Errors have been found in your Customizing settings
*For detailed information, see consulting note #354660
*The basic settings cannot be saved
*Characteristic for product 9AMATNR is not in the planning object structur
So, does anybody know if is it a MUST to keep the 9AMATNR in the POS for lifecycle planning? May be I am doing wrong something else...
Thanks in advance

While in DP MPOS you are free to choose custom characteristics for location and product, there are certain DP functionalities like Promotion Planning which normally uses 9AMATNR as characteristic for Product. In such cases the DP MPOS in absence of 9AMATNR has an issue. Through this assignment of location and product in the MPOS, system knows the custom characteristic that needs to be mapped to 9AMATNR and 9ALOCNO for product and location.
This is useful during release from DP to SNP also.
Hope this helps.
Thanks,
somnath

Settings for new iphone {streaming}

can someone provide me with the correct settings for new iphone
i am streaming clips via wowza, need top quality/ small file size's

No idea what a wowza is.
What are the specifications for this wowza thing, whatever it is? Is it a server? When you googled the iPhone's video playback capabilities, what did you find?
bogiesan

A mac basic settings for FinalCutStudio

Hi.
I'm planning to buy a mac for editting with final cut studio.
I'm not so sure which one is the best in my case (macbookpro, Imac, MacPro).
I'd like to know finalcut ussers opinion: what are the basic settings a mac must have to operate real nicely FinalCutStudio?
Thanks

Actually, neither FullHD.
FullHD is like Sasquatch.
5D is highly compressed h.264 video, which is mpeg-4 compression.
EX3 is XDCAM, which is mpeg-2 compression.
Not that the cameras can't produce pretty pictures, but they're not FullHD. What is FullHD anyway? If I owned Aiwa, I'd start working on the crappiest camera I could make and call the format "FullHD" and everyone would buy it.
Either camera will produce footage that can easily be transcoded to ProRes or ProRes LT for a smooth post production workflow.
Sounds like you want a MacPro.

Auto code completion settings for new ABAP Editor

Dear all,
I am working in New ABAP editor but i am unable to set auto code completion,
please tell about customising of new ABAP editor for Auto code completion.
Thanks and regards,
Gaurav Sood

Hello,
       1.      Choose Utilities ® Settings.
The User-Specific Settings dialog box appears.
       2.      Choose ABAP Editor.
       3.      Set the new editor mode.
From:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/29dee414483fe1e10000000a11466f/frameset.htm
Regards,
Jorge Diogo

What settings for new clips in my project?

I have some new clips that I need to add to an existing project. The info for the existing project is
DV PAL anamorphic preset and the footage that has been imported and editited to the project was taken from my standard def DVD's and exported to quicktime using MPEG streamclip with these settings
*Compression: Apple DV-PAL*
*Frame-Size: 720x576*
*Frame-Rate: 25*
*Sound: Uncompressed Stereo 48kHz*
I have some new clips to add, which are HD and this is the info
Video Tracks:
h264, 1280 × 720, 30 fps, 9.69 Mbps
Is it best to use the same MPEG streamslips settings and export to Quicktime as per the original footage or is there a better way to preserve the higher quality of the HD file that will still work with the original footage in the project?
Many thanks

I have followed the steps above but the quality is noticably worse than the rest of my footage in the project. I wonder if I am doing it correctly or if I should start a new project?
I export from mpeg streamclip to Apple DV/DVCPRO NTSC :Quality 100% 30 Frames Frame size 720 x 480
I then use JesDinterlacer to perform the standards conversion. I select output then export to quicktime movie and use these settings

How Best to Import iPhone 4 video into Premier Pro CS5 - Settings for new import "sequence preset"?

Shooting video with my iPhone 4 (ATT version) and am trying to import file into Premiere Pro CS5 (5.0.3) running on Macintosh OS 10.6.6.
The problem is that I am simply guessing on how to import sequence, and the result is that I am getting motion artifacts and generally inferior quality. I am using iMovie 11 as my basis for comparison.   Not surprisingly, iMovie 11 imports from iPhone beautifully, but when I've looked around inside of it for properties, there isn't much to see.
From using Apple's built in quicktime "inspector," it is possible to see that iPhone4 video has following properties:
".mov" file
dimensions:   1280 x 720
codecs: H.264, AAC
Color Profile:   HD (1-1-1)
Audio Channels: 1
Total Bit Rate: 10,543
PPRO - PRESET DESCRIPTION:
<my comments in angle brackets>
???? = Question
General
Editing mode: DSLR    < Correct?   Best i could do, perhaps it should be "Mobile Device" perhaps it doesn't matter>
Timebase: 29.97fps
Video Settings
Frame size: 1280h 720v (1.0000)    <from apple quicktime "inpector" window >
Frame rate: 29.97 frames/second     <from apple quicktime "inpector" window >
Pixel Aspect Ratio: ????
Fields: N????
Audio Settings
Sample rate: ?????
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 0
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0
Seeking advice on how to smoothly and *losslessly* import/ingest iphone4 footage into PPro CS5. (I am not worried about exporting for iPhone display, which is what most of the information I can find relates to).
Thanks in advance, Michael

Wow. Thanks Colin.
When I follow your approach, I don't get the same "sequence preset" dialog box popping up.
FU question, though, the motion is frequently jagged. Is there a way to smooth out/increase the quality of the rendering?    I have 16gb ram, Mac Pro.   which is able to handle iPhone video rending fine in quicktime.   (I've tried rendering for "performance" and "memory" but both seem to produce, eh results.).
Michael

Journal book settings for new year

Hi Gurus
Is there any setting that has to be done in journal book when there is change of the year (31.12.2011 ) ?
Now i have changed only the interval numer range (inserting new line with new year )for all document types and changed
the Posting Period Variant (with new year). Are these settings sufficient?
Thanks in advance
Regards

1. Open posting periods OB52
2. Add number ranes for document types if you are using year specific document numbers OBA7
3. Carry forward closing balances to next year(F.07 & F.16)
4. Exchange rates maintenance (OB08)
5. If you have any customized things like year specific data maintenance Z tables, you have to update them.
6. If you are using asset accounting, then AJAB and AJRW can be done.
7. version maintenance in controlling(OKEQ)
Rgds
Murali. N

Jumper Settings for new Hard Disks in RAID

How do i have to jumper new disks which should be added to my RAID. In factory settings they come with the cable select setting. Do i have to set all the jumpers to master or does cable select work too?

I know that setting the drive to slave didn't work when I tried it just for curiosity's sake.
It may vary by drive vendor whether you use 'cable select' or 'master.' My xserve raid's a little busy right now so don't want to pull my drives out to look but I'm think that half my drives are set to 'cable select' (maxtor 250GB drives in my left bank) and the other half (hotachi 500GB drives in the right bank) are set to 'master.'
You'll know pretty quickly if it works or not: when you put the drive carrier into the chassis, the drive carrier's status LED (not the blue activity light but the tri-color LED adjacent to it) red light will either turn to green or not. If it turns green, the system has recognized the drive as a valid candidate, if the LED remains red it has determined the drive is not.
You can also click on the individual drive in RAID Admin to determine individual drive status.
FYI, I use RAID Admin 1.5 w/1.5 firmware, have SFP controllers, dual 512k cache, dual cache batteries

FI settings for New PL

Dear Sap Experts,
MM consultant have created one New plant for our client.
As a FI consultant, should I assign/change/configure any settings based on New plant.
If any settings should I change, Pl send me that settings asap.
It is really appreciate, if anybody send the settings asap.
Venkata Raju

I could find he answer for this question i.e. we have to set Valuation area as Productive in T.Code (CKMSTART)
So if any one get the same problem, you can use this T. code and solve that issue.
Venkata Raju Khottari

Customize default user settings for new RemoteApp logins

Hi all,
I'm poking around with RemoteApp on Windows 2012 R2 and have it set up to use a centralized file share for the user profiles and everything seems to be working ok. Is there a way for me to customize some of the options in a user's profile for the first time
that they fire up a RemoteApp? Is it like a physical desktop where the hidden "c:\Users\Default" profile gets copied into the new user profile? I know once a user saves settings in a RemoteApp (browser bookmarks, default program options, etc....)
it gets saved in their profile on the central file server but I'd like to save them as much time as I can by giving them a precustomized profile.
Thanks

Hi Brian,,
Thank you for posting in Windows Server Forum.
Kindly check below thread where described for editing the rd web page file and some other method to set default user.
How to set default logon domain RD Gateway and/or RD Web
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f02bd61f-d6fd-4c05-b17a-deffcc61a4e9/how-to-set-default-logon-domain-rd-gateway-andor-rd-web?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

Change default security settings for new Discoverer users? How?

Hello, using Discoverer 10g with SSO integration.
I've created two roles and create in advance users in the DB user, granting them
one of the two roles. The two roles privileges for Discoverer are already configured.
This way, when I create the user in the DB before launching Disco, granting the user one or the other role, I should be all set about what the user can or cannot do on Discoverer (Plus).
So far the theory :)
The problem is that the full permission given by Discoverer to each new user override the role settings, so each new user can do everything (instead one of the roles forbids saving and sharing, for example).
I have to go to Disco Admin and uncheck the "Plus/Viewer" checkbox for the user to make roles actually work as expected.
How can I set Discoverer user default as "Cannot do anything" on Plus/Viewer so that roles apply without further admin intervention?
Thanks
Mario

Thanks a lot Rod.
The problem here is we need to allow portal users the ability to access Discoverer Plus without using Disco Admin: once a user is registered in the SSO, he should be able to connect successfully to Discoverer.
So we need creating user privileges on behalf of Disco Admin.
Tough job, but it seems it ca be done.
Regards,
Mario

Basic Settings for new BW QA Box

Similar Messages

Maybe you are looking for